Click on Series name for product info on aimtec.com
Series AM1PS-NZ
1 Watt | DC-DC Converter
FEATURES:








Unregulated
8 Pin DIP Package
Low ripple and noise
High efficiency up to 82%
Operating temperature -40oC to + 105oC
Input / Output isolation 1500 VDC
Pin compatible with multiple manufacturers
Continuous Short Circuit Protection ‡
Models
Single output
Model
Input Voltage
(V)
Output Voltage
(V)
Output Current
max (mA)
Isolation
(VDC)
2.97-3.63
2.97-3.63
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
3.3
5
3.3
5
9
12
15
24
3.3
5
9
12
15
3.3
5
9
12
15
24
303
200
303
200
111
84
67
42
303
200
110
83
67
303
200
110
83
67
42
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
AM1PS-0303S-NZ
AM1PS-0305S-NZ
AM1PS-0503S-NZ
AM1PS-0505S-NZ
AM1PS-0509S-NZ
AM1PS-0512S-NZ
AM1PS-0515S-NZ
AM1PS-0524S-NZ ‡
AM1PS-1203S-NZ
AM1PS-1205S-NZ
AM1PS-1209S-NZ
AM1PS-1212S-NZ
AM1PS-1215S-NZ
AM1PS-2403S-NZ
AM1PS-2405S-NZ
AM1PS-2409S-NZ
AM1PS-2412S-NZ
AM1PS-2415S-NZ
AM1PS-2424S-NZ
Max.
Capacitive
Load (µF)
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
Efficiency
(%)
75
80
76
80
80
81
81
81
76
80
80
81
80
76
80
80
81
82
82
‡- Please note Aimtec product change announcement located here www.aimtec.com/news for product specification changes
effective February 7th 2015.
Input Specifications
Parameters
Voltage range
Absolute Max Rating (1 sec. max.)
Nominal
Typical
3.3
5
12
15
24
3.3
5
12
15
24
2.97-3.63
4.5-5.5
10.8-13.2
13.5-16.5
21.6-26.4
Maximum
VDC
5
9
18
21
30
Filter
Units
VDC
Capacitor
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Capacitance
www.aimtec.com
F 051e R11.B
Conditions
Typical
60 sec
> 1000
20
Tel: +1 514 620 2722
1 of 3
Rated
Units
1500
VDC
MOhm
pF
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1PS-NZ
1 Watt | DC-DC Converter
Output Specifications
Parameters
Voltage accuracy
Short Circuit protection
Conditions
Typical
See tolerance graph
±5
Maximum
Units
%
Continuous with automatic recovery ‡
For 1.0% Vin, 3.3V Model
For 1.0% Vin, Other Model
Load 10 – 100%
Line voltage regulation
Load voltage regulation
Temperature coefficient
Ripple & Noise
±1.5
±1.2
12
±0.03
60
At 20 MHz Bandwidth
% of Vin
%
%/oC
m Vp-p
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load
100 - 300
KHz
oC
Operating temperature
Derating above 85oC
-40 to +105
oC
Storage temperature
-55 to +125
oC
Maximum case temperature
125
Cooling
Free air convection
Humidity
Non condensing
95
%
Case material
Plastic UL94-VO
oC
Lead Soldering Temperature
1.5mm from Lead, 10 sec max.
300
Weight
1.8
g
Dimensions (L x W x H)
0.50 x 0.39 x 0.32 inches
12.70 x 10.00 x 8.20 mm
MTBF
>3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals
Standards
cULus (without 3.3 input and output models)
UL 60950-1
Pin Out Specifications
Pin
1
4
5
6
7
8
Dimensions
Single
- V Input
+V Input
+V Output
No pin
-V Output
No pin
www.aimtec.com
F 051e R11.B
Tel: +1 514 620 2722
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1PS-NZ
1 Watt | DC-DC Converter
Derating
Typical Characteristics
Recommended Circuit for EMI Class B
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R11.B
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Download PDF