Electrothermal CMU Controlled Mantles The Electrothermal CMU Controlled Mantle features aluminum housing that is tough, chemical-resistant, lightweight and easy to clean. Available in multiple sizes and temperature ranges • Flexible coiled heating elements absorb shock, minimizing the risk of flask breaking • Heating element is attached to a rigid thermal insulating cartridge to ensure maximum heat transfer and support • Heating elements and insulation form an easy-to-replace heating cartridge • Unique air flow through ventilation slots beneath and around the rim and heating cartridge keeps the exterior “cool-to-the-touch” • Stainless steel screen covering the heating element is grounded directly to the cable for added protection • Mantles are double fused for added safety • Non-skid feet and support clamps add stability Certifications: CE, CSA Specifications Material Max Element Temperature Cat. No. CMU0050/CE CMU0050/CEX1 CMU0050/CEX6 CMU0100/CE CMU0100/CEX1 CMU0100/CEX6 CMU0250/CE CMU0250/CEX1 CMU0250/CEX6 CMU0500/CE CMU0500/CEX1 CMU0500/CEX6 CMU1000/CE CMU1000/CEX1 CMU1000/CEX6 CMU2000/CE CMU2000/CEX1 CMU2000/CEX6 CMU3000/CE CMU3000/CEX1 CMU3000/CEX6 CMU5000/CE CMU5000/CEX1 CMU5000/CEX6 Issue 1 Capacity 50ml 50ml 50ml 100ml 100ml 100ml 250ml 250ml 250ml 500ml 500ml 500ml 1000ml 1000ml 1000ml 2000ml 2000ml 2000ml 3000ml 3000ml 3000ml 5000ml 5000ml 5000ml Aluminum case stove painted 450o C (842o F) Electrical Requirements 230v 50/60Hz, 75w 230v 50/60Hz, 75w 230v 50/60Hz, 75w EU Plug 230v50/60Hz, 100w 115v 50/60Hz, 100w 230v 50/60Hz, 100w EU Plug 230v 50/60Hz, 200w 115v 50/60Hz, 200w 230v 50/60Hz, 200w, EU Plug 230v 50/60Hz, 280w 115v 50/60Hz, 280w 230v 50/60Hz, 280w, EU Plug 230v 50/60Hz 380w 115v 50/60Hz, 380w 230v 50/60Hz, 380w, EU Plug 230v 50/60Hz, 500w 115v 50/60Hz, 500w 230v 50/60HZ, 500w EU Plug 230v 50/60Hz, 500w 115v 50/60Hz, 500w 230v 50/60HZ, 500w EU Plug 230v 50/60Hz, 800w 115v 50/60Hz, 800w 230v 50/60Hz, 800w EU Plug 04/10 Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: firstname.lastname@example.org Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.