Accessories Catalog SWEETS 2005

ww
s.
p
and
sca
land rectory
i
d
co
Lo
S
ET
E
SW200a5rchitect:t
e
a
m
for us
ok in
w. s w e
et
O p e n i n g a W h o l e N e w Wo r l d
Accessories Catalog
Swing Gate Operators
Slide Gate Operators
Barrier Gate Operators
Accessories
FAAC is the world’s largest specialized
manufacturer of gate operating equipment.
Table of Contents
Barrier Gate Accessories
3
Slide Gate Accessories
11
General Accessories
Battery Back-up Units
Entry Systems and Devices
Safety and Security Devices
Electrical & Hardware
Hinges
17
19
22
34
45
52
Warranty and Terms of Sale
53
2
Other accessories that work
with all types of FAAC operators,
such as safety devices, access
control systems, etc., are listed
in the General Accessories
Section, page 17.
To guarantee the safety and
efficiency of its equipment, FAAC
strongly recommends that qualified
personnel test the safety system
on an annual basis, as well as
maintain the overall hydraulic
or mechanical system.
Barrier Accessories
NOTE:
The following accessories are
specific to barrier operators only.
3
Barrier Gate Accessories
1. 620 Foundation Plate
4. 620/640 Emergency Bypass Solenoid
The plate measures 14 in. x 7.86 in., has 4 holes for
anchoring bolts, and has a hole for electrical conduits.
SHIPPING WEIGHT
PART NUMBER
10 lb (4.5 kg)
490058
The solenoid automatically disengages the
hydraulic locking system of the barrier when the
main power is not available, allowing the beam to
be raised by hand. This option requires a 230VAC
power supply.
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
401051
2. 615 Foundation Plate
The plate measures 12 in. x 12 in., has 4 holes for
anchoring bolts, and has a hole for electrical conduits.
SHIPPING WEIGHT
PART NUMBER
9 lb (4.1 kg)
2556
5. Anti-Vandalism Valve
Protects the integrity of the hydraulic system in
the event the beam is forced
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
401056
3. 640 Foundation Plate
The plate measures 15.25 in. x 9 in., has 4 holes for
anchoring bolts, and has a hole for electrical conduits.
SHIPPING WEIGHT
PART NUMBER
14 lb (6.4 kg)
490059
FYI
Beams, because of their size, must be
shipped by truck. Freight charges for
shipping can be as much or more than the
cost of the beam. Please request a freight
quote from FAAC to determine total costs.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
4
Barrier Gate Accessories
6. 624 Slave Card
8. 624 Relay Card
The optional slave card enables two opposing
barriers to operate simultaneously.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5kg)
790846
The optional relay card provides 6 normally open
electrical contacts for connecting auxiliary equipment (computer controls, revenue equipment,
alarms, etc.) or monitoring the barrier’s status.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
360013
7. 624 FSW Card
The optional FSW card enables safety devices to
work when a 620/640 barrier is operating in the
P (parking) mode.
9. Hinged Breakaway System
(with sensor kit)
For use with round beams on the Model 620 barrier.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
790847
SHIPPING WEIGHT
PART NUMBER
428163*
FYI
Beams, because of their size, must be
shipped by truck. Freight charges for
shipping can be as much or more than the
cost of the beam. Please request a freight
quote from FAAC to determine total costs.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
5
Barrier Gate Accessories
BEAMS
10. 620 Aluminum Rectangular Beams
These aluminum beams are for replacement
purposes where a fixing bracket is already available. All 620 rectangular aluminum beams measure 1 in. x 4 in. x the length of the beam ordered.
For skirted or articulated beams order the length
beam needed and the skirt kit or articulated beam
kit. (See #21 and #22 of this section)
6 Foot (1.8 m) Length
SHIPPING WEIGHT
PART NUMBER
9 lb (4.1 kg)
428058
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
12 lb (5.4 kg)
428057/620*
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
15 lb (6.8 kg)
428059/620*
13 Foot (4 m) Length
SHIPPING WEIGHT
PART NUMBER
19.5 lb (8.8 kg)
428060/620*
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
12 lb (5.4 kg)
428057
12. 620 Wooden Beam
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
15 lb (6.8 kg)
428059
These wooden beams are for replacement
purposes where a sandwich plate is already available. All 620 wood beams are made of clear redwood and measure 1 in. x 4 in. x the length of the
beam ordered.
8 Foot (2.4 m) Length
13 Foot (4 m) Length
SHIPPING WEIGHT
PART NUMBER
19.5 lb (8.8 kg)
428060
SHIPPING WEIGHT
PART NUMBER
\
5.5 lb (2.5 kg)
2146
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
11. 620 Aluminum Rectangular Beam Kit
These beam kit numbers are to be used when
ordering with a 620 barrier and include the fixing
bracket. If ordered separately the cost of the fixing bracket will be added to the price.
6 Foot (1.8 m) Length
SHIPPING WEIGHT
PART NUMBER
7 lb (3.2 kg)
2038
12 Foot (3.7 m) Length
SHIPPING WEIGHT
PART NUMBER
8.5 lb (3.9 kg)
2039
14 Foot (4.3 m) Length
9 lb (4.1 kg)
428058/620*
SHIPPING WEIGHT
PART NUMBER
10 lb (4.5 kg)
2040
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
6
Barrier Gate Accessories
13. 620 Wooden Beam Kits
These beam kit numbers are to be used when
ordering with a 620 barrier and include the sandwich plate. If ordered separately the cost of the
sandwich plate will be added to the price.
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
20.5 lb (9.5 kg)
2146**
15. 615 Aluminum Beam Kit
These aluminum beams come with a fixing bracket
and are optional for new applications. All aluminum
beams measure 1 in. x 4 in. x length of beam
ordered. For replacement beams use the 620 aluminum replacement beams, #10 above. (Length of
the 615 beams must be 6 ft. thru 10 ft. only.)
6 Foot (1.8 m) Length
SHIPPING WEIGHT
PART NUMBER
19 lb (4.5 kg)
428058*
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
22 lb (10 kg)
2038**
SHIPPING WEIGHT
PART NUMBER
12 Foot (3.7 m) Length
SHIPPING WEIGHT
PART NUMBER
23.5 lb (10.9 kg)
2039**
12 lb (5.4 kg)
428057*
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
14 Foot (4.3 m) Length
SHIPPING WEIGHT
PART NUMBER
8 Foot (2.4 m) Length
15 lb (6.8 kg)
428059*
25 lb (11.3 kg)
2040**
FYI
14. 620 Aluminum Round Beams
Round aluminum beams are for use with the 620
barrier and measure 3 in. diameter x the length of
the beam ordered. If the beam is ordered with the
620 barrier, a standard round fixing bracket will
be included.
For new applications,
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
12 lb (5.4 kg)
428078
Use these part numbers with an asterisk ( * )
because the mounting hardware is included.
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
Beams, because of their size, must be
shipped by truck. Freight charges for
shipping can be as much or more than the
cost of the beam. Please request a freight
quote from FAAC to determine total costs.
15 lb (6.8 kg)
428075
12 lb (5.4 kg)
428078*
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
15 lb (6.8 kg)
428075*
13 Foot (4 m) Length
SHIPPING WEIGHT
PART NUMBER
19.6 lb (8.8 kg)
428079
13 Foot (4 m) Length
SHIPPING WEIGHT
PART NUMBER
19.6 lb (8.8 kg)
428079*
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
7
Barrier Gate Accessories
16. 615 Wooden Beam Kits
These wooden beam kits come with a sandwich
plate and are standard for new applications. All
wooden beams are made of clear redwood and
measure 1 in. x 4 in. x length of beam ordered. For
replacement beams use the 620 wooden replacement beams, #12 above. (Length of the 615 beams
must be 6 ft. thru 10 ft. only.)
8 Foot (2.4 m) Length
SHIPPING WEIGHT
PART NUMBER
30 lb (13.6 kg)
428063
23 Foot (7 m) Length
SHIPPING WEIGHT
PART NUMBER
34.5 lb (15.6 kg)
428064
18. 640 Aluminum Beam Kits
22 lb (10 kg)
2038*
These beam kits are to be used when ordering
with a 640 barrier and include the fixing bracket.
If ordering separately the cost of the fixing bracket will added to the price.
13 Foot (4 m) Length
12 Foot (3.7 m) Length
SHIPPING WEIGHT
PART NUMBER
SHIPPING WEIGHT
PART NUMBER
20.5 lb (9.5 kg)
2146*
10 Foot (3 m) Length
SHIPPING WEIGHT
PART NUMBER
20 Foot (6 m) Length
23.5 lb (10.9 kg)
2039*
SHIPPING WEIGHT
PART NUMBER
19.5 lb (8.8 kg)
428061*
16 Foot (4.9 m) Length
SHIPPING WEIGHT
PART NUMBER
17. 640 Aluminum Beam
These aluminum beams are for replacement
purposes where a fixing bracket is already available. All 640 rectangular aluminum beams measure 2 in. x 4 in. x length of beam order. For the
skirted beams order the aluminum beam and the
skirted beam kit. (See #22 of this section)
13 Foot (4 m) Length
SHIPPING WEIGHT
PART NUMBER
20 Foot (6 m) Length
SHIPPING WEIGHT
PART NUMBER
30 lb (13.6 kg)
428063*
23 Foot (7 m) Length
19.5 lb (8.8 kg)
428061
16 Foot (4.9 m) Length
SHIPPING WEIGHT
PART NUMBER
11.25 lb (5.1 kg)
428062*
SHIPPING WEIGHT
PART NUMBER
34.5 lb (15.6 kg)
428064*
FYI
11.25 lb (5.1 kg)
428062
Beams, because of their size, must be shipped
by truck. Freight charges for shipping can be
as much or more than the cost of the beam.
Please request a freight quote from FAAC to
determine total costs.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
8
Barrier Gate Accessories
19. 640 Wood Beam
20. 640 Wood Beam Kits
These wooden beams are for replacement
purposes where a sandwich plate is already
available. All 640 wooden beams are made of
clear redwood an measured 2 in. x 6 in. x length
of beam ordered.
16 Foot (4.9 m) Length
SHIPPING WEIGHT
PART NUMBER
26.25 lb (12 kg)
2410
These beam kits are to be used when ordering
with a 640 barrier and including the sandwich
plate. If ordered separately the cost of the sandwich plate will be added to the price
16 Foot (4.9 m) Length
SHIPPING WEIGHT
PART NUMBER
11.25 lb (5.1 kg)
2410*
18 Foot (5.5 m) Length
18 Foot (5.5 m) Length
SHIPPING WEIGHT
PART NUMBER
27.5 lb (12.5 kg)
2418
SHIPPING WEIGHT
PART NUMBER
12.5 lb (5.7 kg)
2418*
20 Foot (6 m) Length
20 Foot (6 m) Length
SHIPPING WEIGHT
PART NUMBER
29 lb (13.2 kg)
2043
SHIPPING WEIGHT
PART NUMBER
14 lb (6.4 kg)
2043*
FYI
Beams, because of their size, must be
shipped by truck. Freight charges for
shipping can be as much or more than the
cost of the beam. Please request a freight
quote from FAAC to determine total costs.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
9
Barrier Gate Accessories
BEAM KITS
21. Articulated Beam Kits
Articulated beams are used in parking garages or
other applications with low overhead clearances.
In addition to ordering an aluminum beam for your
Model 620 barrier, you need to order this kit. The
kit will handle a maximum 9 ft ceiling height.
FAAC will articulate the beam for you. Supply us,
IN WRITING, the distance between the base of
the barrier cabinet and the ceiling.
SHIPPING WEIGHT
PART NUMBER
15 lb (6.8 kg)
428137
Articulated Beam
22. Skirted Beam Kits
A skirted beam keeps vehicles from passing under
a barrier beam and consists of an aluminum beam
(ordered separately) and one or more kits for skirting the beam. Each kit is a series of interlocking,
jointed metal pieces forming a framework you
attach to the bottom of the beam. When the
beam raises, gravity causes the skirting to collapse against the vertical beam.
If you are retrofitting the skirt to an existing beam,
call us about whether you need a different compression spring for your operator.
Order a combination of kits whose combined
length is 1 foot shorter than the length of your aluminum beam:
. One kit contains mounting hardware and the
metal skirt that is about 6 feet (more precisely, 2
meters) long. The kit will work with Models 620
and 640 barriers.
. The other kit contains mounting hardware and
the metal skirt that is about 10 feet (more precisely, 3 meters) long. The kit will work with Models
620 and 640 barriers.
Skirted Beam
(comes assembled,
ready to attach to beam)
6 Foot (2 m) Skirt Kit
SHIPPING WEIGHT
PART NUMBER
5 lb (2.3 kg)
4282431
10 Foot (3 m) Skirt Kit
SHIPPING WEIGHT
PART NUMBER
10 lb (4.5 kg)
4282441
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
10
Other accessories that work
with all types of FAAC operators,
such as safety devices, access
control systems, etc., are listed
in the General Accessories
Section, page 17.
To guarantee the safety and
efficiency of its equipment, FAAC
strongly recommends that qualified
personnel test the safety system
on an annual basis, as well as
maintain the overall hydraulic
or mechanical system.
Slide Accessories
NOTE:
The following accessories are
specific to slide operators only.
11
Slide Gate Accessories
3. Gear Rack
1. Chain
The chains we sell work with any of our FAAC
Slide Gate operators. We offer #40 nickel plated
chain and #40 stainless steel chain. You receive
two master links with each length of chain you order.
The galvanized steel rack section measures
3.28 ft (1 m) long and works with any of our
FAAC Slide Gate Operators. Supplied with rackto-gate hardware.
Nickel Chain
SHIPPING WEIGHT
PART NUMBER
.5 lb/ft (.2 kg)
2000
SHIPPING WEIGHT
PART NUMBER
6 lb per section (2.7 kg)
719323
Stainless Steel Chain
SHIPPING WEIGHT
PART NUMBER
PRICE PER FT:
.5 lb/ft (.2 kg)
2002
$15.00
2. Chain-to-Gate Mounting Hardware
The hardware needed to attach the two ends of
chain to the gate. Includes 2 mounting brackets,
2 tension bolts and 2 master links.
4. Locking Cap
(for use with 820/860 operators)
The locking cap provides extra security for the
manual release lever receptacle in order to safeguard the manual release mechanism. 820/860
operators
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
418746
With nickel plated chain master links
SHIPPING WEIGHT
PART NUMBER
5 lb/ft (.2.3 kg)
CTG01*
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
12
Slide Gate Accessories
5. Remote Manual Release Lever
(for use with 820/860 operators)
The alternate lever for the manual release mechanism
is useful in applications where the manual release
mechanism cannot be easily reached. The remote
lever has holes for chain or cabling on each end.
SHIPPING WEIGHT
PART NUMBER
1 LB (.5 KG)
713005
6. 746/844 Foundation Plate
(for ground level mounting)
The foundation plate for the 746 or 844 Operator
measures 6 x 10.5 in. and has rebar anchors to be
set in the concrete pad.
SHIPPING WEIGHT
PART NUMBER
6 lb (2.7 kg)
2278
7. 820/860 Foundation Plate
(for ground level mounting)
The foundation plate measures 9.25 x 6.5 in. and
has mounting feet that unfold and extend into your
concrete pad. A hole for electrical conduit is
predrilled in the plate.
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
423002
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
13
Slide Gate Accessories
8. Mounting Pedestal
(for elevated mounting of models 746, 844, 820
and 860)
The 18 in. galvanized mounting pedestal is for
FAAC slide gate operators listed above.
SHIPPING WEIGHT
PART NUMBER
21 lb (9.5 kg)
2411
9. Model 885 Mounting Pedestal
The 18 in. high painted mounting pedestal is for
FAAC slide gate model 885.
SHIPPING WEIGHT
PART NUMBER
62 lb (28.1 kg)
2412
INSTALLATION KITS
10. Slide Installation Kit
(models 746, 844, 820, 860) with Pedestal for
Chain Drive Operators
1 30 ft (9.14 m) nickel plated chain
(stainless steel chain also available)
1 Mounting pedestal
1 8 in. x 10 in. x 5.5 in. (20 x 25 x 14 cm) NEMA 4
fiberglass enclosure with backplate and power
switch
1 Hardware set for enclosure-to-pedestal
attachment
2 Sets of conduit and connectors for connecting
enclosure to operator
.
.
.
.
.
with nickel plated chain18 Foot (5.5 m) Length
SHIPPING WEIGHT
PART NUMBER
50 lb (22.7 kg)
3501*
with stainless steel chain
SHIPPING WEIGHT
PART NUMBER
14
50 lb (22.7 kg)
35S1*
Note: Installation kits, when not
purchased with an 820 CD or 860 CD, are
shipped as disassembled components. All
kits in this section require assembly.
The installation kit you order for your FAAC
slide gate installation depends
on the following:
• Does your FAAC Slide Gate Operator have a chain or
rack & pinion drive? Be sure to refer to the proper kit
description below for your operator.
• If your operator has a rack & pinion drive, do you
want a pedestal or foundation plate? Refer to the
proper kit description below for your installation.
Slide Gate Accessories
11. Slide Installation Kit
13. 820/860 Installation Kit
(models 746, 844, 820, 860) with Pedestal for
Rack & Pinion Drive Operators
1 23 ft (7 m) gear rack
1 Mounting pedestal
1 8 in. x 10 in. x 5.5 in. (20 x 25 x 14 cm) NEMA 4
fiberglass enclosure with backplate and
power switch
1 Hardware set for enclosure-to-pedestal
attachment
2 Sets of conduit and connectors for connecting
enclosure to operator
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
with Foundation Plate for Rack & Pinion Drive
Operators
1 23 ft (7 m) gear rack
1 Foundation plate
1 8 in. x 10 in. x 5.5 in. (20 x 25 x 14 cm)
NEMA 4 fiberglass enclosure with backplate and
power switch
.
.
.
SHIPPING WEIGHT
PART NUMBER
50lb (22.7 kg)
3505*
63 lb (28.6 kg)
3503*
12. 746/844 Installation Kit
with Foundation Plate for Rack & Pinion Drive
Operators
1 23 ft (7 m) gear rack
1 Foundation plate
1 8 in.x 10 in. x 5.5 in. (20 x 25 x 14 cm)
NEMA 4 fiberglass enclosure with backplate and
power switch
.
.
.
SHIPPING WEIGHT
PART NUMBER
53 lb (24 kg)
3512*
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
15
This page is
intentionally blank.
16
Battery Back-up Units
19
Entry Systems and Devices
Switches
Telephone Entry Systems
Radio Controlled Systems
22-33
24
27
32
Safety and Security Devices
FAAC Photocell Systems
Miller Edges
Loops and Loop Detectors
Locks
Warning Lights
34-44
34
37
38
42
44
Electrical & Hardware
Timers
Ditek Surge Protection
Control Panel Enclosures
Mounting Post
45-52
45
48
49
50
Hinges
53
Barrier Gate Accessories (see Barrier Gate section p. 3)
Slide Gate Accessories (see Slide Gate section p. 11)
Two Year Limited Warranty on those
accessories manufactured by FAAC
(see back cover).
NOTE: To help you in choosing the right
accessories for an installation, we have
grouped certain items together.
These “families” of accessories are
separated by a large broken dash symbol
like this:
throughout the accessories section.
ACCESSORIES
Accessories Table of Contents
17
This page is
intentionally blank.
18
. One year limited warranty
Under normal conditions, the
batteries in the BC Pro and 700i
will last for several years.
However, for safety purposes, the
back-up system should be checked
and tested annually by qualified
personnel to ensure proper
functioning.
To guarantee the safety and
efficiency of its equipment, FAAC
strongly recommends that qualified
personnel test the safety system
on an annual basis, as well as
maintain the overall hydraulic
or mechanical system.
FAAC
Battery Back-up Units
(see back cover)
19
New
!
FAAC Model BC Pro 1050
and Model 700i battery back-up units
Applications: All FAAC 115 and 230 VAC operators
Operational Modes:
. Single Operation: The operator will open automatically upon detection of power failure
and reset when power is restored.
. Multiple Operation: For the continuous use mode, the number of cycles may be limited
due to battery life and size, ease of movement of gate leaves, etc.
. Fail Secure Operation: The FAAC battery backups can be set up in the "fail secure" operation
mode. However the number fo cycles may be limited due to battery life, ease of gate
movement, accessories amp draw load,etc.
Features:
.
.
.
.
Uninterruptible power back-up
Complete surge protection and EMI/RFI noise filtering
Four diagnostic LEDs to indicate “AC Present, On Battery, Battery Low/Replace, and Overload”
Also available in a dual gate system configuration.
Specifications:
BC Pro 1050
Size:
700I
14 x 16 x 6 in.
(35.6 x 40.6 x 15.2 cm)
Weight:
45 lbs. (16.8 kg)
Input/Output voltage:
120 VAC
230 VAC
Input/Output frequency:
60 Hz
50/60 Hz
Output VA:
1050
700
Output watts:
680
450
Recharge rate to 90%:
Maximum surge current:
2-4 hours
36,000 amps
160*
Low volt switch to battery:
94 VAC
190 VAC
Max amp. draw:
10 amp.
5 amp.
*AC suppression joule/amp ratings
Dual Configuration:
10 amp. system
Shipping Weight:
45 lbs. (16.8 kg)
Part Number:
3520*
3521*
Dual System
Part Number:
3520D*
3521D*
20
BC Pro 1050
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
Model 885 Battery Back-up
FAAC Model 885 Slide Gate Operator optional Battery Back-up Unit.
. 24 VDC motor
. 90 Watt
. 1400 rpm
. Adjustable torque
. “One shot” open
programmable (fail safe)
. Auto open programmable
(fail secure)
Shipping Weight:
26 lbs. (11.79 kg)
Part Number:
390305*
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
21
Entry Systems and Devices
3. DigiKeyboard
Entering a 4 digit combination on the 9 button
keyboard actuates the gate. May be programmed
to one of 4,095 combinations.
Features:
Required power supply: 24 VDC
(available on FAAC control panels.) In d o o r or
outdoor use
Dimensions:
2.75 in. high x 2.75 in. wide x 3.43 in deep (7 cm x
7 cm x 8.7 cm). Depth measurement
includes housing.
For use with A, E, and S FAAC control panel logics:
A = automatic logic: signal to open; gate closes
automatically after timed pause
E = garage door-like logic: signal to open; signal to close
S1 = security logic: similar to A logic, useful in
reducing tailgating
The DigiKeyboard requires the following additional equipment (priced separately):
Metal Housing (see #5 this section), Plastic
Housing
(see #6 this section), or Mounting Post Kit
(see #7 this section)
DS Decoder , (formerly called the MD01)
(see #4 this section)
.
.
DigiKeyboard
.
.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
404005
4. DS Decoder (formerly MD01)
This is the "brain" behind the DigiCard and
DigiKeyboard Systems. Dip switches provide for
code selection. More than one DS Decoder may
be used if multiple codes are desired.
Features:
Required power supply: 24 VDC
(available on FAAC control panels.)
Plugs into 455 D control panel
.
.
SHIPPING WEIGHT
PART NUMBER
DS Decoder
(formerly MD01)
2 lb (1 kg)
785502
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
22
Entry Systems and Devices
5. Metal Housing for DigiCard Reader
& DigiKeyboard
Painted mild steel.
Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in.
deep (7 cm x 7 cm x 5.7 cm)
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
720037
Metal Housing for DigiCard
Reader & DigiKeyboard
6. Plastic Housing for DigiCard Reader
& DigiKeyboard
Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in.
deep (7 cm x 7 cm x 5.7 cm)
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
720043
Plastic Housing for DigiCard
Reader & DigiKeyboard
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
23
Entry Systems and Devices
8. T10 Key Switch
Features:
Switch rating: 250 VAC; 10 amps
Indoor or outdoor use
Key returns when released
N.O. (Normally Opened) and N.C. (Normally Closed)
Connection
For use with A, E, and S FAAC control panel logics:
A = automatic logic: signal to open; gate closes
automatically after timed pause
E = garage door-like logic: signal to open; signal
to close
S1 = security logic: similar to A logic, useful in
reducing tailgating
Dimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep
(7 cm x 7 cm x 10.2 cm) Depth measurement
includes housing.
The T-10 Key Switch requires the following additional equipment (priced separately):
Metal housing (see #10 this section) or Plastic
Housing
(see #11 this section)
.
.
.
.
T10 Key Switch
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
401010
9. Two-Button Switch
Features:
Switch rating: 250 VAC; 16 amp
Built-in warning light: 24 VAC; 3 watt (powered
off dedicated FAAC control panel terminals.)
Indoor use only
Open button has a N.O. (Normally Opened) and
a N.C. (Normally Closed) Connection.
Stop button has a N.O. (Normally Opened) and
a N.C. (Normally Closed) Connection.
For use with A, E, and S FAAC control panel logics:
A = automatic logic: signal to open; gate closes
automatically after timed pause.
E = garage door-like logic: signal to open; signal
to close
S1 = security logic: similar to A logic, useful in
reducing tailgating
.
.
.
.
.
Two-Button Switch
(2 Button Switch continued on next page)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
24
Entry Systems and Devices
(2 Button Switch Continued)
Dimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep
(7 cm x 7 cm x 10.2 cm) Depth measurement
includes housing.
The Two Button FAAC Switch requires the following additional equipment (priced separately):
Metal housing (see #10 this section) or Plastic
Housing (see #11 this section)
.
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
401002
10. Multi-Use Metal Housing
(For T-10 Key Switch, Two Button FAAC Switch,
and some photocells)
Powder coated steel.
Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in.
deep (6.4 cm x 6.4 cm x7 cm)
Multi-Use Metal Housing
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
720089
11. Multi-Use Plastic Housing
(For T-10 Key Switch, Two Button FAAC Switch,
and some photocells)
Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in.
deep (6.4 cm x 5.7 cm x7 cm)
Multi-Use Plastic Housing
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
720086
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
25
Entry Systems and Devices
12. T15 MP Two-Button Switch
Features:
Switch rating: 250 VAC; 10 amps
Built-in warning light: 24 VAC; 3 watt (powered off
dedicated FAAC control panel terminals.)
Indoor or outdoor use
Painted aluminum
Surface mounted
Actuate button is N.O. (Normally Opened)
Stop button is N.C. (Normally Closed)
For use with A, E, and S FAAC control panel logics:
A = automatic logic: signal to open; gate closes
automatically after timed pause
E = garage door-like logic: signal to open; signal
to close
S1 = security logic: similar to A logic, useful in
reducing tailgating
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in.
deep (10.2 cm x 7.3 cm x 5.7 cm)
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
T15 MP Two-Button Switch
3 lb (1.4 kg)
4022011
13. T15 B/C Three-Button Switch
Features:
Switch rating: 250 VAC; 10 amps
Indoor or outdoor use
Painted aluminum
Surface mounted
Open buatton is N.O. (Normally Opened)
Close button is N.O. (Normally Opened)
Stop button is N.C. (Normally Closed)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
1 momentary pressure switch: stop
P = 3 momentary switches: open, close and stop
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in.
deep (10.2 cm x 7.3 cm x 5.7 cm)
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
T15 B/C Three-Button Switch
3 lb (1.4 kg)
402202
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
26
Entry Systems and Devices
24. FAAC Telephone Entry - PhoneLink
New!
Features:
Available in 50 & 500 code capacity
Programmable personal master code
Programmable latch code
Programmable "one shot" code
Programmable "sleep" code,
disables both keypad & call button
2 relays
Adjustable volume
Event input
Night light with "60 second on" capability
Optional camera
Unique double ring cadence
Call waiting
Call button disconnect
By-pass switch included
.
.
.
.
.
.
.
.
.
.
.
.
.
.
PhoneLink
Dimensions: 7.4 in. x 7.4 in. x 5 in.
(18.8 x 18.8 x 12.7 cm)
Model
Shipping
Weight
Part
Number
PhoneLink - 50 code
PhoneLink - 500 code
9 lb (4.1 kg)
9 lb (4.1 kg)
2875
2876
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
27
Entry Systems and Devices
14. Select Engineered Systems
Telephone Entry - TEC II
Features:
LCD screen easy to read day or night
Directory displays two lines of characters, 5/19
in. size
14 characters per name
14 digit phone number per name
2 entrances expandable to 4 entrances
Programmable code and PIN lengths 1-9 digits
Modem capability: 1200 or 9900 baud (Selcom
95 or 2000)
Programmable via key pad, modem, RS232 or
current loop
Programmable open key pad for voice mail
Dimensions: 10 in. wide x 14 in. high x 2.75 in.
deep (25 cm x 36 cm x 7 cm)
.
.
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
TEC II
15 lb (6.8 kg)
3033
15. Select Engineered Systems
Telephone Entry - TEC IV
The TEC IV is identical to the TEC II (#14) except
LCD Directory displays 4 names, 3/8 in. size
Dimensions: 10 in. wide x 14 in. high x 3 in. deep
(25 cm x 36 cm x 8 cm)
.
SHIPPING WEIGHT
PART NUMBER
15 lb (6.8 kg)
3034
TEC IV
16. Select Engineering Systems
Telephone Entry - Select Gate 2
Features:
Uses existing phone lines
Lighted front panel
Local call waiting (bi-directional)
Call forwarding capability
Dials 5 outside phone numbers
Four selectable ring styles
Programmed memory not affected by power failure
Optional 2nd and 3rd relays
Dimensions: 9.5 in. wide x 7 in. high x 4.33 in.
deep (24 cm x 18 cm x 11 cm)
.
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
28
8 lb (3.6 kg)
3070
Select Gate
Entry Systems and Devices
17. Select Engineered Systems
Telephone Entry - TEC 101
Features:
No sunshield needed to read LCD display
Programmable via keypad or with optional
modem and software
Four capacities: 50, 125, 500 and 995.
Each offers same number of phone numbers,
PIN codes and names.
Dials up to 14 digit telephone numbers
Two line LCD display, provides directory names
one at a time
Dimensions: 8 in. wide x 11 in. high x 3 in. deep
20 cm wide x 28 cm high x 8 cm deep
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
(50 Code Version)
TEC 101
11 lb (5 kg)
2847
29
Entry Systems and Devices
23. FAAC AdvantageDK Keyless Entry
New!
For keyless access needs.
Features:
Programmable four digit codes available:
05, 50, 100, 500
Programmable personal master code
Programmable latch/unlatch code
Programmable "sleep" code
"Three strikes, you're out" - resets in 2 minutes
External event input
Two relays w/ variable output time: 1-99 seconds
LED indicators
Optional camera (intercom versions only)
Audible tone
Non-volatile memory
Night light
Limited two year warranty
.
.
.
.
.
.
.
.
.
.
.
.
.
ADV-05 to ADV-500
Dimensions:
. ADV-05 to ADV-500:
. ADV-05i to ADV-500i:
5.25 in. x 4.75 in. x 4.5 in.
(14.6 x 12.1 x 11.4 cm)
5.25 in. x 8.25 in. x 4.5 in.
(14.6 x 21 x 11.4 cm)
ADV-05i (with intercom)
to ADV-500i
Model
Model
Model
Model
Model
Model
Model
Model
Model
ADV-05
ADV-05i
ADV-50
ADV-50i
ADV-100
ADV-100i
ADV-500
ADV-500i
Shipping
Weight
Part
Number
5
7
5
7
5
7
5
7
2904
2905
2906
2907
2908
2909
2914
2915
lb
lb
lb
lb
lb
lb
lb
lb
(2.3
(3.2
(2.3
(3.2
(2.3
(3.2
(2.3
(3.2
kg)
kg)
kg)
kg)
kg)
kg)
kg)
kg)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
30
Entry Systems and Devices
27. Fire Entry Unit
Suitable for outdoor use and can be used with all
FAAC control panel logics (if you have questions, call
FAAC at 1-800-221-8278).
There are two versions: one Knox style and one
micro-switch style
Features:
• Both versions are painted bright red for
high visability
• Both have a zinc galvanized box with
UV-protected powder coated paint
• Both have a box which can hold keys or manual
release handles for access if electrical power is
unavailable (see explanation of “gate safe” and “gate
secure” installations on page 9 of the Products
Catalog or Price List).
Fire Entry Unit
Knox Style
Part 2980
Model 2980
• Uses a Knox lock (lock not provided). Knox locks
are provided by local fire departments or by the
Knox Company.
Model 2981
• Uses a padlock (lock not provided)
• Has a hinged door with built-in micro-switch.
Opening the door activates the switch.
Specifications:
• Required power supply: none required
• Micro switch: Normally Opened (N.O.) and
Normally Closed (N.C.)
Dimensions: 5.5 in. high x 4.5 in. wide x 4 in. deep
(14 cm x 11.4 cm x 10.2 cm)
SHIPPING WEIGHT
PART NUMBER
5 lb (2.3 kg)
2980 (Knox style)
SHIPPING WEIGHT
PART NUMBER
5 lb (2.3 kg)
2981 (Micro-switch style)
Fire Entry Unit
Micro-Switch Style
Part # 2981
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
31
Entry Systems and Devices
FAAC Radio Controlled System
28. FAAC TM1418 Transmitter
Features:
Choice of over 1000 codes
12V battery included
Dimensions: 1.5 in. x 3 in. x .63 in. (3.8 cm x 7.6
cm x 1.6 cm)
Note: the FAAC TM1418 transmitter requires the
FAAC RP1418 receiver (priced separately).
.
.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
1TM418DS
29. FAAC TM1418 Dual Transmitter
New!
Features: Same as Single Transmitter
Note: The FAAC TM1418 transmitter requires
the FAAC RP1418 receiver and the dual interface
board (see #31 below).
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
787317
30. FAAC RP1418 Receiver
The modular FAAC RP1418 receiver can be connected directly to any FAAC electronic control panel.
Features:
Required power supply: 24DVC
Plugs into all FAAC control panels
Eliminates the need to hard wire into the control panel.
Dip switches provided for code selection
Reception range (may vary with environmental
conditions.)
With built-in antenna wire: up to 100 ft (30 m)
With tuned aerial antenna kit: up to 300 ft (91 m)
Dimensions: 2 in. x 2 in. (5.1 cm x 5.1 cm)
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
1RP418DS
31. FAAC RP Interface Board
(to use FAAC reciever with non-FAAC product)
SHIPPING WEIGHT
PART NUMBER
32
1 lb (.5 kg)
787725
Entry Systems and Devices
32. FAAC Tuned Antenna Kit
The standard kit includes:
16 ft (5 m) of coax cable
10.5 in. (26.7 cm) whip antenna
Gate mount bracket
.
.
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
412003
FAAC Tuned Antenna Kit
Linear Radio Controlled System
33. Linear "MiniTransmitter"
Single Channel Transmitter
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2183
34. Linear Single Channel Transmitter
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2081
35. Linear Two Channel Transmitter
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2078
36. Linear Four Channel Transmitter
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2121
37. Linear Standard Radio Receiver
Note: When installing multiple receivers, make sure they are
located at least 8 ft from each other to avoid blocking
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2027
38. Linear DRQP Extended Distance Radio Receiver
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
2164
39. Linear Standard Antenna Kit
SHIPPING WEIGHT
PART NUMBER
3 lb (1.4 kg)
2034*
40. Linear EXA-GP Ground Plane
Antenna Kit
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2165
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
33
Safety and Security Devices
FAAC Photocell Systems
41. Standard Photocell Set
Features:
Required power supply: 19 - 34 VDC or
15 - 25 VAC
(available on FAAC control panels.)
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C.
(Normally Closed)
Transmitter to receiver sensing provides reliable
all-weather sensing
Range: 90 ft (27 m)
Dimensions: 2.75 in. wide x 2.75 in. high x 4 in.
deep
(7 cm x 7 cm x 10.2 cm) Depth measurement
includes housing.
The Standard Photocell Set requires the following additional equipment (priced separately):
Multi-Use Metal Housing (see #44, this
section), or
Multi-Use Plastic Housing (see #43, this section)
.
.
.
.
.
Standard Photocell Set
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
785152
42. Photobeam Photocell Set
Designed for wall mounting or for mounting in
special extruded aluminum mounting posts (see #
45, page 140).
Features:
Directional photocell with diagonal alignment
Angle of detection: +- 4 degrees
Range: 100 ft (30 m)
Obstacle detection time: 10 ms
Housing protection IP 54
Required power supply: 24-35 VDC
(available on FAAC control panels)
Output relay rating: 100 MA/24VDC
Output relay: N.O. (Normally Opened) and
N.C. (Normally Closed)
Receiver and Transmitter provide reliable
all-weather sensing
Dimensions: 2.75 in. x 3.75 in. x 1.75 in.
(7 cm x 9.5 cm x 4.5 cm)
.
.
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
Photobeam Set
2 lb (1 kg)
785163
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
34
Safety and Security Devices
FAAC Photocell Systems
43. Multi-Use Plastic Housing
(for T-10 Key Switch, Two Button FAAC Switch,
and some photocells)
Dimensions: 2 1/2 in. high x 2 1/4 in. wide x 2
3/4 in. deep
6.4 cm x 5.7 cm x 7 cm
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
720086
Multi-Use Plastic Housing
44. Multi-Use Metal Housing
(for T-10 Key Switch, Two Button FAAC Switch,
and some photocells)
Painted mild steel.
Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in.
deep (6.4 cm x 6.4 cm x7 cm)
.
SHIPPING WEIGHT
PART NUMBER
Multi-Use Metal Housing
2 lb (1 kg)
720089
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
35
Safety and Security Devices
45B. Photobeam Mounting Post and
Foundation Plate for Photobeam Set
Features:
Anodized aluminum
Standard post: 22 in. high (57.5 cm)
Double post
(holds photobeam and control switch): 44 in.
(111.5 cm)
NOTE: Photobeam sets require 2 posts
.
.
.
.
STANDARD POST
SHIPPING WEIGHT
PART NUMBER
DOUBLE POST
SHIPPING WEIGHT
PART NUMBER
5 lb (2.2 kg)
401028/737630*
9 lb (4.1 kg)
401035/737630*
401035
737630*
401028
737630*
Photobeam Mounting Posts
(Standard and Double)
3.54 in.
(9 cm)
2.75 in.
(7 cm)
2.38 in.
(5.8 cm)
3.75 in.
(9.5 cm)
4.5 in.
(11.5 cm)
2.38 in.
(5.8 cm)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
36
Safety and Security Devices
Sensing Edge By Miller Edges
Miller electrically activated Sensing Edges provide contact sensing. Sensing Edges are
available for most gate configurations.
NOTE: Miller Edges require the following
additional equipment (priced separately)
when used with FAAC control panels:
. 24 VDC external relay
(see #62, page 144)
46. MGO-20 Edge
This edge is equally sensitized on 3 sides. Black
mounting channels are available in aluminum or rigid
PVC. Extruded PVC cover can be black or caution
yellow.
.7 in.
(1.7 cm)
1 in.
(2.5 cm)
.25 in.
(.6 cm)
.25 in.
(.6 cm)
1.38 in.
(3.5 cm)
1.25 in.
(3.2 cm)
CALL FAAC FOR A QUOTE
1-800-221-8278
2-Wire #MG-020 Edge
3.25 in.
(8.3 cm)
47. MGR-20 Edge
Specially designed to clip onto a 2 in. round gate
post, this edge installs in minutes. Available in
black or caution yellow.
.63 in.
(1.6 cm)
2.25 in.
(6.4 cm)
2.25 in.
(5.7 cm)
CALL FAAC FOR A QUOTE
1-800-221-8278
1.25 in.
(3.2 cm)
2-Wire #MGR-020 Edge
48. MGS-20 Edge
Installation is a snap on 2 in. square gate posts. This
sleek design is available in black or caution yellow.
CALL FAAC FOR A QUOTE
1-800-221-8278
3.25 in.
(8.3 cm)
.63 in.
(1.6 cm)
2.13 in.
(5.4 cm)
2.5 in.
(6.4 cm)
2 in
(5.1 cm)
2-Wire #MGS-020 Edge
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
37
Safety and Security Devices
Loops and Loop Detectors
49. FAAC Model DSP-15 Loop Detector
The DSP-15 has been specifically designed to
handle all parking, drive-through and access control applications on virtually any size loop.
Required power supply: 24 VDC
Dimensions of board: 4 in. wide x .87 in. high x
2.75 in. deep (10.2 cm x 2.2 cm x 7 cm)
1. Selectable signaling provided by 2 relays:
a) Relay A provides main detection
output which can be modified by delay
and extension
b) Relay B is switch selectable to one
of four options:
1) True presence (no extension or delay)
2) Pulse on vehicle entering loop
3) Pulse on vehicle exiting loop
4) Loop fail output
Frequency: automatically tunes within one of four
operating ranges
Sensitivity:
10 sensitivity settings
can be used in special applications to insure
complete detection of high-bed vehicles
Connector: ten position terminal block (no harness required)
Indicators: separate power/fail and detect LED’s
Loop size: works on any in-ground inductive loop
from 20 to 1000uH
Hold time: normal or extended hold time is
selectable
Loop failure: if the loop fails, opens or shorts, the
power indicator flashes. Output B can also indicate this position if desired. The option to
“remember” an intermittent loop failure is also
provided.
Delay: can be selected to ignore fast moving
vehicles over the loop
Extension: extends a call for slow moving vehicles
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2664
50. Intersection Development Model 927
Loop Detector and Wiring Harness
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
504001B*
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
38
Safety and Security Devices
Loops and Loop Detectors
Note: A rule of thumb for determining the height of a loop’s inductive field is:
the height of the inductive field is 2/3 the length of the loop’s shortest side.
Saw-Cut Loops
51. Saw Cut Loops with 30 ft (9.1 m) Twisted Pair
Lead-in 18 gauge, XLP insulation
Loop Size
Shipping Part
Weight
Number
2
4
4
4
6
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
ft
ft
ft
ft
ft
x
x
x
x
x
6 ft (0.6 m x 1.8 m)
6 ft (1.2 m x 1.8 m)
8 ft (1.2 m x 2.4 m)
10 ft (1.2 m x 3.0 m)
12 ft (1.8 m x 3.7 m)
2590
2591
2567
2592
2569
Saw Cut Loop
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
52. Saw Cut Loops with 50 ft (15 m ) Twisted Pair
Lead-in 18 gauge, XLP insulation
Loop Size
Shipping Part
Weight
Number
4 ft x 6 ft (1.2 m x 1.8 m)
5 lb (2.3 kg) 2562
4 ft x 8 ft (1.2 m x 2.4 m)
5 lb (2.3 kg) 2566
Saw Cut Loop
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
39
Safety and Security Devices
Loops and Loop Detectors
53. Loop Sealant for Saw Cut Loops
30 fl. oz. (0.9 L) caulking cartridge
Note: the thickness of the loop wire in the preceding #43 and #44 is .13 in. (0.32 cm).
The wire’s height ranges from .55 in. (1.4 cm) to .34 in. (0.86 cm).
Linear Feet of Coverage for One Cartridge
Saw Cut
Depth in Inches
Linear Meters of Coverage for One Cartridge
Saw Cut Width in Inches
.13
.2
.25
.5
Saw Cut
Depth in cm
Saw Cut Width in cm
0.3
0.5
0.6
1.3
1
36 ft
24 ft
18 ft
9 ft
2.5
11 m
7.3 m
5.5 m
2.7 m
1.5
24 ft
18 ft
12 ft
6 ft
3.8
7.3 m
5.5 m
3.7 m
1.8 m
2
18 ft
12 ft
9 ft
4.5 ft
5.1
5.5 m
3.7 m
2.7 m
1.4 m
Quantity
Shipping
Weight
Part
Number
1 cartridge
3 lb (1.4 kg)
2166
(when ordering, please specify gray or black sealant)
Pave-Over Loops
54. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops
with 30 ft (9.1 m) Twisted Pair Lead-in
Loop Size
Shipping Part
Weight
Number
2
4
4
4
6
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
4 lb (1.8 kg)
ft
ft
ft
ft
ft
x
x
x
x
x
6 ft (0.6 m x 1.8 m)
6 ft (1.2 m x 1.8 m)
8 ft (1.2 m x 2.4 m)
10 ft (1.2 m x 3.0 m)
12 ft (1.8 m x 3.7 m)
Note: Other loop sizes and lead-in lengths are
available on request.
2593
2594
2595
2596
2597
Pave-Over Loop
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
40
Safety and Security Devices
Loops and Loop Detectors
55. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style
Loops with 50 ft (15 m) Twisted Pair Lead-in
Loop Size
Shipping Part
Weight
Number
2
4
4
4
6
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
ft
ft
ft
ft
ft
x
x
x
x
x
6 ft (0.6 m x 1.8 m)
6 ft (1.2 m x 1.8 m)
8 ft (1.2 m x 2.4 m)
10 ft (1.2 m x 3.0 m)
12 ft (1.8 m x 3.7 m)
2561
2560
2559
2558
2557
56. .5 in. (1.24 cm) Flexible Conduit for
Lead-in Protection
Length
15 ft
20 ft
25 ft
30 ft
45 ft
50 ft
Shipping
Weight
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
5 lb (2.3 kg)
Part
Number
2598
2599
2600
2601
2602
2603
Surface Mount Loops
57. Surface Mount Loops
Call FAAC for specifications and
pricing information on
Loops
Temporary adhesive
Permanent adhesive
.
.
.
Surface Mount Loop
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
41
Safety and Security Devices
Locks
58. FAAC Single Cylinder Electric Lock
Features:
Required power supply: 12 VAC pulsed
(available on FAAC control panels.)
Manual keyed operation from one side of
he gate
3 keys provided
Strike plate included
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
6 lb (2.7 kg)
712650/712651*
Single Cylinder Electric Lock
(strike plate not pictured)
59. FAAC Double Cylinder Electric Lock
Features:
Required power supply: 12 VAC pulsed
(available on FAAC control panels.)
Manual keyed operation from both sides
of the gate
6 keys provided
Strike plate included
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
6 lb (2.7 kg)
712650/712652*
Side assembly of electric lock for 1-leaf gate
1
2
3
4
5
6
Electric lock
Base plate
Strike plate
Side rabbet ledge
Spring latch
Through cylinder and barrel
(double cylinder electric lock only)
7 Pilot
8 Sliding guide
9 Cover plate
NOTE: Items 4,7,8,& 9 are not
included with lock.
Double Cylinder Electric Lock
(strike plate not pictured)
2 in.
.2 in.
(.5 cm)
1.5 in. (3.6 cm)
4 in. (10 cm)
5 in. (12.4 cm)
.2 in. (.5 cm)
6 in. (14.9 cm)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
42
Safety and Security Devices
Locks
60. Securitron Model M62-GF
Electromagnetic Lock
Features:
Required power supply: 24 VDC
(available on FAAC control panels.)
Holding force: 1200 lb (540 kg)
Conduit connector: Universal .5 in. ID (female)
.75 in. OD (male)
Four mounting holes on the face of the lock
Strike plate
Attachment hardware
Dimensions:
8 in. wide x 1.75 in. deep x 2.9 in. high
(20.3 cm x 4.4 cm x 7.4 cm)
The Securitron Model M62-GF Electromagnetic
Lock requires the following additional equipment (priced separately) when used with a
FAAC control panel:
24 VDC External Relay (see #62 this section or
12 VAC on 455 D)
.
.
.
.
.
.
Model M62-GF
Electromagnetic Lock
(strike plate not pictured)
.
SHIPPING WEIGHT
PART NUMBER
14 lb (6.4 kg)
2353
Z Brackets available.
Call FAAC for information.
61. Securitron Model M32F-24
Electromagnetic Lock
Features:
Required power supply: 24 VDC
(available on FAAC control panels.)
Holding force: 600 lb (270 kg)
Two mounting holes on the face of the lock
Strike plate
Attachment hardware
Dimensions:
8 in. wide x 1.5 in. deep x 1.88 in. high
(20.3 cm x 3.8 cm x 4.8 cm)
The Securitron Model M32F Electromagnetic
Lock requires the following additional equipment (priced separately) when used with a
FAAC control panel:
24 VDC External Relay (see #62 this section or
12 VAC on 455 D)
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
Model 32F-24
Electromagnetic Lock
(strike plate not pictured)
12 lb (5.4 kg)
2354
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
43
Safety and Security Devices
.1 in. (.26 cm)
62. 24 VDC External Relay
.52 in. (1.3 cm)
SHIPPING WEIGHT
PART NUMBER
1 lb (.5 kg)
2347
1.5 in. (3.8 cm)
1.7 in. (4.4 cm)
.
.02 in. (.05.16
cm)in.
(.42 cm)
.25 in.
(.64 cm)
.25 in.
(.65 cm)
.14 in.
(.35 cm)
.84 in. (2.2 cm)
.08 in.
(.2 cm)
1.07 in. (2.8 cm)
.12 in. x .05 in.
(.3 x .12 cm) hole
Use with MAG lock
Open/hold open feature
.21 in.
(.55 cm)
1.4 in.
(3.6 cm) or less
24VDC External Relay
Warning Lights
63. FAACLamp
Connects to FAAC 115 VAC or 230 VAC control
panels; please specify voltage when ordering.
Amber light flashes while gate opens and closes
Dimensions: 4 in. x 4.5 in. (5.5 in. including base)
x 5 in. (10 cm x 11.5 cm [14.2 cm] x 13 cm)
.
SHIPPING WEIGHT
PART NUMBER
PART NUMBER
Replacement Bulb
1.1 lb (.5 kg)
410013 (230 VAC)
410013* (115 VAC)
2128 (230 VAC)
2132 (115 VAC)
FAACLamp
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
44
Electrical & Hardware
Timers
64. Grasslin Digi 20-A-24
24hr 7 day Time Switch
Features:
Required power supply: 24 VAC or 24 VDC
(available on FAAC control panels)
Output relay rating: 277 VAC, 16A
Output relay: Single Pole Double Throw
Signals up to 20 times per timing period
Maximum timing period: 1 week
Minimum time between signals: 1 minute
Daylight time change over: Manual
Manual override
.
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
Grasslin Digi 20-A-24 Time Switch
2 lb (1 kg)
2144
65. Syrelec BLRU Countdown Timer
Features:
Required power supply: 24 VAC, 24 VDC or
110 VAC
(24 VAC, 24 VDC are available on FAAC
control panels)
Output relay rating: 240 VAC, 10A
Output relay: Single Pole Double Throw
Count down range: 0.1 seconds to 10 hours
Counts down to send activation signal
Counts down to send de-activation signal
Din rail or panel mounted
Dimensions: 1 in. wide x 3 in. high x 3.13 in.
deep (2.5 cm x 7.6 cm x 7.9 cm)
.
.
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2162
Syrelec BLRU Countdown Timer
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
45
This page is
intentionally blank.
46
Electrical & Hardware
68. Cord Protection Adapter
for Models 400, 422, and 402 Operators
Features:
Facilitates attachment of flexible conduit for
shielding of the operator's cable
Female receptacle for .5 in. flexible
conduit connector
Hardware for attachment to operator included
.
.
.
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2071*
Cord Protection Adapter shown mounted
to Model 400 operator.
Note: The electrical outlet box must be
mounted higher than the operator, as
shown, to prevent the possibility of water
entering the electrical outlet box through
the flexible conduit.
69. Transformer/Step-up
. 120 VAC > 240 VAC
. 240 VAC > 120 VAC
. 500 VA
. Enclosure 3R outdoor
. UL/CSA Listed
Dimensions will not exceed:
4.5 in. wide x 9.5 in. high x 4 in. deep
Note: Position
of mounting 17
tabs
SHIPPING
WEIGHT
lb on
(7.7case
kg) may vary
PART NUMBER
2199
Transformer
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
47
Electrical & Hardware
Ditek Surge Protection
Ditek surge protectors detect potentially harmful surges in electrical current and re-direct
these surges to ground.
70. Hard Wired Protection for
110/125 VAC circuits
. Self-restoring after each surge within ratings
. .5 in. conduit connector provided
Dimensions: 3 in. wide x 1.9 in. high x 1.5 in. deep
(7.6 cm x 4.8 cm x 3.8 cm)
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2355
71. Hard Wired Protection for 220 VAC
Single Phase Circuits
. Self-restoring after each surge within ratings
. .5 in. conduit connector provided
Dimensions: 4 in. wide x 2 in. high x 2 in. deep
(10.2 cm x 5.1 cm x 5.1 cm)
SHIPPING WEIGHT
PART NUMBER
2 lb (1 kg)
2356
Ditek Surge Protector
for 110/125/220 VAC circuits
(115 version shown; 220 version has similar
configuration, but larger dimensions)
72. Screw Terminal Connection Protection
for Low Voltage Power Loop, Voice,
and Data Circuits
. Provides protection for power, data, LED and
audible circuits
. One model protects 5V, 12V and 24V circuits
. Self-restoring after each surge within ratings
Dimensions: 3 in. wide x 1.6 in. high x 1.6 in. deep
(7.6 cm x 4 cm x 4 cm)
SHIPPING WEIGHT
PART NUMBER
Ditek Surge Protector for
Low-Voltage Circuits
2 lb (1 kg)
2358
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
48
Electrical & Hardware
Enclosures
73. Model FRP (Fiber Reinforced Plastic)
Enclosure
10 in.
(25.4 cm)
5.5 in.
(14 cm)
The Model FRP is ideal for applications that
require an enclosure that is extremely tough.
Strong, highest quality construction
Rubberized gasket door seal
Includes metal mounting plate with grounding
lug
UL and CSA Listed
Two .9 in. (2.2 cm) pre-drilled holes in box bottom
.
.
.
.
.
SHIPPING WEIGHT
PART NUMBER
12 in.
(30.5 cm)
6 lb (2.7 kg)
2359
Model FRP enclosure
74. Model L (Latching) Plastic Enclosure
. Keyed latch on hinged door
. Rubberized gasket door seal
. Door can open to right or left
. Will accept DIN rail
. Molded standoffs for control panel mounting
. Three 1.13 in. (30 mm) pre-drilled holes (with
plugs) in box bottom
. Two .75 in. (2 cm) knockouts in box bottom
SHIPPING WEIGHT
PART NUMBER
8.38
(21.3 in.
cm)
4.65
(11.8 in.
cm)
10.6 in.
(27 cm)
5 lb (2.3 kg)
720118
Plastic enclosure
with lockable hinged cover
75. Model E (Economy) Plastic Enclosure
. Rubberized gasket door seal
. Will accept DIN rail
. Molded standoffs for control panel mounting
. Three 1.13 in. (3 cm) pre-drilled holes (with
plugs) in box bottom
. Two .75 in. (2 cm) knockouts in box bottom
3.3
(8. 8 in
5c .
m)
in. )
2.26 cm
(5.
8.
(20 03 in
.
.4
cm
)
10.4 in.
(26.5 cm)
SHIPPING WEIGHT
PART NUMBER
4 lb (1.8 kg)
720119
Model E plastic enclosure
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
49
Electrical & Hardware
Enclosures
76. 14 in. x 16 in. x 6 in. Fiber Reinforced Enclosure
. Hinged lockable
. Strong, highest quality construction
. Rubberized gasket door seal
. Weather resistant
. UL and CSA Listed
. Two .9 in. (2.2 cm) pre-drilled holes in box bottom
W/backplate wired 115V
SHIPPING WEIGHT
PART NUMBER
16 lb (7.3 kg)
3300
Large Fiberglass Enclosure, opened and locked
W/backplate wired 230V
SHIPPING WEIGHT
PART NUMBER
16 lb (7.3 kg)
3303
WO/backplate
W/backplate wired 24 VDC
SHIPPING WEIGHT
PART NUMBER
16 lb (7.3 kg)
3306
SHIPPING WEIGHT
PART NUMBER
11 lb (5 kg)
3309
Mounting Post
77. Gooseneck Mounting Post
Powder coated steel
. Height: 41.75 in. (106 cm)
. Mounting face: 3.75 in. x 3.75 in. (9.5 cm x 9.5 cm)
SHIPPING WEIGHT
PART NUMBER
10 lb (4.5 kg)
2103
.25 in.
(.6 cm)
1.14 in.
(2.9 cm)
1.9 in.
(4.8 cm)
3.86 in.
(9.8 cm)
5 in.
(12.7 cm)
.75 in.
(1.9 cm)
.38 in.
(1 cm)
5 in.
(12.7 cm)
Gooseneck Faceprint
1.18 in.
(3 cm)
Gooseneck Footprint
Universal Gooseneck
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
50
Electrical & Hardware
79. Guardian 2000
Large Standard Hinge, Prime Coated
New!
Ideal for heavy or high-traffic gates where reliability is essential.
Features:
Both sides mount to a flat weld surface
Rated at 3,000 lbs per pair
.
.
SHIPPING WEIGHT
PART NUMBER
6 lb (2.7 kg)
3500
Model 2000
Large Standard Hinge,
Prime Coated
80. Guardian 2001
Small Standard Hinge, Prime Coated
New!
Ideal for heavy or high-traffic gates where reliability is essential.
Features:
Both sides mount to a flat weld surface
Rated at 600 lbs per pair
.
.
SHIPPING WEIGHT
PART NUMBER
2.5 lb (1.1 kg)
3502
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278.
51
Hinges
81. Guardian 2040
Aluminum Standard Hinge
New!
Well suited for aluminum gates and for environments where rusting is a problem.
Features:
Both sides mount to a flat weld surface
Rated at 400 lbs per pair
.
.
SHIPPING WEIGHT
PART NUMBER
2.5 lb (1.1 kg)
3504
82. Guardian 2045
Aluminum Bolt On Hinge
Ideal for situations where welding is not desired
and rusting is a problem.
Features:
Perfect for vinyl fences.
Lead bearing capacity dependent on attachment
bolts used. (attachment bolts not included).
New!
.
.
SHIPPING WEIGHT
PART NUMBER
52
3 lb (1.4 kg)
3506
Model 2045
Aluminum Bolt On Hinge
Limited Warranty
To the original purchaser only: FAAC International, Inc., warrants for the time period indicated in each product’s description (or product title page) from the date of
invoice, the gate operator systems and other related systems and equipment manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., to be free
from defects in material and workmanship under normal use and service for which it was intended provided it has been properly installed and operated. FAAC
International, Inc.’s obligations under this warranty shall be limited to the repair or exchange of any part or parts manufactured by FAAC S.p.A. and distributed by
FAAC International, Inc. Defective products must be returned to FAAC International, Inc., freight prepaid by purchaser, within the warranty period. Items returned
will be repaired or replaced, at FAAC International, Inc.’s option, upon an examination of the product by FAAC International, Inc., which discloses, to the satisfaction
of FAAC International, Inc., that the item is defective. FAAC International, Inc. will return the warranted item freight prepaid. The products manufactured by FAAC
S.p.A. and distributed by FAAC International, Inc., are not warranted to meet the specific requirements, if any, of safety codes of any particular state, municipality, or
other jurisdiction, and neither FAAC S.p.A. nor FAAC International, Inc., assumes any risk or liability whatsoever resulting from the use thereof, whether used singly
or in combination with other machines or apparatus.
Any products and parts not manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., will carry only the warranty, if any, of the manufacturer. This
warranty shall not apply to any products or parts thereof which have been repaired or altered, without FAAC International, Inc.’s written consent, outside of FAAC
International, Inc.’s workshop or altered in any way so as, in the judgment of FAAC International, Inc. , to affect adversely the stability or reliability of the product(s) or
has been subject of misuse, negligence, or accident, or has not been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions or has
been operated under conditions more severe than, or otherwise exceeding, those set forth in the specifications for such product(s). Neither FAAC S.p.A. nor FAAC
International, Inc., shall be liable for any loss or damage whatsoever resulting, directly or indirectly, from the use or loss of use of the product(s). Without limiting the
foregoing, this exclusion from liability embraces a purchaser’s expenses for downtime or for making up downtime, damages for which the purchaser may be liable to
other persons, damage to property, and injury to or death of any persons. Neither FAAC S.p.A. nor FAAC International, Inc., assumes nor authorizes any person to
assume for them any other liability in connection with the sale or use of the products of FAAC S.p.A. or FAAC International, Inc. The warranty hereinabove set forth
shall not be deemed to cover maintenance parts, including, but not limited to hydraulic oil, filters, or the like. No agreement to replace or repair shall constitute an
admission by FAAC S.p.A. or FAAC International, Inc., of any legal responsibility to effect such replacement to make such repair, or otherwise. This limited warranty
extends only to wholesale customers who buy directly through FAAC International, Inc.’s normal distribution channels. FAAC International, Inc., does not warrant its
products to end consumers. Consumers must inquire from their selling dealer as to the nature and extent of that dealer’s warranty, if any.
This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for use. This warranty
shall not apply to products or any part thereof which have been subject to accident, negligence, alteration, abuse, or misuse or if damage was due to
improper installation or use of improper power source, or if damage was caused by fire, flood, lightning, electrical power surge, explosion, wind storm,
hail, aircraft or vehicles, vandalism, riot or civil commotion, or acts of God.
Terms of Sale
Important Notice
Prices shown in this list are based on the availability of items when the price list was printed. Prices are subject to change without notice. A minimum billing charge
of $25.00 net plus shipping cost will be billed for all orders received. Whenever possible, we suggest that you combine orders for all parts to surpass the minimum
cost. Product delivery time is subject to product availability. We are not responsible for any damages caused by a delay in shipping or product availability.
Pricing
All quoted prices for products are discounted according to the list price provided in our most current pricing manual. Discounts quoted do not apply to special order
items. Contact the factory for Dealer/Distributor pricing on special orders.
Credit Terms
We are pleased to offer one of the most generous discount terms available in the industry.
Our credit terms are net 30 days. Credit terms apply only to open accounts in good standing and only to merchandise. Balances remaining unpaid after the 30th
day are subject to a 1.75% per month finance charge. This is an annual cost to you of 21%. We compute the finance charge by applying the 1.75% rate to the
amount of the invoice past due for every month it is past due. The balance of your account is determined by taking the balance you owed at the end of the previous
billing cycle and subtracting all payments and credits received during the current billing cycle. Accounts past due forty-five (45) days will be placed on credit hold
until the account is brought up-to-date. Accounts over sixty (60) days past due that have no payment arrangements will be considered delinquent and subject to collection remedies.
The dealer/distributor will be responsible for all collection expenses. A current signed credit application must be provided before an account is opened,
subject to credit approval.
Delivery
All prices are quoted F.O.B. our factory. The purchaser is obligated to submit claims for damages or shortages of freight directly to the freight carrier within 30 days
when due to carrier neglect.
Material Returned for Credit or Repair
Goods may be returned for credit or exchange under certain conditions. You must contact the
factory for instructions and an authorization number. Merchandise returned for credit must be
current models, unused, and uninstalled - in new condition. Freight must be prepaid on all
authorized returns to FAAC International, Inc. The repair or replacement of product and parts is
subject to availability, and repair time is not guaranteed. We may have loaner operators available,
and they are subject to rental charges. All damages to loaner operators are the responsibility of
the Dealer/Distributor. Repaired or replaced parts carry a 90-day warranty. A 15% restocking
charge will be applied to goods returned for credit. Goods returned for repair will be handled
immediately when the following conditions exist:
1. Name and address of sender are enclosed with material.
FAAC International, Inc.
303 Lexington Avenue
2. The authorization number is clearly visible on the exterior of each package returned.
Cheyenne, WY 82007
3. A brief description of the problem and the requested repair is included with the shipment.
1-800-221-8278
We will not be responsible for poorly packaged equipment. Shipments of 70 lb or less should be
shipped via United Parcel Service.
Fax: (307) 632-8148
Web: www.faacusa.com
53
LIT-BIGPRC-05-5/23/05
Download PDF