RESISTANCE MEASURING INSTRUMENTS D07 RUGGED DIGITAL MICRO OHMMETER FOR LOW RESISTANCE MEASUREMENT The DO7 is a practical instrument for low resistance measurement, ideal for use in the workshop, field or test facilities. key feature DO7 True 4 terminal measurement eliminates lead resistance errors ■ 10 Amp measuring current ■ Rechargeable batteries with built-in charger ■ Measuring range 600 micro ohm...60 ohm ■ Resolution 0.1 micro ohm on 600 micro ohm range ■ 0.8" LED display daylight viewable ■ Auto average of forward and reverse measurement ■ charger will boost charge to 90% of full charge, switching Remote start socket ■ automatically to a trickle maintenance charge. Warning LEDs All solid state design ■ illuminate when an open circuit lead condition is detected. A front Wide range of leads and accessories available ■ panel socket provides a serial RS232 output for connection to an RS232 printer output ■ It is of rugged construction in a sealed ABS plastic case with lid and carrying handle. The DO7 has many advanced features, including protection up to 415 volts rms at the measuring terminals, digital calibration and long scale length, 6000 count. Rechargeable batteries mean real portability with more than 1 hour of continuous operation on the lowest ranges, and 20 hours on all others. Battery charge indicators are provided. The internal external printer or PC, and a socket is also provided for the connection of an external start switch, e.g. a foot switch. The DO7 is supplied ready for use with batteries, mains cord and test leads, no extras are normally necessary. For special lead sets we offer a variety of different styles which are listed on the accessories page, together with calibration standards. Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW United Kingdom Tel: +44 (0) 191 586 3511 Fax: +44 (0) 191 586 0227 Email: email@example.com Web: www.cropico.com D07 SPECIFICATIONS Range Resolution Typical Current Accuracy at 20°C ±5°C, 1 Year Temp Coefficient/°C 60Ω 6Ω 10mΩ 1mA ±(0.15% Rdg +0.05% FS) 40ppm Rdg + 30ppm FS 1mΩ 10mA ±(0.15% Rdg +0.05% FS) 40ppm Rdg + 30ppm FS 600mΩ 100µΩ 100mA ±(0.15% Rdg +0.05% FS) 40ppm Rdg + 30ppm FS 60mΩ 10µΩ 1A ±(0.15% Rdg +0.05% FS) 40ppm Rdg + 30ppm FS 6mΩ 1µΩ 10A ±(0.2% Rdg +0.01% FS) 40ppm Rdg + 30ppm FS 600µΩ 0.1µΩ 10A ±(0.2% Rdg +0.2% FS) 40ppm Rdg + 250ppm FS Measurement Dimensions 4 Terminal Kelvin / Thomson principle eliminates errors due to lead resistance. Open circuit measurement voltage = 2V dc 343mm x 327mm x 152mm (W D H) approx Mass Display 8kg approx 0.8” LED 6000 count with automatic decimal point and polarity indication Protection 415 Vrms maximum at input terminals Ranges Calibration 6 push button selected with LED indication Digital, security key protected Terminals 6mm binding posts accept spade tags and 4 mm banana plugs Battery Sealed lead acid, rechargeable cells giving a minimum of 1 hour of Working Temperature continuous measurement on the lowest 10 amp ranges and 20 0°C to 40°C rel. humidity 80% max. non-condensing Storage Temperature hours on all other ranges. Internal charger with battery state indicator -20 to +50°C Average Mains Supply Automatic average and display of measurement with forward and reverse current 100 / 120 / 220 / 240 Volts +10% - 13% 47Hz to 63Hz. max 80VA Safety IEC 1010 Protective Class 1 D07 Options Code Item CB03 Lead bag attaches to lid of DO7, must be ordered with DO7 DO7-RS Remote start plug FS01 Remote start foot switch HS01 Duplex handspikes with 3 metre lead length HS01-RS Duplex handspikes with 3 metre lead length with remote start button HS02 Duplex handspikes with 3 and 15 metre lead length HS02-RS Duplex handspikes with 3 and 15 metre lead length with remote start button LS03 Lead set with 3 metre leads terminated in large Kelvin clips type KC3 LS04 Lead set with 3 metre and 15 metre lead length terminated in large Kelvin clips type KC3 LS05 Lead set with 4 x 1 metre leads terminated in banana plugs, 4 x Crocodile clips, 4 x test probes and 2 x Kelvin clips type KC1 in miniature Kelvin clips type KC2 MTS2 Calibration standard RSL01 RS232 cable Seaward test and measurement companies include: SEAWARD CLARE CROPICO RIGEL SEAWARD G R O U P INDUSTRIAL SAFETY INSTRUMENTS PRECISION INSTRUMENTS MEDICAL PORTABLE ELECTRICAL SAFETY INSTRUMENTS Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: firstname.lastname@example.org Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.