Designer Systems Wired Controller for the Denon

.co.uk
Designer
Systems
Bespoke Electronic Design & Manufacturing in the UK
Wired ®Controller for the
Denon V300 player
Technical Data
DVD-DWRC(+) controller
Firmware revision 1.00
•
•
•
•
•
•
•
Designed for Point-of-Sale,
training / educational, museums and presentation applications
Ultra low power consumption
Simple connection to Denon®
V300 player serial port
Assign 32 sets of functions to
the seven buttons with internal DIP switch
Plug and Play
Water resistant polycarbonate membrane with under
surface tactile buttons (buttons and membrane replaceable)
Upgradeable with Passive
Infrared sensor to allow pedestrian activation of presentation
Description
The DVD-DWRC unit permits the
control of DVD, CD Audio or
VCD media on a Denon® V300
player.
Designed for Point-of-Sale, training / educational, museums and
presentation applications the unit
provides simple control of the media with seven (7) configurable
buttons. These buttons may be
configured with an internal switch
to one of thirty two (32) button
sets to fit the desired application
and provide authoring flexibility.
The housing is ergonomically designed to fit comfortably in the
hand or be surface mounted using
the integrated key-hole slots in the
base. The polycarbonate button
membrane is water resistant (ie.
inadvertent coffee, tea or soft
drink spills) and operates the under surface buttons which are fully
replaceable.
The DVD-DWRC also features an
internal socket for a user upgradeable Passive Infrared sensor.
Already fitted on DVD-DWRC+.
This sensor allows the inserted
media to be activated, played, by a
passer-by (pedestrian) when used
within a kiosk environment where,
for example, a DVD player system
is used to provide Point-of-Sale
(POS) advertising.
Applications
The DVD-DWRC is designed
for Point-of-Sale, training /
educational, museums and
presentation applications.
Custom designed labels and firmware are
available for this product, please contact
your distributor*.
Selection Guide
Description
Wired controller
Wired controller with PIR fitted
Distributed by :
Kingsbridge House, Padbury Oaks
575-583 Bath Road, Longford
Middlesex UB7 0EH
United Kingdom
Part Number
DVD-DWRC
DVD-DWRC+
Page 1 of 4 V1.00
Tel: +44 1753 680023
Fax: +44 1753 686020
Email: sales@dm-pro.eu
DVD ACCESSORIES
Features
DVD-DWRC interface
Power requirements
The DVD-DWRC is powered from
the serial port RTS line of the connected DVD player. The maximum
current draw is 6mA.
[PC,RC,nn]\r
Function
DB9 Male
RTS
8
RXD
3
TXD
2
Ground
5
All other connection are N/C
DVD-DWRC interface
The DVD-DWRC interface connection is a standard DB9 male as
specified within the V300 player
specification.
Serial communication protocol is
9600 Baud, 1 Start bit, 8 Data bits, 1
Stop bits, No parity for all control
commands. All I/O is RS232 and
TTL compatible.
Where nn is a remote control code
for the assigned button.
DVD-DWRC function
Upon player power-up the DVDDWRC awaits a button press upon
which the assigned RC code is sent
to the player.
DVD control protocol
The DVD-DWRC communicates
with each player using the player
control protocol. This protocol takes
the form of ASCII command strings
of format:
Custom button sets may be assigned
using the internal DIP switch, see
‘Installation’ on the next page.
Table 1.0 (Custom button settings)
Dipswitch
0=OFF 1=ON
2
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 7
PIR
(optional)
5
4
3
1
Standard
0
0
0
0
0
Left
Up
Right
Down
Go
Menu
Play
Play
Option 2
0
0
0
0
1
Left
Up
Right
Down
Go
Menu
Audio
Play
Option 3
0
0
0
1
0
Left
Up
Right
Down
Go
Menu
Subtitle
Play
Option 4
0
0
0
1
1
Left
Up
Right
Down
Go
Audio
Subtitle
Play
Option 5
0
0
1
0
0
Left
Up
Right
Down
Go
Menu
Return
Play
Play
Option 6
0
0
1
0
1
Left
Up
Right
Down
Go
Skip-
Skip+
Option 7
0
0
1
1
0
Left
Up
Right
Down
Go
Search-
Search+
Play
Option 8
0
0
1
1
1
Left
Up
Right
Down
Go
Menu
Pause
Play
Option 9
0
1
0
0
0
Left
Up
Right
Down
Go
Down
Go
Play
Option 10
0
1
0
0
1
Left
Up
Right
Down
Go
Audio
Angle
Play
Option 11
0
1
0
1
0
Left
Up
Right
Down
Go
Subtitle
Angle
Play
Option 12
0
1
0
1
1
Left
Up
Right
Down
Go
Angle
Pause
Play
Option 13
0
1
1
0
0
Left
Up
Right
Down
Play
No op.
No op.
Play
Option 14
0
1
1
0
1
Left
Up
Right
Down
Play
Menu
Angle
Play
Option 15
0
1
1
1
0
Left
Up
Right
Down
Play
Skip-
Skip+
Play
Option 16
0
1
1
1
1
2
1
4
5
3
Menu
Play
Play
Option 17
1
0
0
0
0
Skip-
1
Skip+
3
2
Menu
Play
Play
Option 18
1
0
0
0
1
1
Skip+
3
Skip-
2
Menu
Play
Play
Option 19
1
0
0
1
0
2
1
3
4
No op.
Menu
Play
Play
Option 20
1
0
0
1
1
1
2
4
3
Play
Menu
Pause
Play
Option 21
1
0
1
0
0
2
1
3
4
Play
Menu
Pause
Play
Option 22
1
0
1
0
1
1
2
3
4
Go
Menu
Pause
Play
Option 23
1
0
1
1
0
4
1
2
3
Go
Menu
Pause
Play
Option 24
1
0
1
1
1
Left
Up
Right
Down
Go
Menu
No op.
Play
Option 25
1
1
0
0
0
2
2
4
5
3
Skip-
Skip+
Play
Option 26
1
1
0
0
1
Search-
Up
Search+
Down
Go
Menu
Pause
Play
Option 27
1
1
0
1
0
Search-
Up
Search+
Down
Pause
Menu
Go
Play
Option 28
1
1
0
1
1
Skip-
Up
Skip+
Down
Pause
Menu
Go
Play
Option 29
1
1
1
0
0
Search-
1
Search+
3
2
Menu
Pause
Play
Option 30
1
1
1
0
1
Skip-
Angle
Skip+
Down
Go
Menu
Pause
Play
Option 31
1
1
1
1
0
1
2
4
3
Pause
Menu
Return
Play
Option 32
1
1
1
1
1
Skip-
Up
Skip+
Down
Go
Menu
Return
Play
Distributed by :
Kingsbridge House, Padbury Oaks
575-583 Bath Road, Longford
Middlesex UB7 0EH
United Kingdom
Page 2 of 4 V1.00
Tel: +44 1753 680023
Fax: +44 1753 686020
Email: sales@dm-pro.eu
Installation
1.
2.
3.
4.
The controller may be hand-held or surface mounted to a panel. Four M3 x 20mm stainless steel screws are
supplied to replace the screws in the base of the DVD-DWRC when mounting to a panel of 1 to 5mm thick.
If button function other than the standard UP, DOWN, LEFT, RIGHT, GO, MENU & PLAY is required then
remove the four (4) screws in the base of the controller, lift off the top cover and set the DIP switch (SW8 Option Select) to the option setting in Table 1.0 on the previous page.
Ensuring that power to the Denon V300 player is switched OFF insert the lead from the controller into the serial connector on the rear of the Denon V300 player and secure with the integral screw-locks.
Switch ON the Denon V300 player and test by pressing each of the buttons.
PIR installation (Not required on the DVD-DWRC+)
1.
2.
3.
4.
The DVD-DWRC controller may be optionally fitted with a Passive Infrared (PIR) motion sensor to allow the
DVD presentation to be controlled when a passer-by (pedestrian) is detected.
To install the sensor remove the four (4) screws in the base of the controller, lift off the top cover, locate the
three (3) way socket marked ‘SN1’ and without touching the pins of the sensor, which could cause static damage, insert it into the socket.
With a sharp modelling knife remove the label covering the 10mm hole that mates with the sensor (TIP: Make
a cross-cut in the label from the inside of the top cover and then from the front remove the label material by
following the hole around using the knife tip in a punching motion).
Replace the front cover of the controller, with PIR tip protruding through hole, and re-secure with the four (4)
screws.
When the Denon V300 is now powered up, and after 30 seconds of stability time, the PIR will activate the button command setup on the Option Select switch (see Table 1.0) and then wait 10 seconds before re-enabling itself. If a button on
the controller is pressed at any time the 10 second timeout is re-started to prevent PIR activity from repeatedly sending
button presses.
Electrical Characteristics (TA = 25oC Typical)
Parameter
Supply Voltage (RTS)
Supply Current
RXData output high level
RXData output low level
Minimum
4.5
GND
2.4
Maximum
9
6
0.8
VCC
Units
V
mA
V
V
Minimum
-0.5
Maximum
+10
Units
V
Notes
Absolute Maximum Ratings
Parameter
Supply Voltage (RTS)
Environmental
Parameter
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
Immunity & emissions
Minimum
0
-10
0
Maximum
Units
o
70
C
o
80
C
80
%
See below
200g
EMC compliance to 89/336/EEC
WEEE Consumer Notice
This product is subject to Directive 2002/96/EC of the European Parliament and the Council of the European Union on Waste of Electrical and Electronic Equipment (WEEE) and, in jurisdictions adopting that
Directive, is marked as being put on the market after August 13, 2005, and should not be disposed of as
unsorted municipal/public waste. Please utilise your local WEEE collection facilities in the disposition and
otherwise observe all applicable requirements. For further information on the requirements regarding the disposition of
this product in other languages please visit www.designersystems.co.uk
Distributed by :
Kingsbridge House, Padbury Oaks
575-583 Bath Road, Longford
Middlesex UB7 0EH
United Kingdom
Page 3 of 4 V1.00
Tel: +44 1753 680023
Fax: +44 1753 686020
Email: sales@dm-pro.eu
Mechanical Specifications – Units millimetres (inches)
MENU
PLAY
74 (2.9)
2000 (79)
GO
179 (7)
Mounting hole detail (top view)
Four (4) M3x20mm screws are provided
26.0
D3.5mm x4
26.0
CENTRE
63.0
50.5
Declaration of Conformity
Copyright 1999-2006 by DESIGNER SYSTEMS Co.
Apparatus name / model number DVD-DWRC(+)
Manufacturer Designer Systems, 15 Andrew Place, Truro, Cornwall
Conformity via
Generic Standard EN50081-1
TR1 3HZ, United Kingdom
Generic Standard EN50082-1
Description of apparatus DVD control device
Conformity criteria For use only within commercial, residential and light industrial applications
We certify that the apparatus identified above conforms to the requirements of Council Directive 89/336/EEC & 73/23/EEC
Signed.
Date 1/10/99
Having made this declaration the CE mark is affixed to this product, its packaging, manual or warranty.
The information appearing in this Datasheet is believed to be accurate at the time of publication. However, Designer Systems assumes no responsibility arising from the use of the information supplied. The applications mentioned herein are used solely for the purpose of illustration and Designer Systems makes no warranty or representation that such applications will be
suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Designer Systems reserves
the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.designersystems.co.uk
Distributed by :
Kingsbridge House, Padbury Oaks
575-583 Bath Road, Longford
Middlesex UB7 0EH
United Kingdom
Page 4 of 4 V1.00
Tel: +44 1753 680023
Fax: +44 1753 686020
Email: sales@dm-pro.eu
Download PDF