Isco Product Data
Isco Street Level Installation Tool
Measuring flow and water quality in sewers is
now fast and easy. The Isco Street Level
Installation Tool lets you install your monitoring
system from ground level, eliminating the costs
and hazards of manhole entry.
Pole sections can be combined to access pipe as
deep as 15 feet.
Use the Street Level Installation Tool with the
following Isco flow and parameter sensors:
➤ Area Velocity Sensors
➤ Submerged Probes
➤ Bubble Lines
➤ pH Probes
➤ Dissolved Oxygen Probes
Fast and Simple to Use
The Street Level Installation Tool consists of
a Mounting Ring and a Multi-section Pole.
Rings are available to fit inside 6", 8", 10",
12" and 15" diameter pipes.
Easy to Install – Attach your sensor to the
mounting ring, then slide the ring onto the
rod at the base of the pole and lower it into
the manhole. Pulling the strap collapses the
ring so it can be inserted into the upstream
pipe. Once in place, release the strap,
allowing tension against the wall of the pipe
to hold the ring in place. Remove the pole.
Easy to Remove – Pull on the strap to
collapse the mounting ring for quick
removal.
➤ Temperature Probes
Non-Isco probes can be used as well, but may
require adapting to fit the mounting rings.
The Isco Street Level Installation Tool saves time and eliminates the hazards of manhole entry.
Isco Street Level Installation Tool Specifications
Mounting Rings
Available Sizes
Strap Length
Multi-section Pole
6", 8", 10", 12" and 15"
17.75 feet
5.4 m
Maximum Manhole
Depth (approximate)
15 feet
4.6 m
Type 301 stainless steel, Delrin®, stainless steel
hardware, polypropylene strap
Maximum Length
3 feet
0.9 m
Area velocity sensors, submerged probes, bubble lines,
pH probes, dissolved oxygen probes, temperature probes
Maximum Weight
6.5 lbs.
2.9 kg
Materials
Anodized aluminum, Type 304 stainless steel, Delrin
18 feet
Compatible
Isco Sensors
Maximum Length
(assembled)
5.5 m
Weight (12" ring with strap) 6 lbs.
Materials
150, 200, 250, 300 and 380 mm
2.7 kg
(disassembled)
All brand or product names are trademarks or registered trademarks of their respective holders.
Ordering Information
For a complete Street Level Installation Tool, order:
✓ At least one Multi-section Pole
■
✓ Mounting Ring(s) and Sensor Carrier(s) for your application(s)
■
NOTE: The Isco area velocity sensor does not require a carrier because
it has an integral mounting plate that slips onto the rings.
Description
Part Number
Multi-section Pole (includes instruction manual)
60-3204-012
Mounting Rings (include straps)
For 6" (150 mm) Diameter Pipe
For 8" (200 mm) Diameter Pipe
For 10" (250 mm) Diameter Pipe
For 12" (300 mm) Diameter Pipe
For 15" (380 mm) Diameter Pipe
60-3204-014
60-3204-015
60-3204-016
60-3204-017
60-3204-018
Sensor Carriers (needed to attach probes to rings)
For Submerged Probe Level Sensor
For Bubble Line
For pH Probe with Built-in Exposed
Temperature Probe
For pH Probe and Separate Temperature Probe
For Dissolved Oxygen and Temperature Probe
For Temperature Probe Only
60-3204-005
60-3204-007
60-3204-009
60-3204-004
60-3204-006
60-3204-010
Multi-section
Pole
Maximum Length
17.75 ft.
(5.4 m)
Monitoring
Instrument
;;;
@@@
€€€
ÀÀÀ
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@
€€€
ÀÀÀ
;;;
@@@@
€€€€
ÀÀÀÀ
;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;;
Sensor
Cable
Strap
Flow
Isco, Inc.
www.isco.com
4700 Superior St.
Lincoln, NE 68504 USA
Phone: (402) 464-0231
USA & Canada: (800) 228-4373
Fax: (402) 465-3022
E-Mail: info@isco.com
Isco is continually improving its products and reserves the right to change specifications without notice.
©2003 Isco, Inc.
• Printed in U.S.A. • L-2122 • Rev. 7/03
Mounting
Ring
Sensor
Download PDF