8Ω Background Music Loudspeakers User Manual

8Ω Background
Music Loudspeakers
User Manual
Order codes:
BGS 25 - CRSP23 (White), CRSP24 (Black)
WPS 25 - CRSP35 (White), CRSP36 (Black)
BGS 35 - CRSP25 (White), CRSP26 (Black)
WPS 35 - CRSP37 (White), CRSP38 (Black)
BGS 50 - CRSP27 (White), CRSP28 (Black)
WPS 50 - CRSP39 (White), CRSP40 (Black)
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all the parts
are present.
• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• Retain the carton and all packaging materials.
• In the event that a fixture must be returned to the supplier, it is important that the fixture is returned in the original carton
and packaging.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modifications to this equipment are not subject to warranty.
CAUTION!
DANGER TO LIFE!
KEEP THIS EQUIPMENT
AWAY FROM MOISTURE,
RAIN AND LIQUIDS, AND
OUT OF DAMP/HUMID
ENVIRONMENTS
BEFORE OPERATING THE
SPEAKER FOR THE FIRST
TIME, THE INSTALLATION
HAS TO BE APPROVED
BY AN EXPORT
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modification to the equipment.
• Never leave any cables lying around.
• Do not use the unit near stoves, heaters, radiators, or other heat producing devices.
• Do not insert any objects into the air vents.
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Only use the equipment indoors (BGS series).
• Do not expose to flammable sources, liquids or gases.
• Do not use the incorrect cables or defective cables.
• Do not drive the inputs with a signal level higher than
required to drive the equipment to its full output
• Prevent distortion! Make sure that all components
connected to the speaker have sufficient power ratings.
Distortion will be generated if the components are
operated at their limits.
• The user is responsible for correct positioning and
operation of this fixture. The manufacturer will not accept
liability for damages caused by the misuse or incorrect
installation of this equipment.
• Repairs, servicing and power connection must only be carried out by a qualified technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• WARRANTY: One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
Incase of malfunction this device should be returned for service or inspection.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
www.cleveracoustics.co.uk
8Ω BGS & WPS Loudspeakers User Manual
2
Product overview & technical specifications
8Ω Background Music Loudspeakers
These background music loudspeakers feature ABS enclosures and sturdy metal grilles. Suitable for free standing or wall mounting via
adjustable pivot fixing bracket, allowing horizontal or vertical installation.
The trapezoidal design allows for the enclosures to be mounted neatly into
corners, making them ideal for multiple applications.
•2-way loudspeakers
•Complete with adjustable
mounting brackets
•Supplied in pairs
•Available in black and white
•Robust housing
•Suitable for insallation outside in sheltered conditions
(WPS series only)
•Polypropylene LF and Mylar HF
205mm (BGS 50 & WPS 50)
178mm (BGS 35 & WPS 35)
160mm (BGS 25 & WPS 25)
180mm (BGS 50 & WPS 50)
145mm (BGS 35 & WPS 35)
130mm (BGS 25 & WPS 25)
285mm (BGS 50 & WPS 50)
240mm (BGS 35T & WPS 35T)
210mm (BGS 25T & WPS 25T)
Specifications
BGS 25 & WPS 25
BGS 35 & WPS 35
BGS 50 & WPS 50
Impedance
8Ω
8Ω
8Ω
Power (RMS)
25W
35W
50W
Power (Max.)
50W
70W
100W
Sensitivity (1W/1m)
88dB
89dB
89dB
Maximum SPL (Rated W/1m)
95dB
98dB
98dB
Frequency response
70Hz-18kHz
60Hz-18kHz
55Hz-20kHz
Drivers
4” LF, 1” HF
5” LF, 1” HF
6.5” LF, 1” HF
Connections
2 x binding terminals
2 x binding terminals
2 x binding terminals
Dimensions
210 x 160 x 130mm
240 x 178 x 145mm
285 x 205 x 180mm
Weight
1.5kg (each)
2.2kg (each)
3.2kg (each)
IP rating
IP44 (WPS series only)
IP44 (WPS series only)
IP44 (WPS series only)
Order code
BGS 25
CRSP23 (white)
CRSP24 (black)
WPS 25T
CRSP35 (white)
CRSP36 (black)
BGS 35
CRSP25 (white)
CRSP26 (black)
WPS 35
CRSP37 (white)
CRSP38 (black)
BGS 50
CRSP27 (white) CRSP28 (black)
WPS 50
CRSP39 (white)
CRSP40 (black)
www.cleveracoustics.co.uk
8Ω BGS & WPS Loudspeakers User Manual
3
Technical specifications
Before attaching the loudspeaker, make sure that the supporting structure can hold a minimum safety factor of 10 times the installations weight. (eg 2.7kg - 27kg point load).
The durability of the installation depends very much on the material used at the installation area (building material), such as wood, concrete and brick etc. This is why the fixing material must be chosen to suit the wall material.
Always ask a specialist for the correct plug/screw combination indicating the maximum load and building material.
02
04
01
01
03
04
02
01 - Binding terminals
02 - Bracket adjustment knob
www.cleveracoustics.co.uk
03 - Bracket
04 - Wall mounting points (6mm fitting max)
In the box: 2 x loudspeakers,
2 x terminal covers
(WPS series only)
& 1 x user manual
8Ω BGS & WPS Loudspeakers User Manual
4
Installation instructions & setup
Important installation advice
8Ω examples:
•All loudspeakers have to be
connected to the constant voltage line and wired in parallel.
•The output power is adjustable using the switch provided on the rear of the speaker.
•You must NEVER mix 100V line and low impedance speakers on the same system.
•DO NOT run microphone cables near mains, data, telephone or 100V line cables.
•ENSURE that all loudspeakers are in-phase.
•ENSURE that there are no short
circuits on the loudspeaker line
before connection of the amplifier.
•Where it is intended to use multiple
low impedance speakers to cover an
area, the speakers must be wired in a series/parallel arrangement in such
a way as to present the correct load to the amplifier.
•Note: The total load impedance
presented to the amplifier must
never be below the rated amplifier
impedance, otherwise damage can result.
Standard 2 loudspeaker setup
Amplifier
8Ω
8Ω
+
_
4Ω
+
8Ω
_
4Ω combined load
8Ω
Amplifier
4Ω
8Ω
+
_
+
8Ω
_
8Ω
+
_
+
8Ω
_
4Ω combined load
www.cleveracoustics.co.uk
Parallel 4 loudspeaker setup
Series parallel 4 loudspeaker mono setup
+
8Ω
_
+
8Ω
_
+
8Ω
_
+
8Ω
_
+
Amplifier
8Ω
_
8Ω BGS & WPS Loudspeakers User Manual
5
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
www.cleveracoustics.co.uk
8Ω BGS & WPS Loudspeakers User Manual
6
Clever Acoustics Range
Public Address solutions from Clever Acoustics
Clever Acoustics wide range of 100V and low impedance products has been designed to offer the
installer a comprehensive audio solution. With options for both indoor and outdoor installations
the products provide cost effective solutions without compromise on quality or intelligibility.
Throughout the whole product portfolio the range has been designed to be installed with minimum fuss and simple touches including cut out templates for the ceiling loudspeaker ranges
or Quick-Fixx® fast fit installation brackets featured on the BGS-20T Series.
When designing the range of mixer amplifiers our engineers have taken into account that not all
amplifiers are tucked away in rack cabinets, with this in mind the MA Series Mixer Amplifiers
and SL Series Slave Amplifiers all feature heavy gauge brushed aluminium, black anodised front
panels, maximising quality and aesthetics.
The range includes:
Speakers
•Ceiling
•Column
•Background
•Horn
•Projector
•Pendant
•Wall Mount
Amplifiers
•Mixer
•Slave
•Compact
Accessories
•Paging microphones
•Volume controls
To view the full range of Clever Acoustic products and to keep up-to-date on our latest additions visit www.cleveracoustics.co.uk
www.cleveracoustics.co.uk
8Ω BGS & WPS Loudspeakers User Manual
7
www.cleveracoustics.co.uk
100V BGS & WPS Loudspeakers User Manual
8
Download PDF