G7823
G 7823 – PG 8528
Miele washer-disinfectors
for CSSDs and hospitals
Miele Professional –
Never be satisfied with less!
Dr. Markus Miele, Dr. Reinhard Zinkann
Managing Directors and Co-Proprietors
Miele & Cie. KG, Gütersloh
Dear clients,
For more than 50 years, Miele Professional has been developing
innovative systems for the cleaning, disinfection and sterilisation of
medical instruments. Everything started with a washer for surgical
instruments and now, 50 years on, Miele Professional can claim
to be a leading system provider in the field of medical technology,
offering washer-disinfectors, large steam sterilisers, software
solutions and a comprehensive advisory, planning and service
package to CSSDs.
Countless innovations of the past decades and future development
work is characterised by Miele's adherence to quality and solutions
which closely reflect the needs of clients.
And, moving forward, customers can expect the best possible results
in terms of economic operation and energy efficiency. In this, Miele
sees its clients as partners and looks forward to mutually beneficial
cooperation based on trust.
Quality 'Made by Miele' and excellent service.
Never be satisfied with less!
2
Comprehensive. Coordinated.
A comprehensive approach to safety
Innovative washer-disinfectors with
customisable features.
Miele washer-disinfectors offer versatile and
comprehensive solutions for the machinebased reprocessing and thermal disinfection
of surgical instruments and accessories. A
wide range of inserts, specially designed
programmes and efficient water pretreatment ensure the thorough, effective
and material-friendly cleaning of both
internal and external instrument surfaces,
catering for a wide range of applications in
hospitals and CSSD units.
Advice, financing, service
and validation of the highest
Miele quality.
Miele's advisory team and its blanket
coverage makes for an individual,
customised approach – from dependable
validation through to beneficial service
contracts and attractive financing. Full-range
service from one single supplier – based on
decades of experience.
Powerful large steam steriliser for the
fast reprocessing of instruments and
textiles.
By offering simple controls, short cycle
times and excellent drying results, Miele's
large steam sterilisers guarantee both fast
and safe sterilisation.
Gap-free process documentation,
simple instrument management, highlevel automation and an intuitive user
interface.
A professional sterile supply management
system supports effective and timesaving work patterns and, thanks to a
modular approach, covers all stages of
the entire instrument reprocessing cycle.
The integration of washer-disinfectors and
sterilisers into comprehensive process
documentation systems offers greater legal
security and improves quality standards in
modern CSSDs.
3
4
Customised systems in three size categories:
Miele stands for innovation in all aspects
concerning the systematic cleaning,
disinfection and sterilisation of surgical
instruments: System components, processes,
after-sales service – for the flexible, reliable
and efficient use of validatable machinebased processes.
Please do not hesitate to contact us if you
require further information.
• Planning negotiations
• Advisory services / Expertise
• Conceptualisation
• Economic feasibility calculations
• Installation plans
Explanation of symbols
Contents
AE
AP
AV
BO
D
D/EL
EL
GS
KD
ORTHO
OXI
PT
TA
Cleaning programmes ............................................................................................... Page 6
Service ....................................................................................................................... Page 7
Washer-disinfectors G 7823 and G 7824 .................................................................. Page 8
Mobile units and inserts ............................................................................................ Page 16
Washer-disinfectors G 7825 and G 7826 ................................................................. Page 22
Mobile units and inserts ............................................................................................ Page 30
Washer-disinfectors PG 8527 and PG 8528 ............................................................ Page 38
Mobile units and inserts ............................................................................................ Page 52
Transport trolleys ....................................................................................................... Page 70
Stainless-steel panelling
Drain pump
Dump valve
Boiler
Steam heating
Steam/electric convertible
Electric heating
Door door
Service
ORTHOVARIO programme
OXIVARIO programme
PROFITRONIC controls
Drying unit
This logo highlights products with special
properties only available from Miele.
cf. separate brochure:
Miele's new PG 8821, PG 8822, PG 8825, PG 8830 container and
trolley washers for reprocessing of transport trolleys, sterile supply containers,
theatre shoes and beds.
5
Cleaning programmes
Miele innovations for particularly critical
cases. Milestones in the optimisation of
cleaning results:
1994
2004
2005
6
The VARIO TD method can now be seen
as the standard programme for routine
instrument cleaning and disinfection,
achieving good removal of protein-based
contamination (blood, secretion) from
instruments which do not pose a particular
challenge. Thermal disinfection takes
place at > 90°C for 5 minutes. To protect
instruments, the final rinse is performed
ideally with demineralised water without
surfactant. The VARIO TD-AN programme
with its modified parameters is available
to reprocess thermo-stable anaesthetic
instruments.
– Intensive cleaning below
protein denaturation temperature
– Disinfection according to EN ISO 15883
– Exceptional material compatibility
OXIVARIO
Special programme for the critical
instruments used in trauma surgery as well
as high-frequency cauterising instruments
requiring higher standards of cleaning.
– Excellent cleaning and removal of
organic soil.
– Time-saving as there is no need for
pre- and post-treatment
OXIVARIO PLUS
Special programme to prevent the
iatrogenic spread of vCJD according to
guidelines published by the task force set up
by Germany's Robert Koch Institute.
– Excellent cleaning and removal of
organic soil
– Time-saving as there is no need for
pre- and post-treatment
ORTHOVARIO
Special programme for orthopaedic
instruments including motor systems
and other medical products made from
aluminium.
– Excellent cleaning performance
– Good material compatibility even on
instruments sensitive to alkalinity
Service
in highest Miele quality - guaranteed!
Highly skilled Miele after-sales service
Services,
Service contracts
,
Miele offers a service package which is
closely geared to the requirements of
CSSDs.
A team of skilled and knowledgeable
medical product advisers is available to
support clients with their expertise both
during the planning phase and later during
operation.
In addition to a wide range of services,
Miele service engineers also provide
assistance in optimising and redesigning
cleaning processes and reprocessing
methods. With its product lineup, Miele
always tries to contribute towards
simplifying procedures in hospitals and
making them safer and more efficient.
In order to guarantee maximum forward cost
visibility, Miele recommends that its clients
take out service contracts:
• Inspection
• Maintenance
• Full service maintenance
• Blanket service coverage combined with
fast response
• 90% of service calls result in first-time
fixes
• Key genuine spares available for 15 years
after discontinuation of series production
Validated performance
Miele also offers a series of process checks
performed by highly qualified Miele medical
product engineers in accordance with the
relevant legislation and standards as well
as national guidelines and good-practice
recommendations:
• Initial validation consists of installation,
operation and performance qualification
after machine installation
• Revalidation (repeat performance
qualification) is generally necessary
every 12 months, after maintenance,
repairs or after any modifications to
installation or operation parameters.
It is not without reason that Miele's aftersales service operation has been acclaimed
for many years in succession for its
excellence (in an annual survey performed
by ServiceBarometer AG, Munich.
7
8
Washer-disinfectors
G 7823 and G 7824
The G 7823 and G 7824 washer-disinfectors
were specifically designed to meet the
needs of smaller and medium-sized
hospitals and outpatient surgeries. With
a width of only 900 mm, these machines
are the ideal proposition in cases where
space is at a premium. Depending on the
installation site and hygiene requirements,
machines are available as single-door frontloading models (G 7823) or as two-door
barrier machines (G 7824) for installation in
a diaphragm wall.
Flexible solutions for the central and
decentral reprocessing of instruments
Miele's G 7823 and G 7824 washerdisinfectors offer a wide range of installation
options, tailored individually to the needs
of hospitals and outpatient surgeries. This
allows units to be installed both centrally in
specialist departments for decentralised
instrument reprocessing or centrally in
CSSD for coping with larger volumes of
instruments.
Specifications
WD
Unit width/depth
Doors
Cabinet
Useable dimensions H/W/D
Useable cabinet volume
approx.
Capacity pro cycle
G 7823/G 7824
900/770 mm
Bottom-hinged door(s)
510/530/620 mm
168 l
8 DIN mesh trays
3 AN sets
2 MIC sets
G 7825/G 7826
900/750 mm
Bottom-hinged door(s)
683/541/610 mm
225 l
10 DIN mesh trays
4 AN sets
2 MIC sets
PG 8527 / PG 8528
1150/870 mm
Vertical-rise door(s)
675/650/800 mm
351 l
15 DIN mesh trays
7 AN sets
3 MIC sets
9
Machine features and specifications
Infeed side
Versions
• G 7823: Front-loading unit with single
bottom-hinged door
• G 7824: Two-door barrier washerdisinfector for installation in a diaphragm
wall
Design
• Stand-alone and side-by-side
installation
• Width 900 mm
• Modular approach with customised
features to meet individual requirements
• Single-chamber system for washing,
disinfection and drying
• Service-friendly design
• Heater elements outside wash chamber
• Low heat and sound emissions thanks to
double insulation
Capacity per cycle
• 8 DIN mesh trays
or 3 DIN containers
150 x 300 x 600 mm
or 1 DIN container
300 x 300 x 600 mm
and 1 DIN container 150 x 300 x 600 mm
or 3 AN sets
or 2 MIC sets
Infeed side
Cleaning technology
• Hygienic freshwater system with fresh
water intake in each programme stage
• Cleaning, disinfection and drying in a
closed, single-cabinet system
• 2 spray arms in cabinet for thorough
cleaning of instrument surfaces
• Spray arms with high water jet impact
force
• Full water jet access, ensuring optimum
results
• Thorough cleaning of lumens with injector
system
• Direct docking of mobile units to water
circuit
Technical data Page 13-15
10
Standard machine features
Infeed side
Standard features
• 2 powerful circulation pumps
• Triple filtration with large surface filter,
coarse filter and micro-fine filter
• Filter in inlet hoses
• Flowmeter to monitor water intake
quantities
• 1 dump valve
Dispenser systems
• 2 dispenser pumps for liquid detergent
and acidic agents
• Extendible (further 3 internal
dispenser pumps retrofittable)
Water softener
• High-capacity water softener (integratable)
Drainage
• 2 drain pumps
Controls
• Freely programmable controls
PROFITRONIC
• 64 programme slots
– 13 standard programmes
– 8 service programmes
– 43 vacant programme slots
• User interface with local-language display
• Display of programme selection and
programming dialogs, countdown time,
faults and operating hours.
• Compilation of new programmes using
machine controls or using PC/laptop via
optical interface
Outfeed side
Interfaces
• Serial RS 232 interface for process
documentation and remote service
• Optical interface for service and
maintenance
Printer
• Integrated 6-pin printer to record
key process parameters
Safety devices
• Electric door lock
• Programme recontinuation in event of
power outage
• Peak-load negotiation
• Optical and acoustic signal at end of
programme
• 2 sensors, 1 each for temperature control
and monitoring
• Port for simple positioning of sensors in
the wash cabinet for process validation
• Sensors in cabinet and a magnetic strip on
mobile units for automatic assignment of
programmes to mobile units
11
Modular machine concept
Optional extras
Infeed side
12
Infeed side
SBWR/3
Roller plinth/floor tray for G 7823
• Roller plinth/floor tray
• Castors allow machine to be
pulled forward for servicing
• H 100, W 900, D 768 mm
TA-S1
Drying unit (optional)
• Hot-air drying unit (electrically
heated)
• Low-maintenance 3-phase motors
with side-channel compressor
• Temperature range
60–115oC
• Time freely adjustable,
1-240 mins.
• 1 pre-filter EU 4,
filter rating > 95%,
filter life 200 h
• 2 particulate filters H 13, filter
rating > 99.992%,
filter life 500 h
SBW/4
Plinth/floor tray
• Frame with built-in floor tray
• Cut-outs for supplies and utilities
• A continuous plinth/floor tray can
be provided on site when multiple
machines are installed in a row.
• For G 7824
• H 100, W 900, D 768 mm
DK 23/24 steam condenser
• Steam condenser
(heat exchanger)
• No water consumption when
connected to on-site cooling water
circuit, max. water pressure 8 bar
Machine versions,
components, accessories
MAV 23/24
Top-box panelling
• Stainless-steel panelling
with lockable service hatches to
conceal steam condenser
• MAV without cover panel
• Panelling between top box and
ceiling must be provided on site.
• H 512, W 900, D 768 mm
Cover
• Top cover for MAV 23/24
DE 23 Lid
• Lid for G 7823 when installed
without steam condenser
(not suitable for G 7824)
Retrofit kits
• OXIVARIO
(OXI-NRS 1-G 7823/24)
• ORTHOVARIO (ORTHO)
Note
An emergency door release
must be fitted if the G 7824 is
installed without top panelling
(MAV). The required parts
are available from Spares (cf.
Conversion Instructions, Mat. no.
6476390).
Retrofit kits and on-site installation
by Miele Service
G 7823
Features
Mat. no.
Art. no.
Electric
AE PT EL AP
6174400
62.7823.24
Steam
AE PT D AP
6174420
62.7823.14
Steam/Electric
AE PT D/EL AP
6174430
62.7823.34
G 7824
Electric
AE PT EL AV
6174350
62.7824.21
Electric
AE PT EL AP
6174360
62.7824.24
Steam
AE PT D AV
6174370
62.7824.11
Steam/Electric
AE PT D/EL AV
6174380
62.7824.31
Accessories
WES-GE
Water softener
6174450
69.2020.01
DOS 10/30
Built-in dispenser
6224670
69.2250.04
DOS 60/30
Built-in dispenser
6224680
69.2250.05
PRT/1
Built-in printer
6224720
69.2211.03
OxiVario MODULE
OXIVARIO – installed
6444140
69.2250.06
ORTHOVARIO module (incl. OXIVARIO module)
ORTHOVARIO – installed
6946150
69.2250.08
ML
5 magnets*
5267440
69.7457.02
SBWR/3
Roller plinth/floor tray
6174480
69.3710.06
SBW/4
Plinth/floor tray
6174490
69.3710.07
TA-S1
integrated. Drying unit
6174440
69.2010.03
DK 23/24
Steam condenser
6600610
69.2300.06
MAV 23/24
Top-box panelling
6805170
69.2100.09
Cover
For MAV 23/24
6805180
69.2100.10
DE 23
Lid for G 7823
6174470
69.2161.01
OXI - NRS 1 - G 7823/24
OXIVARIO retrofit kit, including installation
6444690
69.2310.05
ORTHO (excl. OXIVARIO)**
ORTHOVARIO retrofit kit, including installation
6930680
C.f. Page 5 for explanation of symbols
* for automatic mobile unit recognition. Not included with mobile units for G 7823/G 7824.
** presuming installation of OxiVario
13
Technical data
Washer-disinfectors
G 7823 (1 door)
G 7824 (2 doors)
Front-loading unit with bottom-hinged door
•
–
Barrier model with bottom-hinged doors
–
•
Single/multiple installations
•
•
Freshwater system, max. temperature 93°C
•
•
300/500*
300/500*
PROFITRONIC, freely programmable
•
•
64 programme slots
•
•
Electric door lock
•
•
Peak-load negotiation
•
•
Direct mobile unit docking for cleaning and drying of lumened instruments
2 circulation pumps [Qmax. l/min]
••
Controls/programmes
Serial interface for process documentation
•
•
Magnetic strip for automatic mobile unit recognition
•
•
Remote service enabled
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) 4°dH
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) 4°dH
•
•
Water connections
1 x demineralised water, 2–10 bar flow pressure (200–1000 kPa)
••
3 inlet hoses ½" with ¾" threaded union
•
Drain valve DN 50, odour trap to be fitted on site
•
•
•
2 drain pumps, odour trap to be provided on site, drain hose DN 22
o
o
3 N AC 400 V 50 Hz
•
•
Heating [kW]
9.0
9.0
Circulation pump [kW]
0.4/0.8
0.4/0.8
Total rated load without drying unit [kW]
10.2
10.2
Total rated load with drying unit [kW]
10.2
10.2
Fuse rating [A]
3 x 16
3 x 16
3 N AC 400 V 50 Hz
•
•
Circulation pump [kW]
0.4/0.8
0.4/0.8
Total rated load without drying unit [kW]
1.5
1.5
Total rated load with drying unit [kW]
4.5
4.5
Fuse rating [A]
3 x 16
3 x 16
Electrical connection: Electrically heated
Electrical connection: Steam heating
Steam connection G ½" (DN 15)
•
•
Operating pressure 250–1000 kPa
•
•
Compressed air connection 600–1200 kPa
•
•
3 N AC 400 V 50 Hz
•
•
Heating [kW]
9.0
9.0
Circulation pump [kW]
0.4/0.8
0.4/0.8
Total rated load with drying unit [kW]
10.2
10.2
Fuse rating [A]
3 x 16
3 x 16
Steam connection G ½" (DN 15)
•
•
Operating pressure 250–1000 kPa
•
•
Compressed air connection 600–1200 kPa
•
•
Electrical connection: Steam / Electric heating (convertible)
* 300 l for machine spray arms / 500 l for mobile unit couplings
14
Technical data
Washer-disinfectors
G 7823 (1 door)
G 7824 (2 doors)
1 x DOS 10/30 dispenser pump for liquid acidic agents
•
•
1 x DOS 60/30 dispenser pump for liquid detergent
•
•
2 x 5 l supply containers
•
•
Setting options for 2 x 5 l supply canisters
•
•
Dispenser systems
Further connection options, internal pumps (optional)
1 x DOS 10/30 dispenser pump for surfactants and neutralising agents
o
o
1 x DOS 60/30 dispenser pump for detergent or disinfectant
o
o
Drying unit/side-channel compressor
Fan motor [kW]
0.9
0.9
Heater bank [kW]:
3.6
3.6
Total rated load [kW]
4.5
4.5
Air throughput [m3/h]
125
125
Temperature selection in 1°C increments
60–115
60–115
Time selection in 1-minute increments
1–240
1–240
1 pre-filters EU 4, filter rating > 95%, filter life 200 h
•
•
2 particulate/HEPA filters H 13, filter rating > 99.95% (DIN EN 1822-1998), filter life 500 h
•
•
External dimensions H incl. plinth/tray and MAV 23/24 (top panelling installation kit) [mm]
1928
1928
External dimensions W/D [mm]
900/768
900/768
Useable cabinet dimensions H/W/D [mm]
510/530/620
510/530/620
Overall cabinet dimensions H/W/D [mm]
700/530/660
700/530/660
Docking height above floor (with plinth) [mm]
865
865
Weight [kg]
350
370
•
•
VDE, VDE-EMC, MDD CE 0366
•
•
IP X1 if MAV with coverplate fitted, otherwise IP 20
•
•
Dimensions, weight
Outer casing
Stainless steel (AE)
Test certificates
• = Standard, o = Optional
15
Mobile units with 1–3 levels
E 550 mobile unit
• Mobile unit with 1 level
• For use with various inserts
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 250, W 530, D 645 mm
• Loading dimensions: H 481, W 482,
D 587 mm
Mat. no. 6415970
Art. no. 69.5550.01
E 550 with E 730 insert
• Mobile unit and insert for 20 theatre shoes
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 298, W 530, D 645 mm
E 730
(no illustration, description on P. 32)
Mat. no. 5271020
Art. no. 69.5730.01
Mat. no. 7460260
Art. no. 69.5525.03
16
E 484
Mat. no. 5109190
Art. no. 69.5484.01
E 487
(Description on Page 32)
Mat. no. 5109250
Art. no. 69.5487.01
E 550 mobile unit with E 484 insert
(no illustration, description on P. 32)
• For various utensils
E 525/2 mobile unit with
drying connection
• Mobile injector unit with 3 levels,
extendible
to 4 levels (with E 702)
• Vertical clearance (bottom to top):
80/80/219 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 298, W 530, D 645 mm
E 484 insert with E 487
• E 484 can be fitted with 4 x E 487 holders
each for 4 theatre shoes
Height 280 mm
• Dimensions E 487
H 280, W 464, D 10 mm
E 525/2 mobile unit with E 702 module
• Mobile unit with 4 levels
• Vertical clearance (bottom to top):
80/80/90/80 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 458, W 530, D 645 mm
Illustration shows sample load with
8 x E 142 DIN mesh trays
E 702 module
• Level 5 for E 701/2 and E 525/2 mobile
units
• For 2 DIN mesh trays
• H 160, W 530, D 560 mm
Mat. no. 5221490
Art. no. 69.5702.01
• Max. load per mesh tray 10 kg
Mobile units with 3–4 levels
Mobile units for containers
E 524/2 mobile injector unit
• Mobile unit with 3 levels
• Vertical clearance per level 125 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 390, W 530, D 645 mm
Illustration shows sample load with
6 x E 142 DIN mesh trays
E 555/2 mobile injector unit
• Mobile unit with 2 levels
• Vertical clearance (bottom to top):
210/219 mm
• Lower level W 487, D 592 mm
• Upper level W 495, D 548 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 298, W 530, D 645 mm
Mat. no. 7460250
Art. no. 69.5524.03
Mat. no. 7460290
Art. no. 69.5555.03
E 750 insert (not illustrated)
Illustration shows sample load with E 135
containers for baby bottles and E 364
inserts for teats.
E 750 frame required when using E 135
container for baby bottles.
Mat. no. 5567510
Art. no. 69.5750.01
E 936 insert for boom lamp handles
• For various boom lamp handles
• 15 receptacles
• L 500, W 245, H 90 mm
Mat. no. 7759480
Art. no. 69.5936.01
E 703/1 top module for
E 525/2 and E 701
• Injector module for 7 lumened
instruments
• H 170, W 80, D 555 mm
(cf. P. 31 for items included)
E 527/2 mobile injector unit
• Mobile unit for 1 DIN container and 1 lid
300 x 600 mm and 150 x 600 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 500, W 530, D 645 mm
E 528/2 mobile injector unit
• Mobile unit for 3 small DIN containers
and lids 150 x 600 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 500, W 530, D 645 mm
Mat. no. 7025350
Art. no. 69.5703.02
Mat. no. 7460270
Art. no. 69.5527.03
Mat. no. 7460280
Art. no. 69.5528.03
17
Solutions for MIS instruments
E 526/1 mobile unit with
drying connection
• Mobile unit with 2 levels for minimally
invasive instruments and accessories
• Vertical clearance (bottom): 100 mm
• Max. length of minimally invasive
instruments: 600 mm
• Connection for hot-air drying
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 498, W 530, D 645 mm
Illustration shows E 526/1 with E 451 mesh
tray for sundry small items, insert for fibreoptics,
E 457 mesh tray for separable minimally
invasive instruments.
Supplied as standard with:
• 3 x E 336 MIBO injector sleeves for
pipettes/MIS instruments Ø 11 mm
• 2 x E 362 blanking screws
• 15 x E 442 irrigation sleeve
for minimally invasive instruments,
Ø 4–8 mm
• 5 x E 443 irrigation sleeve
for minimally invasive instruments,
Ø 8-8.5 mm
• 1 x E 444 insert/spiral rack for fibre optic
cables or tubing
• 1 x E 445, 12 caps for irrigation sleeves/
minimally invasive instruments Ø 6 mm
• 1 x E 446, 12 caps for irrigation sleeves/
minimally invasive instruments Ø 10 mm
• 3 x E 447 female adapters,
for male LuerLock
• 6 x E 448 silicone hoses,
300 mm long, 5 x 1.5 mm
• 5 x E 449 male adapters,
for female LuerLock
• 1 x E 451 insert 1/6 mesh tray,
H 55, W 150, D 225 mm
• 3 x E 452 injector nozzles, 2.5 x 60 mm
• 8 x E 453 injector nozzles
4.0 x 110 mm with spring supports
• 6 x E 454 nozzles
for trocar sleeves, 10-15 mm
• 4 x E 456 spring stays
for MIS instruments
• 3 x E 464 receptacles
for E 454 injector nozzle
• 2 x E 472 clamps for injector nozzle,
Ø 4.0 mm
• 2 m silicone hose, Ø 5 mm,
Part no. 4822830
Mat. no. 7026560
Art. no. 69.5526.02
Further accessories on Page 64
18
Mobile unit for MIS instruments and reprocessing
dental transmission instruments
E 574 mobile unit with
drying connection
• Modular system for approx. 2 MIS OP sets
• For lumened instruments in 3 modules
with integrated nozzles/adapters
(not included)
• Applications:
E 903/1 module for short
MIS/urology instruments
E 905/1 module for short
MIS instruments
E 906/1 module for long
MIS instruments
3 x E 444 drums for fibre optics and
irrigation hoses
1 x E 460 insert for rigid fibre optics and
1 x E 457 insert for separable
MIS instruments or
1 x E 142 DIN mesh tray
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 500, W 530, D 645 mm
Supplied as standard with:
• 3 x E 447 female adapters, for male
LuerLock
• 6 x E 362 blanking screws
Mat. no. 6802840
Art. no. 69.5574.01
Description of modules
on Pages 62/63
Further accessories on Page 64
19
Mobile unit for MIS instruments
Geuder AG recommends that their current
range of instruments be reprocessed in a
Miele washer-disinfector.
E 529 mobile unit with
drying connection
• For 4–5 OP sets (cataracts)
• Mobile unit with 3 levels for minimally
invasive instruments and accessories:
• 2 levels for mesh trays
• 1 level with 16 injector nozzles (hose and
male LuerLock) or
30 injector nozzles (15 male and 15 female
LuerLock adapters)
• Connection for E 478 on feed pipe
• Vertical clearance (bottom to top):
124/114.5/160 mm
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 471, W 530, D 645 mm
Illustration shows E 529 with 4 x E 142
DIN mesh trays with E 476 receptacles
and E 477 end stoppers for microinstruments.
Mat. no. 6415950
Art. no. 69.5529.01
Further accessories for MIS instruments on
Page 65.
20
FP ED
• Stainless-steel filter insert for E 478/1
• Diameter 30 mm
Mat. no. 7290770
Art. no. 69.7512.02
E 478/1 adapter
• For 4 narrow-lumened cannulae (Sautter
cannulae)
Mat. no. 7292920
Art. no. 69.7478.02
Mobile unit for MIS instruments
E 515/1 mobile unit with
drying connection
• For approx. 3 AN sets or 9 breathing
tubes, max. length 1.5 m, and various
accessories
• Tubes wound around spiral drum
• E 430 mesh tray
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 500, W 530, D 645 mm
Supplied as standard with:
• 9 spring-loaded supports Ø 12 mm
for breathing tubes, max. 1.5 m
• 3 x E 433 holders for silicone breathing
tubes
• 6 x E 466 injector nozzles for breathing
bags
• 15 x E 496 injector nozzles, e.g. for
Guedel or endotracheal tubes
• Magnetic strip for automatic mobile unit
recognition (excl. magnets ML)
• 3 x E 495 injector nozzles
• 1 x E 431 injector nozzle for bellows
• 1 x E 430 1/3 mesh tray for sundry small
items
• 1 x E 434 holder for paediatric breathing
tubes
• 1 x E 432 holder for concertina breathing
tubes
E 466 accessory for AN mobile unit
• Injector nozzle for breathing bags,
8 x 333 mm
Mat. no. 4966620
Art. no. 69.7466.01
E 496 accessory for AN mobile unit
(no illustration)
• Injector nozzle for intubation material,
4 x 120 mm
Mat. no. 5235490
Art. no. 69.7496.01
Mat. no. 7026590
Art. no. 69.5515.02
21
22
Washer-disinfectors
G 7825 and G 7826
In terms of size and capacity, G 7825 and
G 7826 washer-disinfectors represent the
mid-size range among the three Miele
series catering for CSSD applications. The
characteristic feature of this series is the
high throughput capacity of up to 10 DIN
mesh trays per cycle and an installation
footprint of only 900 mm (width) x 750 mm
(depth).
The illustration shows the E 701/2 mobile unit for 10 mesh trays with the E 702 top
module
Specifications
WD
Unit width/depth
Doors
Cabinet
Useable dimensions
Cabinet volumes
approx.
H/W/D Capacity pro cycle
G 7823/G 7824
900/770 mm
Bottom-hinged door(s)
510/530/620 mm
168 l
8 DIN mesh trays
3 AN sets
2 MIC sets
G 7825/G 7826
900/750 mm
Bottom-hinged door(s)
683/541/610 mm
225 l
10 DIN mesh trays
4 AN sets:
2 MIC sets
PG 8527 / PG 8528
1150/870 mm
Vertical-rise door(s)
675/650/800 mm
351 l
15 DIN mesh trays
7 AN sets
3 MIC sets
23
Machine features and specifications
Infeed side
Versions
• G 7825: Front-loading unit with single
bottom-hinged door
• G 7826: Two-door barrier washer-disinfector
for installation in a diaphragm wall
Capacity per cycle
• 10 DIN mesh trays
or 4 DIN containers, 150 x 300 x 600 mm
or 2 DIN containers, 300 x 300 x 600 mm
or 4 AN sets
or 2 MIC sets
Design
• Stand-alone and side-by-side
installation
• Width 900 mm
• Modular approach with customised
features to meet individual requirements
• Single-chamber system for washing,
disinfection and drying
• Service-friendly design
• Low heat and sound emissions thanks to
double insulation
Cleaning technology
• Hygienic freshwater system with fresh
water intake in each programme stage
• Cleaning, disinfection and drying in a
closed, single-cabinet system
• 2 spray arms in cabinet for thorough
cleaning of instrument surfaces
• Spray arms with high water jet impact force
• Full water jet access, ensuring optimum
results
• Thorough cleaning of lumens with injector
system
• Direct docking of mobile units to water
circuit
Infeed side
Standard features
• 2 powerful circulation pumps
• Triple filtration with large surface filter,
coarse filter and micro-fine filter
• Filter in inlet hoses
• Flowmeter to monitor water intake
quantities
• 1 dump valve
Dispenser systems
• 2 dispenser pumps for liquid detergent
and acidic agents
• Extendible (further 2 internal dispenser
pumps retrofittable)
Technical data Pages 28/29
24
Standard machine features
Infeed side
Water softener
• High-capacity water softener (external)
Drainage
• 2 drain pumps
Controls
• Freely programmable controls
PROFITRONIC
• 64 programme slots
– 17 standard programmes
– 8 service programmes
– 39 vacant programme slots
• User interface with local-language
display
• Display of programme selection and
programming dialogs, countdown time,
faults and operating hours.
• Compilation of new programmes using
machine controls or using PC/laptop via
optical interface
Interfaces
• Serial RS 232 interface for process
documentation and remote service
• Optical interface for service and
maintenance
Printer
• Integrated 6-pin printer to record key
process parameters
Outfeed side
Safety devices
• Electric door lock
• Programme recontinuation in event of
power outage
• Peak-load negotiation
• Optical and acoustic signal at end of
programme
• 2 sensors, 1 each for temperature control
and monitoring
• Port for simple positioning of sensors in
the wash cabinet for process validation
• Sensors in cabinet and a magnetic strip on
mobile units for automatic assignment of
programmes to mobile units
25
Modular machine concept
Optional extras
Infeed side
SBW/2
Plinth/floor tray
• Frame with integrated stainlesssteel floor tray
• Cut-outs for steam and plumbing
connections, dump valve, dual
drain valve and floor tray drain
• A single floor tray can be provided
on site for machines installed in
a row.
• Plinth fascia (front and rear) with
8 mm recess, flush at sides
• H 100, W 900, D 734 mm
SBWR/2
Plinth/drip tray for G 7825
• Roller plinth/floor tray
• Castors allow machine to be
pulled forward for servicing
• For G 7825 with drain pump
• Utility supply access through
ceiling
• H 100, W 900, D 734 mm
26
Infeed side
PRT/1
Printer for process
documentation
• 6-needle printer and RS 232 serial
interface
• Paper format: 58 mm wide
• For installation on infeed side of
G 7825 or outfeed side of G 7826
• Recording of following parameters
during programme:
Date and Mach. no., Prog. no.,
prog. name, starting and finishing
time, dispensing concentration,
dispensing temperature and
pumps 1–4, target temperature
reached (wash/dry) with times, all
faults (e.g. 'water inlet'), all incidents
of manual intervention (start, stop,
power outage)
• For disinfection programmes:
Meets process parameters with
respect to temperature and
holding time
Machine versions,
components, accessories
DK 25/26
Steam condenser/
heat exchanger
• For G 7825/G 7826 with water
cooling (only dehumidified
air should be vented to air
conditioning system)
• Connection to on-site cooling
water circuit (no water
consumption), max. pressure 8 bar
• Or cold water supply (water
consumption)
• On-site installation
• Reduction of air discharge
temperature to approx. 30-35°C,
• Reduction in relative humidity to
approx. 60-70%
MAV 25/26
Installation kit/Top-box panelling
for steam condenser
• Service hatches, with lock, for
both sides of diaphragm wall,
stainless steel
• Ventilation grille on the infeed side
• Diaphragm wall panelling between
the top of the top-box panelling
and the ceiling must be provided
on site
• H 430, W 900, D 750 mm
MVA
Installation kit – Floor anchors
• 4 feet, fittings, plugs
• Required when machine is
installed without SBW/2
OXI-NRS1 – G 7825/G 7826
OXIVARIO
OXIVARIO retrofit kit for machines
from Serial no. 74305624 incl. onsite installation by Miele Service.
OXI-NRS2 – G 7825/G 7826
OXIVARIO
OXIVARIO retrofit kit for machines
from Mach. no. 53078029 to Mach.
no. 74305623, incl. OXI-NRS1 G 7825/G 7826 and on-site
installation by Miele Service.
DOS 10/30
Integrated dispenser pump
• For surfactant or neutralising
agent, 10 ml/30 secs.
• Complete with hoses and siphon
(330 mm) for 10 l
canisters
DOS 60/30
Integrated dispenser pump
• For liquid disinfectant or detergent,
60 ml/30 secs.
• Complete with hoses and siphon
(330 mm) for 10 l canisters
G 7825
Features
Mat. no.
Art. no.
Electric
AE PT EL AV
5267200
62.7825.20
Steam
AE TA PT EL AV
5277520
62.7825.21
AE TA BO PT EL AV
5277530
62.7825.22
AE TA PT EL AP
5544310
62.7825.24
AE TA GS PT EL AP
5769820
62.7825.27
AE TA BO PT EL AP
5430590
62.7825.25
AE BO PT D AV
5267170
62.7825.10
AE TA BO PT D AP
5430620
62.7825.15
AE TA PT EL AV
5277600
62.7826.21
AE TA GS PT EL AV
5769360
62.7826.18
AE TA BO PT EL AV
5277610
62.7826.22
AE TA BO GS PT EL AV
5769370
62.7826.19
AE TA PT EL AP
5331670
62.7826.24
AE TA BO PT EL AP
5331680
62.7826.25
AE TA BO GS PT EL AP
5769410
62.7826.28
AE BO PT D/EL AV
5267250
62.7826.30
AE TA BO PT D/EL AV
5277630
62.7826.32
AE TA BO GS PT D/EL AV
5769640
62.7826.37
AE TA BO PT D/EL AP
5331700
62.7826.35
AE TA BO OXI PT EL AV
6407800
62.7826.44
G 7826
Electric
Steam/Electric
OXIVARIO
Accessories
Features
Mat. no.
Art. no.
SBW/2
Plinth/drip tray for G 7825/G 7826
5238130
69.3710.02
SBWR/2
Plinth/drip tray, on castors for G 7825
5653130
69.3710.04
MVA
Fitting kit – Floor anchors for G 7825/G 7826
5318010
69.2100.04
DK 25/26
Steam condenser/heat exchanger
6600620
69.2300.05
MAV 25/26
Fitting kit – Top-box panelling for G 7825/G 7826
6600590
69.2100.08
OXI-NRS1 - G 7825/G 7826
OXIVARIO retrofit kit, including installation
6444680
69.2310.03
OXI-NRS2 - G 7825/G 7826
OXIVARIO retrofit kit, including installation
6458960
PRT/1
Printer for process documentation
5400800
69.2211.02
DOS 10/30
Retrofittable dispenser pump
5267410
69.2250.02
DOS 60/30
Retrofittable dispenser pump
5267420
69.2250.03
Chamber – ASI 316L (1.4404) grade stainless steel (optional)
C.f. Page 5 for explanation of symbols
27
Technical data
Washer-disinfectors
G 7825 (1 door)
G 7826 (2 doors)
Front-loading unit with bottom-hinged door
•
–
Barrier model with bottom-hinged doors
–
•
Single/multiple installations
•
•
Freshwater system, max. temperature 93°C
•
•
300/400*
300/400*
PROFITRONIC, freely programmable
•
•
64 programme slots
•
•
Electric door lock
•
•
Peak-load negotiation
•
•
Direct mobile unit docking for cleaning and drying of lumened instruments
2 circulation pumps [Qmax. l/min]
••
Controls/programmes
Serial interface for process documentation
•
•
Magnetic strip for automatic mobile unit recognition
•
•
Remote service enabled
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) (max. 4°dH)
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) (max. 4°dH)
•
•
1 x demineralised water, 2–10 bar flow pressure (200–1000 kPa)
•
•
3 inlet hoses ½" with ¾" threaded union
•
•
Drain valve DN 50, odour trap to be fitted on site
•
•
2 drain pumps DN 22, odour trap to be provided on site
o
o
3 N AC 400 V 50 Hz
•
•
Heating [kW]
9.0
9.0
Circulation pump [kW]
0.3/0.7*
0.3/0.7*
Total rated load without drying unit [kW]
10.0
10.0
Total rated load with drying unit [kW]
10.0
10.0
Fuse rating [A]
3 x 16
3 x 16
3 N AC 400 V 50 Hz
•
•
Circulation pump [kW]
0.3/0.7*
0.3/0.7*
Total rated load without drying unit [kW]
1.65
1.65
Total rated load with drying unit [kW]
9.0
9.0
Fuse rating [A]
3 x 16
3 x 16
Water connections
Electrical connection: Electrically heated
Electrical connection: Steam heating
Steam connection G ½" (DN 15)
•
•
Operating pressure 250–1000 kPa on models with TA/E (electrically heated drying unit)
•
•
Operating pressure 600-800 kPa on models with TA/D (steam-heated drying unit)
•
•
Compressed air connection 600–1200 kPa
•
•
3 N AC 400 V 50 Hz
•
•
Heating [kW]
9.0
9.0
Circulation pump [kW]
0.3/0.7
0.3/0.7
Total rated load with drying unit [kW]
10.0
10.0
Fuse rating [A]
3 x 16
3 x 16
Steam connection G ½" (DN 15)
•
•
Operating pressure 250–1000 kPa on models with TA/E (electrically heated drying unit)
•
•
Operating pressure 600-800 kPa on models with TA/D (steam-heated drying unit)
•
•
Compressed air connection 600–1200 kPa
•
•
Electrical connection: Steam / Electric heating (convertible)
* Machine spray arms / direct docking
28
Technical data
Washer-disinfectors
G 7825 (1 door)
G 7826 (2 doors)
1 x DOS 10/30 dispenser pump for liquid acidic agents
•
•
1 x DOS 60/30 dispenser pump for liquid detergent
•
•
2 x 10 l supply containers
•
•
Setting options for 3 x 5 l supply canisters
•
•
Dispenser systems
Connection options (retrofittable by Service)
DOS 10/30 dispenser pump for neutralising agent
o
o
DOS 60/30 dispenser pump for detergent/chemical disinfectant
o
o
Drying unit/side-channel compressor
Fan motor [kW]
2 x 0.9
2 x 0.9
Heater bank, depending on model [kW]
2 x 3.6
2 x 3.6
Total rated load, depending on model [kW]
9
9
Air throughput [m3/h]
250
250
Temperature selection in 1°C increments
60–115
60–115
Time selection in 1-minute increments
1–240
1–240
2 pre-filters EU 4, filter rating > 95 %, filter life 200 h
•
•
4 particulate/HEPA filters H 13, filter rating > 99.95% (DIN EN 1822-1998), filter life 500 h
•
•
Dimensions, weight
External dimensions H incl. plinth tray [mm]
1974
1974
External dimensions H incl. plinth tray and top-box panelling [mm]
2404
2404
External dimensions W/D [mm]
900/750
900/750
Useable cabinet dimensions H/W/D [mm]
683/541/610
683/541/610
Overall cabinet dimensions H/W/D [mm]
900/567/610
900/567/610
Docking height above floor (with plinth) [mm]
850
850
Weight [kg]
360
360
•
•
•
•
Outer casing
Stainless steel (AE)
Test certificates
VDE, VDE-EMC, IP X1, MDD CE 0366
• = Standard, o = Optional
29
Mobile units with 2-3 levels
Illustration shows sample load with
E 135 containers for baby bottles and
E 364 inserts for teats.
E 750 frame required when using E 135
container for baby bottles.
(cf. Page 17)
E 775/1 mobile unit (empty)
• For inserts on 2 levels
• Built-in spray arm
• Loading dimensions (from bottom):
Level 1: H 304, W 482, D 590 mm
Level 2: H 290, W 488, D 546 mm
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 400, W 530, D 600 mm
Mat. no. 7765730
Art. no. 69.5775.03
A 7/1 Insert
• Perforated base plate
• 7 x 7 mm perforations
• 3 mm ridge
• For E 775/1, E 735/1 and E 701/1
• H 1, W 543, D 473 mm
Mat. no. 6097000
Art. no. 69.5007.02
30
E 735/2 mobile unit (empty)
• For inserts on 3 levels
• 2 built-in spray arms
• Loading dimensions (from bottom):
Level 1: H 203, W 482, D 590 mm
Level 2: H 203, W 488, D 546 mm
Level 3: H 133, W 488, D 546 mm
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 552, W 530, D 600 mm
Mat. no. 7765710
Art. no. 69.5735.03
E 775/2 mobile injector unit
• Load capacity:
4 DIN mesh trays, 485 x 254 x 50 mm or
2 DIN mesh trays, 540 x 254 x 50 mm or
2 ISO mesh trays, 485 x 344 x 50 mm
• E 750 frame required when using E 135
container for baby bottles
E 735/2 mobile injector unit
• Load capacity:
6 DIN mesh trays, 485 x 254 x 50 mm or
3 DIN mesh trays, 540 x 254 x 50 mm or
3 ISO mesh trays, 485 x 344 x 50 mm
Mobile unit with 4-5 levels
E 701/2 mobile unit with
drying connection (empty)
• With 4 levels for DIN/ISO mesh trays
• 3 built-in spray arms
• Loading dimensions (from bottom):
Level 1: H 87, W 482, D 590 mm
Levels 2/3: H 87, W 488, D 546 mm
Level 4 (loading dimensions excl. Level 5
with E 702): H 223, W 488, D 546 mm
(cf. below for loading dimensions with
Level 5)
Mat. no. 7765700
Art. no. 69.5701.03
E 701/2 mobile unit with E 702
(illustrated)
Loading dimensions:
Level 4: H 87, W 488, D 546
Level 5: H 81, W 488, D 546
• Load capacity
8 DIN mesh trays, 485 x 254 x 50 mm
or
4 DIN mesh trays, 540 x 254 x 50 mm
or
4 ISO mesh trays, 485 x 344 x 50 mm
• Connection for hot-air drying
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 461, W 530, D 600 mm
E 702 module
• Level 5 for E 701/2 mobile unit
• For 2 DIN mesh trays
• H 160, W 530, D 560 mm
• Max. load per mesh tray 10 kg
Mat. no. 5221490
Art. no. 69.5702.01
E 703/1 top module
• Injector module for E 701/2 mobile unit
• For 7 lumened instruments
• H 170, W 80, D 555 mm
Mat. no. 7025350
Art. no. 69.5703.02
E 703/1 includes:
• 3 x E 362 blanking screws
• 2 x E 447 female adapters,
for male LuerLock
• 2 x E 449 male adapters,
for female LuerLock
• 3 x injection nozzles Ø 4 mm,
length 110 mm
(Mat. no. 4175030)
• 3 x injection nozzles Ø 4 mm,
length 120 mm with spring support
(Mat. no. 4398951)
• 3 x E 980 angled adapters
31
Inserts for shoes, kidney dishes, bowls
E 730 insert for 20 theatre shoes
• For E 550 and E 775/2 mobile units
• 20 holders, 280 mm
• For up to 20 pairs of theatre shoes,
max. Size 44
• H 290, W 470, D 540 mm
Mat. no. 5271020
Art. no. 69.5730.01
E 484 insert 1/1 (empty)
• For various utensils
• Wire gauge: 1.4 mm
• Mesh size: 8 mm
• Can be fitted with holders
– 4 x E 485 for 9 kidney dishes or
– 4 x E 486 for 4 bowls or
– 4 x E 487 for 16 theatre shoes
or
– 11 x E 489 universal holders for insoles
• H 65 (150), W 470, D 480 mm
E 484 insert with E 487
• E 484 can be fitted with 4 x E 487
holders, each for 4 theatre shoes,
max. Size 44
• Dimensions E 487:
H 280, W 464, D 10 mm
E 487
Mat. no. 5109250
Art. no. 69.5487.01
Mat. no. 5109190
Art. no. 69.5484.01
E 484 insert with E 489
• E 484 can be fitted with 11 x E 489
universal
holders, e.g. for insoles
• Dimensions E 489:
H 60, W 464, D 10 mm
E 489
Mat. no. 5337120
Art. no. 69.5489.01
32
E 484 insert with E 485
• E 484 can be fitted with 4 holders E 485
for 12 kidney dishes
E 484 insert with E 486
• E 484 can be fitted with 4 holders E 486
for 4 bowls
E 485
Mat. no. 5109210
Art. no. 69.5485.01
E 486
Mat. no. 5109230
Art. no. 69.5486.01
Inserts and mobile units for containers
E 713 includes:
• 2 x E 447 female adapters,
for male LuerLock
• 3 x injection nozzles Ø 3 mm,
length 24 mm
(Mat. no. 2829560)
Mat. no. 5221550
Art. no. 69.5713.01
E 484 insert with E 488
• E 484 can be fitted with E 488 for
breathing masks
E 488
Mat. no. 5109260
Art. no. 69.5488.01
E 936 insert for boom lamp handles
• For various boom lamp handles
• 15 receptacles
• L 500, W 245, H 90 mm
Mat. no. 7759480
Art. no. 69.5936.01
E 710/1 mobile unit (empty)
• For 4 DIN containers and lids
• Container size: 150 x 300 x 600 mm
• Lid size: 30 x 300 x 600 mm
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 450, W 530, D 600 mm
E 711/1 mobile unit (empty)
• For 2 DIN containers and lids
• Container size: 300 x 300 x 600 mm
• Lid size: 30 x 300 x 600 mm
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 455, W 530, D 600 mm
Mat. no. 5848260
Art. no. 69.5710.02
Mat. no. 7029790
Art. no. 69.5711.02
E 713 mobile unit with
drying connection (empty)
• 3 levels for 2 DIN containers, 2 lids
and 4 mesh trays
• 2 built-in spray arms
• Clearance heights (bottom to top):
Container size: 150 x 300 x 600 mm
Lid size: 30 x 300 x 600 mm
Level 2: H 120, W 488, D 546 mm
Level 3: H 112, W 488, D 546 mm
• Connections for 5 lumened instruments
• Connection for hot-air drying
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 575, W 530, D 600 mm
33
Solutions for MIS instruments
E 705/2 mobile unit with
drying connection
• For MIS instruments
max. length 600 mm
• Accommodates up to 42 lumened
instruments
(22 connections to top and
20 sloping connections)
• Loading dimensions (from bottom):
Level 1: H 105, W 482, D 590 mm
Level 2: H 75, W 488, D 546 mm
Level 3: H 365, W 488, D 546 mm
• Connection for hot-air drying
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 670, W 530, D 600 mm
Supplied as standard with:
• 3 x E 336 MIBO irrigation sleeves for
MIS instruments, Ø 11 mm,
Length 121 mm
• 2 x E 362 blanking screws
• 15 x E 442 injector sleeves
for MIS instruments, Ø 4-8 mm
• 5 x E 443 injector sleeves
for MIS instruments, Ø 8–12 mm
• 1 x E 444 insert/spiral rack for fibre optic
cables or tubing
• 1 x E 445, 12 caps for
irrigation sleeves/minimally invasive
instruments Ø 6 mm
• 1 x E 446, 12 caps for
irrigation sleeves/minimally invasive
instruments Ø 10 mm
• 3 x E 447 female adapters,
for male LuerLock
• 6 x E 448 silicone hoses, 300 mm long
• 5 x E 449 male adapters,
for female LuerLock
• 1 x E 451 insert 1/6 mesh tray,
H 55, W 150, D 225 mm
• 3 x E 452 injector nozzles,
Ø 2.5 x 60 mm
• 8 x E 453 injector nozzles,
with spring support Ø 4 x 100 mm
• 6 x E 454 injector nozzle
for trocar sleeves, Ø 10-15 mm
• 4 x E 456 spring stays for
MIS instruments
• 3 x E 464 adapter for
E 454 injector nozzle for trocar sleeves
Ø 20 mm
• 2 x E 472 spring supports for injector
nozzle, Ø 4.0 mm
• 2 m silicone hose, Ø 5 mm,
Part no. 4822890
Mat. no. 7029810
Art. no. 69.5705.03
Further accessories on Page 64
34
Mobile unit for MIS instruments and reprocessing
dental transmission instruments
E 774/1 mobile unit with
drying connection
• Modular system for 2-3 MIS OP
sets or dental transmission instruments
• For lumened instruments in 4 modules
with integrated nozzles/adapters (not
included)
• Applications:
E 903/1 module for short
MIS/urology instruments
E 905/1 module for short
MIS instruments
E 906/1 module for long
MIS instruments
3 x E 444 drums for fibre optics and hoses
1 x E 460 insert for rigid fibre optics and
1 x E 457 insert for separable MIS
instruments or 1 x E 142 DIN mesh tray
• Connection for hot-air drying
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 605, W 530, D 600 mm
Supplied as standard with:
• 4 x E 447 female adapters, for male
LuerLock
• 6 x E 362 blanking screws
Mat. no. 7040190
Art. no. 69.5774.02
Description of modules
on Pages 62/63
35
Mobile unit for MIS instruments
Geuder AG recommends that their current
range of instruments be reprocessed in a
Miele washer-disinfector.
E 729 mobile unit with
drying connection
• For 4–5 OP sets (cataracts)
• Mobile unit with 3 levels for minimally
invasive instruments and accessories:
• 2 levels for 4 DIN mesh trays
• 1 level with 16 injector nozzles (hose and
male LuerLock) and 30 injector nozzles
(15 male and 15 female LuerLock adapters)
• Connection for E 478 on feed pipe
• Vertical clearance (bottom to top):
Level 1: 124 mm
Level 2: 114.5 mm
Level 3: 160 mm
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (excl. ML magnets)
• H 471, W 530, D 600 mm
Supplied as standard with:
• 1 x E 476 receptacle
• 1 x E 477 stop
• 8 connectors LuerLock female/female
(E 790)
• 8 connectors
LuerLock female/
LuerLock male (E 791)
E 478/1 adapter
• For 4 narrow-lumened cannulae
(Sautter cannulae)
Mat. no. 7292920
Art. no. 69.7478.02
Mat. no. 6517580
Art. no. 69.5729.01
FP ED
• Stainless-steel filter insert for E 478/1
• Ø 30 mm
Mat. no. 7290770
Art. no. 69.7512.02
Further accessories for MIS instruments on
Page 65.
36
Mobile unit for MIS instruments
E 715/1 mobile unit with
drying connection
• For approx. 4 AN sets or 12 breathing
tubes, max. length 1.5 m, and various
accessories
• Tubes wound around spiral drum
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile
unit recognition (excl. ML magnets)
• H 645, W 530, D 600 mm
E 715/1 includes:
• 1 x E 430 insert 1/3 mesh tray,
H 40, W 150, D 445 mm (supplied)
• 1 x E 431 injector nozzle for breathing
bags,
8 x 193 mm (supplied)
• 1 x E 432 holder for 3 or 4
corrugated breathing tubes
(supplied)
• 3 x E 433 holders for 3 or 4
silicone breathing tubes
• 1 x E 434 holder for 3 or 4
paediatric breathing tubes
(supplied)
• 6 x E 466 injector nozzles for breathing
bags, 8 x 333 mm
• 15 x E 496 injector nozzles, 4 x 120 mm
E 466 accessory for AN mobile unit
• Injector nozzle for breathing bags,
8 x 333 mm
Mat. no. 4966620
Art. no. 69.7466.01
E 496 accessory for AN mobile unit
(no illustration)
• Injector nozzle for intubation material,
4 x 120 mm
Mat. no. 5235490
Art. no. 69.7496.01
Mat. no. 6491890
Art. no. 69.5715.02
37
38
Washer-disinfectors
PG 8527 and PG 8528
Adding value to instrument
reprocessing in CSSD
Miele Professional has been setting
milestones for decades in the field of
efficient and safe machine-based
reprocessing in clinics and surgeries. And,
once again, Miele is setting new standards
with the PG 85 machine generation.
When it comes to centrally or decentrally
reprocessing large quantities of instruments,
Miele's PG 8527 and PG 8528 offer huge
benefits: Greater cleaning capacity,
improved process security and better
efficiency.
Specifications
WD
Unit width/depth
Doors
Cabinet
Useable dimensions H/W/D
Cabinet volumes
approx.
Capacity pro cycle
G 7823/G 7824
900/770 mm
Bottom-hinged door(s)
510/530/620 mm
168 l
8 DIN mesh trays
3 AN sets
2 MIC sets
G 7825/G 7826
900/750 mm
Bottom-hinged door(s)
683/541/610 mm
225 l
10 DIN mesh trays
4 AN sets
2 MIC sets
PG 8527/PG 8528
1150/870 mm
Vertical-rise door(s)
675/650/800 mm
351 l
15 DIN mesh trays
7 AN sets
3 MIC sets
39
PerfectEco – Combined water and energy savings
• Economic operation through lower
water and electricity consumption
• Excellent washing and disinfection
Thanks to an innovative combination of
water and heat recovery, large-chamber
decontamination units from the PG 85
series can be put to use in CSSDs even
more efficiently. Waste heat from the
drying cycle is channelled through the
steam condenser to pre-heat the incoming
demineralised water supply. The pre-heated
demineralised water is then heated to a
higher temperature in the boiler in readiness
for the final rinse. This way, process heat
is kept within the system and put to direct
use. A heat-recovery steam condenser
also dispenses with the need for an intake
of cold water which, on the simpler model,
was discharged after use into the drainage
system. So in addition to energy savings,
this approach results in a significant
reduction in water consumption of up to
130 l per cycle.
1 Demineralised water intake, cold
2 Heat-recovery steam condenser
3 Demineralised water boiler with additional heating
4 Demineralised water intake into chamber
5 Hot waste air
6 Cooled waste air
40
PerfectTouchControl – Simple, local-language controls
PerfectPure sensor – Residue-free rinsing
• Optimum user convenience
• Reliable hygiene
• Perfect control
Simple to use, easy to clean: Washerdisinfectors from the PG 85 series feature
a touch-sensitive display. This easy-touse PerfectTouch display guarantees
unique user convenience combined with
superb hygiene. A fully flush, chemicalproof display screen makes for simple and
effective wipe disinfection.
The controls are outlined on the glass
surface and slight pressure is enough to
activate functions and launch programmes,
even when wearing protective gloves.
The man-machine interface involves
the use of only a very limited number of
controls; all steps in the process appear
in the display in the user's own language.
Display texts, for example for the A0
value, actual temperature, conductivity,
countdown times and all other protocol
data can be defined individually. Using the
integrated A0 controls, the user is able to
select standard values or define sitespecific values.
• Chemical-resistant glass surfaces
• Innovative programme cycles
• Continuous conductivity monitoring
• Residue-free rinse quality
• Safe reprocessing
Residue in the final rinse can have a
negative impact on reprocessing results.
Alkaline residue in ophthalmology, for
instance, can in extreme cases result in
serious complications when instruments
are reused. Excessive residue can
also result in corrosion and deposits on
instruments.
The new and patented PerfectPure
conductivity meter reliably detects the
presence of minerals in the rinse water,
such as the dissolved salts introduced
with alkaline or acidic process chemicals,
limiting them to a threshold level defined by
the user.
Conductivity monitoring is contact-free
using a maintenance-free system with
extremely precise tolerance in the 5–40
μS/cm and 40–100 μS/cm ranges.
Depending on machine settings,
conductivity readings can even be used to
control the programme cycle. This allows
the number of necessary rinse cycles to
be determined automatically if conductivity
is outside the predetermined range: In the
event that the target conductivity reading
specified by the user is not achieved in
the final rinse cycle, further water intake
cycles are automatically added. Recording
conductivity over the entire process helps
ensure the reproducibility of validated
processes.
• Maintenance-free conductivity monitoring
41
PerfectFlow sensor – Volumetric monitoring of dispensed
quantities
PerfectSpeed sensor – Spray arm monitoring
• Continuous monitoring of dispensed volumes
• Precise results, user-defined tolerances
• Perfect dispensing control
A decisive factor contributing to good
reprocessing results is the precise
volumetric control of dispensed chemicals.
The currently valid DIN EN ISO 15883
standard prescribes the redundant
monitoring of dispensing. Miele's new
PerfectFlow sensor using ultrasound
technology offers considerably greater
safety margins than conventional systems.
The PerfectFlow sensor is a standard
feature and guarantees a hitherto
unparallelled degree of precision in
controlling and monitoring volumetric flow,
independent of viscosity and ambient
temperatures. The monitoring system is fully
independent of the dispensing system and
can be calibrated.
Dispensing tolerances can be set to comply
with legal standards or defined individually;
chemicals are dispensed efficiently
and reliably, irrespective of the type of
product or ambient conditions (continuous
operation, fluctuating climatic conditions).
Any deviation from the target quantities are
safely detected and the reproducibility of
validated processes guaranteed. An error
message is issued or the programme is
aborted if values are outside the tolerance
range.
• Extremely precise
• Product- and temperature-independent
dispensing control
• Precisely monitored reprocessing
• Improved reproducibility of validated processes
• Perfect washing and disinfection results
To guarantee perfect and safe cleaning and
disinfection results, the rotational speed of
the spray arms must be within defined limits.
With the new PerfectSpeed sensor, the
precise speed of each individual spray arm
is carefully monitored and documented –
whether in the cabinet or on board baskets
and mobile units. The spray arm monitoring
feature uses a sensor strip located outside
the cabinet to detect the passage of spray
arms and to ensure that speeds are within
range. Information shown in the display
indicates whether the values are correct
or whether the user must intervene on
account, for example, of excessive foam
slowing spray arm motion down.
42
In the event of a deviation from target
values, either an error message is issued or
the programme is interrupted immediately to
allow the user to deal with the cause of the
fault, depending on system parameters.
Deviations can also be recorded in the
automatic process documentation. Spray
arm sensing offers effective protection
against spray arm blockages by items in
the load and also provides information on
pressure conditions in the machine and
in mobile units and baskets. Spin speeds
provide a valuable indication as to the
reproducibility of validated processes,
increasing safety margins in machine-based
instrument reprocessing systems by a
considerable degree.
• Spray arm monitoring on all levels
• Monitoring of spray arms speeds
PerfectHEPA drying – Pure drying air
PerfectDoc – Gap-free documentation
• Optimum drying results
• High level of air purity in chamber
• High standards of hygiene
New hygiene standards and the use of
innovative Miele technology also applies to
the drying phase. The new Class H 13 hightemperature HEPA filter, located directly
upstream from the cabinet, prevents the
admission of unwanted air-borne particles
from room air. This ensures exceedingly
high levels of air purity in the cabinet.
Thanks to streamlined air ducting, Perfect
HEPA Drying also ensures excellent drying
performance.
• Continuous process documentation
• Wide range of parameters documented
• Perfect security and
process traceability
The PG 8527 is fitted with a network
interface for process documentation as a
standard feature. The PerfectDoc module
allows the machine to interface with process
documentation software. This facilitates
the recording of many process parameters,
including temperatures, as well as the
documentation of entire process protocols
including A0 values, dispensed quantities,
spray arms speeds and conductivity
readings. Alternatively, a printer can be used
for documentation purposes.
• Simple integration into standard process
documentation systems without additional
hardware or software
• Comprehensive sterile supplies logistics
with process documentation, instrument
management and administration of sterile
supplies
43
Machine features and specifications
Versions
• PG 8527: Single-door model with vertical
sliding door
• PG 8528: Two-door barrier washerdisinfector for installation in a diaphragm
wall
Capacity per cycle
• 15 DIN mesh trays
or 6 DIN containers
150 x 300 x 600 mm
or 4 DIN containers,
300 x 300 x 600 mm
or 7 AN sets
or 3 MIC sets
Design
• Stand-alone and side-by-side installation
• Width 1150 mm
• Modular machine concept, customisable
features
• Single-chamber system for washing,
disinfection and drying
• Service-friendly design
• Heater elements outside wash chamber
• Low heat and sound emissions thanks to
double insulation
44
Technical data Pages 50/51
Vertical-rise all-glass doors and
cabinet lighting
To improve process visibility and
supervision, all-glass vertical-rise doors
are available as optional extras on the
new range of products. The door can be
programmed to open automatically at
the end of a programme. Door motion is
monitored electronically.
Models with all-glass doors also feature
cabinet lighting comprising 4 integrated
spotlights. Lighting times are programmable.
Cleaning technology
• Hygienic freshwater system with fresh
water intake in each programme stage
• Cleaning, disinfection and drying in a
closed, single-cabinet system
• Hygienic stainless-steel wash cabinet with
coved corners and sloping self-draining
ceiling
• 2 spray arms in cabinet for thorough
cleaning of instrument surfaces
• Spray arms with high water jet impact
force
• Full water jet access, ensuring optimum
results
• Thorough cleaning of lumens with injector
system
• Direct docking of mobile units to water
circuit
Standard features
• 2 powerful circulation pumps
• Triple filtration with large surface filter,
coarse filter and micro-fine filter
• Filter in inlet hoses
• Flowmeter to monitor water intake
quantities
• 1 dump valve
• Spray arm monitoring
• Ultrasound volumetric dispensing control
• Automatic mobile unit sensing
Dispenser systems
• 2 bellows-type dispenser pumps for liquid
detergent and neutralising agent
• Extendible (further 3 internal
dispenser pumps retrofittable)
• Maintenance-free dispensing technology
Standard machine features
Infeed side
Water softener
• High-capacity water softener (external)
Drainage
• 2 drain pumps
Controls
• Freely programmable PROFITRONIC+
controls
• 64 programme slots
– 16 standard programmes
– 17 service programmes
– 31 vacant programme slots
• User interface with local-language display
• Display of programme selection and
programming dialogs, countdown time,
faults and operating hours.
• Compilation of new programmes using
machine controls or using PC/laptop via
optical interface
Interfaces
• 1 x RJ 45 interface for
process documentation
• 4 serial interfaces, for example for remote
service
• Optical interface for service and
maintenance
Printer
• Integrated 8-pin printer to record
key process parameters
Mobile unit recognition
• Sensors for mobile unit recognition and
programme assignment
Multiport
• For connection of printer and/or scanner
Outfeed side
Safety devices
• Electric door lock
• Programme recontinuation in event of
power outage
• Peak-load negotiation
• Optical and acoustic signal at end of
programme
• 2 sensors, 1 each for temperature control
and monitoring
• Port for simple positioning of sensors in
the wash cabinet for process validation
• Sensors in cabinet and a magnetic strip on
mobile units for automatic assignment of
programmes to mobile units
• Volumetric dispensing control
• Spray arm sensing
45
Washer-disinfectors
46
Machine versions, additional modules
Basic versions
PG 8527
Features
Mat. no.
Art. no.
Electric
AE PT EL AV
6881680
62.8527.21
Steam/Electric
AE PT D/EL AV
6881690
62.8527.31
PG 8528
Electric
AE PT EL AV
6757350
62.8528.21
Steam/Electric
AE PT D/EL AV
6757370
62.8528.31
C.f. Page 5 for explanation of symbols
Additional modules for PG 8527 and PG 8528
Mat. no.
Art. no.
Drain pump
6758120
69.2400.01
Stainless-steel grade – Cabinet AISI 316 L (DIN 1.4404)
6758160
69.2410.01
Boiler EL
6758220
69.2430.01
Boiler D/EL
6758270
69.2430.02
Glass door PG 8527 (1 glass door)
6758320
69.2450.01
Glass doors PG 8528 (2 glass doors)
6815810
69.2450.02
Printer – integrated, on infeed or outfeed side (please quote)
6758340
69.2470.01
Scanner connection with scanner on infeed, outfeed or both sides (please quote)1
7686510
69.2470.12
Conductivity module (information on P. 41)
6758400
69.2440.01
Dispenser pump – integrated (additional)2 – Please state purpose (cf. footnotes)
6758410
69.2460.01
OXIVARIO
6758420
69.2460.20
ORTHOVARIO (programme package also contains OXIVARIO)
6815800
69.2460.30
Please note:
D/EL machine version can only be operated in combination with D/EL boiler
1
Combination of printer/scanner only possible on outfeed side
2
Please specify whether dispenser pump is for detergent, neutralising agent or chemical disinfectant.
47
Components/Accessories
SBW
Plinth/floor tray
• Frame with integrated stainlesssteel floor tray
• 2 cross-brackets for moving
machine
• Cut-outs for steam and plumbing
connections, dump valve, dual
drain valve and floor tray drain
• H 100, W 1150, D 856 mm
SBW/1
Plinth/drip tray without cutouts
• For version with drain pump
• Utilities, e.g. water, electricity and
steam, from top
• H 100, W 1150, D 856 mm
SBWR
Plinth/floor tray
• Roller plinth/floor tray
• Castors allow machine to be
pulled forward for servicing
• PG 8527 with drain pump
• Utility supply access through
ceiling
• H 100, W 1150, D 856 mm
Integrated printer for
process documentation
• 8-needle printer and RS 232 serial
interface
• Paper format: 58 mm wide
• For installation on infeed side of
PG 8527 or outfeed/infeed side of
PG 8528
• Recording of following parameters
during programme:
Date and Mach. no., Prog. no.,
prog. name, starting and finishing
time, dispensing concentration,
dispensing temperature and
pumps 1–4, target temperature
reached (wash/dry) with times,
all faults (e.g. 'water inlet'), all
incidents of manual intervention
(start, stop, power outage)
• For disinfection programmes:
Meets process parameters with
respect to temperature and
holding time
Paper rolls available from Miele
Spares: Mat. no.: 4781470
Paper roll size:
Width 58 mm, Ø 50 mm,
Length 20 m
Accessories
Features
Mat. no.
Art. no.
SBW
Plinth/drip tray for PG 8527/PG 8528
6757850
69.2530.01
No cut-outs
6757860
69.2530.02
SBWR
Plinth/drip tray, on castors for PG 8527
5653140
69.3710.05
Printer
For process documentation
6758340
69.2470.01
SBW/1
48
Plinth/drip tray for PG 8527/PG 8528
Accessories
TA/E
Drying unit/electric
• Side-channel compressor
• Drying of interior and exterior load
surfaces
• 2 pre-filters Class EU 4, filter rating
> 95% (ASHRAE Standard 52–68)
• Life cycle 200 h
• 2 particulate filters / HEPA S-class
filters H 13, filter rating
> 99.95% (DIN 1822-1998)
filter life 1000 h
• Voltage
3N AC 400 V 50 Hz
• Heating 2 x 4 kW=8 kW
• Heavy-duty fan/side-channel
compressor, life cycle above
10,000 h, 2 air circuits 1.8 kW
• Total rated load: 10 kW
• Air throughput approx. 250 m3/h
• Temperature infinitely adjustable
between 60-115°C
• Time programmable from 1-240
mins.
• Incl. fitting frame for installation on
top of PG 8527/PG 8528
• Panelling through to ceiling to be
provided on site, cf. MAV 27/28
TA/D
Drying unit/steam
• Side-channel compressor
• Drying of interior and exterior load
surfaces
• 2 pre-filters Class EU 4, filter rating
> 95% (ASHRAE Standard 52–68)
• Filter life 200 h
• 2 particulate HEPA filters H13,
filter rating > = 99.95%
DIN EN 1822-1998
• Life cycle 1000 h
• Heating steam-to-air heat
exchanger (steam circuit stainless
steel, air circuit aluminium)
• Steam pressure 3.5–6 bar
(350–600 kPa)
• Steam quality: filtered saturated
steam
• Steam capacity (max.) 15 kg/h
(machine and drying unit 50 kg/h)
• Heavy-duty fan/side-channel
compressor, life cycle above
10,000 h, 2 air circuits 1.8 kW
• Total rated load: 1.8 kW
• Air throughput approx. 250 m3/h
• Temperature infinitely adjustable
between 60-115°C
• Time programmable from 1-240
mins.
• Incl. fitting frame for installation on
top of PG 8527/PG 8528
• Panelling through to ceiling to be
provided on site, cf. MAV 27/28
DK 27/28
Steam condenser/
heat exchanger
• With water cooling (Only
dehumidified air should be
introduced into air conditioning
system)
• Connection to on-site cooling
circuit (no water consumption)
or cold water connection (water
consumption)
• Max. water pressure: 8 bar
• On-site installation
• Reduction of air discharge
temperature to approx. 30-35°C,
• Reduction in relative humidity to
approx. 60-70%
MAV 27/28
Top-box panelling kit for
TA/DK frame
• Service hatches, with lock, for
both sides of diaphragm wall,
stainless steel
• Ventilation grille on the infeed side
• H 760, W 1150, D 765 mm
• Diaphragm wall panelling between
the top of the top-box panelling
and the ceiling must be provided
on site
• Incl. MAV top panel
to cover top-box panelling
DK 27/28 WR
PerfectEco heat-recovery steam
condenser
• To preheat demineralised
water in steam condenser
• Water savings up to 130 l/cycle
• On-site installation
• On page 40 please find
further information
Accessories
Features
Mat. no.
Art. no.
TA/E
Drying unit/electric
6757710
69.2500.01
TA/D
Drying unit/steam
6757770
69.2500.02
DK 27/28
Steam condenser/heat exchanger
6757790
69.2510.01
DK 27/28 WR
Heat-recovery steam condenser**
9032080
69.2511.01
MAV 27/28
Top-box panelling installation kit
6757820
69.2520.01
OXIVARIO
Retrofit kit OXIVARIO incl. pumps and installation
6911330
ORTHOVARIO
Retrofit kit ORTHOVARIO incl. pumps and installation*
6911320
** presuming installation of OxiVario
** only for systems with boiler
49
Technical data
Washer-disinfectors
Single-door model with vertical sliding door
PG 8527
PG 8528
(1-door model)
(2-door model)
•
–
Through-feed unit with vertical-lift doors
–
•
All-glass doors/cabinet lighting
o
o
Single/multiple installations
•
•
Freshwater system, max. temperature 93°C
•
•
2 circulation pumps [Qmax. l/min]
400/600*
400/600*
Boiler for heating demineralised water
o
o
Controls/programmes
PROFITRONIC+, 16 standard programmes
•
•
64 programme slots
•
•
Electric door lock
•
•
Peak-load negotiation
•
•
Direct mobile unit docking for cleaning and drying of lumened instruments
••
Process documentation network interface
•
•
Magnetic strip for automatic mobile unit recognition
•
•
Spray arm sensing
•
•
Conductivity metering
o
o
Remote service enabled
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) (max. 4°dH)
•
•
1 x hot water, 2-10 bar flow pressure (200-1000 kPA) (max. 4°dH)
•
•
Water connections
1 x demineralised water, 2–10 bar flow pressure (200–1000 kPa)
••
3 inlet hoses ½" with ¾" threaded union
•
Drain valve DN 50, odour trap to be fitted on site
•
•
•
2 drain pumps DN 22, odour trap to be provided on site
o
o
3 N AC 400 V 50 Hz
•
•
Heating Cabinet [kW]
18
18
Heating Boiler [kW]
15
15
Electrical connection: Electrically heated
Circulation pump [kW]
0.7/1.2*
0.7/1.2*
Total rated load without drying unit [kW]
20
20
Total rated load with drying unit [kW]
20
20
Fuse rating [A]
3 x 32
3 x 32
3 N AC 400 V 50 Hz
•
•
Circulation pump [kW]
0.7/1.2*
0.7/1.2*
Total rated load without drying unit [kW]
2
2
Total rated load with steam-heated drying unit [kW]
2
2
Total rated load with drying unit [kW]
10
10
Fuse rating [A]
3 x 16
3 x 16
Steam connection G ½" (DN 15)
•
•
Operating pressure 350-600 kPa (steam-heated drying unit)
•
•
Compressed air connection 600–1200 kPa
•
•
3 N AC 400 V 50 Hz
•
•
Heating Cabinet [kW]
18
18
Heating Boiler [kW]
15
15
Electrical connection: Steam heating
Electrical connection: Steam / Electric heating (convertible)
50
Circulation pump [kW]
0.7/1.2*
0.7/1.2*
Total rated load with drying unit [kW]
20
20
Fuse rating [A]
3 x 32
3 x 32
Steam connection G ½" (DN 15)
•
•
Operating pressure 350-100 kPa (electric drying unit)
•
•
Compressed air connection 600–1200 kPa
•
•
* Spray arms / direct docking
Technical data
Washer-disinfectors
PG 8527
PG 8528
(1-door model)
(2-door model)
Dispenser systems
2 bellows-type pumps for detergent and neutralising agent
•
•
2 x 10 l supply containers
•
•
Setting options for 4 x 10 l supply canisters
•
•
Volumetric dispensing control
•
•
Max. 3 additional dispenser pumps*
o
o
Dimensions, weight
External dimensions H incl. plinth tray [mm]
1660
1660
External dimensions H incl. frame with drying unit [mm]
2420
2420
External dimensions W/D [mm]
1150/870
1150/870
Useable cabinet dimensions H/W/D [mm]
675/650/800
675/650/800
Overall cabinet dimensions H/W/D [mm]
860/685/800
860/685/800
Loading height above floor
850
850
Weight [kg]
408
386
•
•
•
•
Outer casing
Stainless steel (AE)
Test certificates
VDE, VDE-EMC, IP 20, MDD CE 0366
TA/E drying units, Electrically heated
Voltage
3 N AC 400 V 50 Hz 3 N AC 400 V 50 Hz
Fan motor [kW]
1.8
1.8
Heater bank, depending on model [kW]
8
8
Total rated load, depending on model [kW]
10
10
Air throughput [m3/h]
approx. 250
approx. 250
Temperature selection in 1°C increments
60–115
60–115
Time selection in 1-minute increments
1–240
1–240
2 pre-filters EU 4, filter rating > 95 %, filter life 200 h
•
•
2 particulate filters / HEPA filters, H13, filter rating > 99.95% (DIN 1822-1998), filter life 1000 h
•
•
TA/E drying units, steam-heated
Steam pressure [bar]
3.5–6
3.5–6
Steam quality: filtered saturated steam
•
•
Steam capacity: (max.) [kg/h]
15
15
Total rated load, depending on model [kW]
1.8
1.8
Air throughput [m3/h]
approx. 250
approx. 250
Temperature selection in 1°C increments
60–115
60–115
Time selection in 1-minute increments
1–240
1–240
2 pre-filters EU 4, filter rating > 95%, filter life 200 h
•
•
2 particulate/HEPA filters, H 13, filter rating > 99.95% (DIN EN 1822-1998), filter life 1000 h
•
•
(machine and drying unit 50 kg/h)
* 4 pumps required for OXIVARIO programme, cf. additional module on Page 47.
5 pumps required for OXIVARIO programme, cf. additional module on Page 47.
• = Standard, o = Optional
51
Mobile units with 2-5 levels
E 975/2 mobile unit (empty)
• For inserts on 2 levels
• Load capacity
6 DIN mesh trays 485 x 254 x 50 mm
• Built-in spray arm
• Loading dimensions (from bottom):
Level 1: H 297, W 590, D 780 mm
Level 2: H 290, W 590, D 780 mm
• Magnetic strip for automatic mobile
unit recognition (incl. ML magnets)
• H 427, W 640, D 790 mm
Mat. no. 7765790
Art. no. 69.5975.03
E 900-5/2 mobile unit (empty)
• For inserts on 5 levels
• Load capacity
15 DIN mesh trays 485 x 254 x 50 mm
• 4 built-in spray arms
• Loading dimensions (from bottom):
Level 1: H 80, W 585, D 780 mm
Levels 2-4: H 80, W 595, D 780 mm
Level 5: H 73, W 595, D 780 mm
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 605, W 640, D 790 mm
Mat. no. 7765760
Art. no. 69.5900.06
52
E 935/2 mobile unit (empty)
• For inserts on 3 levels
• Load capacity
9 DIN mesh trays 485 x 254 x 50 mm
• 2 built-in spray arms
• Loading dimensions (from bottom):
Level 1: H 202, W 585, D 780 mm
Level 2: H 202, W 595, D 780 mm
Level 3: H 132, W 595, D 780 mm
• Magnetic strip for automatic mobile
unit recognition (incl. ML magnets)
• H 524, W 640, D 790 mm
Mat. no. 7765780
Art. no. 69.5935.03
• Spray arm monitoring on all levels
• Monitoring of spray arms speeds
• Load capacity per mesh tray: Max. 10 kg
E 900-4/2 mobile unit (empty)
• For inserts on 4 levels
• Load capacity
12 DIN mesh trays 485 x 254 x 50 mm
• 3 built-in spray arms
• Loading dimensions (from bottom):
Level 1: H 112.5, W 585, D 780 mm
Level 2: H 112.5, W 595, D 780 mm
Level 3: H 112.5, W 595, D 780 mm
Level 4: H 114, W 595, D 780 mm
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 557, W 640, D 790 mm
Mat. no. 7765740
Art. no. 69.5900.05
4-tier mobile unit
E 901/2 mobile unit with
drying connection (empty)
• For mesh trays, bowls and
8 lumened instruments
• 3 built-in spray arms
• 4 levels
• Loading dimensions (from bottom):
Level 1: H 80, W 593, D 780 mm
Level 2: H 80, W 593, D 780 mm
Level 3: H 80, W 593, D 780 mm
Level 4: H 210, W 520, D 780 mm
• Load capacity per level 1-3:
3 DIN mesh trays (485 x 254 x 50 mm)
or
3 DIN mesh trays (540 x 254 x 50 mm)
or
2 ISO mesh trays (485 x 344 x 50 mm)
• Load capacity Level 4:
3 DIN mesh trays (485 x 254 x 50 mm)
or
2 DIN mesh trays (540 x 254 x 50 mm)
or
various bowls, injector nozzles for
lumened instruments
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile
unit recognition (incl. ML magnets)
• H 590, W 640, D 790 mm
Supplied as standard with:
• 3 x E 362 blanking screws
• 2 x E 447 female adapters,
for male LuerLock
• 2 x E 449 male adapters,
for female LuerLock
• 4 x injection nozzles Ø 4 mm, length 110
mm (Mat. no. 4175030)
• 3 x injection nozzles Ø 4 mm, length 120
mm with spring support (Mat. no. 4398951)
• 3 x E 980 angled adapters
E 980 angle adapter
• Enables connection of long lumened
instruments
• Screw fittings for various LuerLock
adapters or nozzles for lumened
instruments
Mat. no. 7025360
Art. no. 69.5980.01
Mat. no. 6893870
Art. no. 69.5901.03
53
Inserts for theatre shoes
E 984 insert 1/2
• For various utensils
• Can be fitted with holders
– 7 x E 985 for 12 kidney dishes or
– 5 x E 986 for 5 bowls or
– 5 x E 987 for 15 theatre shoes
max. Size 44 or
– 7 x E 989 universal holders
for 8 insoles or
– 3 x E 993 for 9 theatre shoes,
max Size 48
• H 65 (150), W 371, D 572 mm
E 984 insert with E 987
• E 984 can be fitted with 5 x E 987 holders,
each for 15 theatre shoes,
max. Size 44
E 987
Mat. no. 5337800
Art. no. 69.5987.01
Mat. no. 5337750
Art. no. 69.5984.01
E 930 insert for theatre shoes
• For E 975/2 mobile unit on lower level
• 36 holders, 280 mm for
36 theatre shoes, max. Size 43
• H 289, W 586, D 752 mm
Mat. no. 5001360
Art. no. 69.5930.01
E 931 insert for theatre shoes
• For E 975/2 mobile unit
on lower level
• 20 holders for 20 theatre shoes
max. Size 48
• Total capacity per cycle:
40 theatre shoes (20 pairs)
• H 254, W 586, D 752 mm
Mat. no. 7439490
Art. no. 69.5931.01
54
E 984 insert with E 989
• E 984 can be fitted with 7 x E 989 for 8
insoles
E 989
Mat. no. 5376740
Art. no. 69.5989.01
Inserts for kidney dishes, bowls
Test Kit
E 492 insert 1/2
• For 9 kidney dishes
• 9 holders, H 86 mm,
spacing 49 mm
• For lower basket
• H 120, W 256, D 474 mm
E 984 insert with E 985
• Can be fitted with 7 x E 985 holders
for 12 kidney dishes
E 984 insert with E 986
• Can be fitted with 5 x E 986 holders
for 5 bowls
Mat. no. 5337760
Art. no. 69.5985.01
Mat. no. 5337770
Art. no. 69.5986.01
Mat. no. 5771140
Art. no. 69.5492.01
TK/1
Test Kit
• Tests the presence of proteins and
monitors cleaning results
• Contents sufficient for 48 tests
• With coding strips for reflectometer
E 936 insert for boom lamp handles
• For various boom lamp handles
• 15 receptacles
• L 500, W 245, H 90 mm
Illustration shows Miele test kit with Merck
coding strips and reflectometer (not
included)
Post-reprocessing security
In collaboration with Merck, Miele
has developed a protein test (test kit)
to provide a fast method of checking
cleaning performance on instruments. This
allows regular quality control of cleaning
performance.
Mat. no. 6157330
Mat. no. 7759480
Art. no. 69.5936.01
55
Mobile units for containers
56
E 910/4 mobile unit (empty)
• For 6 DIN containers and lids
• Container size: 150 x 300 x 600 mm
• Magnetic strip for automatic mobile
unit recognition (incl. ML magnets)
• H 455, W 640, D 790 mm
E 911/3 mobile unit (empty)
• For 4 DIN containers and lids
• Container size: 300 x 300 x 600 mm
• Magnetic strip for automatic mobile
unit recognition (incl. ML magnets)
• H 455, W 640, D 790 mm
E 912/2 mobile unit (empty)
• For 4 ISO containers and lids
• Container size: 180 x 400 x 600 mm
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 455, W 640, D 790 mm
Mat. no. 7439500
Art. no. 69.5910.05
Mat. no. 6943850
Art. no. 69.5911.04
Mat. no. 6943860
Art. no. 69.5912.03
E 913/3 mobile unit with
drying connection (empty)
• Mobile unit with 3 levels for
containers/lids/mesh trays
• Loading dimensions:
Level 1: for 3 DIN containers
150 x 300 x 600 mm with lid
• Level 2: H 97, W 575, D 780 mm
Level 3: H 103, W 595, D 780 mm
• 2 built-in spray arms
• Connections for 5 lumened instruments
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 574, W 640, D 790 mm
Mat. no. 6893880
Art. no. 69.5913.04
E 934/1 mobile unit (empty)
• For orthopaedic containers on 4 levels
• Loading dimensions (from bottom):
Level 1: H 90 or 180 mm
(without Level 2), W 585, D 780 mm
Level 2: H 90, W 595, D 780 mm
Level 3: H 167, W 595, D 780 mm
Level 4: H 180, W 595, D 780 mm
• Level 2 is removable, resulting in
clearance of 180 mm on Level 1.
• Spray arms below Levels 3 and 4
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 500, W 640, D 790 mm
Mat. no. 7765770
Art. no. 69.5934.02
Mobile unit and modules
for orthopaedic instruments
E 941 mobile unit with
drying connection (empty)
• For modules on 2 levels
• Depending on the size of the glassware up
to 2 modules can be accommodated on
each level
• Water and drying air enters via a direct
docking system and adapters.
• Loading dimensions (from bottom):
Level 1: (without top module)
H 609, W 558, D 352 mm
Level 1: (with top module)
H 317, W 558, D 352 mm
Level 2: H 245, W 558, D 352 mm
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 421, W 619, D 790 mm
Mat. no. 4812530
Art. no. 69.5941.01
Approval of Miele OrthoVario for reprocessing currentseries Aesculap motor systems.
E 948 injector module for E 941
• -For orthopaedic instruments
• -For 1 x E 142 mesh tray (not included)
• -Equipped with 28 nozzles
• Loading dimensions:
H 125, W 520, D 310 mm
• H 230, W 558, D 352 mm
Mat. no. 7025310
Art. no. 69.5948.01
E 949 injector module for E 941
• For marrow channel pins and reamers
• 8 sleeves for marrow channel pins (prefitted) and 6 extension sleeves for bone
marrow drills (supplied)
• H 115, W 558, D 352 mm
Mat. no. 7025320
Art. no. 69.5949.01
E 955 filter insert
• For lumened instruments, e.g. sleeves with
diameter of 3-15 mm and
max. length of 125 mm
• H 85, W 221, D 156 mm
Mat. no. 7025330
Art. no. 69.5955.01
E 945/2 module (not illustrated)
• Carriage frame for inserts
• H 55, W 558, D 352 mm
Mat. no. 7459420
Art. no. 69.5945.03
57
Mobile unit for MIS instruments
Geuder AG recommends that their current
range of instruments be reprocessed in a
Miele washer-disinfector.
E 929/1 mobile unit with
drying connection
• 3 levels for approx. 6 OP sets
• Clearance:
Usable height Level 1: 94 mm
Usable height Level 2: 100 mm
Usable height Level 3: 287 mm
• Capacity: 6 DIN mesh trays
• 45 nozzles on the right-hand side
(23 male and 22 female
LuerLock adapters)
• 28 nozzles on left-hand side (horizontal),
each with hose and male LuerLock adapter
(E 792)
• Connections for
2 x E 478 on feed pipe
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 492, W 640, D 790 mm
Mat. no. 6893890
Art. no. 69.5929.02
58
Further accessories for MIS instruments on
Page 65.
Supplied as standard with:
• 14 LuerLock adapters female/female
(E 790)
• 14 connectors LuerLock female/male
(E 791)
• 2 x E 476 receptacles
• 1 x E 477 stop
E 478/1 adapter
• For 4 narrow-lumened cannulae
(Sautter cannulae)
Mat. no. 7292920
Art. no. 69.7478.02
FP ED
• Stainless-steel filter insert for E 478/1
• Ø 30 mm
Mat. no. 7290770
Art. no. 69.7512.02
Mobile unit for MIS instruments
E 915/3 mobile unit with
drying connection
• For approx. 7 AN sets or 20 breathing
tubes, max. length 1.5 m, and various
accessories
• Tubes wound around spiral drum
• Direct injection system
• Connection for hot-air drying unit
• Magnetic strip for automatic mobile
unit recognition
• H 637, W 640, D 790 mm
Supplied as standard with:
• 1 x E 142 insert 1/2, DIN mesh tray,
H 45/55, W 255, D 480 mm
• 10 x E 466 injector nozzles
for breathing bags, 8 x 333 mm
• 18 x E 496 injector nozzles, 4 x 120 mm
• 1 x E 916 holder for 5 paediatric breathing
tubes (supplied)
• 4 x E 917 holders for 5 silicone breathing
tubes
• 1 x E 918 holder for 5 paediatric breathing
tubes (supplied)
• 1 x E 431 injector nozzle for breathing
bags (supplied)
• 20 spring-loaded supports Ø 12 mm for
breathing tubes, max. 1.5 m
• 1 magnetic strip for automatic mobile unit
recognition
E 466 accessory for AN mobile unit
• Injector nozzle for breathing bags,
8 x 333 mm
Mat. no. 4966620
Art. no. 69.7466.01
E 496 accessory for AN mobile unit
(no illustration)
• Injector nozzle for intubation material,
4 x 120 mm
Mat. no. 5235490
Art. no. 69.7496.01
Mat. no. 6943870
Art. no. 69.5915.04
59
Mobile unit for MIS instruments and reprocessing
dental transmission instruments
E 926 modular insert
• For long shafted MIS instruments
• Sectioned for arthroscopes,
laparoscopes, etc.
• For up to 13 lumened instruments
• H 40, W 568, D 510 mm
Mat. no. 7297050
Art. no. 69.5926.01
E 909 mobile unit with
drying connection (empty)
• Modular system for approx. 1-2 MIS OP
sets
• Levels 1–3 vacant for mesh trays,
e.g. E 142
• Loading dimensions (from bottom):
Level 1: H 80, W 585, D 780 mm
Level 2: H 80, W 595, D 780 mm
Level 3: H 80, W 595, D 780 mm
Level 4: H 216, W 515, D 780 mm
• Connection for hot-air drying
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 698, W 640, D 790 mm
Mat. no. 7201500
Art. no. 69.5909.01
60
• Simultaneous cleaning of mesh trays and
MIS OP sets
E 926 includes:
• 1 x E 336 MIBO irrigation sleeve for
MIS instruments, Length 121 mm
• 2 x E 362 blanking screws, Ø 11 mm
• 5 x E 442 irrigation sleeves for MIS
instruments, length 121 mm, Ø 11 mm,
with cap Ø 6 mm
• 3 x E 443 irrigation sleeves for
MIS instruments,
Length 121 mm, Ø 11 mm, with cap
Ø 10 mm
• 2 x E 448 silicone tube with LuerLock
adapter, female
• 1 x E 454 injector nozzle for trocar sleeves,
10-15 mm
• 1 x E 464 sleeve for E 454 injector nozzle
• 2 x E 456 spring stays for MIS instruments
Mobile unit for MIS instruments and reprocessing
dental transmission instruments
E 902/1 mobile unit with
drying connection
• Modular system for approx.
3 MIS OP sets
• Accommodates up to 78 lumened
instruments in 6 modules with integrated
nozzles/adapters.
• Top and bottom levels free for mesh trays,
e. g. E 142
Upper level:
H 64, W 595, D 780 mm
Lower level:
H 53, W 585, D 780 mm
• Connection for hot-air drying
• Magnetic strip for automatic mobile unit
recognition (incl. ML magnets)
• H 620, W 640, D 790 mm
Supplied as standard with:
• 3 x E 905/1 modular insert
for short minimally invasive instruments
• 3 x E 906/1 modular inserts
for long minimally invasive instruments
• 3 x E 444 inserts/spiral racks for fibre optic
cables and irrigation tubes
• 2 x E 445, 12 caps for E 442
irrigation sleeves, Ø 6 mm
• 1 x E 446, 12 caps for E 443
irrigation sleeves, Ø 10 mm
• 2 m silicone hose,
Ø 5 mm, Part no. 4822830
• 6 x E 362 blanking screws
• Simultaneous cleaning of mesh trays and
MIS OP sets
Mat. no. 6059530
Art. no. 69.5902.02
61
Modules for E 902/1 mobile unit
E 903/1 modular insert
• for TUR sets
(transurethral resection)
• For up to 10 lumened instruments
• H 40, W 461, D 510 mm
Supplied as standard with:
• 3 x E 442 irrigation sleeves, 121 mm,
for MIS instruments, Ø 4–8 mm
• 1 x E 444 insert/spiral rack for fibre optic
cables and irrigation tubes
• 1 x E 447 female adapters,
for male LuerLock
• 4 x E 448 silicone hoses,
300 mm long, 5 x 1.5 mm
• 3 x E 453 injector nozzles
4.0 x 110 mm with spring supports
• 1 x E 454 injector nozzle
for trocar sleeves, 10-15 mm
• 3 x E 467 injector sleeves, 205 mm
for MIS instruments/forceps
• 3 x E 469 injector sleeves, 300 mm
for MIS instruments/urology
• 1 x E 907/1 insert / mesh tray
with lid for small instruments
• 2 m silicone hose, Ø 5 mm,
Part no. 4822830
• 1 plastic support
Mat. no. 6943230
Art. no. 69.5903.02
E 905/1 modular insert
• For short MIS instruments
• For up to 16 lumened instruments
• Sectioned for arthroscopes,
laparoscopes, etc.
• H 40, W 461, D 510 mm
E 906/1 modular insert
• For long shafted MIS instruments
• For up to 10 lumened instruments
• Sectioned for arthroscopes,
laparoscopes, etc.
• H 40, W 461, D 510 mm
Supplied as standard with:
• 1 x E 336 MIBO irrigation
sleeve for MIS instruments,
Length 121 mm, Ø 11 mm
• 2 x E 362 blanking screws
• 1 x E 442 irrigation sleeves
for MIS instruments, Length 121 mm,
Ø 11 mm, with cap Ø 6 mm
• 2 x E 447 female adapters,
for male LuerLock
• 4 x E 448 silicone tube
with LuerLock adapter, female
• 2 x E 449 male adapters,
for female LuerLock
• 4 x E 452 injector nozzles
2.5 x 60 mm
• 3 x E 453 injector nozzles
4.0 x 110 mm with spring supports
• 3 x E 454 injector nozzle
for trocar sleeves, 10-15 mm
• 1 x E 464 sleeve for
E 454 injector nozzle
• 1 x E 907/1 insert / mesh tray with lid for
small instruments
• 1 x E 472 clamps for
injector nozzle, Ø 4 mm
Supplied as standard with:
• 2 x E 362 blanking screws
• 5 x E 442 injector sleeves
for MIS instruments
• 3 x E 443 injector sleeves
for MIS instruments Ø 8–12 mm
• 2 x E 448 silicone tube
with LuerLock adapter
• 1 x E 454 injector nozzle
for trocar sleeves, 10-15 mm
• 2 x E 456 spring stays for
MIS instruments
• 1 x E 464 sleeve for
E 454 injector nozzle
• 1 x E 908/1 insert for separable
MIS instruments/inserts
• 1 x E 336 irrigation sleeve MIBO
Mat. no. 6943250
Art. no. 69.5906.02
Mat. no. 6943240
Art. no. 69.5905.02
Note
The modules can also be used on
module units E 574 (for G 7823/G 7824)
and E 774/1 (for G 7825/G 7826).
62
Module for E 902/3
for reprocessing dental instruments
Leading manufacturers recommend the
reprocessing of transmission instruments in
Miele thermal disinfectors.
E 919 dental module
• For connection of 10 turbines/hand-pieces
and contra-angles as well as dental and
ENT instruments
• Can be used on E 902/3 (new) as well as
E 902/1, E 774/1, E 574, E 474/4
• Items should be reprocessed in the
VARIO TD programme
• Cleaning should be performed using
neutral to mildly alkaline liquid detergents
• Combination with MIS instruments
possible
Note: 10 AUF supplied. ADS must be
ordered separately.
Mat. no. 7759490
Art. no. 69.5919.01
E 902/3 mobile unit (empty)
Mat. no. 6 943 830
Art. no. 69.5902.04
Note
The module can also be used on
E 574 (for G 7823/G 7824) and E 774/1
(for G 7825/G 7826).
AUF 1 for G 7881 and G 7891
• Sleeve for transmission instruments in
O 177/1 upper basket
• Consists of: Seal, threaded bush, bracket,
filter housing – lower section, filter housing
– upper section
• 5 filter inserts
AUF 2 for G 7831
• Sleeve for transmission instruments in
O 801/2 upper basket
• Consists of: Seal, threaded bush, bracket,
filter housing – lower section, filter housing
– upper section
• 5 filter inserts
FP filter inserts for AUF 1 and AUF 2
• 20 units
• Porosity 2
• Ø 30 mm
For connection of
transmission instruments
For AUF 1 and AUF 2
• ADS 1 (white): approx. 20 mm
• ADS 2 (green): approx. 16 mm
• ADS 3 (red): approx. 22 mm
63
Cross-product accessories
E 336 injector sleeve
MIBO 1
• Length 121 mm, Ø 11 mm
Mat. no. 3809390
Art. no. 69.7336.01
/ 0 1 2 3
E 469 irrigation sleeve /
• For MIS instruments/urology
• Length 300 mm, Ø 11 mm
• Cap, 6 mm orifice
(Mat. no. 4174960)
• Clamp
(Mat. no. 4174850)
Mat. no. 5563950
Art. no. 69.5469.01
E 467 sleeve 0
• For MI instruments/
forceps
• Length 205 mm, Ø 11 mm
Mat. no. 5039640
Art. no. 69.5467.01
E 442 sleeve 2
• For MIS instruments
Ø 4-8 mm, screw thread
• Length 121 mm, Ø 11 mm
• Cap, 6 mm orifice
(Mat. no. 4174960)
• Clamp
(Mat. no. 4174850)
Mat. no. 4203830
Art. no. 69.7442.01
E 443 sleeve 3
• For MIS instruments
Ø 8-8.5 mm
• Length 121 mm, Ø 11 mm
• Cap, 10 mm orifice
(Mat. no. 4174970)
• Clamp
(Mat. no. 4174850)
0
/
E 445 caps
• 12 caps for irrigation sleeves
• Ø 6 mm orifice
Mat. no. 4203850
Art. no. 69.7445.01
E 446 caps
• 12 caps for irrigation sleeves
• Ø 10 mm orifice
Mat. no. 4203860
Art. no. 69.7446.01
E 456 spring stay /
• For MIS instruments
Mat. no. 4203960
Art. no. 69.7456.01
E 475 holder bracket 0
• For MIS insert
• To stabilise irrigation
sleeves
(Mat. no. 4692430)
Mat. no. 5226040
Art. no. 69.7475.01
Mat. no. 4203840
Art. no. 69.7443.01
E 449 adapter, male, without
centre pin 1
• For LuerLock, female, screw
thread for E 450/1,
O 176, O 183
Mat. no. 4203890
Art. no. 69.7449.01
/ 0 1 2 34
E 447 female adapter /
• For LuerLock, male, screw
thread for E 450/1,
O 176, O 183
Mat. no. 4203870
Art. no. 69.7447.01
E 517 adapter, male,
with centre pin 0
• For LuerLock, female,
screw thread for E 450/1,
O 176, O 183
Mat. no. 7790040
Art. no. 69.7517.01
64
E 452 injector nozzle 2
• Length 60 mm, Ø 2.5 mm,
screw-thread, for mobile
injector unit
Mat. no. 4203920
Art. no. 69.7452.01
E 453 injector nozzle 3
• Clip bracket
• Length 110 mm, Ø 4 mm,
screw-thread, for mobile
injector unit
Mat. no. 4203930
Art. no. 69.7453.01
E 448 silicone hose 4
• LuerLock adapter, male
• Length 300 mm, Ø 5 mm
• Injector nozzle, thread 8 x 1 mm
Mat. no. 4203880
Art. no. 69.7448.01
E 464 adapter
• For E 454 injector nozzle
13 x 65 mm
• Height-adjustment clip
(Mat. no. 4692440)
Mat. no. 4837600
Art. no. 69.7464.01
E 454 injector nozzle
• For trocar sleeves with
a diameter of 10–15 mm, 8 x
150 mm
• Height-adjustment clip
(Mat. no. 4692430)
Mat. no. 4203940
Art. no. 69.7454.01
E 471 spring clamp
• For injector nozzle
Ø 2.5 mm, for E 452
Mat. no. 4451930
Art. no. 69.7471.01
E 472 spring clamp
• For injector nozzle
Ø 4.0 mm, for E 351, E 453
Mat. no. 4451960
Art. no. 69.7472.01
Cross-product accessories
E 791 1
Connector
LuerLock female/male
Mat. no. 6390720
Art. no. 69.7790.01
/
0
1
E 792 /
Male LuerLock connector with
silicone hose
Mat. no. 6989160
Art. no. 69.7792.01
Adapters available
individually:
• Pack of 4 x E 790
LuerLock female/female
• Pack of 4 x E 791
LuerLock female/male
• Pack of 4 x E 792
LuerLock male with silicone
hose
(160 mm)
E 790 0
Connector
LuerLock adapters, female/
female
Mat. no. 7217650
Art. no. 69.5006.01
Mat. no. 6390710
Art. no. 69.7790.01
E 142 insert 1/2
• DIN mesh tray
• 1 mm wire gauge
• 5 mm mesh size
• 5 mm all-round frame
• 2 hinged handles
• Max. load 10 kg
• H 45/55, W 255, D 480 mm
Illustration shows E 142 with
E 476 receptacles and E 477
stops
A 6 Cover net 1/2
• 215 x 445 mm
• Stainless-steel frame
with polyamide mesh
(particularly stable and
durable)
• For example for E 142
mesh tray
• Suitable for opthalmology
E 476 adapters
• For use in mesh trays with
5 mm mesh,
(e.g. E 142)
• 50 per bag
• For instruments with a
diameter of 4-8 mm
E 479 adapters
• For use in mesh trays with
5 mm mesh,
(e.g. E 142)
• 50 per bag
• For instruments with a
diameter of up to 4 mm
Mat. no. 5692400
Art. no. 69.7476.01
Mat. no. 6553750
Art. no. 69.7479.01
E 477 stoppers
• For use in mesh trays with
5 mm mesh,
(e.g. E 142)
• 20 per bag
Mat. no. 5692390
Art. no. 69.7477.01
Mat. no. 3830300
Art. no. 69.5142.01
65
Inserts for GYN and ENT instruments
E 416 insert 1/4
• For 6 one or two-piece
speculae
• 7 holders,
spacing 40 mm
• For upper or lower basket
• H 157, W 178, D 279 mm
Mat. no. 3888650
Art. no. 69.5416.01
E 374 insert 2/5
• for ENT instruments such as
inhalation tubes, etc.
• 24 compartments, approx.
45 x 45 mm
• 27 compartments, approx.
12 x 12 mm
• Mesh size of base: 1.7 mm
• For upper or lower basket
• H 63, W 173, D 445 mm
Mat. no. 3809800
Art. no. 69.5374.01
66
E 417/1 insert 2/5
• For approx. 30 ear and
nose speculae and Brünings
tongue spatulas
• 280 compartments, approx.
13 x 13 mm
• Mesh size of base: 1.7 mm
• For upper or lower basket
• H 63, W 173, D 445 mm
Mat. no. 9033260
Art. no. 69.5417.02
E 803 insert 2/5
• For ear and nose speculae
• 160 compartments, approx.
13 x 13 mm
• Mesh size of base: 1.7 mm
• For upper or lower basket
• H 63, W 165, D 317 mm
Mat. no. 4637750
Art. no. 69.5803.01
E 373 insert 1/6
• For ENT instruments
(e.g. ear specula).
• Wire mesh, mesh size:
Base 3 mm, Sides 1.7 mm,
Lid 3 mm
• 28 upright supports
• 2 hinged handles
• For upper or lower basket
• H 55, W 150, D 225 mm
Mat. no. 3809790
Art. no. 69.5373.01
Mesh trays/baskets
E 146 insert 1/6
• Mesh size on base 3 mm
• Mesh size of sides 1.7 mm
• Mesh size of lid 8 mm
• 2 hinged handles
• For upper or lower basket
• H 55, W 150, D 225 mm
Mat. no. 3346680
Art. no. 69.5146.01
E 363 insert 1/6
(not illustrated)
• Mesh size 1 mm, with lid
• For upper or lower basket
• H 55, W 150, D 225 mm
E 373 insert 1/6
• For ENT instruments
(e.g. ear specula).
• Wire mesh, mesh size:
Base 3 mm, Sides 1.7 mm,
Lid 3 mm
• 28 upright supports
• 2 hinged handles
• For upper or lower basket
• H 55, W 150, D 225 mm
E 441/1 insert 1/4
• For micro instruments
• Mesh size on base 1.7 mm
• Solid sides, stackable
• Internal divisions with
6 adjustable supports
provide the ideal storage for
instruments.
• For upper or lower basket
• H 60, W 183, D 284 mm
Mat. no. 3809790
Art. no. 69.5373.01
Mat. no. 5988240
Art. no. 69.5441.02
E 473/1 mesh insert
with lid
• Mesh basket with lid for small
instruments
• Hooks in place
• H 85, W 60, D 60 mm
E 451 insert 1/6
• Mesh tray with lid for sundry
small items
• Wire gauge:
1 mm base
0.8 mm sides
1 mm lid
Mesh gauge:
3 mm base
1.7 mm sides
3 mm lid
• H 55, W 150, D 225 mm
Mat. no. 3149790
Art. no. 69.5363.01
E 131/1 insert 1/2
• For 5 mesh trays/kidney
dishes
• 6 holders, H 160 mm, spacing
80 mm
• For lower basket
• H 168, W 180, D 495 mm
Mat. no. 5771030
Art. no. 69.5131.02
Mat. no. 5341570
Art. no. 69.5473.02
Mat. no. 4203910
Art. no. 69.5451.01
67
Cover nets, inserts, lids
E 379 insert 1/2
• for various inserts
• 0.8 mm wire gauge
• 1.7 mm mesh size
• 5 mm all-round frame
• 2 handles
• For upper or lower basket
• H 80/110, W 180, D 445 mm
E 378 insert 1/1
• for various inserts
• 0.8 mm wire gauge
• 1.7 mm mesh size
• 5 mm all-round frame
• 2 handles
• For lower basket
• H 80/110, W 460, D 460 mm
Mat. no. 3203500
Art. no. 69.5379.01
Mat. no. 3203530
Art. no. 69.5378.01
UTS Utensil box
• For sundry small items,
with lid
• 3 compartments,
compartment size
115 x 100 mm
• H 93, W 102, D 350 mm
E 430/1 insert
1/3 mesh tray
• Wire mesh, mesh size 5 mm
• H 40, W 150, D 445 mm
Mat. no. 3810260
Art. no. 69.7410.01
Mat. no. 6643200
Art. no. 69.7430.03
E 143 insert 1/4
• Mesh tray
• 1 mm wire gauge
• 5 mm mesh size
• 5 mm all-round frame
• 2 hinged handles
• Max. load 5 kg
• For upper or lower basket
• H 45/55, W 255, D 230 mm
Mat. no. 3830310
Art. no. 69.5143.01
E 142 insert 1/2
• DIN mesh tray
• 1 mm wire gauge
• 5 mm mesh size
• 5 mm all-round frame
• 2 hinged handles
• Max. load 10 kg
• H 45/55, W 255, D 480 mm
Mat. no. 3830300
Art. no. 69.5142.01
E 468 1/4 mesh insert with
lid and compartments
• for various inserts
• Made from welded crosswires/stainless steel with lid
and compartments
• Mesh size 5 x 5 x 1 mm
• H 70/76, W 250, D 170 mm
A 18 1/2 lid
• For insert E 484
• For insert E 142
as 1/1 cover
• 1 mm wire mesh
5 mm mesh gauge
4 mm all-round frame
• H 20, W 430, D 230 mm
Mat. no. 5043640
Art. no. 69.5468.01
Mat. no. 5631080
Art. no. 69.7450.06
A 16 1/2 lid (not illustrated)
• For Insert E 142
• 230 x 215 mm
• Stainless steel
Mat. no. 3981990
Art. no. 69.7450.04
68
Inserts, mesh trays
E 908/1 insert
• For separable minimally
invasive instruments or fibre
optics
• Mesh width 8 x 1 mm,
(base), sides closed
• Internal dividers can be
repositioned with 4 supports
• Hooks to slot into E 906/1
• H 36, W 130, D 460 mm
E 907/1 insert/mesh tray
• For sundry small items,
with lid
• Mesh size 3 x 1 mm
• Hooks to slot into
E 905/1 and E 903/1
• H 48, W 129, D 170 mm
Mat. no. 6943820
Art. no. 69.5907.02
Mat. no. 5704010
Art. no. 69.5908.02
E 460 insert 1/4
• For rigid fibre optics of varying
lengths
• Mesh size, Base
8 x 1 mm
Sides/lid 7 x 7 x 3 mm
• With 3 holders for
2 rigid fibre optics of varying
length
• H 53, W 100, D 430 mm
Mat. no. 4861390
Art. no. 69.5460.01
E 457 insert 1/2
• For separable MIS
instruments (e.g. 12 handles
and inner shafts)
• Mesh base, 3 mm mesh size,
solid sides
• Welded holders for 8–12
handles,
variable arrangement,
with 3 holders for storing
and securing 8–12 shafts
from disassembled MIS
instruments
• H 62, W 192, D 490 mm
Mat. no. 4618030
Art. no. 69.5457.02
E 473/1 insert/filter
• Mesh basket with lid for small
instruments
• for hooking onto mesh trays
• H 85, W 60, D 60 mm
Mat. no. 5341570
Art. no. 69.5473.02
E 444 insert/drum
• For fibre optics and
irrigation tubes
• Fibre optics and
tubes wound spirally
around drum
• H 168 mm,
with folding clip, 214 mm
• Ø 140 mm
E 362 blanking screw
• M 8 x 1 thread, to close
connectors on mobile units
Mat. no. 3809630
Art. no. 69.7362.01
Mat. no. 4637700
Art. no. 69.5444.01
69
Transport trolleys
MF/3 for G 7823/G 7824/G 7825/G 7826
• Trolley to simplify the handling of mobile
injector units
• Footswitch-operated height-adjustment
mechanism
• 4 lockable wheels
• H 1182, W 660, D 807 mm, +/– 100 mm
• Docking height 751 mm, +/– 100 mm
Mat. no. 6392900
Art. no. 69.2001.07
MF 27/28-1 for PG 8527/PG 8528
• 4 lockable wheels, Ø 100 mm
• Both ends can dock onto machine, tables,
sluices or conveyors.
• Docking height 850, –100, + 150 mm
• H 1050, W 740, D 930 mm
• With removable drip tray
H 70, W 603, D 866 mm
Mat. no. 7397640
Art. no. 69.2001.11
70
Article overview
Article
Page
Article
Page
Article
Page
A6
65
E 488
33
E 948
57
A 7/1
30
E 489
32
E 949
57
A 16
68
E 492
55
E 955
57
A 18
68
E 496
21, 37, 59
E 975/2
52
Cover plate (23/24)
13
E 515/1
21
E 980
53
DE 23
13
E 517
64
E 984
54
DK 23/24
12
E 524/2
17
E 985
55
DK 25/26
27
E 525/2
16
E 986
55
DK 27/28
49
E 526/1 TA
18
E 987
54
DOS 10/30 (23/24)
13
E 527/2
17
E 989
DOS 10/30 (25/26)
27
E 528/2
17
FP-ED
54
20, 36, 58
67
E 529
20
MAV 23/24
13
E 142
65, 68
E 550
16
MAV 25/26
27
E 143
68
E 555/2
17
MAV 27/28
49
E 146
67
E 574
19
MF/3
70
E 336
64
E 701/2 TA
31
MF 27/28-1
70
E 362
69
E 702
16, 31
ML
13
E 363
67
E 703/1
17, 31
ORTHOVARIO module (23/24)
13
E 373
66, 67
13
E 374
E 378
E 131/1
E 705/2 TA
34
OXIVARIO module (23/24)
66
E 710/1
33
MVA
27
68
E 711/1
33
ORTHO (23/24)
13
E 379
68
E 713 TA
33
ORTHOVARIO (27/28)
49
E 416
66
E 715/1 TA
37
OXIVARIO
49
E 417/1
66
E 729 TA
36
OXI-NRS1-G 7823/G 7824
13
E 430/1
68
E 730
16, 32
OXI-NRS1-G 7825/G 7826
27
E 441/1
67
E 735/2
30
OXI-NRS2-G 7825/G 7826
27
E 442
64
E 750
17
Printer
48
E 443
64
E 774/1 TA
35
PRT/1
13, 26
E 444
69
E 775/1
30
SBW
48
E 445
64
E 790
65
SBW/1
48
E 446
64
E 791
65
SBW/2
26
E 447
64
E 792
65
SBW/4
12
E 448
64
E 803
66
SBWR
48
E 449
64
E 900-4/2
52
SBWR/2
26
E 451
67
E 900-5/2
52
SBWR/3
12
E 452
64
E 901/2 TA
53
TA/D
49
E 453
64
E 902/1 TA
61
TA/E
49
E 454
64
E 902/3
63
TA-S1
12
E 456
64
E 903/1
62
TK/1
55
E 457
69
E 905/1
62
UTS
68
E 460
69
E 906/1
62
E 464
64
E 907/1
69
E 466
21, 37, 59
E 908/1
69
E 467
64
E 909 TA
60
E 468
68
E 910/4
56
E 469
64
E 911/3
56
E 471
64
E 912/2
56
E 472
64
E 913/3
56
E 915/3 TA
59
63
E 473/1
67, 69
E 475
64
E 919
E 476
65
E 926
60
E 477
65
E 929/1 TA
58
20, 36, 58
E 930
54
E 479
65
E 931
54
E 484
16, 32
E 934/1
56
E 485
32
E 935/2
E 486
32
E 936
E 487
16, 32
E 478/1
E 941 TA
52
17, 33, 55
57
71
Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh
P.O. box, D-33325 Gütersloh
www.miele-professional.com
[email protected]
Miele worldwide:
AUSTRALIA
Miele Australia Pty. Ltd.
1 Gilbert Park Drive
Knoxfield, VIC, 3180
Tel. +61 3 97647130
Telefax +61 3 97647149
AUSTRIA
Miele Gesellschaft mbH.
Mielestraße 1
5071 Wals/Salzburg
Tel. +43 50 800-81 481
Telefax +43 50 800-81 429
BELGIUM
N.V. Miele S.A.
z.5 Mollem 480
Hof te Bollebeeklaan 9
1730 Mollem
Tel. +32 2451 14 11
Telefax +32 2451 14 14
CANADA
Miele Limited
161 Four Valley Drive
Vaughan, ON L4K 4V8
Tel. +1 905 660-9936
Telefax +1 904 532-2290
CHILE
Miele Ltda.
Nueva Costanera 4055
Vitacura
Santiago de Chile
Tel. +56 2 95700-00
Telefax +56 2 95700-79
CHINA
Miele Beijing Rep. Office
3W Suite 512, Oriental Plaza,
1 East Chang An Avenue
Dong Cheng District
Beijing 100738, P.R. China
Tel. +86 10 85151919
Telefax +86 10 85181797
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road,
Jing’An District
200040 Shanghai, China
Tel. +86 21 61573500
Telefax +86 21 61573511
CROATIA
Miele trgovina i servis d.o.o.
Buzinski prilaz 32
10000 Zagreb
Tel. +385 1 66 89 000
Telefax +385 1 66 89 090
CZECH REPUBLIC
Miele spol. s.r.o.
Holandská 4
63900 Brno
Tel. +420 5 4 35 53-1 11
Telefax +420 5 4 35 53-1 19
DENMARK
Miele A/S
2600 Glostrup, Erhvervsvej 2
Tel. +4543271100
Tel. Salg/Professional
+4543271500
Tel. Jylland +4597127066
Telefax hovednr. +4543271109
Telefax Salg/Professional
+4543271509
ESTONIA
Miele OÜ
Tornimäe 5
10145 Tallinn
Tel. +372 6 55 68 11
FINLAND
Miele Oy
Porttikaari 6
01200 Vantaa
Tel. +358 9 87 59 70
Telefax +358 9 87 59 72 99
FRANCE
Miele S.A.S.
9 avenue Albert Einstein
93151-Le Blanc-Mesnil (Paris)
Tel. +33 1 49 39 34 44
Telefax +33 1 49 39 44 38
GERMANY
Miele & Cie. KG
Carl-Miele-Straße 29
D-33332 Gütersloh
Tel. 0 180 220 21 21 (6 ct)*
Telefax 0 800 225 57 55
*Only in Germany
GREAT BRITAIN
Miele Co. Ltd.
Fairacres
Marcham Road, Abingdon
Oxon OX14 1TW
Tel. 0845 330 3618
Telefax 01235 405636
GREECE
Miele Hellas E.P.E.
Mesogion 257
154 51 N. Psychiko-Athen
Tel. national 01 10 6 79 44 44
international +30 2 10 6 79 44 44
Telefax 01 10 6 79 42 09
international +30 2 10 6 79 42 09
HUNGARY
Miele Kft.
Alsó Törökvész út 2.
1022 Budapest
Tel. +36 1 8806-400
Telefax +36 1 8006-402
HONG KONG
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road,
Kowloon Bay
Tel. +852 2610 1331
Telefax +852 2610 1013
INDIA
Miele India Pvt. Ltd.
Ground Floor,
Copia Corporate Suites,
Plot No. 9, Jasola,
New Delhi – 110025
Tel. +91 11 469000-00
Telefax +91 11 469000-01
IRELAND
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel. +353 1 461 07 10
Telefax +353 1 461 07-97
An active contribution towards protecting the environment:
This brochure is printed on paper bleached without the use of chlorine.
ITALY
Miele Italia S.r.l.
Strada di Circonvallazione, 27
39057 S. Michele-Appiano (BZ)
Tel. +39 04 71 66 61 11
Telefax +39 04 71 66 63 50
NEW ZEALAND
Miele New Zealand Ltd.
Unit L, 10–20 Sylvia Park Road
Mt. Wellington, 1060 Auckland
Tel. +64 9573 1269
Telefax +64 9573 1268
SPAIN
Miele S.A.U.
Carretera de Fuencarral, 20
28108 Alcobendas (Madrid)
Tel. +34 91 6 23 20 00
Telefax +34 91 6 62 02 66
JAPAN
Miele Japan Corp.
E Space Tower 11F
3-6 Maruyamacho
Shibuya-ku Tokyo
150-0044 Japan
Tel. +81(3)5784-0030
Telefax +81(3)5784-0035
NORWAY
Miele AS
Løxaveien 13
1351 Rud
Tel. +47 67 17 31 00
Telefax +47 67 17 31 10
SWEDEN
Miele AB
Industrivägen 20
Box 1397
171 27 Solna
Tel. +46 85 62 29-000
Telefax +46 85 62 29-209
KAZAKHSTAN
Miele LLP
Building 1B (office 602)
Al-Farabi Pr. 13
050059 Almaty
Tel. +7 727 3111141
Telefax +7 727 3111042
KOREA
Miele Korea Limited
Miele Haus 8 fl.,
607-10 Yeoksam-dong
Gangnam-gu
Seoul 135-080
Tel. +82 2 3451 9353
Telefax +82 2 3451 9399
LATVIA
Miele SIA
Zaubes Str. 9A-38
1013 Riga
Tel. +371 67889877
Telefax +371 67889879
LITHUANIA
Miele Appliances UAB
S. Zukausko g. 2/3-116
08240 Vilnius
Tel. +370 52487529
Telefax +370 52487529
LUXEMBOURG
Miele s.à r.l.
20, Rue Christophe Plantin
2339 Luxembourg
Tel. +352 4 97 11-25
Telefax +352 4 97 11-39
MALAYSIA
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Kencana Petroleum
Solaris Dutamas
No. 1, Jalan Dutamas 1
Kuala Lumpur 50480
Tel. +603 6205 3899
Telefax +603 6205 3998
MEXICO
Miele S.A. de C.V.
Av. Santa Fé 170
German Centre 0-4-2
Col. Lomas de Santa Fé
C.P. 01210 México, D.F.
Tel. +52 55 85 03 98 70
Telefax +52 55 85 03 98 74
NETHERLANDS
Miele Nederland B.V.
De Limiet 2
4131 NR Vianen
Tel. +31 3 47 37 88 83
Telefax +31 3 47 37 84 29
POLAND
Miele Sp. z. o. o.
ul. Gotarda 9
02-683 Warszawa
Tel. +48 22 5 48 40 00
Telefax +48 22 5 48 40 10
PORTUGAL
Miele Portuguesa, Lda.
Av. do Forte, 5
2790-073 Carnaxide
Tel. +351 21 42 48-100
Telefax +351 21 42 48-109
ROMANIA
Miele Appliances SRL
Intrarea Narciselor 8
Otopeni
Jud. Ilfov
Tel. +40 21 3520777
Telefax +40 21 3520776
RUSSIA
000 Miele CIS
Leningradsky Prospekt, 31A, bld. 1
125284 Moscow
Tel. +7 495 745-8992
Telefax +7 495 745-8680
SERBIA
Miele d.o.o. Beograd
Balkanska 2
Beograd – Stari Grad 11000
Tel. +381 11 2055060
Telefax +381 11 2055065
SINGAPORE
Miele Pte. Ltd.
163 Penang Road
#04-02/03 Winsland House II
Singapore 238463
Tel. +65 67 35 11 91
Telefax +65 67 35 11 61
SLOVAKIA
Miele s. r. o.
Plynárenská 1
82109 Bratislava
Tel. +421 2 58 10 31 11
Telefax +421 2 58 10 31 19
SWITZERLAND
Miele AG
Limmatstr. 4
8957 Spreitenbach
Tel. +41 56 4 17 20 00
Telefax +41 56 4 17-24 69
TURKEY
Miele Elektrikli Aletler
Dış. Tic. ve Paz. Ltd. Şti.
Güvercin Sokak No. 10
34330 Levent-Istanbul
Tel. +90 2 12 3 86-08 00
Telefax +90 2 12 3 25 84 49
UKRAINE
Miele LLC
Zhylyanskaya Str. 48, 50 A
01033 Kiev
Tel. +38 044 4960300
Telefax +38 044 4942285
UNITED ARAB EMIRATES
Miele Appliances Ltd.
Gold & Diamond Park
Sheikh Zayed Road
Building No. 6,
Offices No. 219
Dubai
Tel. +971 4 3418444
Telefax +971 4 3418852
USA
Miele, Inc.
9 Independence Way
Princeton, NJ 08540
Tel. 001-800 843 72 31
Telefax 001-609 419 42 41
OTHER COUNTRIES:
Sales International
Miele & Cie. KG
Carl-Miele-Straße 29
D-33332 Gütersloh
Tel. +49 52 41-89 15 07
Telefax +49 52 41-89 15 00
SLOVENIA
Miele d.o.o.
Brnč ič eva ulica 41 g
1231 Ljubljana – Črnuče
Tel. +386 1563 44-80
Telefax +386 1563 44-90
SOUTH AFRICA
Miele (Pty) Ltd.
63 Peter Place
Bryanston 2194
Tel. +27(0)11 5 48-19 00
Telefax +27(0)11 5 48-19 35
© Miele & Cie. KG, Gütersloh / Mat. no. 7 941 072 / All rights reserved (44) - 11/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement