Digital voice recorder (DVR) 2 DSP ××

2 × DSP
Digital voice recorder (DVR)
That’s two times the DSP in the IC-7000 that will leave many base
station rigs in the noise! While it is too early to list all the great features, here are a few to keep you talking!
Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is
available for the four memories. A front panel REC control allows
you to record incoming signals, too! The DVR makes portable contesting or mini-expeditions a breeze!
Improved AGC loop performance
With Multiple AGC loops, you will never experience AGC pumping
from a signal filtered out by the DSP! The digital IF filter and manual
notch filter are included in the AGC loop, so you will never encounter
AGC blocking. As with the 756PROIII and IC-7800, the AGC time constants are adjustable for slow, middle, fast for each operating mode.
Digital IF filters
All the filters you want at your fingertips! You will never have to purchase “Optional” filters as the IC-7000 has 41 different filter widths.
You just dial in the width you want and select whether you want a
sharp or soft filter shape for SSB and CW modes. Then to pull-in
the the weak ones, a quick turn of the the concentric twin PBT
knobs, allow you to either narrow the IF
passband, or shift the entire passband to
IF filter setting screen
eliminate the QRM.
Flexible installation with detachable panel
Smaller than the IC-706MKIIG, the IC-7000 measures only
167(W)×58(H)×180(D) mm*1. With the detachable front panel*2 many
installation possibilities are available.
*1 69⁄16(W)×29⁄32(H)×73⁄32(D) in
*2 An optional separation cable is required
Remote control Microphone
The supplied HM-151 remote control microphone allows you to control often used
functions of the IC-7000. This includes band
hopping with Icom’s Triple Band Stack registers.
2 × MNF (Manual Notch Filter)
2-mode band scope
Pull out the weak signals in crowded band conditions with Icom’s
NEW two-point MNF manual notch filter. Apply 70 dB of rejection to
two signals at once! Notch width is adjustable – wide, medium, and narrow – and
an auto-tuning notch filter is available, too.
Manual notch filter setting
The band scope function lets you watch
conditions around the band. In Center
mode the band scope is centered on the receiving frequency. In Fixed mode the band
scope sweeps a fixed range.
HM-151
2.5-inch color TFT display
with TV screen receive capability
Memory Keyer
The internal memory keyer provides 4 memories for station information or contest exchanges, calling CQ and call sign with up to 55
characters for each memory. The keyer also performs automatic repeat, automatic contest serial numbers, and “cut-numbers”.
The IC-7000’s display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3
background colors and 2 font
styles to suit your preference.
Not only does the display provide radio status, but you can
watch NTSC M or PAL B on
VHF-TV channels!*
Other features
[Installation] • Control circuit for optional antenna tuners
[Operation] • Built-in voice synthesizer • CI-V control capability
• Auto repeater functions • Total of 503 channels • Quick band change
• Multi-function S/PWR/SWR meter • Backlit buttons • 24-hour Clock
[Receiver] • Preamp • Attenuator • 100-step digital noise blanker
• 16-step digital noise reduction • RIT • CTCSS, DTCS tone squelch
[Transmitter] • ±0.5 ppm high frequency stability • Continuously adjustable RF output power • Digital RF speech compressor • Powerful 35W on 70cm band • Bass and treble audio equalizer
• Adjustable SSB transmit bandwidth • DTMF memory • ∂TX • VOX
[CW] • Full break-in • CW reverse sideband • Adjustable CW pitch
* Not available in all versions
One-touch operation
Eight of the most-used radio functions are controlled by dedicated
function keys grouped around the display for easy visibility. One
quick touch turns the function and off. A longer touch activates adjustment of the function’s setting.
SPECIFICATIONS
OPTIONS
GENERAL
RECEIVER
• Frequency coverage*1 :
Receive 0.030–199.999MHz*2 400.000–470.000MHz*2
Transmit 1.800– 1.999MHz
3.500– 3.999MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035MHz*3
7.000– 7.300MHz
10.100–10.150MHz
14.000–14.350MHz
18.068–18.168MHz
21.000–21.450MHz
24.890–24.990MHz
28.000–29.700MHz
50.000–54.000MHz
144.000–148.000MHz
430.000–450.000MHz
• Intermediate frequencies :
SSB/CW/AM/FM
124.487MHz, 455kHz, 16.15kHz
WFM
134.732MHz, 10.700MHz
• Sensitivity (preamp on; except 4–4.5 and 8–9 MHz):
*1 Showing USA version. Varies according to version.
*2 Some frequency bands are not guaranteed. *3 USB only
• Mode
: USB, LSB, CW, RTTY, PSK31, AM,
FM, WFM (Rx only)
• No. of memory channels : 503 (495 regular, 2 call, 6 scan edges)
• Antenna impedance
: 50 Ω (SO-239×2 for HF/50 MHz and
VHF/UHF)
• Power supply requirement : 13.8V DC ±15%
• Operating temp. range : –10°C to +60°C; +14°F to +140°F
• Frequency stability
: Less than ±0.5ppm (+0°C to +50°C)
• Current drain
: Transmit
Max. power 22A
Receive
Standby
1.3A
Max. audio 1.6A
9⁄ ×29⁄ ×73⁄
: 167×58×180 mm; 6 16
32
32 in
• Dimensions (W×H×D)
(projections not included)
• Weight (approx.)
: 2.3kg; 5.1lb
TRANSMITTER
SSB/CW
AM
FM
WFM
0.5–1.8MHz 1.8–29.9MHz 50–54MHz 144/440MHz
–
0.15µV
0.12µV
0.11µV
4.0µV
2.0µV
1.0µV
1.0µV
–
0.5µV (28–29.7)
0.25µV
0.18µV
–
–
10.0µV (76–108MHz)
SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINAD
• Squelch sensitivity
: SSB Less than 5.6µV
FM
Less than 0.3µV
• Selectivity
:
SSB (BW=2.4kHz)
More than 2.4kHz/–6dB
Less than 3.9kHz/–60dB
CW (BW=500Hz)
More than 500Hz/–6dB
Less than 900Hz/–60dB
RTTY (BW=350Hz)
More than 360Hz/–6dB
Less than 650Hz/–60dB
AM (BW=6kHz)
More than 6.0kHz/–6dB
Less than 15kHz/–60dB
FM (BW=15kHz)
More than 12kHz/–6dB
Less than 20kHz/–60dB
• Spurious and image rejection ratio:
HF bands
More than 70dB
50/144/440MHz
More than 65dB
•
•
•
•
•
•
AT-180 HF+50MHz AUTOMATIC ANTENNA TUNER
AH-4 HF+50MHz AUTOMATIC ANTENNA TUNER
AH-2b ANTENNA ELEMENT
CT-17 CI-V LEVEL CONVERTER
HM-151 REMOTE-CONTROL MICROPHONE
SM-20 DESKTOP MICROPHONE
•
•
•
•
SP-10 EXTERNAL SPEAKER
MB-62 MOBILE BRACKET for main unit or the AT-180
MB-105 CONTROLLER MOUNTING BRACKET
MB-65 MOUNTING BASE
Optional OPC-589 is required.
Optional MB-105 is required.
(threshold; pre-amp on)
• MB-106 CARRYING HANDLE
• OPC-1443/OPC-1444 SEPARATION CABLES
OPC-1443: 3.5 m (11 ft), OPC-1444: 5 m (16 ft)
• OPC-589 MODULAR 8-PIN CABLE ADAPTER
For using a 8-pin type microphone.
• OPC-598 ACC 13 PIN CABLE FOR AT-180 (7 m)
• OPC-599 ACC 13 PIN CABLE ADAPTER
For IC-PW1/EURO
• OPC-742 ACC 13 PIN CABLE FOR AT-180 WITH
2 m/70 cm LINEAR AMPLIFIER
• IC-PW1/EURO HF+50 MHz 1 kW LINEAR AMPLIFIER
2 exciter inputs are available. OPC-599 is required.
(except 144MHz IF point)
• Output power
• Audio output power
:
: More than 2.0W (at 13.8V DC)
(8Ω load, 10% distortion)
SSB/CW/RTTY/FM
AM
HF/50MHz
2–100W
1–40W
• Spurious emissions
144MHz
2–50W
2–20W
440MHz
2–35W
2–14W
: Less than –50dB (Below 30MHz)
Less than –60dB (Above 50MHz)
: More than 50dB
: More than 50dB
• Carrier suppression
• Unwanted sideband
suppression
REAR VIEW
Supplied accessories:
• Hand microphone • DC power cable
• Spare fuses
• Key plug
• Electronic keyer plug • ACC cable
This device has not been approved by the appropriate authorities in each country. This device may not be sold or
leased, or be offered for sale or lease, until approval has been obtained. All stated features, appearances, screen
shots and specifications may be subject to change without notice. All screens show simulated pictures.
READ ALL INSTRUCTIONS carefully and completely before using the transceiver.
1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302
Fax: +81 (06) 6793 0013
URL: http://www.icom.co.jp/world/index.html
2380 116th Avenue NE,
Bellevue, WA 98004, U.S.A.
Phone : +1 (425) 454-8155
Fax
: +1 (425) 454-1509
E-mail : sales@icomamerica.com
URL : http://www.icomamerica.com
146A Harris Road, East Tamaki,
Auckland, New Zealand
Phone : +64 (09) 274 4062
Fax
: +64 (09) 274 4708
E-mail : inquiries@icom.co.nz
URL : http://www.icom.co.nz
Unit 9, Sea St., Herne Bay,
Kent, CT6 8LD, U.K.
Phone : +44 (01227) 741741
Fax
: +44 (01227) 741742
E-mail : info@icomuk.co.uk
URL : http://www.icomuk.co.uk
6F No. 68, Sec. 1 Cheng-Teh Road,
Taipei, Taiwan, R.O.C.
Phone : +886 (02) 2559 1899
Fax
: +886 (02) 2559 1874
E-mail : sales@asia-icom.com
URL : http://www.asia-icom.com
Glenwood Centre #150-6165 Highway 17,
Delta, B.C., V4K 5B8, Canada
Phone : +1 (604) 952-4266
Fax
: +1 (604) 952-0090
E-mail : info@icomcanada.com
URL : http://www.icomcanada.com
Communication Equipment
Himmelgeister Str. 100,
D-40225 Düsseldorf, Germany
Phone : +49 (0211) 346047
Fax
: +49 (0211) 333639
E-mail : info@icomeurope.com
URL : http://www.icomeurope.com
Zac de la Plaine, 1,
Rue Brindejonc des Moulinais BP 5804,
31505 Toulouse Cedex, France
Phone : +33 (5) 61 36 03 03
Fax
: +33 (5) 61 36 03 00
E-mail : icom@icom-france.com
URL : http://www.icom-france.com
10C07, Long Silver Mansion, No.88, Yong Ding
Road, Haidian District, Beijing, 100039, China
Phone : +86 (010) 5889 5391/5392/5393
Fax
: +86 (010) 5889 5395
E-mail : bjicom@bjicom.com
URL : http://www.bjicom.com
Crta. de Gracia a Manresa Km. 14,750
08190 Sant Cugat del Valles Barcelona, Spain
Phone : +34 (93) 590 26 70
Fax
: +34 (93) 589 04 46
E-mail : icom@icomspain.com
URL : http://www.icomspain.com
Sopot, 3 maja 54, Poland
Phone : +48 (58) 550 7135
Fax
: +48 (58) 551 0484
E-mail : icompolska@icompolska.com.pl
URL : http://www.icompolska.com.pl
A.B.N. 88 006 092 575
Unit 1 / 103 Garden Road,
Clayton VIC 3168 Australia
Phone : +61 (03) 9549 7500
Fax
: +61 (03) 9549 7505
E-mail : sales@icom.net.au
URL : http://www.icom.net.au
JP98/14190QA
Count on us!
Your local distributor/dealer:
TW03/00288EM
Icom Inc. (Japan), is an ISO 9001 and ISO
14001 certification acquired company.
05WK0070
© 2005 Icom Inc.
Printed in Japan
Download PDF