ADTS 505 operations manual 2

01/29/2002
3:31 PM
ADTS 505A
adts505a.qxd
ADTS
Page 1
To buy, sell, rent or trade-in this product please click on the link below:
http://www.avionteq.com/Druck-GE-Sensing-ADTS-505-Air-Data-Test-Set.aspx
www.avionteq.com
505
Option
(A)
Air Data Test Set Remote Hand Terminal
n Cockpit control reduces test time
n Enables single operator testing
n Operating features as ADTS 505 front panel
n High accuracy - RVSM compliant system
n Operates up to 18 metres from test set
n Rugged ergonomic handheld design
adts505a.qxd
01/29/2002
ADTS
3:31 PM
Page 2
505
Option
(A)
Air Data Test Set Remote Hand Terminal
Sealing
Weatherproof for flightline use.
Shock/vibration
Designed to meet MIL-T-28800 Class 2.
Conformity
EN61010, EN61326, CE marked.
Physical
Weight: 1.5kg (3.3lbs) nominal.
Dimensions: 210mm x 225mm x 62mm (8.3” x 8.9” x 2.5”).
Case
Aluminium alloy casting with shock absorbing silicone rubber boot
and polycarbonate screen protection.
SUPPLIED AS STANDARD
The hand terminal is supplied with 18m (50 feet) length of screened
multi-core interconnecting cable terminated with mating 6-way
sockets at each end. A fabric carrying bag with space for other
user accessories is also provided.
The ADTS 505 option (A) Remote Hand Terminal significantly
enhances operation of the Druck ADTS 505 Air Data Test Set.
Specifically designed for use with civil aircraft, it utilises the
same front panel display and keypad interface. This enables a
single operator to implement sophisticated test routines whilst
seated in the aircraft cockpit. Aircraft testing time and the
possibility of communication errors are both reduced.
CALIBRATION STANDARDS
The ADTS 505 remote hand terminal does not require calibration.
RELATED PRODUCTS
Druck manufacture a wide range of flight approved pressure sensors
and ground test instrumentation for the aeronautical industry.
Shown below are some of the products currently available.
Additionally, this option removes the need to take the Air Data Test
Set on-board the aircraft, avoiding the risk of interior damage. The
hand terminal is supplied with an 18m long interconnecting lead
which connects it to the ADTS 505 situated outside the aircraft.
The hand terminal is rugged with internal components housed in an
aluminium alloy casting, encapsulated by a shock absorbing silicone
rubber boot. The display is protected by a polycarbonate window for
impact resistance. Adjustable wrist straps and moulded finger grips
ensure secure operator handling.
SPECIFICATION
Display and keypad
Identical to ADTS 505 front panel features. Please refer to the
ADTS 505 datasheet for further information and specifications.
When connected, the hand terminal automatically becomes the user
interface. The ADTS 505 displays a message indicating that full
control is now via the remote hand terminal. Alternatively, the main
test set display can monitor the hand terminal display.
Temperature range
Operating: 0 to 507C
Storage: -20 to 707C
Druck Limited
Fir Tree Lane, Groby
Leicester, LE6 0FH, England
Tel: +44 (0) 116 231 7100
Fax: +44 (0) 116 231 7103
E-Mail: sales@druck.com
Internet: www.druck.com
ORDERING INFORMATION
Please state: ADTS 505 Hand Terminal (option A).
Continuing development sometimes necessitates specification
changes without notice.
Agent:
Download PDF