SPC-0347 LC-2

Material Safety Data Sheets
1.
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 1 of 8
Product and Company Identification
Product Name
: SS ink Light Cyan
Product Code
: SPC-0347LC-2
General Use
: Ink for ink jet plotter
Product Description
: Solvent pigment ink
MSDS Number
:031-34S013C
Manufacture
Company Name
: Mimaki Engineering Co., Ltd
Address
: 2182-3 Otsu, Shigeno, Tomi-shi, Nagano 389-0512 Japan
Telephone No.
: +81-268-64-2413
Importer/Distributor Established in USA
Company Name
: MIMAKI USA. INC.
Address
: 150 Satellite Boulevard, suite A, Suwanee, Georgia 30024, U.S.A
Telephone No.
: 1-678-730-0100
Emergency Telephone No.
2.
: +81-268-64-2413
Hazards Identification
Emergency Overview
: Combustible liquid. Acute toxic substance.
Stagnant vapor may cause fire.
May cause organic solvent poisoning.
Do not inhale. Inhalation may cause any of the following symptoms:
dizziness, headache, the stimulation of eyes, skin and respiratory
tract.
Potential Health Effects
Inhalation
Harmful by inhalation. Irritating to respiratory system.
Eye Contact
: Irritating to eyes.
Skin Contact
: Harmful in contact with skin. Irritating to skin.
Ingestion
: Harmful: may cause lung damage if swallowed.
Carcinogens
: No ingredients are listed by OSHA, IARC, or NTP as known or
suspected carcinogens.
Potential Environmental
Effects
Medical conditions
: Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
: No medical conditions are known to be aggravated by exposure to SS
ink.
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 2 of 8
Material Safety Data Sheets
3.
Composition / Information On Ingredients
Chemical
No
Chemical Name
Wt%
CAS No.
1
Cyclohexanone
1.0~4.9
108-94-1
C6H10O
2
2-butoxyethyl acetate
75.0~85.0
112-07-2
C8H16O3
3
2-methoxy-1-methylethyl acetate
10.0~20.0
108-65-6
C6H1203
4
Phthalocyanine blue
0.1~1.0
147-14-8
C32H16CuN8
5
Vinylchloride-Vinylacetate Copolymer
1.0~5.0
9003-22-9
OSHA Hazardous
Formula
-(CH2CHCl)n-(CH
2CHOCOCH3)m-
: Components 1, 2 and 4 are hazardous components.
Components
(29 CFR 1910. 1200)
4.
First Aid Measures
Inhalation
: If inhaled, immediately remove to fresh air and keep warm and calm.
If breathing irregularly or not breathing, give artificial respiration.
Keep from swallowing vomit.
Consult a doctor immediately.
If inhaled and feeling sick, remove to fresh air, keep warm and calm
and consult a doctor.
Eye Contact
: Flush eyes with plenty of water for at least 15 minutes.
Consult a doctor immediately.
Skin Contact
: Immediately remove from skin with cloth.
Flush thoroughly with plenty of water and soap or skin detergent.
Do not use solvent or thinner.
Consult a doctor in case of change of appearance or ache
Ingestion
: If swallowed, keep calm and consult a doctor immediately.
Keep from swallowing vomit.
Protection To First-Aiders
: Wear a tool for appropriate protection. Ventilate.
Note To Physician
: Treatment may vary with condition of victim and specifics of
incident.
Material Safety Data Sheets
5.
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 3 of 8
Fire Fighting Measures
Flammable Properties
: The harmful gas such as carbon monoxide or the low molecule
monomer occurs by combustion.
Flash point:
66.5 degree C
Ignition point:
340 degree C
Flammable point:
0.8% to 10.7%
Extinguishing Media
: CO2, foam, powder, dry sand.
Never splash water.
Fire Fighting
Instructions
6.
: Use proper protection (heat-resisting clothes, etc.).
Promptly remove flammables.
Accidental Release Measures
Personal Precautions
: Avoid contact with eyes. Do not rub eyes with hands during cleanup.
No special precautions for dermal contact are needed.
Wash hands thoroughly after cleaning up spill or leak.
Land Spill
: Use proper protection (gloves, masks, aprons, goggles, etc.)
If Collect spills in a sealing container and remove to safe place.
Dispose of waste according to legal instructions.
Promptly remove ignitable, hot, or flammable items.
Prepare proper fire extinguishers for accidental ignition.
Use plastic or other equipment to prevent sparks during recovery
operation. Use dry sand, dirt or other nonflammable absorber.
Water Spill
7.
: Avoid discharge to rivers and environmental effects.
Handling And Storage
Handling
: Use proper protection (gloves, masks, aprons, goggles, etc.)
Handle in well-ventilated area.
Prohibit use of fire, sparks or heat source.
Ground equipment against electrostatics and use explosion-proof
electric equipment.
Use spark-proof tools.
Keep used cloths, waste paints or spray dusts in water until disposal.
Use local exhaust system and proper protection if working in closed
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 4 of 8
Material Safety Data Sheets
area.
Storage
: Keep from sunlight.
Store in well-ventilated area.
Keep from open fire or heat source.
8.
Exposure Controls / Personal Protection
Exposure Limit Values
No
TWA
STEL
Ceiling
Skin
SEN
OSHA PEL
N.E.
N.E.
N.E.
N.E.
N.E.
ACGIH TLV
20ppm
50ppm.
N.E.
N.E.
N.E.
OSHA PEL
N.E.
N.E.
N.E.
N.E.
N.E.
ACGIH TLV
20ppm
N.E
N.E.
N.E.
N.E.
2-methoxy-1-methyl
OSHA PEL
N.E
N.E.
N.E.
N.E.
N.E.
ethyl acetate
ACGIH TLV
N.E
N.E.
N.E.
N.E.
N.E.
Chemical Name
1
Cyclohexanone
2
2-butoxyethyl acetat
3
Exposure Controls
Occupational Exposure Controls
Engineering Controls
: Use explosion-proof handling equipment.
Use exhaust system to prevent vapor build-up
Ground transporting, scooping, agitating or other liquid handling
equipment.
Keep heat or fire sources from handling area.
If working indoors, use automatic coating machine or other
proper equipment to protect workers from direct exposure or use
local exhaust system to protect workers from exposure.
Personal Protection
Respiratory Protection
: Wear gas masks for organic gases.
Wear ventilation masks when working in closed area.
An air purifying respirator with organic vapor cartridge or
canister may be permissible under certain circumstances where
air-borne concentrations are expected to exceed exposure limits.
Protection provided by air purifying respirators is limited.
Hand Protection
: Wear gloves that resist organic solvents and chemicals.
Material Safety Data Sheets
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 5 of 8
Eye Protection
: Wear coverall, chemical goggles and face shield when handling.
Skin Protection
: To prevent any contact, wear impervious clothing such as gloves,
apron, boots, or whole body suits made from neoprene, as
appropriate.
Environmental Exposure Controls
: Not available
9.
Physical And Chemical Properties
Appearance
- Physical state
: liquid
- Color
: Light Cyan
Odor
: Solvent odor
Ph
: Not applicable
Boiling Point / Boiling Range
: 146 degree C
Melting Point / Melting Range
: Not available
Flash Point
: 66.5 degree C
Auto-Ignition Temperature
: 340 degree C
Flammability(solid, gas)
: Not Applicable
Explosive Properties
: Flammable point: 0.8% to 10.7%
Vapor Pressure
: 500Pa(20 degree C)
Specific Gravity
: 0.953 (20 degree C)
Solubility
: Not available
Water solubility
: Not available
Partition Coefficient(n-octanol / water)
: Not available
Viscosity
: Not available
Vapor density
: Not available
Material Safety Data Sheets
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 6 of 8
: 922.7 g/l
VOC
10. Stability And Reactivity
Conditions To Avoid
: Excessive heat and cold. Sparks. Ignition sources. Direct sunlight.
High humidity.
Stability
: Stable
Materials To Avoid
: Strong acid. Strong bases.
Hazardous Reactions/
: Will not occur.
Decomposition Products
: To burn this product may be produce toxic gases such as CO and
low-molecular-weight monomers.
11. Toxicologocal Information
Acute Toxicity
: Oral
LD50(rat)
Cyclohexanone
1353mg/kg
2-butoxyethl acetate
3000mg/kg
2-methoxy-1-methylethl acetate
8532mg/kg
: Dermal
LD50(rabbit)
Cyclohexanone
950mg/kg
2-butoxyethl acetate
1500mg/kg
2-methoxy-1-methylethl acetate
>5000mg/kg
: Inhalation
LC50(rat)
Cyclohexanone
2-methoxy-1-methylethl acetate
Eye Irritation
LC50(rabbit)
8000ppm/4Hr
4345ppm
24700ppm
: 2-methoxy-1-methylethl acetate compound
Irritating to eyes.
Skin Irritation
: Not available
Sensitization
: Not available
Mutagenicity
: Not available
12. Ecological Information
Handling is noted because it might influence the environment when
leaking and abandoning it.
Especially, note that the product doesn’t flow directly to ground, the
Material Safety Data Sheets
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 7 of 8
river, and the drain ditch.
Ecotoxicity
: Not Available
Persistence And
: Not Available
Degradability
Bioaccumulative
: Not Available
Potential
Other Adverse Effects
: Not Available
13. Disposal Considerations
: Have waste liquids, containers and other materials disposed of by
licensed industrial waste contractors.
Keep waste liquids from flushing containers, machines or other
equipment from flowing directly to the ground or drainage.
Dispose of wastes from drainage, combustion, etc, in compliance with
laws and regulations on waste disposal or cleaning, or have them
disposed of by contractors.
To avoid harmful gases, do not use incinerators without flushing
systems to burn wastes and other materials.
Comply with all EU, national and local regulations.
Do not dump this product into sewers, on the ground or into any body
of water.
14. Transport Information
Check a thing without a leak in a container.
Perform prevention of collapse of cargo surely.
Us Department of Transportation (DOT)
Hazardous Materials
: Not Applicable
Sea Transport (IMDG)
Class
: No classification assigned.
Packing Group (PG)
:-
UN Number
:-
Proper Shipping Name
:-
Marine Pollutant
:-
Air Transport (ICAO/IATA)
Material Safety Data Sheets
Class
: No classification assigned.
Packing Group(PG)
:-
UN Number
:-
Proper Shipping Name
:-
Product Name:SS ink Light Cyan
MSDS No.031-34S013C
First issue:2008/06/18
Revised:2012/04/26
Page 8 of 8
15. Regulatory Information
OSHA Status
: Not Applicable
TSCA Status
: All components on TSCA INVENTORY.
Cercla Reportable
: Not Applicable
Quantity
(40 CFR 117, 302)
SARA TitleⅢ
Section 302
: Not Applicable
(40 CFR 355)
Section 311/312
: Not Applicable
(40 CFR 370)
Section 313
: Not Applicable
(40 CFR 372)
Others
: Please refer to any other federal, state and local regulations.
16. Other Information
This information is furnished without warranty, express or implied, except that it is accurate to
the best knowledge of Mimaki Engineering Corporation.
It relates only to the specific material designated herein, and dose not relate to use in
combination with any other material or process.
Mimaki Engineering Corporation assumes no legal responsibility for use or reliance upon this
information.
Revision history
Version
Date
Content
1.0
2008/05/16
First issue.
2.0
2012/04/26
No.3 Revise CAS No. and Chemical Formula
Download PDF