ENGLISH
User's Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.
Downloaded from www.Manualslib.com manuals search engine
Instructions
Use this camera in the following order
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.75)
Take a picture (p.22)
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.81)
Check the camera’s power
If the power is turned off, press the camera button
to power it on.(p.24)
Open Window s EXPLORER and search for
[Removable Disk].(p.82)
If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
2
Downloaded from www.Manualslib.com manuals search engine
Contents
camera
READY
24
POWER button
24
Getting to know your camera
5
SHUTTER button
24
About the icons
5
ZOOM W button/ ZOOM T button
24
Danger
6
Voice memo/ UP button
26
Warning
6
Macro / Down button (Focusing)
26
Caution
7
Fixed focus
27
An FCC warning
7
FLASH / LEFT button
27
This digital camera can be used for
8
Self-timer / Right button
29
Manufacturer's contents
10
MENU/ OK button
30
Identification of features
11
Play mode / LCD button
30
Front & Top
11
Using the LCD monitor to adjust the
Back
11
camera
31
Bottom / 5-function button
12
How to use the menu
33
Mode switch
12
Mode
33
Function Lamp
13
Size
34
Connecting to a Power Source
14
Quality
35
Using the AC power adapter (5V 2.0A)
15
Metering
36
Using the batteries
16
ISO
36
Removing the battery
16
White balance
37
Effect
38
Precautions on Using the Memory
Stick Duo
17
Shooting
38
Inserting the memory card
19
Sharpness
39
Removing the memory card
19
Exposure
40
Manual Exposure (Night Mode)
40
RECORDING
PLAY
LCD monitor indicator
20
Starting the recording mode
21
Things to Watch Out for When Taking
Pictures
Using the camera buttons to adjust the
23
Starting play mode
41
Playing back a still image
41
Playing back a movie clip
42
Playing back a recorded voice
42
3
Downloaded from www.Manualslib.com manuals search engine
Contents
LCD monitor indicator
43
Using the camera buttons to adjust the
Function lamp
61
Selecting Video out type
62
camera
44
Quick view
63
Thumbnail/ Enlargement button
44
Setting up the MyCAM menu
64
Voice memo/ Up button
45
Start up image
64
Delete/ DOWN button
46
Start up sound
65
LEFT / RIGHT/ MENU/ OK button
47
Shutter sound
65
LCD button
47
Important notes
66
Warning indicator
68
Setting up the play back function using the
LCD monitor
48
Before contacting a service center
69
Deleting all images
49
Specification
71
Protecting images
49
Starting the slide show
50
Resize
51
COPY TO CARD
52
Software Notes
73
DPOF
53
System Requirements
73
DPOF : STANDARD
53
About the software
74
DPOF : INDEX
54
Setting up the application software
75
DPOF : CANCEL
54
Starting PC Mode
81
SOFTWARE
Removing the USB Driver for
SETUP
Windows 98SE
84
Removable Disk
85
Setup menu
55
Removing the removable disk
86
File name
56
Setting up the USB Driver for MAC
87
Auto power off
57
Using the USB Driver for MAC
87
Language
58
Digimax Viewer 2.1
88
Formatting a memory card
58
Using PhotoImpression
89
Setting up the Date/ Time/ Date type
59
FAQ
90
Imprinting the recording date
59
Sound
60
LCD brightness
60
Initialization(RESET ALL)
61
4
Downloaded from www.Manualslib.com manuals search engine
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Batteries, Memory card etc.) to the A/S center.
Please check that the camera is operating properly prior to when you intend to use it (e.g. for
a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
Keep the manual in a safe place.
Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
Memory Stick Duo is a registered trademark of Sony Corporation.
All brand and product names appearing in this manual are registered trademarks of their
respective companies.
About the icons
This manual contains instructions on using this camera that will help you to use this camera
safely and correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided,
may result in a minor or moderate injury.
5
Downloaded from www.Manualslib.com manuals search engine
Danger
Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service Center.
Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source (batteries or AC Power Adapter). You must
contact your dealer or Samsung Camera Service Center. Do not continue to use the camera
as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access points
e.g. the memory card slot and battery chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.
Warning
Do not use the flash in close proximity to people or animals. Positioning the flash too close to
your subject’s eyes, may cause eyesight damage.
When taking photographs, never point the lens of the camera directly into very strong light.
This may result in permanent damage to your eyesight.
For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
Swallowing batteries or small camera accessories. If an accident should occur, please
consult a doctor immediately.
There is the possibility of injury from the camera’s moving parts.
Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
Do not recharge non rechargeable batteries. This may cause an explosion.
Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to
extreme temperatures may adversely affect the camera s internal components and could
cause a fire.
When in use, do not cover the camera or AC Power Adapter. This may cause heat to build up
and distort the camera body or cause a fire. Always use the camera and its accessories in a
well-ventilated area.
6
Downloaded from www.Manualslib.com manuals search engine
Caution
Leaking, overheating, or burst batteries could result in fire or injury.
Use batteries with the correct specification for the camera.
Do not short circuit, heat or dispose of batteries in fire.
Do not insert the batteries with the reverse polarities.
Remove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and irreparably damage the camera's components.
Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC Power Adapter.
After use, always switch off the camera before unplugging the adapter from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
An FCC warning
This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection against
harmful interference in commercial installation. This equipment generates, absorbs and
can emit radio frequency energy. If it is not installed and used in accordance with the
instructions, it may cause harmful interference to radio communication. There is
however, no guarantee that interference will not occur in some situations. Should any
interference occur when this device is in operation, please try one or more of the
following measures.
Change the location and direction of any aerial.
Increase distance between the camera and the affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.
7
Downloaded from www.Manualslib.com manuals search engine
This digital camera can be used for
Viewing images on a TV.
(refer to page 62)
Printing images using a dedicated
printer, DPOF-compatible printer or
DPOF-equipped photo lab.
(refer to page 53)
Downloading image files
from camera to computer.
(refer to page 82)
Taking a picture.
(refer to page 22)
Editing images on a PC.
(refer to page 89)
8
Downloaded from www.Manualslib.com manuals search engine
This digital camera can be used for
Creation of a digital photo album.
Recording your voice.
(refer to page 22)
You can even create your own unique gift wrap
paper by using your digital images.
Taking a favourite image and creating
your own personalized calendar with it.
Recording a movie clip
(refer to page 21)
Inserting images directly into any
electronic document.
9
Downloaded from www.Manualslib.com manuals search engine
Manufacturer's contents
Please check that you have the correct contents before using this product.
marked contents are optional.
Digital Camera
Pouch
AV cable
USB cable
Camera strap
User manual
Product warranty
Software CD
Digimax Reader
Rechargeable
battery(SLB-1037)
10
Downloaded from www.Manualslib.com manuals search engine
AC adapter(5V)
Memory Stick Duo
Duracell
CP-1 battery
Identification of features
Front & Top
Power button
Viewfinder
Shutter button
Lens
Function
Lamp
Flash
USB/ AV
connection
terminal
DC input
connection
point
Back
Flash status lamp(Red)
Autofocus lamp(Green)
Viewfinder
Play mode /
LCD button
Mode switch
Microphone
5-function
button
Strap eyelet
LCD monitor
Zoom T button
(Digital zoom)
Speaker
Zoom W button
(Thumbnail)
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the viewfinder. The picture will be
taken in the composition of the picture as it appears on the LCD monitor.
11
Downloaded from www.Manualslib.com manuals search engine
Identification of features
Bottom / 5-function button
Battery chamber cover
Voice memo/ UP button
Battery chamber
FLASH/
LEFT
button
SELF-TIMER/
RIGHT button
MENU/ OK
button
Memory card slot
Macro/ Delete/ Down button
Battery holder
Mode switch
You can select the desired working mode by using the mode switch located on the back of
the camera. This digital camera has 3 recording modes. These are listed below.
Movie clip mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Image size and type are listed below.
- Image size
: 640X480, 320X240
(User selectable)
- Movie clip file type : *.avi (MJPEG)
Voice recording mode
A voice recording can be recorded for as long as the
available recording time of the memory capacity allows.
(Max : 1 hour)
Voice recording file type : *.wav
12
Downloaded from www.Manualslib.com manuals search engine
Identification of features
Still image mode
You can select from AUTO(
), Night(
MYSET(
), TEXT(
) modes.
),
Lamp
Type
Function Lamp
Camera Status Lamp
LCD Monitor
When turning on the
power
Blue lamp blink and then turns off when
the camera is ready to take a picture
Green lamp blinks
X
When the camera is in focus (when the
SHUTTER button is pressed halfway)
X
Green lamp lights up
Autofocus mark
lights up green
When the camera is out of focus (when
the SHUTTER button is pressed halfway)
X
Green lamp blinks
Autofocus mark
lights up red
While the flash is charging
X
Red lamp blinks
X
Flash is ready (when the SHUTTER
button is pressed halfway)
X
Red lamp lights up
X
While saving an image
X
Green lamp blinks
X
X
Green lamp blinks
While shooting a video
X
X
The blue lamp blinks in a sequence.
During voice recording
Green lamp lights up
While the camera is connected to a PC
X
Green lamp blinks
While transferring data between the camera and a PC
X
When shooting an image Blue lamp blinks once for 1 second
X
When the self-timer is activated,
for the first seven seconds, the
While the self-timer is
blue lamp blinks at 1 second
Green lamp lights up
intervals. For the final three
running
seconds, the blue lamp blinks
rapidly at 0.25-second intervals.
When the LCD monitor is
Green lamp lights up
X
turned off in Still Image mode
X
X
X
X
Autofocus mark
lights up green
X
13
Downloaded from www.Manualslib.com manuals search engine
Connecting to a Power Source
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5V 2.0A).
We recommend using batteries for a digital camera. (Within a year from the date of
manufacture) The batteries are listed below.
Non rechargeable batteries : CP-1 battery
Rechargeable batteries
: Digimax power pack(SLB-1037)
The product package may very depending upon which country in which you are located.
Charging the rechargeable battery
[Digimax power pack (SLB-1037)]
Charging the battery
- Insert the rechargeable battery into
the battery slot of the camera(p.16)
- Use the AC adapter included to
connect the power supply of the
camera to a wall power socket.
Following function lamp indicates charging status of the rechargeable battery.
Function lamp display
(Blue LED)
One LED blinks
Charging
0% charged.
Two LEDs blink
Three LEDs turn on
About 50% charged. About 100% charged.
INFORMATION
If the function lamp display does not work even after inserting the rechargeable battery and
connecting the power supply, please double-check the rechargeable battery polarity. (p. 16)
Please do not connect the AC adapter after inserting a non-rechargeable battery.
When charging the rechargeable battery using the camera, the working temperature is
5 ~ 40 . Please note that when the temperature is outside of the optimal charging
range, the charging process may become slow or stop.
When charging the rechargeable battery using the camera, the following sequential blinks
of the operational function lamp (BLUE) mean unsuccessful charging process.
Please check whether the battery is correctly inserted and the temperature is within the
optimal charging range. If the problem still persists, please visit a nearby service center.
14
Downloaded from www.Manualslib.com manuals search engine
Connecting to a Power Source
INFORMATION
Important information about battery usage
When the camera is not used, turn off the camera power.
Please do not charge the non rechargeable battery. It may cause an explosion or fire.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below 0 ) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
If you are planning to use this camera for long periods of time, it is advisable to use an AC
adapter (5V 2.0A).
Using the AC power adapter (5V 2.0A)
If you have access to a mains supply, using an
AC Adapter (5V,2.0A) allows the camera to be
used for long periods of time.
Plug the adapter into the connection point (DC IN
5V) on the camera.
Remove the batteries when using the AC adapter.
DANGER
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (5V 2.0A) with the correct specification for the
camera. Failure to do so may affect your warranty.
15
Downloaded from www.Manualslib.com manuals search engine
Connecting to a Power Source
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the
polarity(+and-)
Using the batteries
1. Open the battery chamber
cover by pushing in the
direction of the arrow.
2. Insert the batteries
according to the polarity
marks (+ and -) on the
back of the battery
chamber cover.
3. To close the battery
chamber cover, push it
until it clicks.
Removing the battery
1. Turn off the camera power. Open the battery chamber
cover and unlock the battery by pushing the battery lock
lever. The battery will pop up slightly.
2. Remove the battery in the direction indicated and close the
battery chamber cover.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
The batteries are fully
There is no battery capacity.
Prepare new batteries.
charged.
Replace with new batteries.
16
Downloaded from www.Manualslib.com manuals search engine
Precautions on Using the Memory Stick Duo
This camera operates only with a Memory Stick Duo.
Some models of Memory Stick Duo media do not have the write-protect switch (B).
Card pins(A)
Write
protect
switch(B)
Label(C)
Back
Front
Do not touch the card pins (part A)
with your fingers or with metal objects.
Do not press hard when writing on the
label (part C).
If you insert the Memory Stick Duo
into the Memory Stick Duo adapter,
you will be able to use it with a
Memory Stick-compatible device.
[ Memory Stick Duo ]
Do not insert the Memory Stick Duo on its own into a Memory Stick-compatible device.
Do not insert the Memory Stick Duo adapter into a Memory Stick-compatible device without
attaching the Memory Card Duo to the adapter. Using it without the Memory Stick Duo may
adversely affect the device into which it is inserted.
Be sure to check the proper direction of insertion before use .
Insert the Memory Stick Duo all the way into the Memory Stick Duo adapter.
If the Memory Stick Duo is not inserted correctly into the adapter, it may not operate properly.
Do not attach labels to any part of the Memory Stick Duo and Memory Stick Duo adapter.
The labels may come off as you insert the Memory Stick Duo into the adapter or into a
Memory Stick-compatible device.
When inserting the Memory Stick Duo into the slot, do not force or bend it.
Do not touch the Memory Stick Duo adapter's card pins with your fingers or with metal
objects.
Do not allow dirt or foreign material to get into the Memory Stick Duo adapter slot.
Do not leave the Memory Stick Duo with its adapter in areas subject to high temperatures.
Those models with the write-protect switch on the back of the card prevents accidental
erasure of data from deletion or formatting. By sliding the switch to the top of the memory
card, the data will be protected. By sliding the switch to the bottom of the memory card, the
data protection ability will be canceled. Please use a pointed object to move the write-protect
switch. Slide the switch to the bottom of the memory card before taking a picture.
17
Downloaded from www.Manualslib.com manuals search engine
Precautions on Using the Memory Stick Duo
Maintenance of the Memory Stick Duo
(Hereafter the Memory Stick Duo is referred to as the "Memory Card".)
The camera comes with 32MB of internal flash memory, allowing you to store images and
movie clips in the camera. However, you can expand the memory capacity by using an
optional memory card so that you can store more images and movie clips.
Be sure to format the memory card (see p. 58) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card's performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or subject the memory
card to any heavy impact.
Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in temperature.
Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
Do not use a memory card that has been used in another digital camera or memory card
reader.
Do not use a memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
Do not remove the memory card while the autofocus lamp(Green) is blinking.
Doing so will corrupt the data on the memory card.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
If there are no shots remaining
When you press the shutter button, a [CARD FULL !] message is displayed and the camera
will not operate. To optimize the amount of memory in the camera, replace the memory card
or delete unnecessary images stored in the memory.
18
Downloaded from www.Manualslib.com manuals search engine
Inserting the memory card
1. Turn off the camera power and pull the battery chamber
cover in the direction of the arrow to open.
2. Have the front of the memory card face toward the front of
the camera (lens) and the card pins toward the back of the
camera(LCD monitor), and then push the memory card into
the card slot until you hear a click.
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do not
attempt to insert it by force. Check the direction of insertion,
and then insert it correctly.
INFORMATION
Do not insert the memory card the wrong way round . Doing so may damage the memory
card slot.
Removing the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and gently push the
memory card until it makes a clicking sound. The memory
card will pop up slightly.
2. Remove the memory card in the direction indicated and
close the battery chamber cover.
19
Downloaded from www.Manualslib.com manuals search engine
LCD monitor indicator
The LCD monitor displays information about the shooting functions and selections.
[ Image & Full Status ]
No.
Description
1
Battery
p.16
2
Recording mode
p.12~13
3
Camera shake warning
p.23
4
Flash
p.28
5
Self-timer
p.29
6
Macro
p.26
7
Metering
p.36
8
Exposure compensation
9
Auto focus frame
10
Time
01:00 PM
p.59 ~ 60
11
Date
2004/05/01
p.59 ~ 60
12
MS DUO indicator
p.19
13
White Balance
p.37
14
ISO
p.36
20
Downloaded from www.Manualslib.com manuals search engine
Icons
LT
Page
p.40
LCD monitor indicator
15
Sharpness
p.39
16
Image quality
p.35
17
Image size
2272, 2048, 1600, 1024, 640
18
Number of available shots remaining
29
Remaining time (Movie clip/ Voice recording)
00:01:50 / 01:00:00
p.21 ~ 22
19
Digital Zoom rate
X4.0
p.25
20
Digital Zoom
21
Voice memo
p.34
p.26
Starting the recording mode
If the memory card is inserted in the camera, all the camera functions apply only to the memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Recording a Movie clip
1. Insert the batteries (p.16). Insert the batteries taking note
of the polarity (+ / -).
2. Insert the memory card (p.19). As this camera has a 32MB
internal memory, you do not need to insert the memory
card. If the memory card is not inserted, an image will be
stored in the internal memory. To expand memory capacity,
insert a memory card. If the memory card is inserted, an
image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP(
) mode by sliding the mode
switch.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press
the shutter button again.
Image size and type are listed below.
- Image size
: 640X480, 320X240(Selectable)
- File type
: *.avi(MJPEG)
STANDBY
[ MOVIE CLIP mode ]
21
Downloaded from www.Manualslib.com manuals search engine
Starting the recording mode
Recording Voice
Steps from 1-4 are the same as those for recording a
movie clip.
5. Select the VOICE RECORDING(
) mode by sliding
the mode switch.
6. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for
as long as the available recording time(Max:1hour)
allows. The recording time will be displayed on the LCD
monitor.
- Voice will still be recorded if the shutter button is
released.
- If you wish to stop recording, press the shutter button again.
- Voice recording file type: *.wav
[ VOICE RECORDING mode ]
INFORMATION
A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
Recording a still image
Steps from 1-4 are the same as those for recording a
movie clip.
5. Select the STILL IMAGE(
) mode by sliding the
mode switch.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
[ STILL IMAGE mode ]
22
Downloaded from www.Manualslib.com manuals search engine
Things to Watch Out for When Taking Pictures
Pressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge. (See page 13) Press
the shutter button all way down to take the picture.
[ Lightly press the shutter button ]
[ Press the shutter button ]
The available recording time may vary depending on shooting conditions and camera
settings.
When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, change the flash
mode to flash shot mode.
Backlight compensated shots : When taking an outdoor shot, avoid facing the sun, as the
image may be dark because of the strong backlight. In backlight conditions, please use Fill-in
flash(p.28), Spot metering(p.36) or Exposure compensation(p.40).
Avoid obstructing the lens or the flash when you capture an image.
As there can be some differences between what is seen through the Viewfinder and the
resulting image when taken at a range closer than 1.5m, it is recommended that you use the
LCD monitor to compose these shots.
Using the LCD monitor extensively will drain the batteries.
We recommend turning off the LCD monitor and using the optical viewfinder as often as
possible in order to extend battery life.
Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow (such as a
stick or flagpole).
- When the surroundings are dark
23
Downloaded from www.Manualslib.com manuals search engine
Using the camera buttons to adjust the camera
The RECORDING mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera’s power on / off.
If there is no operation during the specified time, the
camera’s power will be turned off automatically to save
battery life.
SHUTTER button
Used for taking an image or recording voice in the
RECORDING (STILL IMAGE, VOICE RECORDING,
MOVIE CLIP) mode.
In MOVIE CLIP mode :
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and
the movie clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop
recording, press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of
the flash.
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after storing the image data
is complete.
ZOOM W button/ ZOOM T button
Used for digital zooming in / out.
When you press the ZOOM W/T button, the zoom bar will
display in the upper center part of the LCD monitor.
24
Downloaded from www.Manualslib.com manuals search engine
ZOOM W button/ ZOOM T button
TELE Zoom
Digital zoom TELE
: Pressing the ZOOM button T activates the digital zoom software.
Releasing ZOOM T button stops the digital zooming at the
required setting. Once the maximum digital zoom (4X) is
achieved, pressing the ZOOM T button will have no effect.
You can check the digital zoom rate with the [X1.1 ~ X 4.0]
numerical mark next to the zoom bar.
Pressing
the ZOOM
T button
[ WIDE zoom ]
WIDE Zoom
Digital zoom WIDE
Pressing
the ZOOM
T button
[ Digital zoom 2.0X ]
[ Digital zoom 4.0X ]
: Pressing the zoom W button will reduce the digital zooming in
steps. Releasing zoom button W stops digital zooming.
Pressing
the ZOOM
W button
[Digital zoom 4.0X]
Pressing
the ZOOM
W button
[Digital zoom 2.0X]
[WIDE zoom]
INFORMATION
To use the digital zoom the LCD monitor has to be turned on.
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the digital zoom.
25
Downloaded from www.Manualslib.com manuals search engine
Voice memo( )/ UP button
While the menu is showing, press the UP button to move up the submenu cursor.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice-over to a stored still image.
Recording a voice memo
1. Select the STILL IMAGE mode by sliding the mode switch.
2. Press the VOICE MEMO button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
[ Preparing for Voice Memo ]
[ Recording Voice Memo ]
3. Press the shutter button and take a picture. The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the
middle of the sound recording, pressing the shutter button will stop the voice memo.
Macro(
) / Down button (Focusing)
While the menu is showing, press the DOWN button to move from the main menu to a
submenu, or to move down the submenu cursor.
When the menu is not showing, you can use the MACRO (
)/DOWN button to take macro
pictures in the 6 ~ 60cm STILL IMAGE mode.
Pressing the
MACRO button
[ Autofocus ]
[ Macro ]
INFORMATION
When the macro mode is selected, it is possible that camera shake will occur. If this is the
case, use a tripod to eliminate this.
When the macro mode is selected, it is recommended that you use the LCD monitor to
compose these shots.
26
Downloaded from www.Manualslib.com manuals search engine
Fixed focus
To focus on the subject positioned outside of the center, use the focus lock function.
Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. When the autofocus lamp (green) lights up, it means
the camera is focused on the subject. Be careful not to press the SHUTTER button all the
way down to avoid taking an unwanted pictured.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be canceled.
[ The image to be captured ]
FLASH(
[ Press the SHUTTER button
halfway and focus on the subject ]
[ Recompose the picture and fully
depress the SHUTTER button ]
) / LEFT button
When the menu is displayed on the LCD monitor, pressing
the LEFT( ) button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT( ) button operates as the FLASH ( ) button.
Selecting the flash mode
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the Flash( ) button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD
monitor.
Use the correct flash to suit the environment.
[ Selecting the Auto flash ]
Flash range(AUTO) : 0.2 ~ 2m
27
Downloaded from www.Manualslib.com manuals search engine
FLASH( ) / LEFT button
Flash mode indicator
ICON
Flash mode
Auto flash
Red eye
reduction
Description
If the subject or background is dark, the camera flash will operate
automatically.
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the red-eye
reduction function.
The flash fires regardless of available light. The intensity of the flash will
Fill in flash
be controlled, according to the prevailing conditions. The brighter the
background or subject is, the less intense the flash will be.
The flash will operate in conjunction with a slow shutter speed in order to
Slow synchro
obtain the correct exposure.
When you take an image in a condition with poor light, the camera shake
warning indicator (
) will display on the LCD monitor.
The flash does not fire. Select this mode when capturing images in a
Flash off
place or situation where flash photography is prohibited. When you
capture an image in a poorly lit condition, the camera shake warning
indicator (
) will display on the LCD monitor.
INFORMATION
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 5
seconds. If the batteries are weak, the charging time will be longer.
During the movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly reflective.
The LCD monitor is turned off for a while after using the flash to recharge it.
28
Downloaded from www.Manualslib.com manuals search engine
Self-timer(
) / Right(
) button
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the sub tab.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer(
) button. This function is used when the photographer would also like to be in the
image.
Selecting the self-timer
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the SELF-TIMER button until the desired mode
indicator displays on the LCD monitor.
A 10 second, 2 second or Double self-timer icon
appears on the LCD monitor.
10SEC self-timer (
):
Pressing the shutter button will allow an interval of 10
seconds before the image is taken.
2SEC self-timer (
):
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
Double self-timer (
):
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When using
the flash, the 2-second self-timer may be delayed for longer
[ Selecting the 10SEC self-timer ]
than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the specified time
has elapsed.
INFORMATION
The default is OFF.
When taking a picture using the self-timer, the function lamp works as follows:
10 second self-timer setting : The function lamp blinks at 1 second interval for the first 7
seconds. It blinks at 0.25 second interval for the remaining
3 seconds.
2 second self-timer setting : The function lamp blinks at 0.25 second interval for 2
seconds.
If you operate the Power button, Mode switch, and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
The only self-timer option available during the recording of a movie clip is the 10 second option.
When in the voice recording mode and TEXT mode, the self-timer function does not work.
29
Downloaded from www.Manualslib.com manuals search engine
MENU/ OK button
If the menu is displayed, use the 5-Function buttons to change the data values and for your
changes to be accepted
If the menu is not displayed, press the MENU/OK button to display a menu for the current
camera mode on the LCD monitor. Press the button again to return to the previous state.
Pressing the
MENU
button
[ Menu off ]
Play mode(
2272
MODE
AUTO
NIGHT
MYSET
TEXT
[ Menu on ]
) / LCD button
Press and hold the Play mode / LCD(
) button for 2
seconds to play pictures saved in the memory
Press (but do not hold down) the Play mode / LCD(
)
button while playing saved pictures to see the current image
information in the LCD
Repeatedly press (but do not hold down) the Play mode /
LCD(
) button in the Normal mode to display the further
information in the LCD.
Pressing the
LCD button
[ Image & full information ]
Pressing the
LCD button
[ Image & basic information ]
Pressing the LCD button
30
Downloaded from www.Manualslib.com manuals search engine
AUTO
[ LCD off ]
Using the LCD monitor to adjust the camera
You can use the menu on the LCD monitor to set up recording functions.
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed. ( when the autofocus lamp next to the viewfinder
blinks)
- When there is no battery capacity.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
The following functions are available, depending on the mode you have selected.
The items indicated by
Menu tab
Main menu
are default settings.
Sub menu
Camera working mode
AUTO
NIGHT
MODE
MySET
TEXT
2272X1704
2048X1536
1600X1200
SIZE
1024X768
640X480
640X480
320X240
S. FINE
QUALITY
FINE
NORMAL
31
Downloaded from www.Manualslib.com manuals search engine
Using the LCD monitor to adjust the camera
Menu tab
Main menu
Sub menu
MULTI
METERING
SPOT
AUTO
100
ISO
200
400
WHITE
BALANCE
AUTO
DAYLIGHT
CLOUDY
SUNSET
FLUORESCENT TUNGSTEN
NORMAL
EFFECT
B&W
SEPIA
SINGLE
SHOOTING
CONTINUOUS
AEB
SOFT
SHARPNESS
NORMAL
VIVID
EXPOSURE
+2.0EV~+0.0EV ~-2.0EV
MANUAL
AUTO
EXPOSURE
1/8, 1/4, 1/2, 1, 2, 4, 8 SEC
32
Downloaded from www.Manualslib.com manuals search engine
Camera working mode
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the LEFT
or RIGHT button.
2272
MODE
AUTO
NIGHT
MYSET
TEXT
AUTO
Press the LEFT
or RIGHT button.
AUTO
SIZE
2272X1704
2048X1536
1600X1200
1024X768
2272
ISO
AUTO
AUTO 2272
QUALITY
S.FINE
FINE
NORMAL
3. Use the UP and DOWN buttons to select a sub menu.
Press the UP
or DOWN button.
2272
MODE
AUTO
NIGHT
MYSET
TEXT
AUTO
2272
MODE
Press the UP
or DOWN button.
AUTO
NIGHT
MYSET
TEXT
2272
MODE
AUTO
NIGHT
MYSET
TEXT
4. Select a sub menu, and then press the OK button.
The value you set will be saved and the menu will disappear.
Mode
You can select the desired Still Image mode.
AUTO
NIGHT
MYSET
TEXT
: Use this for shooting basic still images.
: Use this for shooting still images at
night or in other dark conditions.
: Use this to store your custom settings
for the camera. Any changes made to
settings other than Self-Timer and
Voice Recording will be saved.
: Use this mode to shoot a document.
2272
MODE
AUTO
NIGHT
MYSET
TEXT
AUTO
[ STILL IMAGE mode ]
33
Downloaded from www.Manualslib.com manuals search engine
Mode
INFORMATION
In the Text mode, the camera uses the macro-shooting mode, and the flash function
does not work.
An image captured in the TEXT mode can be changed as text file type by using the
Digimax Reader. For detailed instruction on how to use Digimax Reader, please refer to
the program's Help.
Size
You can select the image size appropriate for your application.
Mode
Icon
Size
STILL IMAGE mode
2272
2048
1600
MOVIE CLIP mode
1024
2272x1704 2048x1536 1600x1200 1024x768
640
640
320
640x480
640x480
320x240
AUTO
NOR
SIZE
2272X1704
2048X1536
1600X1200
1024X768
SIZE
2272
[ STILL IMAGE mode ]
640X480
320X240
320
[ MOVIE CLIP mode ]
Fixed as [2272X1704] in the TEXT mode.
INFORMATION
The higher the resolution, the lower the remaining shots will be because high resolution
images require more memory than lower resolution images.
34
Downloaded from www.Manualslib.com manuals search engine
Quality
You can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.
STILL IMAGE mode
Mode
Icon
Sub menu
S.FINE
FINE
NORMAL
File Format
jpeg
jpeg
jpeg
ISO
AUTO
AUTO 2272
QUALITY
S.FINE
FINE
NORMAL
[ STILL IMAGE mode ]
Fixed as [FINE] in the TEXT mode.
Image Size and Quality for the Number of Images that can be saved in a Memory Card.
(When using a 32MB internal memory; based on Samsung's own testing)
Mode
STILL IMAGE mode
Quality/Size
2272
2048
1600
1024
640
S.FINE
14
16
29
67
159
FINE
28
35
58
142
306
NORMAL
43
53
80
165
360
INFORMATION
S.FINE is the highest quality and NORMAL is the lowest setting.
Choose the setting appropriate for your needs.
This file format complies with the DCF(Design rule for Camera File system).
Even if the camera should be restarted, the quality setting is maintained.
JPEG (Joint Photographic Experts Group): JPEG is the image compression standard
developed by the Joint Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it can compress the files
efficiently without damaging the data.
35
Downloaded from www.Manualslib.com manuals search engine
Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI(
)
SPOT (
)
: Exposure will be calculated based on
an average of the available light in the
ISO
2272
AUTO
image area. However, the calculation
METERING
will be biased towards the centre of
MULTI
the image area. This is suitable for
SPOT
general use.
: Only the rectangular area in the center
of the LCD monitor will be metered for
light. This is suitable when the subject in the center is exposed correctly,
regardless of the back lighting.
Fixed as [MULTI] in the TEXT mode.
INFORMATION
The default metering mode is Multi pattern metering.
If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
ISO
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
The higher the ISO value, the higher the camera’s sensitivity to light is and therefore the
greater its capacity to take pictures in dark conditions. However, the noise level in the image
will increase as the ISO value increases, making the image appear coarse.
ISO
- AUTO :
The camera's sensitivity is automatically changed by
variables such as lighting value or subject brightness.
- 100, 200, 400 :
You can increase the shutter speed while the same
amount of light is present, by increasing the ISO
sensitivity. However, the image may be saturated in high
luminance.
Fixed as [100] in the TEXT mode.
36
Downloaded from www.Manualslib.com manuals search engine
NOR
ISO
AUTO
100
200
400
ISO
AUTO
[ STILL IMAGE mode ]
White balance
White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
ISO
AUTO
NOR
WHITE BALANCE
AUTO
DAYLIGHT
CLOUDY
SUNSET
- DAYLIGHT
- CLOUDY
- SUNSET
- TUNGSTEN
- FLUOR.
NOR
AUTO
DAYLIGHT
CLOUDY
SUNSET
[ STILL IMAGE mode ]
White balance
- AUTO
320
WHITE BALANCE
[ MOVIE CLIP mode ]
: The camera automatically selects the appropriate white balance
settings, depending on the prevailing lighting conditions.
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For taking images at sunset.
: For shooting under tungsten (standard light bulb) lighting.
: For shooting under fluorescent lighting.
Fixed as [AUTO] in the TEXT mode.
37
Downloaded from www.Manualslib.com manuals search engine
Effect
By using the camera’s digital processor, it is possible to add special effects to your images.
The value you set will remain unchanged until the camera is turned off.
ISO
AUTO
320
EFFECT
EFFECT
NORMAL
B/W
SEPIA
NOR
[ STILL IMAGE mode ]
NORMAL
B/W
SEPIA
NOR
[ MOVIE CLIP mode ]
NORMAL : No effect is added to the image.
B&W
: Converts the image to black and white.
SEPIA
: Captured images will be stored in a sepia tone (a gradient of yellowish brown colours).
Fixed as [NORMAL] in the TEXT mode.
Shooting
You can select continuous shooting or AEB(Auto Exposure Bracket ) shooting in this menu.
If you select CONTINUOUS or AEB, the flash will automatically be set to Flash Off.
Shooting
- SINGLE: A picture will be taken each time you press the
Shutter button.
NOR
- CONTINUOUS: Press and hold the shutter button, and
SHOOTING
images are captured continuously.
SINGLE
This can be used for taking a moving
CONTINUOUS
subject. Use this to take pictures of
AEB
moving objects/people.
* Five continuous shots are supported regardless of
resolution and image quality. If more than five images are made, the subsequent shots will
be saved as normal image quality.
- AEB : 3 pictures will be taken continuously, 1 underexposure (-0.5EV), 1 normal exposure
(+0.0EV), and 1 overexposure (+0.5EV) respectively. However, the actual image
files saved from the three AEB exposures are saved as normal quality.
Fixed as [SINGLE] in the TEXT mode.
38
Downloaded from www.Manualslib.com manuals search engine
Sharpness
You can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied
only when the captured image is stored on the memory.
NOR
SHARPNESS
SOFT
NORMAL
VIVID
[ STILL IMAGE mode ]
Sub menu
Icon
SOFT
NORMAL
VIVID
Description
The edges of the image are softened. This effect is suitable
for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized. The edges will
appear sharp, but noise may occur in the recorded image.
Fixed as [VIVID] in the TEXT mode.
39
Downloaded from www.Manualslib.com manuals search engine
Exposure
The camera automatically adjusts the exposure depending
on external conditions such as lighting levels. However, the
user can also choose to manually set the exposure.
Fixed as [+0.0EV] in the TEXT mode.
EXPOSURE
+1.5 EV
+1.0 EV
+0.5 EV
+0.0 EV
INFORMATION
Increase the exposure to brighten the picture, and decrease the exposure to darken the
picture.
A negative exposure compensation value reduces the exposure. Note that a positive
exposure compensation value increases the exposure and the LCD monitor will appear
white or you may not get good pictures.
-2.0EV ~ +2.0EV (0.5EV steps) exposure levels are supported.
If you change the exposure value, the exposure indicator (
) will be displayed on the
bottom of the LCD monitor.
The exposure value returns to +0.0EV when the power is turned on again.
Manual Exposure (Night Mode)
Whilst the camera automatically adjusts the best shutter speed
and iris values according to the situation, the user can manually
2272
set the shutter speed in Night Scene mode.
MANUAL EXPOSURE
Configuring manual exposure (LT: Long Time Shutter)
AUTO
1. Press the menu button in normal camera mode to select
1/8 SEC
1/4 SEC
the Night Scene mode.
1/2 SEC
2. Use the Left/Right buttons to select the manual exposure tab.
3. Use the Up/Down buttons to set the shutter speed.
- Supported shutter speeds: 1/8, 1/4, 1/2, 1, 2, 4, 8 seconds
4. Press the OK button to confirm and close the menu. After setting the manual exposure, the
manual exposure indicate icon ( LT ) is displayed in the lower left of the LCD.
40
Downloaded from www.Manualslib.com manuals search engine
Starting play mode
If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
Press and hold the play mode button for 2 seconds to select play mode. The camera plays
images saved in the memory card.
If the power is turned on with the power button, press and hold the play mode button for 2
seconds to select play mode. Press and hold the play mode button for 2 seconds again to
select shooting mode. If the power is turned on with the play mode button, press and hold the
play mode button for 2 seconds to select shooting mode from play mode.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
Playing back a still image
1. Press and hold the play mode button for 2
seconds to select play mode.
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
INFORMATION
Even if the camera s power is off, you can start the play mode by pressing the play mode
button.
41
Downloaded from www.Manualslib.com manuals search engine
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/RIGHT button. If you select a
movie clip, the movie clip indicator (
) will be
displayed on the LCD monitor.
PLAY:SHUTTER
4. Press the shutter button to play back a movie clip file.
- To pause a movie clip file while playing it back, press
the shutter button again.
- Pressing the shutter button again will cause the movie clip file will restart.
- To rewind the movie clip while it is playing, press the LEFT button. To fast forward the
movie clip, press the RIGHT button.
- To stop playback of the movie clip, press the shutter button, and then press the LEFT or
RIGHT button.
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (
) will be displayed on
the LCD monitor.
PLAY:SHUTTER
4. Press the shutter button to play back a recorded voice
file.
- To pause a recorded voice file, while playing it back, press the shutter button again.
- To resume playback of the voice file, press the shutter button.
- To stop playback of the voice file, press the shutter button, and then press the LEFT or
RIGHT button.
42
Downloaded from www.Manualslib.com manuals search engine
LCD monitor indicator
The LCD monitor displays information about the shooting conditions.
No.
Description
Icon
Page
1
Battery
2
Play mode
3
File Type
4
Protect indicator
p.49 ~ 50
5
Voice memo
p.45 ~ 46
6
DPOF indicator
p.53
7
Stored image number
p.16
9
If you press the LCD button, you can check the following recording information.
SIZE
AV
TV
ISO
FLASH
DATE
: 2272X1704
: F3.2
: 1/60 S
: 100
: OFF
: 2004/05/01
SIZE
AV
TV
ISO
FLASH
: 2272X1704
: F3.2
: 1/60 S
: 100
: OFF
DATE
: 2004/05/01
Size
Aperture value
Shutter speed
ISO sensitivity
Whether or not the
flash is used.
Recording date
43
Downloaded from www.Manualslib.com manuals search engine
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Thumbnail(
) / Enlargement(
) button
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
Thumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement
button (
).
Pressing the thumbnail
button(
)
Pressing the enlargement
button(
)
1
2
3
4
5
6
7
8
9
Highlighted image
[ Normal display mode ]
[ Thumbnail display mode ]
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
44
Downloaded from www.Manualslib.com manuals search engine
Thumbnail (
) / Enlargement(
) button
When playing, 8X zoom is available regardless of the image resolution.
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
TRIMMING?
TRIM:OK
enlargement button.
CANCEL:
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Press the OK button to save the trimmed image with a new file name.
The trimmed image will be displayed on the LCD monitor.
Press the LEFT button to return to the image before it was selected.
- If there is little memory space to save the trimmed image, the image can’t be trimmed.
- An image can't be trimmed under 160X120 image size.
Voice(
) memo / Up button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your audio to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the VOICE MEMO( ) button. If the voice memo
indicator is displayed on the LCD monitor, the setting is
completed.
3. Press the shutter button to insert a 10-second voice
memo in the playing image.
START:SHUTTER
45
Downloaded from www.Manualslib.com manuals search engine
Voice(
) memo / Up button
4. The recording can be stopped by pressing the shutter
button again.
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it corresponds.
- If you add a new voice memo to the still image that already has a voice memo, the
existing voice memo will be erased.
Delete(
)/DOWN button
This deletes images stored on the memory card.
Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE(
)
button.
2. A message will display as shown alongside on the LCD
monitor.
3. Press the OK button to delete the image. The image that
precedes the deleted one will then be displayed on the
LCD monitor.
DELETE?
DEL:OK
CANCEL:
INFORMATION
When using thumbnail mode, the Delete ( ) button functions as the Down button.
You will not be able to delete an image with the Delete button.
Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
46
Downloaded from www.Manualslib.com manuals search engine
LEFT / RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab
to the right of the cursor, or to move an auxiliary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button
: When the menu is displayed on the LCD monitor, the OK button is used for
confirming data that is changed by using the 5 function button.
LCD button
The shooting information will be displayed on the LCD monitor.
Press and hold the Play (
) button for 2 seconds to
display the last taken picture in the LCD.
Pressing the LCD button in the PLAY(
) mode will
change the display as shown below. [Image & Icons]
[Image & Information] [Image only]
Pressing
the LCD
button
[Image & Icons]
SIZE
AV
TV
ISO
FLASH
DATE
: 2272X1704
: F3.2
: 1/60 S
: 100
: OFF
: 2004/05/01
[Image & Information]
Pressing
the LCD
button
[Image only]
Pressing the LCD button
47
Downloaded from www.Manualslib.com manuals search engine
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set
up in Play mode are as follows. Press and hold the Play mode button for 2 seconds to return
to shooting mode from play mode.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Secondary menu
YES
-
NO
-
DEL. ALL
Page
p. 49
ONE PIC
UNLOCK
LOCK
PROTECT
p. 49 ~ 50
UNLOCK
ALL PICS
LOCK
ON
SLIDE
OFF ~ 10SEC
REPEAT
p. 50 ~ 51
OFF
RESIZE
2048 X 1536
-
1600 X 1200
-
1024 X 768
-
640 X 480
-
320 X 240
-
p. 51
NO
-
COPY TO CARD
p. 52
YES
STANDARD
D
P
O
F
ONE PIC
00 ~ 99PRINTS
p. 53
ALL PICS
INDEX
NO
-
p. 54
YES
CANCEL
48
Downloaded from www.Manualslib.com manuals search engine
STANDARD
-
INDEX
-
p. 54
Deleting all images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted.
Deleting All images
1. Press and hold the Play mode button for 2 seconds, and
press the menu button.
2. Press the LEFT/ RIGHT button and select the [DEL.ALL]
DEL. ALL
menu tab.
YES
3. Select a desired sub menu by pressing the UP/ DOWN
NO
button and press the OK button.
Selecting [YES] : A delete confirmation window will
appear. Press the OK button to delete
all the unprotected pictures. If there aren’t protected images, all the
images are deleted and a [NO IMAGE!] message will display. Press and
hold the Play mode button for 2 seconds or slide the mode switch to
remove the message.
Selecting [NO] : The display returns to the initial menu.
INFORMATION
Remember that this will permanently delete unprotected images. Important shots should
be stored on a computer before deletion takes place.
Protecting images
This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
Protecting Images
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the
PROTECT
[PROTECT] menu tab.
ONE PIC
3. Select a desired sub menu by pressing the UP/ DOWN
ALL PICS
button and press the OK button.
MOVE:
SET:OK
[ONE PIC] : Only an image that is displayed on the
LCD monitor is protected or unprotected.
[ALL PICS] : All of the stored images are protected or unprotected.
49
Downloaded from www.Manualslib.com manuals search engine
Protecting images
4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK]
: Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can
UNLOCK:
EXIT:SH1
protect or unprotect another image by pressing the
MOVE PIC:
SET:OK
LEFT/ RIGHT button. If you press the SHUTTER button,
the Image Protection menu will disappear.
- If you protect an image, the protect icon(
) will be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from [DELETE] or [DEL.ALL] functions, but will
NOT be protected from the [FORMAT] function.
5. Press the shutter button and the menu will disappear.
Starting the slide show
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
SLIDE
menu tab.
3. Use the UP and DOWN buttons to select the desired
OFF
submenu value, and then press the RIGHT button.
EXIT:MENU
MOVE:
- Slide Show Display Interval: OFF, 1 ~10 seconds
4. Use the UP and DOWN buttons to set whether to repeat
the slide show.
[ON] : Even once a cycle(from the first image to the last
image) is completed, the slide show will continue to
SLIDE
repeat itself.
REPEAT
[OFF]: If a cycle is completed, the slide show will stop
ON
1 SEC
automatically.
OFF
5. Press the OK button and the slide show will start.
MOVE:
CHANGE:
- To pause the slide show, press the shutter button.
- To start the slide show again, press the shutter button again.
- Press the menu button again and the slide show will stop.
50
Downloaded from www.Manualslib.com manuals search engine
Starting the slide show
INFORMATION
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [PWR OFF] function can't be activated.
While the slide show is playing, only the first frame of an avi file is displayed.
In case of a voice file, the voice recording icon will appear.
Resize
You can change the resolution (size) of saved pictures. The pictures are saved under
different names.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
RESIZE
2048X1536
1600X1200
1024X768
640X480
INFORMATION
A Large image can be resized to be made smaller, but a small image cannot be resized
to become larger.
Only JPEG images can be resized.
Avi and wav files can’t be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name.
If the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
51
Downloaded from www.Manualslib.com manuals search engine
COPY TO CARD
This enables you to copy image files to the memory card.
Copying to the Memory Card
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Select the [COPY TO CARD] menu tab by pressing the
COPY TO CARD
LEFT/ RIGHT button.
NO
3. Select a desired sub menu by pressing the UP/ DOWN
YES
button and press the OK button.
- [NO] : The Play mode screen is displayed
- [YES] : All images saved in the internal memory are copied
to the memory card after the [PLEASE WAIT] message is displayed. After copying
has been completed, the screen will return to play mode.
INFORMATION
If the function is used without an inserted memory card, the [NO CARD !] message is
displayed, and the Play mode screen is displayed.
If there is not enough space available in the memory card to copy saved images in the
internal memory (32MB), the [COPY TO CARD] command will copy only some of the
images and display [CARD FULL!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary images to free up space before
inserting the memory card into the camera.
52
Downloaded from www.Manualslib.com manuals search engine
DPOF
DPOF
DPOF stands for Digital Print Order Format. It allows you to save the picture printing
information in the DCIM/MISC folder on the memory card. Select the pictures to be
printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
The DPOF function is available only for images saved in a memory card.
To add DPOF information to an image saved in the internal memory, please use the
[COPY TO CARD], to copy the image to the memory card first.
DPOF : STANDARD
This function allows you to embed print quantity information on a stored image.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
DPOF
2. Press the LEFT/ RIGHT button and select the [DPOF]
STANDARD ONE PIC
menu tab.
INDEX
ALL PICS
3. Select the [STANDARD] menu by pressing the UP/
CANCEL
DOWN button and press the RIGHT button.
BACK:
SET:OK
4. Use the UP and DOWN buttons to select [ONE PIC] or
[ALL PICS], and then press the OK button. A window for
selecting number of copies will be displayed.
[ONE PIC] : Set the number of copies to print for the
current picture only.
00 PRINTS
[ALL PICS] : Set the number of copies to print for each
EXIT:SH1
picture, excluding movie clips and voice
MOVE PIC:
SET:OK
recordings.
5. Use the UP and DOWN buttons to select the number
copies and then press the OK button.
- The DPOF icon (
) will appear by the pictures for which the number of copies to print
is set.
53
Downloaded from www.Manualslib.com manuals search engine
DPOF : INDEX
Images (except for movie clips and voice file) are printed as index type.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD YES
3. Select the [INDEX] menu by pressing the UP/ DOWN
INDEX
NO
CANCEL
button and press the RIGHT button.
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [NO] is selected : Cancel the index print setting.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF : CANCEL
You can cancel the [STANDARD], [INDEX] settings.
Cancel the setting to reset the value to its default.
1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD
INDEX
STANDARD
3. Select the [CANCEL] menu by pressing the UP/ DOWN
CANCEL
INDEX
button and press the RIGHT button.
BACK:
SET:OK
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected : Cancels the standard print setting.
If [INDEX] is selected
: Cancels the index print setting.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
54
Downloaded from www.Manualslib.com manuals search engine
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Secondary menu
RESET
-
SERIES
-
FILE
PWR OFF
Page
p.56
p.57
CANCEL, 1~3~10MIN
ENGLISH
ESPAÑOL
ITALIANO
p.58
LANGUAGE
FRANÇAIS
DEUTSCH
NO
-
YES
-
04/05/01 13:00
-
Y/M/D
-
M/D/Y
-
D/M/Y
-
OFF
-
DATE
-
p.58
FORMAT
DATE
IMPRINT
p.59 ~ 60
p.59 ~ 60
D&TIME
OFF
LOW
SOUND
p.60
MEDIUM
HIGH
DARK
LCD
NORMAL
p.60
BRIGHT
NO
RESET
p.61
YES
55
Downloaded from www.Manualslib.com manuals search engine
Setup menu
Menu tab
Main menu
Sub menu
Secondary menu
Page
ON
LAMP
p.61
OFF
NTSC
p.62
VIDEO
PAL
Q.VIEW
OFF, 1 ~ 3 SEC
p.63
File name
This function allows the user to select the file naming format.
Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
AUTO
menu tab.
SET UP
3. Select the [FILE] menu by pressing the UP/ DOWN button
FILE
RESET
and press the RIGHT button.
PWR OFF
SERIES
4. Select a desired sub menu by pressing the UP/ DOWN
LANGUAGE
BACK:
SET:OK
button and press the OK button.
[RESET] : After using the reset function, the next file name
will be set from 0001 even after formatting, deleting all or inserting a new
memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
5. Press the menu button twice and the menu will disappear.
INFORMATION
The first stored folder name is 100SSCAM, and the first file name is SCD40001.
File names are assigned sequentially from SCD40001 SCD40002 ~ SCD49999.
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM
101SSCAM
~
999SSCAM.
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
56
Downloaded from www.Manualslib.com manuals search engine
Auto power off
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
Setting Power Off
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [PWR OFF] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. A menu will be displayed on the LCD monitor as shown
alongside.
Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [CANCEL] :
The power off function will not operate.
Selecting [1 ~ 10 MIN] :
The power will turn off automatically if not used for the
period of time specified.
5. Press the menu button twice and the menu will
disappear.
AUTO
SET UP
FILE
PWR OFF
LANGUAGE
BACK:
CANCEL
SET:OK
AUTO
SET UP
FILE
PWR OFF
LANGUAGE
BACK:
3 MIN
SET:OK
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off setting
will be preserved.
Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
57
Downloaded from www.Manualslib.com manuals search engine
Language
There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or
AC adapter are removed and inserted again, the language setting will be preserved.
Setting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
AUTO
menu tab.
SET UP
3. Select the [LANGUAGE] menu by pressing the UP/
FILE
PWR OFF
DOWN button and press the RIGHT button.
LANGUAGE
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
LANGUAGE sub menu : Korean, English, French,
German, Italian, Spanish, S.Chinese, T.Chinese
5. Press the menu button twice and the menu will disappear.
Formatting a memory card
This is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
If the memory card is not inserted, the internal memory will be formatted.
Formatting a Memory Card
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
AUTO
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
menu tab.
PWR OFF
3. Select the [FORMAT] menu by pressing the UP/ DOWN
NO
LANGUAGE
button and press the RIGHT button.
YES
FORMAT
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
If [YES] is selected : A [PLEASE WAIT!] message appears and the memory card will be
formatted. If you ran FORMAT in Play mode, a [NO IMAGE!]
message will appear.
INFORMATION
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can’t recognize or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a [CARD
ERROR!] message.
58
Downloaded from www.Manualslib.com manuals search engine
Setting up the Date/ Time/ Date type
You can change the date and time that will be displayed on the captured images and set up
the date type.
Setting Date/Time & Selecting Date type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
AUTO
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
menu tab.
LANGUAGE
04.05.01 08:17
3. Select the [DATE] menu by pressing the UP/ DOWN
FORMAT
Y/M/D
button and press the RIGHT button.
DATE
BACK:
SET:OK
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK
button.
AUTO
RIGHT button : Selects the
SET UP
year/month/day/hour/minute/date type.
LANGUAGE
04.01.01 08:17
LEFT button
: Moves the cursor to the [DATE] main
FORMAT
Y/M/D
menu if the cursor is at the first item of
DATE
the date and time setup. In all other
BACK:
SET:OK
cases, the cursor will be shifted to the
left of its current position.
UP and DOWN buttons: Changes the setting value.
- Date type
[Y/M/D] : year/month/day
[M/D/Y] : month/day/year
[D/M/Y] : day/month/year
5. Press the menu button twice and the menu will disappear.
Imprinting the recording date
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
AUTO
SET UP
FORMAT
DATE
IMPRINT
BACK:
OFF
DATE
D&TIME
SET:OK
[OFF]
: The DATE & TIME will not be imprinted on the image file.
[DATE]
: Only the DATE will be imprinted on the image file.
[D&TIME]
: The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
59
Downloaded from www.Manualslib.com manuals search engine
Imprinting the recording date
INFORMATION
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24
hour clock.
The imprint function is applied only to still images.
Sound
If a sound option other than [OFF] is selected, the camera activity can be monitored with
sounds including a start up sound and a shutter sound.
Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [SOUND] sub menu : OFF/LOW/MEDIUM/HIGH
5. Press the menu button twice and the menu will disappear.
AUTO
SET UP
DATE
IMPRINT
SOUND
BACK:
MEDIUM
SET:OK
LCD brightness
You can adjust the LCD brightness.
Adjusting LCD brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [LCD] sub menu : DARK/NORMAL/BRIGHT
5. Press the menu button twice and the menu will disappear.
60
Downloaded from www.Manualslib.com manuals search engine
AUTO
SET UP
IMPRINT
SOUND
LCD
BACK:
DARK
NORMAL
BRIGHT
SET:OK
Initialization(RESET ALL)
All camera menu and function settings will be restored to their default values. However,
values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
Initializing the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
AUTO
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
menu tab.
SOUND
3. Select the [RESET] menu by pressing the UP/ DOWN
NO
LCD
button and press the RIGHT button.
YES
RESET
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
If [NO] is selected : Settings will not be restored to their defaults.
If [YES] is selected : All settings will be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
Function lamp
You can turn on and off the function lamp located on the front of the camera.
Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : The function lamp will not light up.
If [ON] is selected : The function lamp will light up.
5. Press the menu button twice and the menu will disappear.
AUTO
SET UP
LCD
RESET
LAMP
BACK:
ON
OFF
SET:OK
Description of the Function lamp
Function
During power-on
Description
The function lamp is on during initialization.
When the camera is ready for operation, the lamp is turned off.
After an image is captured
The function lamp blinks once.
During voice recording
The function lamp (Blue) blinks repeatedly.
When the self-timer activated
The function lamp (Blue) blinks.
61
Downloaded from www.Manualslib.com manuals search engine
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [VIDEO] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [VIDEO] sub menu : NTSC, PAL
5. Press the menu button twice and the menu will disappear.
AUTO
SET UP
RESET
LAMP
VIDEO
BACK:
NTSC
PAL
SET:OK
Connecting to an external monitor
In RECORDING/ PLAY mode, you can
view the stored still images or movie clips
by connecting the camera to an external
monitor via the A/V cable. When the
camera is connected to an external
monitor, the LCD monitor will be turned
off automatically.
Yellow color-Video
White color-Voice
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
62
Downloaded from www.Manualslib.com manuals search engine
Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
AUTO
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
menu tab.
LAMP
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
VIDEO
OFF
button and press the RIGHT button.
Q.VIEW
4. Select a desired sub menu by pressing the UP/ DOWN
BACK:
SET:OK
button and press the OK button.
[OFF]
: The quick view function can’t be activated.
[1 ~ 3 SEC]
: The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
63
Downloaded from www.Manualslib.com manuals search engine
Setting up the MYCAM menu
You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MYCAM menu. The items
indicated by
are default settings.
Menu tab
Main menu
Sub menu
OFF
S.IMAGE
S.SOUND
SH.SOUND
Page
IMAGE 1
p.64
IMAGE 2
OFF
SOUND 1
SOUND 2
SOUND 3
OFF
SOUND 1
SOUND 2
SOUND 3
p.65
p.65
Start up image
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
64
Downloaded from www.Manualslib.com manuals search engine
AUTO
2272
MYCAM
S.IMAGE
S.SOUND
SH.SOUND
BACK:
SET:OK
Start up sound
You can select the sound that is activated whenever the camera is turned on.
Setting the Startup Sound
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will
disappear.
AUTO 2272
MYCAM
S.IMAGE
S.SOUND
SH.SOUND
BACK:
SOUND 1
SET:OK
Shutter sound
You can select the shutter sound.
Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will
disappear.
AUTO 2272
MYCAM
S.IMAGE
S.SOUND
SH.SOUND
BACK:
SOUND 1
SET:OK
65
Downloaded from www.Manualslib.com manuals search engine
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components.
Do not use or store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as
insecticides, for an extended period of time.
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur. It is a good
idea to remove the batteries and the memory card if you do not intend using the camera for
an extended period of time.
66
Downloaded from www.Manualslib.com manuals search engine
Important notes
If the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
67
Downloaded from www.Manualslib.com manuals search engine
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator
CARD FULL !
Causes
There is insufficient memory capacity to
Insert a new CARD or delete stored
take an image.
images to free up some memory.
LOW LIGHT !
When taking pictures in dark places.
CARD
The memory card is locked.
LOCKED !
NO IMAGE !
Remedy
Use a tripod and take pictures in Flash
Photography mode.
Slide the write protect switch to the
bottom of the memory card.
There are no images stored on the
Take images.
internal memory or the CARD.
Insert a memory card that is holding
some images
CARD
ERROR!
MEMORY
Memory card error
Insert a new card or format the memory.
Internal memory error
Format the memory with the memory
ERROR!
A battery
indicator blinks!
card removed.
There is low battery capacity
Insert fresh batteries
The flash mode is set to flash off
Disengage the FLASH OFF mode
Camera shake
(For ordinary shots)
warning
Use a tripod (For taking shots in more
indicator!
unusual circumstances ; museum, art
center)
68
Downloaded from www.Manualslib.com manuals search engine
Before contacting a service center
Please check the following
Symptom
Causes
Remedy
The camera
- There is low battery capacity
- Insert fresh batteries
doesn’t switch on
- An AC Power Adapter is not connected
- Connect an AC Power Adapter
The camera
- The batteries are exhausted
- Insert fresh batteries
power ceases
- The Camera is turned off automatically.
- Push the power button to reactivate camera
whilst in use
- The Adapter plug is not connected securely
- Remove and re-insert the plug
- The Camera is being used in low
- Keep the camera in warm conditions (i.e.
Batteries drain
quickly
temperatures
in order to take images
- There is insufficient memory capacity
Camera does
not take
images when
pressing the
Shutter button
inside a coat or jacket) and only remove it
- After turning the camera off, insert a new
memory card or delete unnecessary image files.
- The memory card has not been formatted
- Format the memory card.
- The memory card is exhausted
- Insert a new memory card
- The camera’s power is off
- Turn the camera power on
- The batteries are exhausted
- Insert fresh batteries
- The memory card is locked
- Slide the write protect switch to the
bottom of the memory card
- A picture was taken within 0.6m from the
The images
are unclear
The flash does
not fire
Incorrect date
and time is
displayed
- If the subject is closer than 0.6m, select
subject without setting an appropriate
macro shot mode or increase the
macro mode
camera to subject distance
- Taking a picture beyond the flash range
- Take a picture within the flash range
- The lens is smudged or dirty
- Clean the lens
- FLASH OFF mode has been selected.
- Disengage FLASH OFF mode
- The date and time have been set
- Reset the date and time correctly.
incorrectly.
(p.59 ~ 60 )
69
Downloaded from www.Manualslib.com manuals search engine
Before contacting a service center
Symptom
The camera
buttons do not
operate
Causes
Camera malfunction
Remedy
Remove / re-insert batteries and switch
camera on
A card error has
occurred while
the memory card
is in the camera.
Incorrect memory card format
Re-format the memory card (p.58 )
Colour of image
is different to the
original scene
White balance setting is incorrect.
Select appropriate White balance.
Exposure is excessive.
Reset exposure compensation.
The play back
display is not
very clear
The lens or LCD monitor is smudged or dirty
Clean the lens or LCD
Date is not
displayed on the
LCD monitor in
the PLAY mode
Date imprint function is set to OFF
Switch the Date imprint function ON.
Cable connection is incorrect.
Check the connection.
The camera is off.
Turn the camera on.
There are no batteries, the batteries are
Insert new batteries or check the
exhausted or the AC adapter is not
adapter connection.
Images are too
bright
When using the
PC’s explorer,
the [Removable
Disk] file does
not show
connected.
The operating system is not Windows
Install Windows 98, 98SE, 2000, ME,
98, 98SE, 2000, ME, XP/ Mac OS
XP/ Mac OS 9.0~10.2 to PC that
9.0~10.2. Alternatively the PC does not
supports USB.
support USB.
The USB driver is not installed.
Install a [USB Storage Driver].
The images
Incorrect file name.
Do not change the image file name.
don’t play back.
(Violation of DCF format)
70
Downloaded from www.Manualslib.com manuals search engine
Specification
Image
Sensor
Type
1/2.5" CCD
Effective Pixels
Approx. 4.0 Mega –pixel
Total Pixels
Approx. 4.2 Mega –pixel
Focal lens
Lens
F No.
Digital Zoom
Viewfinder
Flash
F.3.2
Still Image mode: 1.0X~ 4.0X,
Play mode: 1.0X~8.0X
Optical virtual image viewfinder
LCD Monitor
1.5" color TFT LCD
Type
TTL Auto Focus
Range
Exposure
(35mm film equivalent : 35mm)
Optical Viewfinder
Focusing
Shutter
SHD Lens f=5. 8mm
Normal: 60cm ~ infinity,
Macro: 6cm ~ 60cm
Type
Mechanical and Electronic shutter
Speed
Normal Mode: 4~ 1/2,000 sec.(Night Scene: 8~1/2,000 sec.)
Control
Program AE
Compensation
Metering (Multi. & Spot)
2.0EV (0.5EV steps)
ISO Equivalent
Auto, 100, 200, 400
Modes
Auto, Auto & Red - eye reduction, Slow sync, Fill-in flash, Flash off
Range
0.2 ~ 2m
Recharging Time Approx. 5 sec.
Sharpness
Soft, Normal, Vivid
Effect
Normal, B&W, Sepia
Voice Recording (max 1 hour)
Voice Recording
Voice Memo on Still Image (max 10 sec.)
Date Imprinting
Date, Date & Time, Off (user selectable)
White Balance
Auto / Daylight /Cloudy/ Sunset / Fluorescent / Tungsten
Still Image
Shooting
Movie Clip
Self-timer (Single, Double)
Modes: Auto, Night, Myset, Text mode
Shooting: Single, Continuous, AEB
With audio (Recording time: memory capacity dependent)
Size: 320x240, 640x480
10 sec, 2sec, Double self
71
Downloaded from www.Manualslib.com manuals search engine
Specification
Media
File Format
Image Size
Internal memory: 32MB flash memory
External memory (optional):MS Duo (Upto128MB guaranteed)
Still Image: JPEG (DCF), DPOF, EXIF
Movie Clip: AVI (MJPEG) Audio : WAV
2272: 2272X1704,
2048: 2048X1536,
1600: 1600X1200,
1024: 1024X768,
640: 640X480
2272 : Super fine 14, Fine 28, Normal 43
Storage
2048 : Super fine 16, Fine 35, Normal 53
1600 : Super fine 29, Fine 58, Normal 80
Capacity
(32MB
Internal Memory)
1024 : Super fine 67, Fine 142, Normal 165
640
: Super fine 159, Fine 306, Normal 360
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Image Play
Single image / Thumbnails / Slide show/ Movie Clip
Image Edit
Trimming, Resizing
Digital output connector : USB,
Audio : Mono
Interface
Video output : NTSC, PAL(user selectable)
DC power input connector : 5.0V
Primary battery : CP1
Rechargeable battery : Self Charging System,
Power Source
SLB-1037(1,000mAh, 3.7V)
AC Adapter : SAC-51(5.0V,2.0A)
Included battery source may vary depending on sales region.
Dimensions (WxHxD)
97 x 60 x 15.4mm
Weight
Approx. 90g(without batteries and card)
Software
Camera Driver
Storage Driver (Windows98//98SE/2000/ME/XP, Mac OS 9.0~10.2)
Application
Digimax Viewer 2.1, Arcsoft PhotoImpression 4.0, Digimax Reader
Specifications are subject to change without prior notice.
72
Downloaded from www.Manualslib.com manuals search engine
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by inappropriate
use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is
not covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows
PC with processor better than MMX
For Macintosh
Power Mac G3 or later
Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Mac OS 9.0 ~ 10.2
Minimum 32MB RAM (XP : 128MB)
Minimum 64MB RAM
140MB of available hard-disk space
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
800x600 pixels, 16-bit colour display
QuickTime 4.0 or later for Movie Clip
compatible monitor (24-bit color display
recommended)
73
Downloaded from www.Manualslib.com manuals search engine
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.0 ~ 10.2.
Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
INFORMATION
Be sure to check the system requirements (page 73) before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
74
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done, the
stored images in the camera can be moved to the PC and can be edited by an image editing
program.
INFORMATION
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The Digimax U-CA 401 camera driver is
installed automatically.
[Click!]
2. Camera driver installation is complete.
Click the [Finish] button.
[Click!]
75
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
3. A window for which you can select application
software will be displayed. Select the
application program and click the [Install]
button.
Refer to page.74 for more information about
the application program.
[Click!]
INFORMATION
If you select [Exit] at the step 3, the application program installation will be cancelled.
4. Install Digimax Viewer.
Click [Next >] button.
[Click!]
INFORMATION
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
5. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be canceled.
[Click!]
6. A destination selection window will open. Click
[Next >]. To copy to the files to another folder,
click [Browse ..] and choose a folder you
want.
[Click!]
76
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
7. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression.The system will not reboot
even the [Yes, I want to restart the computer
now] option is selected.
*The frame 8 may not appear according to the [Click!]
system requirements.
9. Digimax Viewer Installation is completed.
The PhotoImpression installation window will
be displayed as shown alongside.
Click the [OK] button.
[Click!]
INFORMATION
If you click [Cancel] in Step 9, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
10. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
77
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
11. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be canceled.
[Click!]
12. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
[Click!]
13. The [Select Components] window will appear.
Click [Next >] button.
[Click!]
14. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
15. Installation is complete.
Click the [Finish] button.
* The frame 15 may not appear according to
the system requirements.
[Click!]
78
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
16. To apply changes, you must restart the
computer. Select [Yes, I want to restart my
computer now], and then click [OK].
[Click!]
17. After restarting the computer, connect the PC to the camera with the USB cable.
18. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open.
If the image viewer program opens, the camera
driver was setup successfully.
19. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful.
Now you can transfer image files from the
camera to PC via the USB cable.
79
Downloaded from www.Manualslib.com manuals search engine
Setting up the application software
INFORMATION
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify the [USB
Driver] folder on the supplied software CD.
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.84), and re-install the driver.
2. Refer to FAQ (p.90) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
80
Downloaded from www.Manualslib.com manuals search engine
Starting PC Mode
If you insert the USB cable into the USB connection terminal, the camera mode will change to
the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The auto focus lamp will blink when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera via the USB cable.
- Connect the small end of the USB cable to the USB port on the camera.
- Connect the large end of the USB cable to the USB port on the computer.
- Make sure the connectors are fully inserted.
Disconnecting the camera and PC
Refer to the following page.
- WIN 98SE
: p.86
- WIN 2000/ ME/ XP : p.86 ~ 87
INFORMATION
The camera driver must be installed before using PC mode. For driver installation
instructions, please refer to p.75.
To save battery power, it is recommended that you use an AC adapter (Optional) when
connecting the camera to a computer.
81
Downloaded from www.Manualslib.com manuals search engine
Starting PC Mode
Downloading stored images
You can download the still images stored on the camera to your PC's hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable Disk
DCIM 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
82
Downloaded from www.Manualslib.com manuals search engine
Starting PC Mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
83
Downloaded from www.Manualslib.com manuals search engine
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start
Settings] and click [Control Panel].
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window
will open. Click [Digimax U-CA 401] and click the
[Add/Remove] button.
[Click !]
4. Uninstallation is complete.
Click the [Finish] button and the window will
disappear.
[Click !]
84
Downloaded from www.Manualslib.com manuals search engine
Removable Disk
To use this camera as a Removable Disk, install (p.75) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM
PC.
100SSCAM) can be transferred to the
INFORMATION
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing
is displayed in THUMBNAIL mode.
The auto focus lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until the
lamp stops blinking. To remove the USB cable in
Windows 2000/ME/XP, use the [Unplug or Eject
Hardware] icon on the task bar.
85
Downloaded from www.Manualslib.com manuals search engine
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage
Device] and click the [Stop] button.
[Click!]
4. The [Stop a Hardware device] window will
open. Select the [SAMSUNG Digimax U-CA
401 USB Device] and click the [OK] button.
[Click!]
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Click!]
86
Downloaded from www.Manualslib.com manuals search engine
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
7. Unplug the USB cable.
[Click!]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 9.0 ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
INFORMATION
For Mac OS 10.0 or later: First complete uploading from computer to camera and then
remove the removable disk with the Extract command
87
Downloaded from www.Manualslib.com manuals search engine
Digimax Viewer 2.1
This software is only compatible with Windows.
1. To open Digimax Viewer, click the [Start Programs
Samsung Digimax Viewer 2.1 Digimax Viewer
2.1 ] and Digimax Viewer 2.1 will then open.
2. If the [Auto Launch] option is selected, this program will be executed automatically with
recognizing the camera.
3. You can easily use the Digimax viewer 2.1 program
as it offers a FILE menu and TOOL bar. And, you can
use the pop up menu. Click an image and press the
right mouse button.
Digimax Viewer functions are listed below.
- Basic functions
: Copy, Cut, Paste, Delete, Rotate, Rename, changing file type, Resize,
Property.
- Advanced functions : Print, Slide show, Export, Sending e-mail, On-line print, Web album etc.
INFORMATION
Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
Refer to the [Help] menu in Digimax viewer 2.1 for further information.
88
Downloaded from www.Manualslib.com manuals search engine
Using PhotoImpression
With PhotoImpression, you can edit or store still images that you downloaded from the camera.
This software is only available in Windows version.
To start the program, click [Start Programs ArcSoft PhotoImpression PhotoImpression].
The following screen will appear.
[ Help Button ]
[ Command
Button ]
[ Tool Bar ]
You can use PhotoImpression to perform the following tasks.
Command Button
Button
Description
Imports a picture from an album, a source folder, or the camera/scanner, or captures
screen shots of what is being viewed on the current monitor.
Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, Insert Effects, or Layer.
Performs Insert Frame, Insert Borders, Insert Calendar, Insert Greeting Cards, Insert
Template, or Connect with Other Software.
Saves the edited picture, and sends an e-mail or uses it as the background image.
Outputs the edited picture according to your preferences.
89
Downloaded from www.Manualslib.com manuals search engine
Using PhotoImpression
Tool Bar
Button
Description
Button
Description
Resize Layer
Rotate Layer
Flip Layer Horizontally
Rotate All Layers
Undo
Redo
Copy
Paste
Delete Layer
Close Picture
INFORMATION
For detailed instruction on how to use PhotoImpression, please refer to the program's Help.
FAQ
Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
Turn the camera power on. We recommend using an AC power adapter in PC
mode.
[Case 2]
USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to page 75.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
Use a USB cable with the correct specification.
90
Downloaded from www.Manualslib.com manuals search engine
FAQ
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
[Case 5]
There is an unexpected error during file transfer
Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
Check the USB port in your computer or keyboard.
Check the OS version.
A USB Interface is available in Windows 98, 98SE, 2000, ME, XP.
Check [Universal Serial Bus controllers] in Device Manager.
Do the following to check [Universal Serial Bus controllers].
Win 98/ME
: Trace [Start Settings Control Panel System
Device Manager
Universal Serial Bus controllers]
Win 2000
: Trace [Start Settings Control Panel System Hardware
Device Manager Universal Serial Bus controllers].
Win XP
: Trace [Start Control Panel Performance and
Maintenance System Hardware Device Manager
Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB
Root Hub to check if the Device Status states "This device is working properly".
If the Device Status says the device is "not working properly", click the "Driver"
tab and then click [Update Driver] or [Reinstall Driver].
When all the conditions mentioned above are met, the computer can support
the USB interface.
[Case 7]
When using the USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible.
Wherever possible, connect the camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.
91
Downloaded from www.Manualslib.com manuals search engine
FAQ
[Case 9]
When I open the Device Manager (by clicking Start (Settings) Control
Panel (Performance and Maintenance) System (Hardware) Device
Manager), there are Unknown Devices or Other Devices entries with a
yellow question mark(?) beside them or devices with an exclamation mark(!)
beside them.
Right-click on the entry with the question(?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC, and then
reinstall the camera driver.
Double-click on the entry with the question(?) or exclamation(!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location where the appropriate driver for the device is,
specify the "USB Driver" folder (where D: is the drive letter of the CD-ROM
where the driver CD is inserted).
Please check the following if the movie clip doesn't play back.
If you installed an incorrect codec onto your PC, the movie clip may not play back on the PC.
1. Check whether the JPEG Decoder provided with the camera is installed.
If you didn't install the camera driver, please install the JPEGCODE included in the
application S/W CD-ROM. If not, the movie clip may not play back on the PC.
[ Installing the JPEG Decorder ]
1) Insert the CD provided with the camera.
2) Run the windows explorer and select the CD-ROM drive.
3) Select the JPEG_Decoder folder and double click the Setup.exe file.
The codec will be installed.
2. Compatible problems with the codecs installed onto the PC.
If the movie clip doesn't play back after installing the JPEG Decorder, refer to the
following.
92
Downloaded from www.Manualslib.com manuals search engine
FAQ
1) When the movie clip plays back, only the sound plays back without the image.
It isn't compatible with the Mogen MJPEG Decorder. Uninstall the Mogen MJPEG
Decorder as following order. Click [Start Run] and a window will open.
Type "regsvr32 /u m3jpgdec.ax" and press the Enter key.
2) When the movie clip plays back, the blue and red colors are reversed or the movie clip
doesn't open. It isn't compatible with the ffdshow Codec or K-lite Codec Pack.
Disable the ffdshow program.
Trace [Start Programs ffdshow
Disable ffdshow].
Uninstall the K-Lite Codec Pack or set the default
program of the AVI file as the Windows Media
Player.
Trace [Start controller panel Add/ Remove
Programs Select the K-Lite Codec Pack
Click the Change/ Remove button].
Run the windows explorer Select AVI file
Click the right mouse button Select the "Open
with" menu Click the Windows Media Player
Check the "Always use this program to open these
files" option Click the [OK] button.
Most problems will be solved with those remedies. If the movie clip doesn't play back
continuously, install the JPEGCODE provided with the camera again.
For more information, visit the samsung website(www.samsungcamera.com) and see the
FAQ page.
93
Downloaded from www.Manualslib.com manuals search engine
MEMO
94
Downloaded from www.Manualslib.com manuals search engine
MEMO
95
Downloaded from www.Manualslib.com manuals search engine
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : +44 (0) 1932 455300
FAX : +44 (0) 1932 455325
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
FAX : (49) 6196 66 53 66
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2282/5
FAX : (33) 1-4320-4510
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
Downloaded from www.Manualslib.com manuals search engine
6806-1904
Download PDF