3M Scotch Mastic Sealing Tapes - Scotch 2200 Vinyl Mastic Pads

Page 1 of 2
Scotch® 2200, 2210
Vinyl Mastic Pads and Rolls
Data Sheet
__________________________________________________________________________________
Product Description
Scotch Brand 2200 Pads and 2210 Rolls are selffusing, rubber based insulating compounds
laminated to a flexible, all-weather grade vinyl
(PVC) backing. These tape rolls and pre-cut pads
are designed to insulate, moisture-seal and pad all
connections up to 600 volts, and have excellent
resistance to abrasion, moisture, alkalies, acid,
copper corrosion and varying weather conditions
(including sunlight).
Product Features
Polyvinyl chloride (PVC) backing.
Compatible Rubber Mastic.
Flexible over wide range of temperatures.
Highly resistant to ultraviolet light.
Easily installed to provide maximum
protection.
Compatible with all common solid dieletric
cable insulation.
Usable for indoor or outdoor applications.
Applications
(600V maximum)
Bolted connections.
Service drops.
Traffic signal wire connections.
Lighting connections.
Transformer bushing protection.
Padding bolted connections on bus bar.
Grounding rod connection protection.
Terminal protection.
Cable end sealing.
Secondary compression connections.
Data – Average Properties
Backing
Composition – All weather polyvinyl chloride
(PVC) plastic.
Colour
Black
Thickness ASTM-D1000
0.18mm
Breaking Strength ASTM-D1000
35.3N/10mm
Elongation ASTM-D1000
200%
Mastic
Composition – Highly stable synthetic
elastomers and resins.
Thickness ASTM-D1000
Pad
3mm
Roll
2.1mm
Composite (Backing and Mastic)
Thickness ASTM-D1000
Pad
3.2mm
Roll
2.3mm
Adhesion to Steel
ASTM-D1000
22N/10mm width
Adhesion to Polyethylene
ASTM-D1000
22N/10mm width
Dielectric Strength
ASTM-D1000
11kV/mm
Insulation Resistance
ASTM-D257
>1,000,000
megohms
Water Absorption
ASTM-D570
.75%
Specifications
Product
The insulation is a composite of an all-weather
polyvinyl chloride (PVC) backing and a thick
rubber based, pressure-sensitive adhesive. The
product must be applicable at temperatures ranging
from -18°C (0°F) to 38°C (100°F) without loss of
physical or electrical properties.
The product must not degrade when exposed to
various indoor or outdoor environments. It must
also be compatible with all synthetic cable
insulations and jointing compounds. When used in
junction boxes, cable trays or gutters, connectors
shall be over wrapped with at least one-half lapped
layer of glass cloth tape or varnished cambric tape
before applying the product. Or, the entire product
build-up shall be over wrapped with two halflapped layers of an adhesive-coated cloth tape.
Where use involves direct burial or continuous
submersion in water, the product shall be over
wrapped with a minimum of two half-lapped layers
of plastic electrical tape.
WWW.CABLEJOINTS.CO.UK
_________________________________________________________________________________________
3M UK PLC
Electrical Products
3M Centre, Cain Road
Bracknell, Berkshire RG12 1JU
Telephone: 01344 858616
Fax: 01344 858758
3M Ireland
3M UK PLC
Sales Office
Sales Office
TEL3M0044
191 490
House, Adelphi
Centre1547 FAX 0044 191 477 5371 PO Box 393
Dun Laoghaire, Co Dublin, Ireland
Bedford MK41 0YE
TELTelephone:
0044 353
117
977 4647 FAX 0044 117 977Telephone:
5582
1 280 3555
01234 229462
Fax:WWW.THORNEANDDERRICK.CO.UK
353 1 280 3509
Fax: 01234 229433
THORNE & DERRICK UK
Page 2 of 2
Scotch® 2200, 2210
Vinyl Mastic Pads and Rolls
Data Sheet
__________________________________________________________________________________
Engineering/Architectural Specification
All splices for 600-volt wire rated at 80°C (176°F)
and below shall be insulated with “Scotch” Brand
2200 Pad or 2210 Roll. The Vinyl Mastic shall be
protected from sharp edges and external pressure
from heavy objects by at least a one-half lapped
layer of Scotch Brand 27 or 69 Glass Cloth Tape, or
Scotch 2510 Varnished Cambric Tape before
applying Scotch Vinyl Mastic. Or over wrap the
entire Vinyl Mastic build-up with two half-lapped
layers of an adhesive-coated cloth tape.
When directly buried or submerged in water,
splices shall be over wrapped with a minimum of
two half-lapped layers of Scotch Super 33+ or
Super 88 Vinyl Plastic Electrical Tape.
Important Notice
Technical information provided by 3M is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every
user’s application. For this reason 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should
determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s liability for death or personal injury arising
from its negligence. All questions of liability relating to 3M products are governed by the seller’s terms of sale subject where applicable to the prevailing law. If any goods
supplied or processed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the
price paid for the goods or services. Except as set our above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent
permissible at law.
3M and Scotch are trademarks of the 3M Company. Printed in the UK.
© 3M United Kingdom PLC, 2003.
_________________________________________________________________________________________
WWW.CABLEJOINTS.CO.UK
3M UK PLC
Electrical Products
3M Centre, Cain Road
Bracknell, Berkshire RG12 1JU
Telephone: 01344 858616
Fax: 01344 858758
3M Ireland
3M UK PLC
Sales Office
Sales Office
3M0044
House, Adelphi
Centre 1547 FAX 0044 191 477 5371 PO Box 393
TEL
191 490
Dun Laoghaire, Co Dublin, Ireland
Bedford MK41 0YE
TEL
0044 353
117
977
558201234 229462
Telephone:
1 280
35554647 FAX 0044 117 977
Telephone:
Fax: 353
1 280 3509
Fax: 01234 229433
WWW.THORNEANDDERRICK.CO.UK
THORNE & DERRICK UK
Download PDF