ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way P/N: 717001 or P/N: 717001-NP Paso Robles, CA 93447 Telephone: (800) 350-2223 PAGE 1 OF 1 Page Rev. Date: 09-21-15 Fax: (805) 238-4201 CHEVY V8 TO JEEP UNIVERSAL SQUARE OR ROUND FENDER UP TO 1971 KIT CONSISTS OF: No. Qty. Part No. Description 1. 2. 3. 4. 5. 6. CHEVY V8 FENDER WELL HEADER LEFT CHEVY V8 FENDER WELL HEADER RIGHT GASKET - CHEVY V8 2-1/2" COLLECTOR GASKET 2-1/2" COLLECTOR RING HEADER BOLT PACK 1 1 2 2 2 1 717001L 717001R 716550 716562 717513 723799 INSTALLATION PROCEDURES: These headers are designed to fit on the outside of the frame rails. They may require some modifications to the stock fender wells for proper fit. These headers are designed to fit a standard GM head and the header bolts should be torqued to the GM specifications. Due to the welding process, the header flange will sometimes warp slightly. To straighten the header and seal it to the head surface, we recommend bolting the header to the head starting with the center bolts and working outward until all bolts are tight. The header warranty is void if modified or any type of header wrap tape is used. 717001L 717001R Spark plug clearance and plug wire clearance can be an issue on some headers. If you find a clearance issue you can switch your spark plugs out to a header spark plug. These are shorter spark plugs which will normally allow for better boot clearance. These plugs are on average 1/2" shorter than a standard spark plug. The plug on the right is a header spark plug. SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships and parts stores.