advertisement
QuickSpecs
Overview
HP BladeSystem c7000 Enclosure
4.
5.
2.
3.
HP BladeSystem c7000 Enclosure - Front View
1.
Device Bay 1
Device Bay 2
Device Bay 3
Device Bay 4
Device Bay 5
8.
9.
6.
7.
Device Bay 6
Device Bay 7
Device Bay 8
Device Bay 9
10.
Device Bay 9
11.
Device Bay 11
12.
Device Bay 12
13.
Device Bay 13
14.
Device Bay 14
15.
Device Bay 15
16.
Device Bay 16
17.
Power Supply Bay 1
18.
Power Supply Bay 2
19.
Power Supply Bay 3
20.
Power Supply Bay 4
21.
Power Supply Bay 5
22.
Power Supply Bay 6
23.
Insight Display
HP BladeSystem c7000 Enclosure - Rear View
1.
Active Cool 200 Fans & fan bays
2.
Interconnect Bays
3.
BladeSystem Onboard Administrator
4.
Power Inputs (single phase model shown)
DA - 12810 North America — Version 52 — December 10, 2013 Page 1
QuickSpecs
HP BladeSystem c7000 Enclosure
Overview
A HP BladeSystem solutions start with either a BladeSystem c7000 or c3000 Enclosure. For the c7000 Enclosure, customers can add c7000 hot-plug power supplies, HP Active Cool Fans, and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure has been selected, the following components can be added: networking interconnect modules, HP ProLiant and Integrity
Server Blades, expansion blades, and Insight Control management software. For information on these options please visit: http://www.hp.com/go/bladesystem .
DA - 12810 North America — Version 52 — December 10, 2013 Page 2
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class c7000 Enclosure
A BladeSystem c7000 enclosure holds up to 16 server and/or up to 8 expansion blades (not exceeding 16 total blades) plus redundant network and storage interconnects. It includes a shared, multi-terabit highspeed mid-plane for wire-once connectivity of server blades to network and shared storage. Power is delivered through a pooled power backplane that ensures the full capacity of the redundant hot-plug power supplies is available to all blades.
Each c7000 enclosure is built with the following functions:
Up to 16 half-height , 8 full-height server blades, and/or 8 expansion blades per enclosure.
NOTE: For information on mixing half-height server blades, full-height server blades, and expansion blades, please see the section titled "Server Blade, Expansion Blade, and Fan Population Guidelines" later in this document.
Up to 4 redundant interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously within the enclosure.
Choice of a single-phase, three-phase or a -48V DC power subsystem for flexibility in connecting to datacenter power.
HP Thermal Logic technology for lower power consumption and airflow.
Four (4) or Ten (10) Active Cool 200 fans as standard. For redundancy and improved power consumption and acoustics; additional Active Cool 200 Fan kits can be added for a maximum of 10 fans.
Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections, redundant interconnect modules, and optional redundant BladeSystem Onboard Administrator management modules.
Lowest cost of ownership.
Full AC redundancy with no power zones.
An BladeSystem Onboard Administrator management module is built in to the enclosure with the following functions:
Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
Reports thermal and power information, including real-time actual power usage per server and per enclosure.
Front-mounted Insight Display for easy management within the datacenter.
Integrated access to all server blade iLOs from a single cable.
Provides integrated access to interconnect bay device management ports from the single
BladeSystem Onboard Administrator cable.
Single sign-on capability for all devices in the enclosure
Role-based security locally and/or with LDAP directory services.
Provides a wizard-based initial setup process for easy configuration.
A BladeSystem c7000 enclosure provides the following benefits:
With local and remote hardware management integrated across the solution, one full enclosure can be managed as easily as one server.
Scalable: Management and network interconnects extend scalability beyond a single enclosure, allowing resources to be pooled and shared across multiple enclosures.
Investment protection: Accommodates multiple server and network designs in one enclosure.
Lower costs per server, in comparison to rack-mounted servers
Lower power consumption, in comparison to rack-mounted servers.
Lower airflow requirements, in comparison to rack-mounted servers
DA - 12810 North America — Version 52 — December 10, 2013 Page 3
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
HP c3000 Enclosure
For customers that need a smaller system the c3000 is the perfect solution. Supporting up to 8 blades and
4 interconnects the c3000 enclosure provides an ideal solution for small and medium businesses and remote sites for more information refer to the c3000 QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP ProLiant & Integrity
Server Blades
Delivering best-in-class performance, choice and reliability on AMD Opteron™, Intel® Xeon® and Intel®
Itanium ® processors for Windows, Linux, Solaris, OpenVMS or HP-UX based servers; the HP portfolio of server blades supports a variety of application requirements for scale-out architectures. HP offers one-, two-, four- , or eight processor server blades, with the widest range of performance, and form factors. For information please visit: http://www.hp.com/go/bladesystem .
HP D2200sb Storage
Blade
Do you need a direct attached or shared storage solution within your BladeSystem enclosure?
Direct attached storage
The D2220sb Storage Blade delivers direct attached storage for c-Class Gen8 blade servers, with support for up to twelve hot plug small form factor (SFF) SAS or SATA Midline hard disk drives or SAS/SATA SSDs.
The enclosure backplane provides a PCI Express connection to the adjacent c-Class server blade and enables high performance storage access without any additional cables. The D2220sb Storage Blade features an onboard Smart Array P420i controller with 2GB flash-backed write cache, for increased performance and data protection. Up to eight D2220sb storage devices can be supported off a single
BladeSystem c7000 enclosure for up to 115.2 TB of capacity.
Two ways to create shared storage with the D2220sb
Use HP StoreVirtual VSA software to turn the D2220sb into an iSCSI SAN for use by all servers in the enclosure and any server on the network. HP VSA software is installed in a virtual machine on a VMware
ESX host server adjacent to the D2220sb. HP StoreVirtual VSA turns the D2220sb into a scalable and robust iSCSI SAN, featuring storage clustering for scalability, Network RAID for storage failover, thin provisioning, snapshots, remote replication, and cloning. Expand capacity within the same enclosure or to other BladeSystem enclosures by adding additional D2220sb Storage Blades and HP VSA licenses. A cost effective bundle of the D2220sb Storage Blade and a HP StoreVirtual VSA license makes purchasing convenient. If storage needs increase, add HP P4300 or P4500 systems externally and manage everything via a single pane of glass.
The HP StoreEasy 3830 Gateway Storage Blade is a flexible storage server solution for BladeSystem environments. Combine the StoreEasy 3830 with the D2220sb Storage Blade to enable file serving and iSCSI shared storage inside the BladeSystem enclosure.
NOTE: The D2220sb requires a c7000 Enclosure configuration with 10 fans.
For more information, please visit: http://h18004.www1.hp.com/products/quickspecs/14507_na/14507_na.html
DA - 12810 North America — Version 52 — December 10, 2013 Page 4
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
HP Ultrium Tape Blades
Tape blades are ideal for HP BladeSystem c-Class customers who need a data protection solution but are not connected into a Storage Area Network (SAN). They provide direct attach data protection for the adjacent server and network backup protection for all other data within the enclosure. The HP tape blades are the industry's first bladed tape drives and are developed exclusively for the BladeSystem c-Class enclosures.
For more information, please visit: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
.
Dynamic Power Capping
HP Dynamic Power Capping is the industry's first and only power capping solution that lets you reclaim trapped power and cooling capacity without putting electrical infrastructure or server performance at risk.
The enclosure Dynamic Power Cap will be shared amongst all of the installed devices and individual server caps will be changed to match the server load. This will optimize the performance of the servers while ensuring that the enclosure stays below the cap value.
Rack Airflow
Requirements
Rack 10000 G2 series cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The G2 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
NOTE: For operation with the DC Input Module the G2 1000 Series Rack Extension is required to allow DC
Power Cabling to be installed.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
The clearance from face of rack to inside of the front door needs to be 1.75" minimum.
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).
Depth: Minimum 39.4 inches (1000mm) for AC power, 47 inches (1200mm) for DC Power Input
Adjustable rack rails are shipped with each enclosure:
Minimum rail length: 25 inches (635mm)
Maximum rail length: 34 inches (864mm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
DA - 12810 North America — Version 52 — December 10, 2013 Page 5
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
Factory Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging. HP products supported through Factory Express include: a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Simple Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator .
HP Insight Management software
Insight Management Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.
HP Insight Management lowers the cost of running your HP ProLiant servers by providing you with best-in-class management tools, including HP Insight
Control, HP Virtual Connect Enterprise Manager (VCEM), and HP Insight
Dynamics / Matrix Operating Environment. Insight Management increases your productivity and reduces your operating costs to get you higher value from your HP ProLiant servers.
Electronic download of Insight Management Media
Insight Management software media is available for free download (not including license entitlement certificates) at this website: http://www.hp.com/go/insightupdates .
Software media available for download includes:
HP Insight Control
HP Insight Control for Microsoft® System Center
HP Insight Control for VMware vCenter Server
HP Virtual Connect Enterprise Manager (VCEM)
HP Insight Dynamics / Matrix Operating Environment
Customers will receive an Insight Control or Insight Dynamics license entitlement certificate via physical shipment or email. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s).
DA - 12810 North America — Version 52 — December 10, 2013 Page 6
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c7000 Enclosure
One year of 24x7 Software Technical Support and Updates are included with your purchased licenses.
HP provides a complete range of installation and support services to ensure the successful deployment and operations of your server infrastructure. For more information about support services and licensing options, see the following website: http://www.hp.com/go/insightsoftware
Insight Software Media Kit (DVDs)
Physical media (DVDs) are also available for purchase from HP or from your authorized reseller
Service Pack for ProLiant Customers should use the HP Service Pack for ProLiant (SPP) to perform firmware, driver, and related software updates.
HP Integrated Lights-Out
(iLO)
HP Insight Control
HP Matrix Operating
Environment
SPP main webpage: www.hp.com/go/spp
SPP downloads webpage: www.hp.com/go/spp/download
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and can be accessed from any location via a web browser. HP iLO works hand-in-hand with HP Systems Insight Manager, Insight Control and Insight Dynamics for
ProLiant, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: www.hp.com/go/iLO .
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see http://www.hp.com/go/insightcontrol .
HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is an integrated command center that helps you instantly adjust to dynamic business demands. This advanced infrastructure management software lets you reduce the cost of common data center tasks by up to 40 percent while keeping pace with your changing business.
The HP Matrix OE includes the automated provisioning, optimization, and recovery management capabilities for HP CloudSystem Matrix, the ideal platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe .
DA - 12810 North America — Version 52 — December 10, 2013 Page 7
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
HP Power Advisor
The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power consumption and proper selection of components including power supplies at a system, rack, and multirack level. A variety of additional features are also provided including a condensed bill of materials, a cost of owner ship calculator, and a power report. The HP Power Advisor allows for the mixing of rack, tower, blade, and other products in a single environment.
Available at: www.hp.com/go/hppoweradvisor
Warranty
Warranty - This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.
Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and exclusions apply
Enclosure options: Fans, Power Supplies, BladeSystem Onboard Administrator, 1 Year parts only or enclosure warranty
HP BladeSystem Interconnects: 1 Year parts and labor, on-site regardless of the warranty period for the system in which they are installed
HP Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of the warranty period for the system in which they are installed
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
DA - 12810 North America — Version 52 — December 10, 2013 Page 8
QuickSpecs
Service and Support
HP BladeSystem c7000 Enclosure
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP servers and software. You can choose the type and level of service that is most suitable for your IT and business needs. HP Proactive
Care delivers high levels of system availability through proactive service management and advanced technical response. HP Datacenter Care provides highly flexible environmental support to address unique customer business needs.
Choose a recommended service appropriate to your ISS or Integrity product or contact your HP sales representative or authorized HP ServiceOne partner for additional HP Care Pack services information.
Recommended HP Care Pack Services for your HP product
Optimized Care 3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping optimize your systems and delivering high levels of availability through proactive service management and advanced technical response. Hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request. A Technical Account Manager, as your single point of contact, will own your call or issue end to end until resolved.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
.
Standard Care
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c7000 enclosure
Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, Ethernet
Interconnects and Virtual Connect) and software installation and startup of a BladeSystem c7000
Infrastructure in a single enclosure including deployment of OS (two servers), HP Insight Control and Server
Deployment (formerly RDP).
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
.
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual
Connect to facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
.
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including rapid access to our Advanced
Solution Center to manage and prevent problems and a Technical Support Specialist with a broad level of technical knowledge that will engage with additional technical expertise as needed from HP's vast global resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
.
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c7000 enclosure
Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, Ethernet
Interconnects and Virtual Connect) and software installation and startup of a BladeSystem c7000
Infrastructure in a single enclosure including deployment of OS (two servers), HP Insight Control and Server
Deployment (formerly RDP).
DA - 12810 North America — Version 52 — December 10, 2013 Page 9
QuickSpecs
Standard Care
HP BladeSystem c7000 Enclosure
Service and Support
Related Services
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
.
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual
Connect to facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
.
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager who can bring best practices from across the industry plus extra technical skills to your IT team. This option is only available as an add-on to HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf.
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc .
Recommended HP Care Pack Services for your HP Integrity product
Optimized Care 3- Year HP Critical Service
This service offers high performance reactive services and proactive components designed to minimize planned and unplanned downtime. The key feature of this service is an assigned support team including an
Account Support Manager (ASM), Remote Support Account Advocate, Mission Critical Hardware Specialist and access to HP's Global Mission Critical Solution Center to help resolve complex issues faster. Reactive support components of this service include 24x7 HW and SW coverage, 6-hour Call-to-Repair commitment, enhanced parts inventory and accelerated escalation management.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1613ENW.pdf
.
HP Integrity C7000 Enclosure Startup Service
This service provides efficient and effective HP Integrity Blade infrastructure setup for the server infrastructure including all hardware and networking components.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA1-1651ENW.pdf
.
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual
Connect to facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
.
3-Year HP Proactive 24
This service offers improved stability, availability, and operational effectiveness through integrated hardware and software support services that combine industry-leading reactive technical assistance with proactive account services delivered by an ASM, giving you IT management support with a team of service specialists. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENW.pdf
.
HP Integrity C7000 Enclosure Startup Service
This service provides efficient and effective HP Integrity Blade infrastructure setup for the server infrastructure including all hardware and networking components.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA1-1651ENW.pdf
.
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual
Connect to facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
.
DA - 12810 North America — Version 52 — December 10, 2013 Page 10
QuickSpecs
HP BladeSystem c7000 Enclosure
Service and Support
Related Services
Insight Online/Insight
Remote Support
HP Factory Express
When you add additional enclosures to your environment, consider HP Factory Express. HP Factory
Express provides customization and deployment services along with your storage and server purchases.
You can customize hardware to your exact specifications in the factory-helping speed deployment.
http://hp.com/go/factoryexpress .
HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. This comes at no additional cost with your HP solution. Learn more about Insight Remote
Support http://www.hp.com/go/insightremotesupport and Insight Online http://www.hp.com/go/insightonline .
NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single HP
BladeSystem enclosure must be at the same service level.
HP Support Center
Parts and Materials
For more information
Personalized online support portal with access to information, tools and experts to support HP business products. Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc .
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
HP will provide HP-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction.
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem .
DA - 12810 North America — Version 52 — December 10, 2013 Page 11
QuickSpecs
Pre-configured Models
HP BladeSystem c-Class Server Blade
Enclosures
HP BladeSystem c7000 Enclosure
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated
Models" section of this QuickSpecs.
HP BLc7000 Platinum Enclosure with 1 Phase 6 Power Supplies 10 Fans ROHS 16
Insight Control Licenses
681842-B21
681840-B21 HP BLc7000 Platinum Enclosure w/ 1 Phase 2 Power Supplies 4 Fans ROHS Trial Insight
Control License
NOTE: c7000 Platinum enclosures (PNs 681840-B21 and 681842-B21) come standard with increased mid-plane bandwidth, intelligent infrastructure (2400W Platinum Hot
Plug Power Supplies, Intelligent Power Module for Power Discovery Services, and
Location Discovery Services), a BladeSystem Onboard Administrator with KVM, 15 device bay blanks, and one WW 250W C19 - C20 2.0m Jumper Cord per power supply.
DA - 12810 North America — Version 52 — December 10, 2013 Page 12
QuickSpecs
Smart Buys
Smart Buy Models
HP BladeSystem c7000 Enclosure
HP c7000 2xVC-10D 6P10F 16xIC Encl/S-Buy
Includes: c7000 Platinum enclosure with 2 Virtual Connect Flex-10/10D modules, 2 On
Board Administrator modules, 6 Platinum Power supplies, Single Phase Intelligent
Power Module, 10 fans and 16 Insight Control Licenses
HP c7000 2xVCFF 6P10F 16xIC Encl/S-Buy
Includes: c7000 Platinum enclosure with 2 Virtual Connect FlexFabric modules, 2 On
Board Administrator modules, 6 Platinum Power supplies, Single Phase Intelligent
Power Module, 10 fans and 16 Insight Control Licenses
714683-S21
714684-S21
DA - 12810 North America — Version 52 — December 10, 2013 Page 13
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends contacting your local sales representative for information on Factory Integrated Model product offerings and requirements.
For a complete configuration of the HP BladeSystem, please do the following:
Step 1: Select desired model, configuration and quantity of HP ProLiant server and expansion blades
NOTE: HP BladeSystem c3000 and c7000 enclosures may support G1 through Gen8 server blades and Integrity server blades in the same enclosure, subject to support requirements of the Onboard Administrator. Please review the links below to specific blades for details.
NOTE: HP ProLiant Gen8 server blades and certain options require the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
.
NOTE: For server and expansion blade (storage, tape, and PCI Expansion) information, please visit: http://www.hp.com/go/bladesystem .
Step 2: Determine quantity of HP BladeSystem c-Class Enclosures to purchase and choose
Required Options (One of the following from each list unless otherwise noted):
NOTE: Each HP BladeSystem c-Class Server Blade Enclosure holds up to 16 half-height blades. Server blanks will be shipped in all empty bays.
Required Options (one of the following from each category unless otherwise noted)
HP BladeSystem BLc7000 c-Class Server Blade
Enclosures
HP BLc7000 Configure-to-order Platinum Enclosure with ROHS Trial Insight Control
License
HP Integrity BLc7000 CTO Enclosure
681844-B21
AD361D
NOTE: The above enclosures include one BladeSystem Onboard Administrator with KVM and 4 Active Cool 200 Fans. The power module, power supply kits, power cables, interconnects, etc are added per the steps below.
NOTE: All c-Class enclosures support HP ProLiant, Integrity and blades in either mixed or homogenous configurations. The AD361D enclosure is suggested for configurations primarily used with Integrity blades.
HP c-Class Power Systems c-Class Power Modules (1 per enclosure)
HP BLc7000 Single Phase FIO Intelligent Power Module
NOTE: This option enables HP Power Discovery Services; with the correct power supplies (see power supplies below that match/enable HP Power Discover Services).
HP BLc7000 1 PH FIO Power Module Option
NOTE: This option disables HP Power Discovery Services.
HP BLc7000 3 PH Intl FIO Power Modue Option
NOTE: This option disables HP Power Discovery Services.
677595-B21
413379-B21
413381-B21
HP BLc7000 3 PH NA/JP FIO Power Module Option
NOTE: This option disables HP Power Discovery Services.
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply Option Kits are needed. For full redundancy 6 Power Supply Option Kits are required.
HP BLc7000 -48V DC Power Input Module
NOTE: This option disables HP Power Discovery Services.
413380-B21
AH331A
DA - 12810 North America — Version 52 — December 10, 2013 Page 14
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
c-Class Power Supply (Up to 6)
NOTE: Mixing of Power Supplies Is Not Supported on BladeSystem c7000 Enclosures, except during hot swaps to different level power supplies. The Onboard Administrator will exhibit a mismatch error due to mixed power supplies until all power supplies are matched.
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply Option Kits are needed. For full redundancy 6 Power Supply Option Kits are required.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publically posts the results on 80Plus.org."
HP 6X 2650W Platinum Hot Plug FIO Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: The bundle includes a quantity of 6 HP 2650W Platinum 94% PSU so a full enclosure can be configured with a single part number.
NOTE: Includes six WW 250W C19 - C20 2.0m Jumper Cords.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2650W, 94%: Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80
Plus Platinum.
HP 2650W Platinum Hot Plug Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2650W, 94%: Climate Savers Computing Initiative Platinum and ECOS Consulting 80
Plus Platinum.
HP 6X 2400W Platinum Hot Plug Factory Integrated Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: The bundle includes a quantity of 6 HP 2400W Platinum 94% PSU so a full enclosure can be configured with a single part number.
NOTE: Includes six WW 250W C19 - C20 2.0m Jumper Cords.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2400W, 94%: Climate Savers Computing Initiative Platinum and ECOS Consulting 80
Plus Platinum.
HP 2400W Platinum Hot Plug Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2400W, 94%: Climate Savers Computing Initiative Platinum and ECOS Consulting 80
Plus Platinum.
HP 6X 2400W Gold Hot Plug Factory Integrated Power Supply Kit
NOTE: This option disables HP Power Discovery Services.
NOTE: Includes six WW 250W C19 - C20 2.0m Jumper Cords.
NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so a full enclosure can be configured with a single part number.
HP 2400W Gold Hot Plug Power Supply Kit
NOTE: This option disables HP Power Discovery Services.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
733460-B21
733459-B21
517521-B22
588603-B21
517521-B21
499243-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 15
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
HP Cooling Options
HP 2250W -48VDC Hot Plug Power Supply Kit
NOTE: This option disables HP Power Discovery Services.
NOTE: Only compatible with -48V DC Power Input Module.
c-Class Active Cool Fan (Up to 6)
HP BLc 6X Active Cool 200 Factory Integrated Fan Option
NOTE: The bundle includes a quantity of 6 HP Active Cool 200 Fans so a full enclosure can be configured with a single part number.
HP BLc7000 Enclosure HP Single Active Cool Fan Option Kit
NOTE: A minimum of 4 Active Cool 200 Fans is required, 8 Active Cool 200 Fans can support a full blade enclosure, 10 Active Cool 200 Fans should be ordered for reduced power consumption and noise reduction.
NOTE: Single-phase models may require additional power supplies. Fans should be added to provide redundancy, reduce power consumption and reduce noise.
NOTE: Three-phase models require a minimum of 6 Active Cool 200 Fans.
NOTE: Some blade configurations require 10 fans.
AH332A
517520-B21
412140-B21
Step 3: Select optional software bundle (if nothing is selected system will ship with 16
Insight Control Trial Licenses):
HP Insight Software Enclosure Options
C6N32ABE HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 8 Svr FIO
Electronic License
NOTE: This license supports HP ProLiant c-Class blade servers.
NOTE: Must be purchased as an option to an HP BladeSystem enclosure. FIO can only be ordered as part of a factory-configured platform. Customer will receive a printed license entitlement certificate via physical shipment.
Step 4: Select optional Redundant BladeSystem Onboard Administrator Capability
HP c-Class Enclosure
Options
HP BLc7000 Onboard Administrator with KVM Option
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM. The HP c7000 OA with KVM must be the active OA to provide the enclosure KVM feature. The
KVM menu has an OA CLI button at the bottom, which allows an OA administrator to log into the OA and be able to force a takeover so the OA with KVM will become the standby
OA. The OA Firmware Sync feature cannot be used to update mismatched OA modules.
Mismatched OA firmware versions between the original c7000 OA and c7000 OA with
KVM require the administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp, local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (part numbers 681844-B21 and AD361D) come with a BladeSystem Onboard Administrator with KVM as standard. Order this part number (456204-B21) when a second redundant BladeSystem Onboard Administrator is desired for a c7000 enclosure.
NOTE: HP ProLiant Gen8 server blades and certain options require the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
.
456204-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 16
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c7000 Enclosure
Step 5: Select 1 or more interconnect modules for each enclosure
The following is a list of various HP BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel, InfiniBand, and SAS interconnects). A pair of interconnects must be ordered if redundancy is required. For detailed interconnect options consult the specific interconnect QuickSpecs: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
.
NOTE: Options for specific c-Class interconnects are NOT included in the list below. Consult the individual interconnect QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
NOTE: Interconnect Bay 1 must contain one of the "Ethernet" interconnect modules.
HP BladeSystem c-Class Ethernet
Interconnects
HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
638526-B21
662048-B21
HP BladeSystem c-Class Network
Interconnects
HP SAS Switch
HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
NOTE: Includes 2 x HP Virtual Connect FlexFabric 10Gb/24-port modules plus 1 x VCEM
BL-c7000 enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate must be redeemed online or via fax to obtain the VCEM license activation key.
HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HP 6125G Ethernet Blade Switch
HP 6125G/XG Ethernet Blade Switch
HP X130 10G SFP+ LC SR Transceiver
HP B-series 16Gb SFP+ Long Wave 10km Transceiver
HP 6120G/XG Ethernet Blade Switch
HP 6120XG Blade Switch
HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
Mellanox SX1018HP Ethernet Switch for c-Class BladeSystem
Cisco Catalyst 1/10GbE 3120X Blade Switch
Cisco Catalyst 1GbE 3120G Blade Switch
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
HP GbE2c Layer 2/3 Ethernet Blade Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. The above interconnects must be ordered in quantities of two for redundancy support.
HP 6Gb SAS Switch Single Pack for HP BladeSystem c-Class
HP 6Gb SAS Switch Dual Pack for HP BladeSystem c-Class
638526-B21
605865-B21
571956-B21
658247-B21
658250-B21
JD092B
QK725A
498358-B21
516733-B21
406740-B21
538113-B21
689638-B21
451439-B21
451438-B21
410916-B21
641146-B21
657787-B21
438030-B21
BK763A
BK764A
DA - 12810 North America — Version 52 — December 10, 2013 Page 17
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
NOTE: Please see the 6Gb SAS Switch QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/13960_na/13960_na.html
(Worldwide)
HP BladeSystem c-Class SAN Interconnects
HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem
HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem
HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for BladeSystem c-Class
Brocade 8/24c SAN Switch for BladeSystem c-Class
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
Optional Network
Cabling
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9124e Switch for BladeSystem c-Class 12-port Upgrade LTU
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
HP B-series 8/12c SAN Switch for BladeSystem c-Class 12-port Upgrade RTU
Hardware
Optical Transceivers (SFPs)
HP BladeSystem
InfiniBand Interconnects
Short Wave
HP 8Gb Shortwave B-series Fibre Channel 1 Pack SFP+ Transceiver
HP B-series 16Gb SFP+ Short Wave Transceiver
Long Wave
HP 8Gb Long Wave B-series 10km Fibre Channel 1 Pack SFP+ Transceiver
HP B-series 16Gb SFP+ Long Wave 10km Transceiver
Extended Long Wave
HP B-series 8Gb Extended Long Wave 25km Fibre Channel SFP+ Transceiver 1 Pack
HP 4X QDR QLogic InfiniBand Switch Module for c-Class BladeSystem
QLogic InfiniBand 4X QDR Management Module for c-Class BladeSystem
HP 4X QDR InfiniBand Switch Module for c-Class BladeSystem
HP 4X FDR InfiniBand Managed Switch Module for c-Class BladeSystem
HP 4X FDR InfiniBand Switch Module for c-Class BladeSystem
NOTE: Please see the InfiniBand QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html
(Worldwide)
466482-B21
572018-B21
403626-B21
AJ820B
AJ821B
AJ822B
AW563A
AW564A
T5169A
C8S46A
C8S45A
C8S47A
T5517A
AJ716B
QK724A
AJ717A
QK725A
AW538A
505958-B21
505959-B21
489184-B21
648311-B21
648312-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 18
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
Step 6: Select rack power distribution unit (PDU)
NOTE: A pair of PDUs must be ordered for AC feed redundancy.
NOTE: Additional HP Power Distribution Units are available than those listed below. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower .
HP Power Distribution
Units (PDU)
HP Monitored Power Distribution Unit: Full Rack Version
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit
HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution Unit
HP Monitored Power Distribution Unit: Half Rack Version
HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution Unit
HP 17.3kVA 48A Single Input Three Phase NA/JP Monitored Power Distribution Unit
NOTE: Please see the Monitored Power PDU QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12118_na/12118_na.html
HP Modular Power Distribution Units
HP 17.3kVA 48A Three Phase NA/JP Modular Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit
HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html
AF504A
AF506A
AF914A
AF916A
AF511A
AF519A
AF512A
252663-D75
252663-D74
HP Intelligent Power
Distribution Units (iPDU) iPDU Core Units
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution
Unit
NOTE: Please see the iPDU QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.html
AF520A
AF522A
AF523A
AF900A
AF902A
AF901A
AF533A
AF533A
AF537A
Step 7: Select optional Power Cords
DA - 12810 North America — Version 52 — December 10, 2013 Page 19
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
HP Intelligent Power
Distribution Units Power cords
(HP C19 to C20)
HP Power Distribution
Units Power cords
(HP C19 to C20)
Additional HP Power
Cords
NOTE: Order with HP Single Phase FIO Intelligent Power Module for c-Class
BladeSystem (P/N 677595-B21).
HP 2.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HP 2.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HP 2.5m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HP 2.5m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HP 3.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HP 3.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HP 1.37m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
HP 1.37m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord
HP C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord
HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord
HP C19 - C20 WW 250V 16Amp 4.5m Jumper Cord
HP LV Power Cords 100 - 120V AC
HP C19 - Nema 5-20P US/CA 125V 20Amp 4.5m Power Cord
HP C19 - Nema 5-15 US/CA 125V 15Amp 3.6m Power Cord
HP HV Power Cords 200 - 240V AC
HP C19 -Nema L6-30P US/CA 250V 16Amp 4.5m Power Cord
HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord
HP C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord
HP C19 - BS-1363/A UK/HK/SG 250V 13Amp 3.6m Power Cord
HP C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord
HP C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord
HP C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord
HP C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord
HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord
HP C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord
HP C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord
HP C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord
HP C19 - CNS-690 TW 250V 16Amp 2.5m Power Cord
HP 240 VAC 4.5M Unterminated End NA Power Cord
NOTE: For additional power cable information, please visit: http://h18000.www1.hp.com/products/servers/proliantstorage/powerprotection/options/power-cable.html
TK738A
TK739A
TK740A
TK741A
TK742A
TK743A
TK744A
TK745A
AF575A
AF574A
295633-B22
E7804A
E7802A
235603-001
E7805A
AF593A
AF592A
359615-031
AF576A
AF577A
AF579A
AF580A
AF581A
AF582A
AF583A
AF584A
AF585A
E7806A
DA - 12810 North America — Version 52 — December 10, 2013 Page 20
QuickSpecs
Related Options
HP Enclosure Options
HP Power Supplies
HP BladeSystem c7000 Enclosure
HP BLc7000 Onboard Administrator with KVM Option
NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM. The HP c7000 OA with KVM must be the active OA to provide the enclosure KVM feature. The
KVM menu has an OA CLI button at the bottom, which allows an OA administrator to log into the OA and be able to force a takeover so the OA with KVM will become the standby
OA. The OA Firmware Sync feature cannot be used to update mismatched OA modules.
Mismatched OA firmware versions between the original c7000 OA and c7000 OA with
KVM require the administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp, local client file using the GUI or USB key containing the OA firmware file).
NOTE: Models of the c7000 enclosure (PN 681840-B21, 681842-B21, and 681844-B21) come with a BladeSystem Onboard Administrator with KVM as standard. Order (P/N
456204-B21) when a second redundant BladeSystem Onboard Administrator is desired for a c7000 enclosure.
NOTE: HP ProLiant Gen8 server blades and certain options require the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
.
HP BLc7000 10000 Series Rack Shipping Bracket Option
NOTE: The shipping bracket is required when shipping a c7000 enclosure when installed in a rack. It is not required for normal operation.
HP BLc7000 Miscellaneous Blanks Option Kit
NOTE: Contains 1 each of c3000/c7000 Active Cool Fan blank, c3000/c7000 interconnect module blank, c7000 Onboard Administrator blank, c3000 local KVM blank, c3000 power supply blank, c7000 power supply blank, c3000 DVD blank, and a c3000 mini-divider.
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP BLc7000 Server Blank w/Coupler Option
NOTE: This is option contains one half-height device blank and a coupler that can be used for the c3000 and c7000 enclosures.
NOTE: Order quantity of one 412150-B21 for filling a half-height bay; the coupler is not used.
NOTE: Order quantity of two 412150-B21 for filling a full-height bay. One coupler is installed between the two half-height blanks to be connected together to create a fullheight blank.
NOTE: This kit should only be ordered to replace lost or damaged blanks.
NOTE: Mixing of Power Supplies Is Not Supported on BladeSystem c7000 Enclosures, except during hot swaps to different level power supplies. OA will exhibit a mismatch error due to mixed power supplies until all power supplies are matched.
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply Option Kits are needed. For full redundancy 6 Power Supply Option Kits are required.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publically posts the results on 80Plus.org."
456204-B21
433718-B21
412148-B21
412150-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 21
QuickSpecs
Related Options
HP Cooling Options
HP BladeSystem c-Class Network
Interconnects
HP BladeSystem c7000 Enclosure
HP 2650W Platinum Hot Plug Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2650W, 94%: Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80
Plus Platinum.
HP 2400W Platinum Hot Plug Power Supply Kit
NOTE: This option enables HP Power Discovery Services.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2400W, 94%: Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80
Plus Platinum.
HP 2400W Gold Hot Plug Power Supply Kit
NOTE: Supplied with 2m/6ft IEC C20 - C19 jumper cord.
NOTE: This option disables HP Power Discovery Services.
NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency Initiatives:
2400W, 92%: Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80
Plus Platinum.
HP 2250W -48VDC Hot Plug Power Supply Kit
NOTE: This option disables HP Power Discovery Services.
NOTE: Only compatible with -48V DC Power Input Module.
HP c-Class Active Cool Fan
HP BLc7000 Enclosure HP Single Active Cool Fan Option Kit
NOTE: A minimum 4 Active Cool 200 Fans is required, 8 Active Cool 200 Fans can support a full blade enclosure, 10 Active Cool 200 Fans should be ordered for reduced power consumption and noise reduction. Some blade configurations require 10 fans.
HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
HP Virtual Connect Flex-10 Ethernet Module Enterprise Edition for BLc7000 Option
NOTE: Includes 2 x HP Virtual Connect Flex-10 10Gb Ethernet modules plus 1 x VCEM
BL-c7000 enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate must be redeemed online or via fax to obtain the VCEM license activation key
NOTE: For additional license kits, please visit: http://h18000.www1.hp.com/products/quickspecs/12860_na/12860_na.html
HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
NOTE: Includes 2 x HP Virtual Connect FlexFabric 10Gb/24-port modules plus 1 x VCEM
BL-c7000 enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate must be redeemed online or via fax to obtain the VCEM license activation key.
HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HP 6125G Ethernet Blade Switch
HP 6125G/XG Ethernet Blade Switch
HP 6120G/XG Ethernet Blade Switch
HP 6120XG Blade Switch
HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
733459-B21
588603-B21
499243-B21
AH332A
412140-B21
455880-B21
591973-B21
605865-B21
571956-B21
658247-B21
658250-B21
498358-B21
516733-B21
406740-B21
538113-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 22
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Mellanox SX1018HP Ethernet Switch for c-Class BladeSystem
Cisco Catalyst 1/10GbE 3120X Blade Switch
Cisco Catalyst 1GbE 3120G Blade Switch
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
HP GbE2c Layer 2/3 Ethernet Blade Switch
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. The above interconnects must be ordered in quantities of two for redundancy support.
HP BladeSystem c-Class SAN Interconnects
HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem
HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem
HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for BladeSystem c-Class
Brocade 8/24c SAN Switch for BladeSystem c-Class
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9124e Switch for BladeSystem c-Class 12-port Upgrade LTU
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
Brocade 4/12 SAN Switch Upgrade RTU for HP BladeSystem c-Class
HP MDS 8/12c Fabric Switch 12-port Upgrade LTU
NOTE: Licensed per switch.
HP SAS Switch
HP BladeSystem
InfiniBand Interconnects
HP MDS Fabric Manager Server for BladeSystem c-Class LTU
NOTE: Licensed per switch.
HP MDS Enterprise Package for BladeSystem c-Class LTU
NOTE: Licensed per switch.
HP MDS Fabric Manager Server Enterprise Package for BladeSystem c-Class LTU
NOTE: Licensed per switch.
HP 6Gb SAS Switch Single Pack for HP BladeSystem c-Class
HP 6Gb SAS Switch Dual Pack for HP BladeSystem c-Class
NOTE: Please see the 6GB SAS Switch QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/13960_na/13960_na.html
HP 4X QDR QLogic InfiniBand Switch Module for c-Class BladeSystem
QLogic InfiniBand 4X QDR Management Module for c-Class BladeSystem
HP 4X QDR InfiniBand Switch Module for c-Class BladeSystem
NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in the RoHS
6 of 6 compliant enclosures and G6 Blades.
HP 4X FDR InfiniBand Managed Switch Module for c-Class BladeSystem
HP 4X FDR InfiniBand Switch Module for c-Class BladeSystem
689638-B21
451439-B21
451438-B21
410916-B21
641146-B2
657787-B21
438030-B21
466482-B21
572018-B21
403626-B21
AJ820B
AJ821B
AJ822B
AW563A
AW564A
T5169A
C8S46A
C8S45A
C8S47A
AE373A
TA804A
TC316A
TC317A
TC318A
BK763A
BK764A
505958-B21
505959-B21
489184-B21
648311-B21
648312-B21
DA - 12810 North America — Version 52 — December 10, 2013 Page 23
QuickSpecs
Related Options
NOTE: Please see the InfiniBand QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html
HP Integrity USB External DVD/RW Drive
HP Optical Drives
HP BladeSystem c7000 Enclosure
AT120A
HP Insight Software Insight Control
HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 8 Svr FIO
Electronic License
HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 16Svr FIO
Electronic License
HP Insight Control Server Provisioning Media Kit
NOTE: HP Insight Control 7.2 introduces Insight Control server provisioning, a new capability ideal for multi-server OS and firmware provisioning to ProLiant and
BladeSystem servers. Insight Control server provisioning is included and licensed as part of HP Insight Control. A media kit, "HP Insight Control server provisioning USB media kit" (# BD883A), including a USB, is available for customers who require a physical copy of the media loaded with Insight Control server provisioning software.
Please note that this media kit is separate and in addition to the "HP Insight
Management DVD media kit" (#C6N31A).
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The Insight Management Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .
NOTE: The "for bundling with an enclosure" license kits can only be ordered together with a BladeSystem c3000 or c7000 enclosure on the same order.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
C6N32ABE
C6N33ABE
BD883A
C6N31A
DA - 12810 North America — Version 52 — December 10, 2013 Page 24
QuickSpecs
Related Options
HP iLO Advanced for
BladeSystem License
HP BladeSystem c7000 Enclosure
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server License 512489-B21
HP Virtual Connect
Enterprise Manager
HP Virtual Connect Enterprise Manager including 1yr 24x7 Support Single c7000
Enclosure Lic
NOTE: This license allows 1 BL-c7000 enclosure to be managed with VCEM. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and
Update Service.
NOTE: For additional license kits, please visit: http://h18000.www1.hp.com/products/quickspecs/12860_na/12860_na.html
459864-B21
HP c-Class Storage Blades HP D2200sb PCIe Storage Blade
NOTE: Please see the HP D2200sb Storage Blade QuickSpecs for technical specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/13714_na/13714_na.html
HP D2220sb PCIe and StoreVirtual VSA Bundle
NOTE: Includes the D2220sb Storage Blade and a single HP StoreVirtual VSA license.
VSA software is installed in a virtual machine on a VMware ESX/ESXi & Microsoft Hyper-
V host server adjacent to the D2220sb.
NOTE: Includes 3yr NBD Parts-Only Warranty Service for D2220sb hardware.
NOTE: Includes 3yr 9x5 remote technical support for HP StoreVirtual VSA software and free updates.
NOTE: HP StoreVirtual VSA is supported on VMware ESX/ESXi & Microsoft Hyper-V.
HP D2220sb PCIe w/(12) 900 GB 6G SAS HDD Bundle
NOTE: Includes 3yr NBD Parts-Only Warranty Service for D2220sb hardware
HP D2220sb Build-to-order Storage Blade
NOTE: Includes 3yr NBD Parts-Only Warranty Service
HP D2220sb Configure-to-order Storage Blade
NOTE: Includes 3yr NBD Parts-Only Warranty Service
NOTE: The D2220sb requires a c7000 Enclosure configuration with 10 fans.
NOTE: Please see the HP D2220sb Storage Blade QuickSpecs for technical specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/14507_na/14507_na.html
.
HP BL c-Class PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support an expansion blade with the ProLiant BL620c G7 Server Blade. Up to two expansion blades are supported per server mix and match (Ultrium Tape,
D2220sb/D2220sb PCIe Storage, and/or PCI Expansion Blades). See the "Expansion blade" section later in this document for more information.
HP StoreEasy 3830 Gateway Storage Blade
AP880A
QW914A
QW915A
QW917A
QW918A
431643-B21
B7E01A
DA - 12810 North America — Version 52 — December 10, 2013 Page 25
QuickSpecs
Related Options
HP Expansion Blades
HP BladeSystem c7000 Enclosure
HP BLc PCI Expansion Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
HP BL c-Class PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support an expansion blade with the ProLiant BL620c G7 Server Blade. Up to two expansion blades are supported per server mix and match (Ultrium Tape,
D2220sb/D2220sb PCIe Storage, and/or PCI Expansion Blades). See the "Expansion blade" section later in this document for more information.
448018-B21
431643-B21
BS580B
AQ697B
HP Ultrium Tape Blades
HP StoreEver LTO-5 Ultrium SB3000c Tape Blade
HP StoreEver LTO-4 Ultrium SB1760c Tape Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
HP BL c-Class PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support an expansion blade with the ProLiant BL620c G7 Server Blade. Up to two expansion blades are supported per server mix and match (Ultrium Tape,
D2220sb/D2220sb PCIe Storage, and/or PCI Expansion Blades). See the "Expansion blade" section later in this document for more information.
HP Power Cords HP LV Power Cords 100 - 120V AC
HP C19 - Nema 5-20P US/CA 125V 20Amp 4.5m Power Cord
HP C19 - Nema 5-15 US/CA 125V 15Amp 3.6m Power Cord
HP C19 - C20 Jumper Cords
HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord
HP C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord
HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord
HP C19 - C20 WW 250V 16Amp 4.5m Jumper Cord
HP HV Power Cords 200 - 240V AC
HP C19 -Nema L6-30P US/CA 250V 16Amp 4.5m Power Cord
HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord
HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord
HP 240 VAC 4.5M Unterminated End Power Cord
NOTE: For additional power cable information, please visit: http://h18000.www1.hp.com/products/servers/proliantstorage/powerprotection/options/power-cable.html
431643-B21
E7802A
235603-001
AF575A
AF574A
295633-B22
E7804A
E7805A
AF593A
AF581A
E7806A
DA - 12810 North America — Version 52 — December 10, 2013 Page 26
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
HP Uninterruptible Power
Systems
NOTE: A pair of PDUs must be ordered for AC feed redundancy.
NOTE: Additional HP Power Distribution Units are available than those listed below. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower .
HP Rack-mountable UPS
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14059_na/14059_na.html
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14058_na/14058_na.html
R5000 Uninterruptible Power System (UPS)
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/14109_na/14109_na.html
R7000 Uninterruptible Power System (UPS)
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/14110_na/14110_na.html
HP R5KVA and R7KVA 3U Extended Runtime Module
HP Rack-mountable R8000/R12000 UPS
HP R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power System
HP R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/12857_na/12857_na.html
AF470A
AF466A
AF467A
AF460A
AF462A
AF464A
AF431A
AF429A
DA - 12810 North America — Version 52 — December 10, 2013 Page 27
QuickSpecs
Related Options
HP Basic Power
Distribution Units
HP BladeSystem c7000 Enclosure
NOTE: A pair of PDUs must be ordered for AC feed redundancy.
NOTE: Additional HP Power Distribution Units are available than those listed below. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower .
HP 1.9kVA 120 Volt 12 Outlet NA/JP Basic Power Distribution Unit
HP 2.8kVA 120 Volt 18 Outlet NA/JP Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 12 Outlet WW Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 20 Outlet WW Basic Power Distribution Unit
HP 4.9kVA 208 Volt 20 Outlet NA/JP Basic Power Distribution Unit
HP 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit
HP 8.3kVA 208 Volt 36 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 18 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Basic Power Distribution Unit
HP 5.7kVA 208 Volt Three Phase 27 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 11kVA 400 Volt Three Phase 42 Outlet NA Basic Power Distribution Unit
HP Hardwired 200-240 Volt 36 Outlet WW Basic Power Distribution Unit
HP 13.2kVA 480 Volt Three Phase 15 Outlet NA Basic Power Distribution Unit
HP 19.9kVA 480 Volt Three Phase 30 Outlet NA Basic Power Distribution Unit
HP 277 Volt options for H3X07A and H3X08A
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14557_na/14557_na.html
H5M64A
H5M67A
H5M75A
H3X07A
H3X08A
H3X09A
H5M54A
H5M55A
H5M56A
H5M57A
H5M58A
H5M59A
H5M60A
H5M61A
H5M62A
H5M63A
HP Rack Series HP Intelligent Series Rack
HP 642 1075mm Pallet Intelligent Series Rack
HP 642 1075mm Shock Intelligent Series Rack
NOTE: HP BladeSystem c7000 Enclosure is not supported in a 14U rack
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14223_na/14223_na.html
NOTE: For additional information regarding rack cabinets, please see the following URL: http://www.hp.com/go/rackandpower
BW903A
BW904A
DA - 12810 North America — Version 52 — December 10, 2013 Page 28
QuickSpecs
Related Options
HP Tape Backup
HP BladeSystem c7000 Enclosure
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK .
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit
HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive
C0L99A
EH963A
EH964A
EH969A
EH970A
HP Rack Options Keyboards and Monitors
HP USB BFR with PVC Free Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13972_na/13972_na.html
HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard TAA Monitor
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower
HP KVM Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM CAT5 1-pack USB Interface Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
631341-B21
AZ870A
AZ885A
AF616A
AF617A
AF626A
AF618A
AF619A
336047-B21
AF611A
AF620A
AF621A
AF622A
DA - 12810 North America — Version 52 — December 10, 2013 Page 29
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles Switches.
Cat52 cables can be found at the following URL: http://www.hp.com/go/kvm
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm
HP Airflow Optimization
HP Rack Airflow Optimization Kit
NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from mixing thus optimizing the temperature at which the chilled air enters the racked servers.
NOTE: When configuring racks through Factory Express, a Rack Optimization kit will automatically ship with the rack. This kit is recommended for all other rack configurations also.
NOTE: For additional information regarding Rack Options, please see the following URL: www.racksolutions.com/hp .
AF090A
HP Care Pack Services
NOTE: Some options, including Fibre Channel and InfiniBand switches for the HP c-Class
BladeSystem, are not covered under the c7000 enclosure Care Packs and carry separate
Care Packs. Care Pack service level support for these options should always be uplifted to match existing storage or server service level.
Please view the option QuickSpecs or contact your HP sales representative or HP authorized ServiceOne partner for Care Pack information.
Proactive Care Services
HP 3 year 4 hour 24x7 c7000 Enclosure Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 c7000 Enclosure Proactive Care Service
HP 3 year 4 hour 24x7 c7000 Enclosure with Insight Control Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 c7000 Enclosure with Insight Control Proactive
Care Service
HP Proactive Care Personalized Support - Environmental Option
HP 3 year ISS ProactiveCare Personalized Support
Installation & Start-up Services
HP Startup BladeSystem c7000 Infrastructure Service
HP Enhanced Network Installation and Startup Service for HP BladeSystem
HP Hardware Install c-Class Enclosure and Server Blade Service
HP Installation during Non Standard Hours c7000 Enclosure & Blade Service
NOTE: Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
HP Flexible Care Pack Services for your Integrity BladeSystem Enclosure
NOTE: Some options, including Fibre Channel and InfiniBand switches for the HP c-Class
BladeSystem, are not covered under the c7000 Platinum enclosure Care Packs and carry separate Care Packs. Care Pack service level support for these options should always be uplifted to match existing storage or server service level.
U3C33E
U3C36E
U3P10E
U3P13E
U6W98E
UE602E
UE603E
UE494E
UG870E
DA - 12810 North America — Version 52 — December 10, 2013 Page 30
QuickSpecs
Related Options
HP BladeSystem c7000 Enclosure
Please view the option QuickSpecs or contact your HP sales representative or HP authorized ServiceOne partner for Care Pack information.
Mission Critical Services
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite HW support
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair onsite HW support
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software
HP Enhanced Network Installation and Startup Service for HP BladeSystem
NOTE: Please contact your HP sales representative or HP authorized ServiceONE partner for additional flexible Care Pack information
HA111A3#6Q6
HA112A3#6Q6
HA114A1#57A
HA124A1#56H
DA - 12810 North America — Version 52 — December 10, 2013 Page 31
QuickSpecs
Power Specifications
HP 2400 Watts Platinum Hot Plug Power Supply
Part Number
588603-B21
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz)
200-240
50 / 60
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
Nominal Input Current (A rms)
Maximum Rated Input Wattage Rating
(Watts)
Maximum Rated VA (Volt-Amp)
Efficiency (%) at Max. Rated Output
Wattage
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration (mS)
Maximum British Thermal Unit Rating
(BTU-Hr)
200
2450
13.9
2692
2778
91
0.98
0.97
100
10
9186
HP 2650 Watts Platinum Hot Plug Power Supply
Part Number
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz)
733459-B21
200-240
50 / 60
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
Nominal Input Current (A rms)
Maximum Rated Input Wattage Rating
(Watts)
Maximum Rated VA (Volt-Amp)
Efficiency (%) at Max. Rated Output
Wattage
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration (mS)
Maximum British Thermal Unit Rating
(BTU-Hr)
200
2650
14.5
2898
2896
91.4
0.97
9888
208
2450
13.4
2692
2778
91
0.98
1.01
100
10
9186
208
2650
13.9
2901
2888
91.3
1.01
9899
HP BladeSystem c7000 Enclosure
220
2450
12.6
2678
2762
91.5
0.98
1.06
100
10
9136
230
2450
12.0
2678
2762
91.5
0.98
1.11
100
10
9136
240
2450
11.4
2663
2747
92
0.98
1.16
100
10
9086
220
2650
13.1
2904
2887
91.2
0.98
1.06
100
10
9910
230
2650
12.5
2887
2882
91.8
1.11
9850
240
2650
12.0
2884
2878
91.9
1.16
9840
DA - 12810 North America — Version 52 — December 10, 2013 Page 32
QuickSpecs
HP BladeSystem c7000 Enclosure
Power Specifications
NOTE:
To review maximum system power ratings for facilities planning purposes use the HP Power Advisor which is available via the online tool located at URL: www.hp.com/go/HPPowerAdvisor
DA - 12810 North America — Version 52 — December 10, 2013 Page 33
QuickSpecs
Server Blade, Expansion Blade, and Fan Population Guidelines
Server Blade and Fan Population Guidelines
Fan bay numbering
HP BladeSystem c7000 Enclosure
Fans must be placed in the following bays
Number of Fans Fan Bays Used
4
6
8
10
4, 5, 9, 10
3, 4, 5, 8, 9, 10
1, 2, 4, 5, 6, 7, 9, 10
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
NOTE: For correct operation fans and server blades must be installed in the correct bays. The Onboard Administrator will ensure that fans and blades are correctly placed before allowing systems to power on.
DA - 12810 North America — Version 52 — December 10, 2013 Page 34
QuickSpecs
Server Blade, Expansion Blade, and Fan Population Guidelines
Half-height server blade bay numbering
HP BladeSystem c7000 Enclosure
1. Device Bay 1
2. Device Bay 2
3. Device Bay 3
4. Device Bay 4
5. Device Bay 5
6. Device Bay 6
7. Device Bay 7
8. Device Bay 8
9. Device Bay 9
10. Device Bay 10
11. Device Bay 11
12. Device Bay 12
13. Device Bay 13
14. Device Bay 14
15. Device Bay 15
16. Device Bay 16
NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So the first two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10 and so on until the enclosure is full.
Full-height server blade bay numbering
1. Device Bay 1
2. Device Bay 2
3. Device Bay 3
5. Device Bay 5
6. Device Bay 6
7. Device Bay 7
DA - 12810 North America — Version 52 — December 10, 2013 Page 35
QuickSpecs
Server Blade, Expansion Blade, and Fan Population Guidelines
4. Device Bay 4
NOTE: Full-height servers should be populated from left to right.
8. Device Bay 8
HP BladeSystem c7000 Enclosure
Full-height and half-height server blade mixed configurations
The c7000 enclosure is divided into 4 zones by the vertical support metalwork. Within each zone a removable divider is used to support half height devices. To install a full-height blade in any zone this divider must be removed. As a consequence a zone can only contain either full-height server blades or half-height server blades.
NOTE: Expansion blades can be installed in the same zone as both full-height and half-height blades. For more information, please see the "Expansion blades" later in this document.
Expansion blades
Expansion blades consist of storage blades, tape blades, and the PCI Expansion Blade. Up to 8 expansion blades are supported per HP
BladeSystem c-Class c7000 Enclosure. Expansion blades may be installed in the same zone as half-height and full-height server blades. An expansion blade is installed directly adjacent to a server blade, also known as a partner server blade. An overview of the expansion blade population rule best practices are summarized below. For detailed expansion blade rules and guidelines, please see the documentation that ships with the enclosure and expansion blade.
DA - 12810 North America — Version 52 — December 10, 2013 Page 36
QuickSpecs
Server Blade, Expansion Blade, and Fan Population Guidelines
HP BladeSystem c7000 Enclosure
Figure 1
Installing an expansion blade adjacent to a halfheight server blade.
Figure 2
Expansion blade population best practices for half-height server blades
Installing a single expansion blade adjacent to a full-height server blade.
1.
2.
3.
4.
5.
One half-height partner server blade supports one expansion blade (Figure 1).
Identify the partner server blade to be installed with the expansion blade. The two blades always occupy a pair of slots as follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 & 12, 13 & 14, 15 & 16.
If the partner server blade is installed in an odd-numbered bay, the expansion blade is installed in the adjacent even-numbered bay to the right.
If the partner server blade is installed in an even-numbered bay, the expansion blade is installed in the adjacent odd-numbered bay to the left.
Each c7000 zone contains a removable divider that is used to support half-height devices. This divider is remains installed whether the half-height devices are server or expansion blades.
Expansion blade population best practices for full-height server blades:
1.
2.
3.
4.
5.
One full-height partner server blade supports one or two expansion blades. Figure 2 shows installation of one expansion blade.
Identify the partner server blade to be installed with the first expansion blade. The two blades always occupy a pair of slots, as follows: 9 & 10, 11 & 12, 13 & 14, 15 & 16.
The partner server blade is installed in an odd-numbered bay. The first expansion blade is installed on the lower row of the enclosure in an even-numbered bay (slots 10, 12, 14 or 16) adjacent to the partner server blade.
If only a single expansion blade is installed: a.
A half-height server blade may be installed in the empty bay directly above the expansion blade; this server blade cannot be partnered with the expansion blade. A coupler bracket is installed on the expansion blade. A coupler bracket is not installed on the server blade. A coupler bracket is included with each expansion blade.
b.
c.
If no device is desired in the empty bay above the expansion blade, a device bay blank is installed.
The upper half-height server blade or device bay blank must be removed before removing the lower expansion blade.
If a second expansion blade is installed: a.
It is always located directly above the first installed expansion blade. A coupler bracket is installed on the lower expansion blade. A coupler bracket is not installed on the upper expansion blade. A coupler bracket is included with each expansion b.
DA - 12810 North America — Version 52 — December 10, 2013 Page 37
QuickSpecs
5.
HP BladeSystem c7000 Enclosure
6.
7.
b.
blade.
Two storage blades, two tape blades, two PCI Expansion Blades, or a mixture of any two. For a mixed configuration that contains a storage blade, the storage blade is installed on the bottom bay and the tape blade or PCI Expansion Blade is installed on the top bay.
c.
The upper expansion blade must be removed before removing the lower expansion blade.
When partnering an expansion blade with a ProLiant BL620c G7 Server Blade, an HP PCI Express Mezzanine Pass-Thru Card for
BladeSystem c-Class (431643-B21) is required. This card is installed in the mezzanine 3 connector in the server blade for a lower bay expansion blade installation and a second card in installed in mezzanine 2 connector if a second expansion blade is required.
The HP ProLiant BL680c G7 Server Blade is a full-height, double-wide device. It does not support expansion blades.
DA - 12810 North America — Version 52 — December 10, 2013 Page 38
QuickSpecs
Technical Specifications
HP BladeSystem c7000 Server Blade
Enclosure
HP BladeSystem c7000 Enclosure
Dimensions
Shipping Dimensions
Height
Width
Depth
Height
Width
Depth
Unboxed
17.4 in (442 mm)
17.6 in (447.04 mm)
32 in (813 mm)
29.88 in (759 mm)
23.88 in (607 mm)
39.88 in (1013 mm)
192 lb (87 kg)
Single Phase Enclosure
Weight
Three -Phase Enclosure
Weight
DC Input Enclosure
Weight
Max Enclosure Weight
(approximate)
Shipping
Unboxed
Shipping
Unboxed
Shipping
Unboxed
Shipping
Operating
235 lb (106.6 kg)
222 lb (100.7 kg)
265 lb (120.2 kg)
151 lb (68.5 kg)
194 lb (88 kg)
450 lb (204 kg)
493 lb (223.6 kg)
50° to 95° F (10° to 35° C)
Temperature Range
Relative Humidity
Non-Operating
Operating
-22° to 140° F (-30° to 60° C)
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, noncondensing.
Non-Operating 5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature, noncondensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is
30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Power Input Requirements -
Single Phase Model
Input Requirements -
Rated input frequency
2400W PSU
Rated input Frequency
2650W PSU
Rated input voltage
50 to 60 Hz
Rated input voltage
Rated input current per power supply
200 to 240 VAC
13.9 A at 200 VAC
13.3 A at 208 VAC
12.6 A at 220 VAC
2780 VA Rated input power per power supply
50 to 60 Hz
Rated input voltage
Rated input current per power supply
200 to 240 VAC
14.4 A at 200 VAC
13.8 A at 208 VAC
13.1 A at 220 VAC
Rated input power per power supply
200 to 208 VAC Line to Line
2880 VA
DA - 12810 North America — Version 52 — December 10, 2013 Page 39
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
Three Phase NA/JPN
Model
Input Requirements -
Three Phase International
Model
Input Requirements DC
Power
Power Cords
Rated input frequency
2250W PSU
2400W PSU
Rated input voltage
Rated input frequency
2250W PSU
2400W PSU
Rated Input Voltage
Max Input Current per line cord
Max Input Power per line
Cord
Single Phase
3-Phase
-48V DC Power
3-Phase Delta
50 to 60 Hz
Max input current per line cord
Max input power per line cord
22.6A at 200 VAC
21.8A at 208 VAC
7836VA Max
Max input current per line cord
Max input power per line cord
24A at 200 VAC
23.1A at 208 VAC
8340 VA Max
346 VAC to 415 VAC Line to Line
200 VAC to 240 VAC Line to Neutral
3-Phase WYE
50 to 60 Hz
11.9 A at 220 VAC
10.9 A at 240VAC
7836 VA Max
Max input current per line cord
Max input power per line cord
Max input current per line cord
Max input power per line cord
36 to -72 VDC
75A
12.6 A at 220 VAC
11.5 A at 240VAC
8340 VA Max
2700W
IEC-320 C19-C20 1.22m (6 ft)
2 x NEMA L15-30p 3.048m (10 ft)
Terminal lug: 45DG 4AWG 1/4 2H
Output
Specifications
(per power supply)
Acoustic Noise
Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
200 - 240 VAC 2400 W 92% Efficiency HP 2400W High Efficiency
Hot-Plug Power Supply
HP 2250W -48V DC Hot-
Plug Power Supply
2250W
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd 7.1 Bels
DA - 12810 North America — Version 52 — December 10, 2013 Page 40
QuickSpecs
Technical Specifications
Option Kits
LpAm
Operating
LWAd
LpAm
Power Supply Option
Shipping Dimensions
Fan Option Shipping
Dimensions
BladeSystem Onboard
Administrator Option
Shipping Dimensions
Height
Width
Depth
Weight
Height
Width
Depth
Weight
Height
Width
Depth
Weight
HP BladeSystem c7000 Enclosure
54 dBA
7.2 Bels
54 dBA
8.75 in (223 mm)
8.63 in (219 mm)
35.13 in (892 mm)
8.5 lbs (3.85 kg)
8.75 in (223 mm)
9.75 in (248 mm)
15.88 in (403 mm)
4.0 lbs (1.8 kg)
2.50 in (63.5 mm)
9.88 in (251 mm)
13.50 in (343 mm)
4.0 lbs (1.8 kg)
Environmental-friendly
Products and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
AMD Opteron™ is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 12810 North America — Version 52 — December 10, 2013 Page 41
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project