BCA1505MSP-110

AC BATTERY
CHARGER
MODEL
BCA1505MSP-110-24NC
Benefits
• Ultra-Quiet
• Power sensitive electronics without interference
• Rugged & Reliable
• Ensure years of safe and trouble free operation
• Fast & Accurate Charging
Design Features
• Ideal as a COTS Power Supply for Military Applications
• Military-Grade extrusion ensures a high tolerance for shock
and vibration
• Ultra-quiet low EMI operation
• Can be left permanently connected
• Can function as a power supply
• Temperature compensated charging
• Over-temperature shutdown
• Audible & visual indicators for low output voltage &
over-temperature
• Short circuit protection
• Output over-voltage crowbar
• Inrush Current Limiting with solid state bypass
Description
• Designed to meet MIL-STD 810F, Method 514-3, Cat-I Proc I
for vibration
The BCA1505MSP-110-24NC battery charger provides up to 1350 watts
to charge a 24 Volt battery system (2 bank) from a 110VAC source. The
batteries must share a common ground. Auto-ranging input is an option.
This all-new single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quiet operation.
Multiple stages of filtering reduce radiated or conducted noise to very
low levels. Extra features include visual indicators for low input voltage,
charging and over-temperature.
Safety features include both charger and battery over-temperature shutdown, current limiting, short circuit protection with automatic recovery,
input undervoltage shutdown and output over-voltage crowbar.
We are confident that you will get many years of reliable service from
this AC Battery Charger.
Applications
Most of the products manufactured by Analytic Systems can be adapted
for military use (Commercial Off The Shelf).
We provide four different levels of ruggedization; most often, a product
in military use will use the extra-wide temperature range components
to allow operation to -40 degrees Celsius.
The printed circuit boards are also protected against condensation and
are enhanced with vibration protection that meets or exceeds
MIL-STD810F, Method 514-3 and Cat-1 Proc 1.
C.O.T.S. products are designed to meet various levels of EMC radiated
and conducted emissions MIL-STD 461E.
All C.O.T.S. products are manufactured in accordance with IPC-A-610.
An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters
8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
www.analyticsystems.com
AC BATTERY MODEL
CHARGER
BCA1505MSP-110-24NC
Electrical (Input)
Nominal (ip)
110
Actual (Vac)
90-130 VAC
Input Amps (max)
16.2
Input Breaker
25A
Input Frequency
45-65 Hz
Noise on Input
< 50mV
Electrical (Output)
Output Nominal (op)
24
Output Volts (DC) (Float)
27.2 ±0.05
Charging Amps
50
Battery Banks
1 or 2
Battery Size (Amp Hrs.)
200-300
Output Crowbar
34.0 ± 1.0V
Temperature Compensation Coefficient
-60mV/°C
Duty Cycle
Continuous 100% for 24 hours per day
Efficiency
81-82% @ Maximum Output
Stages
2
Regulation
< +/- 0.5%
Environment Specification
Operating Temp. Range
-40° to +50°C @ maximum output
Derate Linearly 2.5% per °C from 50°C
Humidity
0 - 95% Relative Humidity (non-condensing) with optional conformal coating
Audible Noise
NONE Ødb @ 3 ft (34.5 dB when fan operating)
Typical Service Life
> 10 yrs. (87,600 hrs)
Isolation
Input-Case & Input-Output 1500VDC / Output-Case 500VDC (1500VDC @ 48V Output)
Mechanical Specification
Length
21.5 in
Width
9.5 in
Height
5.5 in
Clearance
1" inch (2.5 cm) all around
Material
Marine Grade Aluminum
Finish
Black
Fastenings
All 18-8 Stainless Steel
Weight
21.7 lb
Connections
NATO Receptable, ABORD954
Warranty
2 years
Safety
Designed to meet UL458 & CSA 22.2.107.1
Note: Specifications are subject to change without notice.
An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters
8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
www.analyticsystems.com
Download PDF