Specification Sheet T8 Programmed Rapid Start Series Lamp Operation escent Ballast Project:

Specification Sheet T8 Programmed Rapid Start Series Lamp Operation escent Ballast Project:
EP2/32PRS/MV/MC/HE
Specification Sheet
Electronic Fluorescent Ballast
7/21/2014
Project:
2 Lamp
Standard Ballast Factor
Multi-volt
High Efficiency
Catalog#:
Approved by:
T8 Programmed Rapid Start Series Lamp Operation
Lamp Type
No. Of
Lamps
Lamp
Watts
Line
Voltage
Ballast
Factor
Input
Watts
Input
Current
(amps)
Power
Factor
THD
Ballast
Efficacy
Factor
2
32
120
0.88
57
0.48
0.98
<10%
1.54
2
32
277
0.88
56
0.21
0.98
<10%
1.56
2
30
120
0.90
54
0.45
0.98
<10%
1.67
2
30
277
0.90
53
0.20
0.97
<10%
1.70
2
28
120
0.90
52
0.44
0.98
<10%
1.73
2
28
277
0.90
51
0.19
0.97
<10%
1.76
F32T8*
F32T8/ES/30
F32T8/ES/28
F32T8/ES/25
FB32T8
FB31T8
FB28T8
2
25
120
1.00
50
0.42
0.98
<10%
2.00
2
25
277
1.00
49
0.18
0.97
<10%
2.04
2
32
120
0.88
57
0.48
0.98
<10%
1.54
2
32
277
0.88
56
0.21
0.97
<10%
1.56
2
31
120
0.88
55
0.46
0.98
<10%
1.62
2
31
277
0.88
54
0.20
0.97
<10%
1.66
2
28
120
0.90
52
0.44
0.98
<10%
1.73
2
28
277
0.90
51
0.19
0.97
<10%
1.76
* Primary Lamp Design
Ballast Specifications
• Ballast shall have a five-year warranty
• Ballast shall be UL certified
• Ballast shall be sound rated Class A
• Ballast shall be Class P Type 1 Outdoor
• Ballast shall have no PCB’s
• Ballast shall be Type HL, Type CC
• Ballast shall have a Lamp Current Crest Factor of <1.7
• Ballast shall meet ANSI Standards C62.41-2002
• Ballast shall comply with the limits of FCC Part 18 Class B (Residential) and Class A
• Ballast shall have a lamp operating frequency great than 40kHz
• Ballast shall have a 0oC minimum lamp starting temperature for primary lamp
• Ballast shall be Program Rapid Start
• Ballast shall be Series Lamp Operation
• Ballast shall have minimum Power Factor of 98% for primary Lamp operation
• Ballast shall operate within +/- 10% of the ballast specified line voltage at 60 Hz
• Ballast shall have a maximum case hot spot temperature of 90 Celsius
Side Ballast View
W
0.31
M
L
BLACK
WHITE
YELLOW
YELLOW
Dimensions
Bottom Ballast View
H
Wiring Diagram
W
L: 9.5”
W: 1.3”
H: 1.0”
M: 9.0”
• Specifications are subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
BALLAST
LAMP
LAMP
BLUE
BLUE
RED
RED
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement