DSDCL

Item _____________________________________
Quantity _ ________________________________
Concepts™ Serving Systems
Self-Contained LiquiTec® Cold Pan Serving Counter
CSI Section 11400
Approved _ _______________________________
Date _____________________________________
Models
•
DC-L2
Self-contained LiquiTec® cold pan serving counter, fits two standard 12”x20” pans
•
DC-L3
Self-contained LiquiTec® cold pan serving counter, fits three standard 12”x20” pans
•
DC-L4
Self-contained LiquiTec® cold pan serving counter, fits four standard 12”x20” pans
•
DC-L5
Self-contained LiquiTec® cold pan serving counter, fits five standard 12”x20” pans
•
DC-L6
Self-contained LiquiTec® cold pan serving counter, fits six standard 12”x20” pans
Standard Features
•
•
•
•
•
•
•
•
•
•
DC-L4
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
Flush mounted pans
Individual 0.5” stainless steel drains
Thermostat for temperature control
High
density
foamed
in
place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Must be hard wired in field
One year parts and labor standard
warranty
Options &
Accessories
•
•
Custom lengths available per inch
Granite, Hanstone and Solid Surface
top materials
• Laminated base panels
• Finished stainless steel or laminated
end panels
• Décor panels
• Graphics packages
• FlexiShield® foodshields
• Signage with overstructures, lights
and heatlamps
• Refrigerated base inserts
• Heated base inserts
• Dry storage base inserts
• Mechanical access doors
• Casters (stand alone units only)
• Kickplates (units with legs only)
• Tray slides
• Adapter plates and bars
• Remote
refrigerant
(specify
refrigerant)
• 220v/50 cycle*
* Inclusion of this option will alter
electrical specifications of the unit
Specifications
Exterior body is constructed of 0.75” Melamine reinforced
front and rear panels with 22 gauge stainless steel skin and
1” polyethylene horizontal rib supports. Horizontal brace on
rear is constructed of 18 gauge galvanized steel. The exterior
ends are unfinished.
Exterior top is constructed of 14 gauge stainless steel.
Horizontal top supports on front and rear are constructed with
18 gauge galvanized steel.
Interior base bottom is constructed of 16 gauge galvanized
steel. Vertical base support braces are 14 gauge galvanized
steel. Top end supports are 12 gauge stainless steel.
requirements. The cold pan is separated from the exterior top
by a thermal break. Copper refrigeration tubing is attached
to the sides of every well. Eutectic fluid is used as the heat
transfer medium. Cold pan is fully insulated with foamed in
place polyurethane insulation. Cold pans are equipped with
a 0.5” stainless steel drain plumbed to the drain valve located
behind the hinged louvered door.
Refrigeration system uses HFC-404A refrigerant and has a
self-contained 115 volt, 60 Hertz, single phase hermetically
sealed condensing unit with adjustable cold pan thermostat
control.
Legs: Bases mounted on 6.12” adjustable legs.
The LiquiTec® cold pan has 2-6 die stamped 19.87” x 11.87”
(50.5cm x 30.2cm) openings with depressed edges. Formed
well below each opening is 6.25” (15.9cm) deep with 0.5” drain
manifold to gate valve. Each well, flush with the top, for flush
mount pans to accommodate 12” x 20” (30.5cm x 50.8cm) pans
4” (7.6cm) or 6” (15.2cm) deep, supplied by others. Product
temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained
at 86˚F (30˚C) ambient room temperature, meeting NSF7
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Concepts™ Serving Systems: Self-Contained LiquiTec® Cold Pan Serving Counter
Project ___________________________________
Self-Contained LiquiTec® Cold Pan Serving
Counter
38.00
[97cm]
52.00
[132cm]
66.00
[168cm]
36.00
[91cm]
36.00
[91cm]
36.00
[91cm]
DC-L3 Plan View
DC-L2 Plan View
DC-L4 Plan View
DC-L3 Elevation View
DC-L2 Elevation View
DC-L4 Elevation View
Concepts™ Serving Systems
80.00
[203cm]
94.00
[239cm]
36.00
[91cm]
36.00
[91cm]
DC-L5 Plan View
DC-L6 Plan View
DC-L5 Elevation View
DC-L6 Elevation View
36.00
[91cm]
6.12
[16cm]
All Models Right Side View
Specifications
Model
Length
Depth
Height
# of 12”x20”
Pans Held
H.P.
V/Hz/Ph
Amps
BTU
Ship Weight
DC-L2
38.00”
36.00”
36.00”
2
1/4
115/60/1
7.0
379
342lbs/155kg
DC-L3
52.00”
36.00”
36.00”
3
1/4
115/60/1
7.0
569
468lbs/212kg
DC-L4
66.00”
36.00”
36.00”
4
1/4
115/60/1
7.0
758
594lbs/269kg
DC-L5
80.00”
36.00”
36.00”
5
1/4
115/60/1
7.0
948
720lbs/327kg
DC-L6
94.00”
36.00”
36.00”
6
1/4
115/60/1
7.0
1138
846lbs/384kg
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSDCL
03/10
Download PDF