PRIMO-bd

BUILDING PRODUCT DECLARATION
Ventilation products
Page 1 (3)
Issue no 2
Date of latest amendment 2005-06-03
General
Product/product group: Perimeter unit
Designation:
PRIMO a
Manufacturer:
Company Reg. No: SE 556077-8465
SWEGON AB, Sweden
Contact (telephone, fax, e-mail): Swegon: Jonas Åkesson, tel: +46 570 844 40; fax: +46 570 175 40,
E-mail: jonas.akesson@swegon.se
Information about the manufacturer
Quality assurance system established
yes
System secured by:
ISO 9001 certification
no
Other system
Environmental policy established by company management
yes
no
Company affiliated to ICC trade/industry programme
yes
no
Company EMAS registered
yes
no
Environmental management system established
yes
no
System is secured by:
ISO 14001 certification
Other system
Company works with Life Cycle Analysis (LCA)
yes
no
Recommended area of application is outlined in the technical documentation
yes
no
There is clear and responsibly applied labelling on the product/product group
(manufacturer, product designation etc)
yes
no
The labelling is linked to the technical documentation so that the product can be
clearly identified
yes
no
Other details about internal environment work:
Product information
Criteria for environmental labelling of industry products is not available at present
Other labelling or certification:
1 Constituent materials
Details refer to standard products, therefore there may be some deviation depending on choice of variant, accessories etc.
Substance
Proportion Recycled
material
Steel plate, zinc plated
Steel plate, pre painted
Copper
23%
21%
19%
20%
20%
Re-usable Recyclable
material
material
Energy
recoverable
material
For
disposal
100%
100%
100%
Template: Product declaration.dot
Document:PRIMOme0506
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
BUILDING PRODUCT DECLARATION
Ventilation products
Page 2 (3)
Substance
Proportion Recycled
material
Aluminium
Corrugated cardboard
Rubber EPDM and butyl
Plastic, polythene
Comments on the table:
16%
7%
8%
5%
Re-usable Recyclable
material
material
Energy
recoverable
material
100%
100%
100%
100%
100%
For
disposal
100%
100%
100%
The contents of the material is based on PRIMO a W-160-1000. The
table is not complete concerning the share of recycled and recyclable
material.
Manufacturer specifies requirements for environmental declarations, or equivalent
from the supplier
yes
no
Manufacturer specifies requirements for product information sheets in accordance
with Sweden’s Chemical Products Act (cf. ISO 110141) from the appropriate
supplier of chemicals
yes
no
yes, stated
in table
no
The product contains more than 1 per cent by weight of a substance that
appears on Sweden’s Chemicals Inspectorate’s Limitation and/or Prio List
Substances included on Sweden’s Chemicals Inspectorate’s Limitation and/or Prio List and whose
proportion in the product is >1% by weight
Substance
Copper
CAS Number
7440-50-8
Proportion of finished product
19%
2 Production
Production plant requires permit or notification in accordance with
current environmental legislation
Environmental report submitted annually to public authorities in
accordance with current environmental legislation
Environmental statement can be supplied on request
Data on energy consumption and emissions to air, water and soil
from the plant can be supplied on request
yes
no
yes
no
yes
no
yes
no
3 Distribution of finished product
Indicate where the product is manufactured:
Arvika, Sweden
Method of transportation applicable to the product: Usually by long distance truck
Material in packaging:
Single package: cardboard,
Transport: plastic film and wood.
Company affiliated to the Swedish and the German recycling
systems
Company applies a system using re-usable packaging
yes
no
yes
no
Company takes back packaging
yes
no
Template: Product declaration.dot
Document:PRIMOme0506
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
BUILDING PRODUCT DECLARATION
Ventilation products
Page 3 (3)
4 Construction phase
Documented instructions for installation and fitting are available for
the product
Included in the documentation are requirements and
recommendations for:
- safety measures to be used during handling and installation
yes
no
yes
no
yes
no
The product requires a supply of energy for operation during its
intended use (electricity, power fuel, etc.)
The product requires chemicals for operation during its intended use
(coolant, lubrication oil, etc.)
Type of chemical:
yes
no
yes
no
The product produces a pollution load of emissions into air/water
(external environment) during its intended use
During normal maintenance, the product requires:
- consumable materials (type)
yes
no
yes
no
yes
no
yes
no
- handling the goods at the workplace
5 Usage phase
During normal maintenance, the product requires:
- chemicals (type)
Documented instructions are available for the operation and
maintenance of the product
The estimated service life of the product, assuming that operation
and maintenance are carried out in accordance with the
manufacturer’s instruction
25 years
6 Demolition
The product has been prepared for environmentally adopted disassembly
Further information about disassembly:
yes
no
The product can be re-used or handed over to
fragmentation and recycled.
7 Residual products
Refer to section 1, Constituent materials
8 Waste products
Refer to section 1.
9 Indoor environment
A declaration concerning the indoor environment is attached to the
building product declaration
yes
no
Template: Product declaration.dot
Document:PRIMOme0506
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
Download PDF