FWA-3140

Rackmount Internet Security

Platform with 4 Front LAN

Ports/ Dual PCI Expansion

Slots/ LCD Display

Advantech

Internet Security Platform

Copyright Notice

This document is copyrighted, 2004. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties which may result from its use.

CE Notification

The FWA-3140, developed by Advantech Co., Ltd., has passed the CE test for environment specifications when shielded cables are used for external wiring. We recommend the use of shielded cables.

Printed in Taiwan

1st Edition

March 2004

FWA-3140 User Manual --- Page II

Product warranty

Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two year from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. For example, CPU speed, Advantech products used, other hardware and software used, etc. Note anything abnormal and list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

FWA-3140 User Manual --- Page III

Packing List

Before installation, ensure that the following materials have been received:

• One FWA-3140 Internet Security Platform

• One box of accessories

• One warranty certificate

• One CD-ROM for user manual (PDF file)

If any of these items are missing or damaged, contact your distributor or sales representative immediately.

Technical Support and Sales Assistance

If you have any technical questions about the FWA-3140 or any other Advantech products, please visit our support website at:

• http://www.advantech.com.tw/support

For more information about Advantech's products and sales information, please visit:

• http://www.advantech.com

.

FWA-3140 User Manual --- Page IV

Contents

1. General Information....................................... 1

1.1 Introduction......................................................................... 2

1.2 Features................................................................................. 2

1.3 Specifications................................................................... 2

1 . 4 D i m e n s i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1 . 5 M o d e l L i s t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. System Setup............................................... 6

2.1 Removing the cover............................................................................. 7

2.2 Installing Central Processing Unit (CPU)...................................... 8

2.3 Installing Memory Module............................................................9

2.4 Installing Hard Drive........................................................................10

2.5 Installing Compact Flash...................................................11

2.6 Setting LAN Bypass function.........................................................12

Appendix A...................................................15

A . 1 N A M E - 3 1 4 0 M o t h e r B o a r d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6

FWA-3140 User Manual --- Page V

Figures

Figure 1-1: FWA-3140 dimensions................................................................... 4

Figure 1-2: Outlook of FWA-3140......................................................................... 4

Figure 2-1: Front view of FWA-3140.......................................................... 7

Figure 2-2: Removing the cover............................................................. 7

Figure 2-3: Top view of FWA-3140.......................................................... 8

Figure 2-4: Installing Central Processing Unit steps..................................... 9

Figure 2-5: Installing Memory Module steps.................................................. 10

Figure 2-6: Installing Hard Disk Drive steps............................................. 11

Figure 2-7: Installing Compact Flash steps.................................... 12

F i g u r e 2 - 8 : T h e i l l u s t r a t i o n o f L A N B y p a s s f u n c t i o n . . . . . . . . . . . . . . . . . . . . 1 2

F i gu r e 2 - 9: L A N B y pa s s f u n c t i o n j um p s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Fi gure 2-10: S etting LA N By pass f uncti on f rom BIOS .. .. ... .. .. .. .. ... .. .. 14

FWA-3140 User Manual --- Page VI

1

General Information

FWA-3140 User Manual --- Page 1

1.1 Introduction

Conceived as a powerful rackmount Internet Security platform, the FWA-3140 was specifically designed for Internet secure connectivity. Designed with the Intel®

Pentium® 4 processor, it provides high performance and meets the requirements of

Internet security appliances. The system supports Compact Flash for OS and

Internet security applications. This avoids service disruption caused by hard disk mechanical / magnetic failures. In addition, the FWA-3140 can support system memory up to 2 GB DDR memory. Both Compact Flash and memory can be accessed and replaced for software upgrades through an easily removable cover.

Designed with the Plug-and-Serve concept in mind, the FWA-3140 offers four

10/100/1000 Mbps auto-sensing LAN ports in the front panel. There are two LED

Indicators which monitor power and HDD activities. For easy access, the front panel has a 9-pin, RS-232 serial port for local system management, maintenance and diagnostics. The FWA-3140 provides optional 3.5” IDE HDD and 2 PCI slots. It is FCC and CE compliant. Please see the FWA-3140 user manual for more details.

1.2 Features

• 1U rackmount Internet security platform

• Socket 478 Intel® Pentium® 4

• Dual 32-bit/33 MHz PCI expansion slots

• Four 10/100 Fast Ethernet or 10/100/1000 Gigabit Ethernet ports

• Console port for local setting

• Hard drive mounting bracket for 3.5” drive

• LCD display module

• LAN Bypass function

1.3 Specifications

• Processor System:

CPU: Intel Pentium 4 , 3.06G Hz

Max. Speed: 533/400 MHz FSB

L2 Cache: 512/256KB

Chipset: Intel 845GV, ICH4

BIOS: Award 2 Mb Flash

• Memory: Support DDR 266/200, Max. Capacity 2 GB, Socket 184-pin DIMM x 2

• Ethernet: 10/100 Fast Ethernet or 10/100/1000 Gigabit Ethernet, RJ-45 x 4

FWA-3140 User Manual --- Page 2

• Drive Bay: 3.5”HDD x1

• Management: Console RS-232 x1

• Cooling: Fan (15 CFM) x2, Blower x1

• Miscellaneous: Power Switch, 2 LED indicators for Power/HDD, CompactFlash

Socket x1, LCD Display Module x1

• Adapter Power Requirement:

Input: ATX PS, AC 90 ~ 264 V @ 47 ~ 63 Hz, full range

• Operating Environment:

Operating: Temperature 0 ~ 40 °C (32 ~ 104 °F), Humidity 5 ~ 85 %

Non-Operating: Temperature -20 ~ 75 °C (-4 ~ 167 °F), Humidity 5 ~ 95 %

• Dimensions (W x H x D):

1U: 426 x 44.4 x 360 mm (16.7” x 1.7” x 15.7”)

• Weight: 4.5 Kg (9.9 lb)

FWA-3140 User Manual --- Page 3

1.4 Dimensions

Figure 1-1: FWA-3140 dimensions.

Figure 1-2: Outlook of FWA-3140

FWA-3140 User Manual --- Page 4

1.5 Model List

• FWA-3140 A: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, Four 10/100 Fast Ethernet ports supporting one LAN Bypass function.

• FWA-3140 B: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, two 10/100 Fast Ethernet and two

10/100/1000 Gigabit Ethernet ports supporting one LAN Bypass function.

• FWA-3140 C: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, four 10/100/1000 Gigabit Ethernet ports.

FWA-3140 User Manual --- Page 5

2

System Setup

FWA-3140 User Manual --- Page 6

Setting up your FW-3140 requires only a screwdriver and a small amount of time.

Before you begin, you should also gather together all of the device you plan to install, as well as the CPU, RAM, HDD, and etc.

The front panel of FWA-3140 includes a LCD display module, four Ethernet ports, a

RS-232 console port, and two LEDs where one is power LED and another is HDD LED.

On the rear panel, there is a power switch located on the top right hand corner.

Figure 2-1: Front view of FWA-3140

2.1 Removing the cover

There are screws which secure the cover to the chassis. They are along the sides, near the top. Remove them, and then slide the cover to the rear of the chassis.

Figure 2-2: Removing the cover

FWA-3140 User Manual --- Page 7

Figure 2-3: Top view of FWA-3140

2.2 Installing Central Processing Unit (CPU)

1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket actuation lever to the 90-degree directly.

2. Position the CPU above the socket that its marked corner (golden cut edge on the CPU upper corner) matches the base of the socket lever. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then push down the socket lever to secure the CPU.

3. Apply the thermal tape to provide better heat conduction between your CPU and cooling fan. Position the cooling fan on top of the CPU. Align and snap the four hooks of the retention mechanism to the holes on each corner of the module base.

4. Make sure the CPU fan power connector is plugged to the motherboard fan power connector, than installing CPU is completed.

FWA-3140 User Manual --- Page 8

Figure 2-4: Installing Central Processing Unit steps

2.3 Installing Memory Module

Please note that FSB 533 Pentium 4 processor will support DDR333/DDR266 memory module and FSB 400 Pentium 4 processor will only support DDR266 memory module.

1. Unlock a DIMM socket by. Align the notch of the DIMM memory module to match on the socket and insert the DIMM into the socket until the DIMM is properly seated.

FWA-3140 User Manual --- Page 9

2. Press the retaining clips inward to lock the DIMM memory module. Installing memory module is completed.

Figure 2-5: Installing Memory Module steps

2.4 Installing Hard Disk Drive

1. Unscrew each side of the HDD supporting frame on the chassis and pull it out.

2. Put the HDD above the HDD supporting frame and position the screws accordingly.

3. Screw each side of the HDD supporting frame to fix on the chassis.

4. Connect the IDE cable included in the accessory box to the connector on the

HDD. Make sure that the RED wire on the ribbon should be connected to PIN 1 of

HDD.

5. Connect power connector to the HDD. Installing Hard Disk Drive is completed.

FWA-3140 User Manual --- Page 10

Figure 2-6: Installing Hard Disk Drive steps

2.5 Installing Compact Flash

1. Position a CompactFlash disk accordingly in the CompactFlash disk socket and push it inward. Installing CompactFlash disk is completed.

FWA-3140 User Manual --- Page 11

Figure 2-7: Installing Compact Flash steps

2.6 Setting LAN Bypass function

FWA-3140 provides LAN Bypass function showed as Figure 2-8. When system shuts down, LAN1-LAN2 will connect directly to avoid network broken.

Figure 2-8: The illustration of LAN Bypass function

FWA-3140 User Manual --- Page 12

The jump "J4" allows you to set LAN Bypass function. (See J4 pins assignment in

APPENDIX A.1 NAME-3140 MOTHER BOARD)

Pins 1-3: Monitor network mechanism with watchdog timer

Pins 3-5: Turn off LAN Bypass

N. C.: Turn on LAN Bypass

Pins 2-4: Set LAN Bypass enable automatically when system shut down

Pins 4-6: Set LAN Bypass enable / disable via BIOS

Figure 2-9: LAN Bypass function jumps

When jumper keeps on pins 4-6, follow below steps to set LAN Bypass function via

BIOS.

1. Turn on FWA-3140 platform. Then hold down the <Delete> key during the boot process to enter BIOS menu.

2. Move to "LAN Bypass Control" Item

3. Press <PageUp> or <PageDown> key to change the condition option of "LAN

Bypass Control" Item. Condition option [Enabled]: Set LAN Bypass function enable. Condition option [Disabled]: Set LAN Bypass function disable.

4. Press <F10> to save and exit BIOS menu.

FWA-3140 User Manual --- Page 13

Figure 2-10: Setting LAN Bypass function from BIOS

FWA-3140 User Manual --- Page 14

A

Pin Assignments

APPENDIX

FWA-3140 User Manual --- Page 15

A.1 NAME-3140 Mother Board

J3

J4

ATX

CONNECTOR

CN1 / CN12

CN2 / CN4

CN3 /CN6 / CN8

CN5

CN9

CN14

CN15 / CN34

CN16

CN17 / CN24 / CN25

CN23

1. CONNECTORS

DESCRIPTION

Secondary / Primary IDE Bus Connector

FAN power Connector

FAN power Connector

Floppy Connector

Switch and LED

Parallel Port Connector

USB Port Connector

PS/2 KB and Mouse Connector

Com Port Connector

CRT Connector

Clear CMOS

LAN Bypass Control

ATX Power Connector

FWA-3140 User Manual --- Page 16

2. PIN ASSIGNMENTS

CN1 / CN12

PIN NAME

1 IDE_RST

3 D7

5 D6

7 D5

9 D4

11 D3

13 D2

15 D1

17 D0

19 GND

21 #RE0

23 #IOW

25 #IOR

27 RDY

29 DAck

31 IR0

33 ADDR1

35 ADDR0

37 #CS0

39 #HD_ACT

41 Vcc

43 GND

PIN NAME

26 GND

28 NC

30 GND

32 NC

34 66DET

36 ADDR2

38 #CS1

40 GND

42 Vcc

44 NC

2 GND

4 D8

6 D9

8 D10

10 D11

12 D12

14 D13

16 D14

18 D15

20 NC

22 GND

24 GND

CN5

PIN NAME

7

9

11

1 Vcc

3 Vcc

5 Vcc

13 DRVDEN0

15 GND

17 GND

19 GND

21 GND

23 GND

25 GND

PIN NAME

2 INDEX#

4 DRVSLT#

6 DSKCHG#

8

10 MTRON#

12 DRTSLT#

14 STEP#

16 WRTDALT#

18 WRTGATE#

20 TRACK0#

22 WRTPRT#

24 RDDATA#

26 SIDESLT#

CN9

PIN NAME

1 Power SW

3 Reset SW

5 Power LED

7 Standby

9 LAN1 LED

11 LAN2 LED

13 LAN3 LED

15 LAN4 LED

17 IDE LED

PIN NAME

2 Power SW

4 Reset SW

6 Power LED

8 Standby

10 LAN1 LED

12 LAN2 LED

14 LAN3 LED

16 LAN4 LED

18 IDE LED

CN14

PIN NAME

1 STB

3 PD0

5 PD1

7 PD2

9 PD3

11 PD4

13 PD5

15 PD6

17 PD7

19 #ACK

21 Busy

23 PE

25 SLCT

PIN NAME

2 #AFD

4 #ERR

6 #SLIN

8 GND

10 GND

12 GND

14 GND

16 GND

18 GND

20 GND

22 GND

24 GND

26 GND

ATX

PIN NAME

1 3.3V (+)

3 GND

5 GND

7 GND

9 5V STB

11 3.3V (+)

13 GND

15 GND

17 GND

19 5V (+)

PIN NAME

2 3.3V (+)

4 5V (+)

6 5V (+)

8 NC

10 12V (+)

12 12V (-)

14 PS-ON

16 GND

18 5V (-)

20 5V (+)

CN2 / CN4

PIN NAME

1 GND

2 Power

3 NC

CN15 / CN34

PIN NAME

1 Vcc

2 Vcc

3 Data-

4 Data-

5 Data+

6 Data+

7 GND

8 GND

9 GND

10 NC

CN3 / CN6 / CN8

PIN NAME

1 GND

2 Power

3 FANIO

CN17 / CN25

PIN NAME

1 DCD

2 DSR

3 SIN

4 RTS

5 SOUT

6 CTS

7 DTR

8 RI

9 GND

10 NC

CN16

PIN NAME

1 GND

2 Vcc

3 MSDAT

4 MSCLK

5 GND

6 Vcc

7 KBDAT

8 KBCLK

CN23

PIN NAME

1 VGA_R

3 VGA_G

5 VGA_B

7 NC

9 GND

11 GND

13 GND

15 GND

PIN NAME

2 NC

4 GND

6 NC

8 V_SDAT

10 HSYNC

12 VSYNC

14 V_SCLK

16 NC

CN24

PIN NAME

1 DCD

2 SIN

3 SOUT

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 RI

J4

PIN FUNCTION PIN FUNCTION

13 Watch dog (Default) 24 AUTO ON (Default)

35 LAN Bypass OFF 46 GPIO Control

NC LAN Bypass ON

FWA-3140 User Manual --- Page 17