TP-LINK Archer D7b modem router Quick Installation Guide

Below you will find brief information for modem router Archer D7b. The modem router Archer D7b is a dual-band wireless router with ADSL2+ modem functionality. It provides a high-speed internet connection and supports 2.4GHz and 5GHz wireless networks. It also offers a variety of features, including parental controls, guest network access, and VPN support. The modem router Archer D7b can be setup with either the provided Resource CD or through a web-based interface.

PDF Download
Document
TP-LINK Archer D7b Quick Installation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router
  • 2.4GHz and 5GHz wireless networks
  • Supports up to 1750Mbps speeds
  • Built-in ADSL2+ modem
  • 4 Gigabit Ethernet ports
  • Web-based management interface

Frequently asked questions

For Windows 7: Click “Start -> Control Panel -> Network and Internet -> View network status -> Change adapter settings”. Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.

Check your cables and make sure they are all plugged in correctly, including the telephone line, Ethernet cables and power adapter. Check to see if you can log on to the Web-based management page of the modem router. The default address of the Web-based management page is http://tplinkmodem.net. If you can, try the following steps (If you can not, please refer to T1 to configure TCP/IP Properties and then try to access the Internet again.) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please replace them with the correct settings and try again. If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG. Please contact our Technical Support if the problem still exists.

Once the modem router is reset, the current settings will be lost and you will need to reconfigure the modem router. We strongly suggest you back up the current settings before resetting the modem router. For more information, please refer to 4.23.6 Backup & Restore on User Guide. With the modem router powered on, use a pin to press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.
Preparing document for printing…
0%