D-MON 02 D-CHANNEL MONITOR ADAPTER for EURO-ISDN basic rate access

D-MON 02 D-CHANNEL MONITOR ADAPTER for EURO-ISDN basic rate access
D-MON 02
D-CHANNEL MONITOR ADAPTER for EURO-ISDN basic rate access
• Passive ISDN S-interface tester to monitor
the EURO ISDN (E-DSS1) D-channel protocol
• Rapid diagnosis of ISDN configuration and
operation problems
• Helps saving costs and time in product
development, testing and debugging
• Directly connected to the ISDN socket
• Cost effective design
• Provides socket for the ISDN terminal
equipment eliminating the need for
extra cabling
• Communication with any PC or terminal
via its serial COM port
• Ideal portable tool for tracing, uploading
and analysis of the D-channel protocol
• Small size for mobile use
BRIEF DESCRIPTION
APPLICATIONS
The D-MON 02 is a passive ISDN S-interface tester
that allows to monitor the EURO-ISDN (E-DSS1)
D-channel protocol in both directions. It is a very
small box designed for mobile use and powered by
rechargable batteries or via an AC mains power
adapter. It contains all hard- and software required
to decode and trace the ISDN D-channel protocol.
-
Used by Telecom’s or terminal supplier’s
support technicians for troubleshooting
during installation and setup of ISDN
terminal equipment.
-
RJ45 sockets are provided for the connection to the
S-bus and the ISDN terminal equipment. To upload
and display the trace information the serial port of
the PC has to be connected to the V.24/RS232
interface of the D-MON 02 via a 9-pin D-sub
connector. Communication via the COM port is
independent of make or model of the PC.
Laboratory engineering
Manufacturer’s ISDN lab engineers benefit
from it as an easy to use debug tool for
Layer 2 and Layer 3 development.
It provides extensive routine diagnostics for
the most efficient use of the other highly
sophisticated and expensive protocol testing
equipment or even eliminate the needs of it.
Operation of the unit is possible using any terminal
emulation software. The D-MON 02 is controlled
using simple commands which do not require any
ISDN protocol experience. For enhanced operation
conveniences the PC software WIN-D-MON is
available to use the D-MON 02 as an application in
windows (future option).
ISDN
On site debugging of ISDN call setup problems
-
Product testing and release
Quick diagnostics in case of compatibility
problems connecting different terminal
equipment and/or operation on different
national networks.
NT
D-MON 02
Notebook, etc.
ISDN
Terminal Equipment
V1104741
D-MON 02
FEATURES
Setup and operation:
LED indicators:
User menu for easy setup and operation
No ISDN protocol experience required
Setup can be stored to non-volatile
memory for quick restart
2 LEDs for S-bus power detection
("NORMAL" and "RESTRICTED")
4 LEDs for indication of basic Layer 1
activities ("INFO1", "INFO2", "INFO3"
and "INFO4")
GENERAL
Environmental conditions:
Operation:
0o C to + 40o C
Storage:
- 20o C to + 70o C
Relative humidity:
90%, non-condensing
Dimensions:
150 x 90 x 30 mm (W x D x H)
Monitoring
Layer 1:
Layer 2:
Layer 3:
Display formats:
On screen verbal status messages (can
be disabled
On screen verbal messages giving
complete information (selectable, only
frame type information)
On screen messages giving complete
information (selectable, only message
type information)
Verbal form (interpreted information of
HDLC frames) or transparent HEX dump
Timestamps:
Selectable: none, 1 ms / 1 s
Future option:
Support of ISDN protocol 1 TR 6
Power supply:
Mains adapter input
Rechargeable battery (optional)
Technical data subject to change without prior notice
DATENTECHNIK Intercom GmbH
D-81927 München, Cosimastraße 4, Tel. 089-91 90 21, Fax 089-91 01 618
http://www.datentechnik.com
V1100091
V1100001
9411081G/1.1
10.96
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement