Teccor brand Thyristors Sxx10xSx & Sxx10x Series 10 Amp Sensitive & Standard SCRs

Teccor brand Thyristors Sxx10xSx & Sxx10x Series 10 Amp Sensitive & Standard SCRs
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Sxx10xSx & Sxx10x Series
RoHS ®
Description
Excellent unidirectional switches for phase control and
general switching applications such as heating, motor
control controls, converters / rectifiers and capacitive
discharge ignitions.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
Agency Approval
Agency
• Glass – passivated
junctions
Agency File Number
TO-220L Package : E71639
®
• Voltage capability up
to 1000 V
• Surge capability up
to 100 A
Applications
Main Features
Symbol
Value
Unit
10
A
400 to 1000
V
0.2 to 15
mA
IT(RMS)
VDRM /VRRM
IGT
Additional Information
Datasheet
Typical applications includes capacitive discharge system
for motorcycle engine CDI, portable generator engine
ignition, strobe lights and nailers, as well as generic
rectifiers, battery voltage regulators and converters. Also
controls for power tools, home/brown good and white
goods appliances.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
A
Resources
K
Samples
G
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
IT(RMS)
RMS on-state current
Average on-state current
IT(AV)
Test Conditions
Sxx10LSy
TC = 80°C
Sxx10RSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Sxx10LSy
TC = 80°C
Sxx10RSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Value
Unit
10
A
6.4
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
ITSM
Peak non-repetitive surge current
I 2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate of rise of on-state current
f = 60 Hz ; TJ = 110°C
100
A/μs
Peak gate current
TJ = 110°C
1
A
Average gate power dissipation
TJ = 110°C
0.1
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
Value
Unit
10
A
6.4
A
di/dt
IGM
PG(AV)
Tstg
TJ
A
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
Parameter
RMS on-state current
Test Conditions
Sxx10L
TC = 95°C
Sxx10R
Sxx10D
Sxx10V
TC = 105°C
Sxx10L
TC = 95°C
Sxx10R
Sxx10D
TC = 105°C
Sxx10V
single half cycle; f = 50Hz;
TJ (initial) = 25°C
single half cycle; f = 60Hz;
TJ (initial) = 25°C
IT(AV)
Average on-state current
ITSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate-of-rise of on-state current
f = 60 Hz TJ = 125°C
100
A/μs
Peak gate current
TJ = 125°C
2
A
Average gate power dissipation
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
di/dt
IGM
PG(AV)
Tstg
TJ
83
A
100
Note: xx = voltage
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
IGT
VGT
Value
Test Conditions
Sxx10xS2
MAX.
VD = 6V RL = 100 Ω
Sxx10xS3
200
500
Unit
μA
MAX.
0.8
V
dv/dt
VD = VDRM; RGK = 1kΩ ; TJ = 110°C
TYP.
8
V/μs
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 110°C
MIN.
0.2
V
VGRM
IGR = 10μA
MIN.
IH
IT = 20mA (initial)
MAX.
6
8
mA
tq
(1)
MAX.
50
45
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 12A
TYP.
4
5
μs
6
V
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Symbol
IGT
VGT
Value
Test Conditions
Sxx10x
VD = 12V RL = 60 Ω
VD = VDRM; gate open; TJ = 100°C
MAX.
15
mA
MAX.
1.5
V
400V
350
600V
300
800V
dv/dt
1000V
250
MIN.
400V
VD = VDRM; gate open; TJ = 125°C
VGD
IH
tq
tgt
Unit
100
V/μs
250
600V
225
800V
200
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
MIN.
0.2
V
IT = 200mA (initial)
MAX.
30
mA
(1)
MAX.
35
μs
TYP.
2
μs
IG = 2 x IGT; PW = 15µs; IT = 20A
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
IT = 20A; tp = 380 µs
VTM
Sxx10xyy
IDRM / IRRM
Sxx10x
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
1.6
V
400 - 600V
5
TJ = 110°C
400 - 600V
250
400 - 800V
10
TJ = 100°C
TJ = 125°C
Note: xx = voltage, x = package, yy = sensitivity
Unit
TJ = 25°C
TJ = 25°C
VDRM / VRRM
MAX.
Value
1000V
MAX.
20
400 - 800V
200
1000V
3000
400 - 800V
500
μA
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Thermal Resistances
Symbol
Parameter
Value
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Sxx10RSy
1.6
Sxx10LSy
3.0
Sxx10VSy
1.7
Sxx10DSy
1.45
Sxx10R
1.6
Sxx10L
3.0
Sxx10V
1.7
Sxx10D
1.45
Sxx10RSy
40
Sxx10LSy
65
Sxx10VSy
85
Sxx10R
40
Sxx10L
50
Sxx10V
70
Unit
°C/W
°C/W
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: Normalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
Junction Temperature (TJ) -- (°C)
85
110
3.0
2.0
1.0
0.0
-40
-15
10
35
60
85
110
125
Junction Temperature (TJ) -- (°C)
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: Normalized DC Holding Current
vs. Junction Temperature
2.0
Ratio of IH / IH (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
2.0
1.5
1.0
0.5
0.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
Junction Temperature (TJ) -- (°C)
Figure 5: On-State Current vs. On-State
Voltage (Typical)
85
110
125
9
10
10
Average On-State Power Dissipation
[PD(AV)] -- (Watts)
TJ = 25ºC
Instantaneous On-state Current
(iT) – Amps
60
Figure 6: P
ower Dissipation (Typical) vs. RMS
On-State Current
32
28
24
20
16
12
8
4
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
9
8
7
6
5
4
3
2
1
0
1.6
0
1
2
Instantaneous On-state Voltage (vT) – Volts
130
125
125
Maximum Allowable Case
Temperature (TC) - °C
110
105
100
Sxx10RSy
Sxx10DSy
Sxx10VSy
95
90
Sxx10LSy
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
75
5
6
7
8
120
Sxx10R
Sxx10D
Sxx10V
Sxx10L
115
4
Figure 8: M
aximum Allowable Case Temperature
vs. Average On-State Current
130
120
3
RMS On-State Current [IT(RMS)] -- (Amps)
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Maximum Allowable Case
Temperature (TC) - °C
35
Junction Temperature (TJ) -- (°C)
115
Sxx10R
Sxx10D
Sxx10V
5
6
110
105
100
Sxx10RSy
Sxx10DSy
Sxx10VSy
95
90
Sxx10LSy
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
75
70
Sxx10L
70
0
1
2
3
4
5
6
7
8
RMS On-State Current [IT(RMS)] - Amps
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
9
10
11
0
1
2
3
4
Average On-State Current [IT(AVE)] - Amps
7
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
100
Maximum Allowable Ambient
Temperature (TA) - °C
Maximum Allowable Case Temperature
(TC) - °C
120
Sxx10L
80
Sxx10V
Sxx10RSy
Sxx10LSy
60
40
Sxx10VSy
20
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
100
Sxx10L
80
Sxx10RSy
Sxx10LSy
60
Sxx10V
40
Sxx10VSy
20
0
0
0.0
0.5
1.0
1.5
0.0
2.5
2.0
0.5
Average On-State Current [IT(RMS)] - Amps
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: P
eak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
1000
100
ITRM
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
10
0.5
0.0
10.0
1.0
0
50.0
Pulse Current Duration (tW) - ms
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 13: S
urge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Peak Temperature (TP)
+0/-5
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
Time
°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
Environmental Specifications
Test
AC Blocking
Temperature Cycling
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Ramp-do
Ramp-down
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Product Selector
Voltage
Part Number
400V
600V
800V
1000V
Gate Sensitivity
Type
Package
Sxx10RS2
X
X
0.2mA
Sensitive SCR
TO-220R
Sxx10LS2
X
X
0.2mA
Sensitive SCR
TO-220L
Sxx10VS2
X
X
0.2mA
Sensitive SCR
TO-251
Sxx10DS2
X
X
0.2mA
Sensitive SCR
TO-252
Sxx10RS3
X
X
0.5mA
Sensitive SCR
TO-220R
Sxx10LS3
X
X
0.5mA
Sensitive SCR
TO-220L
Sxx10VS3
X
X
0.5mA
Sensitive SCR
TO-251
Sxx10DS3
X
X
0.5mA
Sensitive SCR
TO-252
Sxx10R
X
X
X
X
15mA
Standard SCR
TO-220R
Sxx10L
X
X
X
X
15mA
Standard SCR
TO-220L
Sxx10V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx10D
X
X
X
X
15mA
Standard SCR
TO-252
Note: xx = Voltage
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
Anode
E
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
Anode
GATE
F
G
I
L
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
1.60
.063
P
Q
C
1.80
.071
GATE
F
Cathode
Anode
AREA : 0.040 IN2
3
.118
G
I
O
L
K
M
N
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
J
H
4.60
.181
Inches
Min
Typ
Millimeters
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
O
A
E
Dimension
8.13
.320
P
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
CATHODE
ANODE GATE
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
10 Amp Sensitive & Standard SCRs
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx10L/Ryy
Sxx10L/Ryy
2.2 g
Bulk
500
Sxx10L/RyyTP
Sxx10L/Ryy
2.2 g
Tube
500 (50 per tube)
Sxx10DyyTP
Sxx10Dyy
0.3 g
Tube
750 (75 per tube)
Sxx10DyyRP
Sxx10Dyy
0.3 g
Embossed Carrier
2500
Sxx10VyyTP
Sxx10Vyy
0.4 g
Tube
750 (75 per tube)
Sxx10L/R
Sxx10L/R
2.2 g
Bulk
500
Sxx10L/RTP
Sxx10L/R
2.2 g
Tube
500 (50 per tube)
Sxx10DTP
Sxx10D
0.3 g
Tube
750 (75 per tube)
Sxx10DRP
Sxx10D
0.3 g
Embossed Carrier
2500
Sxx10VTP
Sxx10V
0.4 g
Tube
750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
TO-252 Embossed Carrier Reel Pack (RP) Specifications
* Cover tape
0.315
(8.0)
0.512 (13.0) Arbor
Hole Dia.
Cathode
XXXXXX
0.059
Dia
(1.5)
DC
DC
XX
XXXXXX
*
DC
0.524
(13.3)
XX
0.63
(16.0)
XXXXXX
Gate
XX
0.157
(4.0)
XXXXXX
Meets all EIA-481-2 Standards
Anode
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
Part Marking System
S 60 10 L S2 56
DEVICE TYPE
S : SCR
LEAD FORM DIMENSIONS
xx : Lead Form Option
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
CURRENT
10: 10A
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (VPAK)
D : TO-252 (DPAK)
TO-251AA - (V Package)
TO-252AA - (D Package)
Sxx10DS3
TO-220 AB - (L and R Package)
Sxx10DS3
Sxx10R
YM
®
YMLDD
®
YMLDD
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement