PDF cURus UL 60950-1, CSA 60950-1

PDF cURus UL 60950-1, CSA 60950-1
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Issued to:
This is to certify that
representative samples of
20160301-E135493
E135493-A32-UL
2016-MARCH-01
VICOR CORP
25 FRONTAGE RD
ANDOVER MA 01810
COMPONENT - POWER SUPPLIES, INFORMATION
TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL
BUSINESS EQUIPMENT
AC Input Power Supply Module
VIA AIM Model AAAbbbbcddewwxxyzz
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 60950-1 and CAN/CSA C22.2 No. 60950-1-07 Information Technology Equipment - Safety - Part 1:
General Requirements
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather
than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issue Date:
2016-02-29
Page 1 of 5
Report Reference #
E135493-A32-UL
UL TEST REPORT AND PROCEDURE
Standard:
Certification Type:
CCN:
UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology
Equipment - Safety - Part 1: General Requirements)
CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information
Technology Equipment - Safety - Part 1: General Requirements)
Component Recognition
QQGQ2, QQGQ8 (Power Supplies for Information Technology
Equipment Including Electrical Business Equipment)
Product:
Model:
AC Input Power Supply Module
VIA AIM Model AAAbbbbcddewwxxyzz
Rating:
See Miscellaneous Enclosure for model details.
Rated Input Voltage: 87 - 264 V AC
Rated Output Voltage: 120 - 370 Vpk
Rated Output Power: 450W Max
See Miscellaneous Enclosure for additional model information and
electrical ratings.
Applicant Name and Address:
VICOR CORP
25 FRONTAGE RD
ANDOVER MA 01810-5424
UNITED STATES
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the
above referenced Standards. The products have been found to comply with the requirements covering the category and the products are
judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on
such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the FollowUp Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up
Service under the indicated Test Procedure.
The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.
UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific
Technical Criteria through to the end of the Conditions of Acceptability.
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.
Prepared by:
Hong Ung
Reviewed by: Dean Baker
Copyright © 2016
Issue Date:
2016-02-29
Page 2 of 5
Report Reference #
E135493-A32-UL
Supporting Documentation
The following documents located at the beginning of this Procedure supplement the requirements of this Test
Report:
A. Authorization - The Authorization page may include additional Factory Identification Code markings.
B. Generic Inspection Instructions i. Part AC details important information which may be applicable to products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of this Test Report.
ii. Part AE details any requirements which may be applicable to all products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of each Test Report.
iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical
standard used to investigate these products. Products are permitted to bear only the Certification
Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report.
Product Description
The VIA AIM is an AC front end power supply module designed for building-in. It accepts a universal AC
input and provides a rectified Vac output (Vpk) that is designed to power a Vicor VIA PFM. The VIA AIM
performs various front end functions and includes a bridge rectifier, EMI filtering, and supplemental transient
protection circuitry.
Model Differences
See Miscellaneous Enclosure for model nomenclature.
Technical Considerations

Equipment mobility : for building-in

Connection to the mains : not directly connected to the mains

Operating condition : continuous

Access location : for building-in

Over voltage category (OVC) : OVC II

Mains supply tolerance (%) or absolute mains supply values : 87-264 Vac

Tested for IT power systems : No

IT testing, phase-phase voltage (V) : N/A

Class of equipment : Not classified

Considered current rating of protective device as part of the building installation (A) : Component for
building-in, see Conditions of Acceptability

Pollution degree (PD) : PD 2

IP protection class : IP X0

Altitude of operation (m) : Up to 5000

Altitude of test laboratory (m) : Less than 2000

Mass of equipment (kg) : 0.032
Issue Date:
2016-02-29
Page 3 of 5
Report Reference #
E135493-A32-UL
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is determined by UL
LLC. When installed in an end-product, consideration must be given to the following:

The investigated Pollution Degree is: 2

The following end-product enclosures are required: Mechanical, Fire, Electrical

VIA AIM was evaluated with an external fuse, Littelfuse 216 series rated 8A.

VIA AIM is designed to be used with an external VDR for transient surge protection. Annex Q
compliant Littelfuse TMOV connected from L1 to L2.

de-rating curve for maximum output power versus case temperature.
Issue Date:
2016-02-29
Page 4 of 5
VIA AIM Model Matrix: AAAbbbbcddewwxxyzz
Example: AIM1714VB6MC7D5T00
AAA = AIM
Product Type
AIM
Single Phase AC Input Module
bbbb = 1714
Package Size Designator (in.)
1714 1.7 x 1.4
c=V
Package Type
V
Chassis mount
B
Board mount
dd = B6
Input Voltage Range
B6
87-264Vac, 50/60Hz
e=M
Range Ratio (Vin high / Vin low)
M
3.1
ww = C7
Output Voltage Range
C7
120-375Vpk
xx = D5
Maximum Output Power
D5
450W
y=T
Product Grade
E
0 to 100°C
C
-20 to 100°C
T
-40 to 100°C
M
-55 to 100°C
zz = 00
Customer Options (non-safety related,
any alpha-numeric combination)
00
No options
Report Reference #
E135493-A32-UL
Issue Date:
2016-02-29
Page 5 of 5
Report Reference #
Vin = 87-264 Vac
Temperature = bottom of case
E135493-A32-UL
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement