Cool Metal Roofing & Energy Star

Cool Metal Roofing & Energy Star
Cool Metal Roofing and
Energy Star
Why Is Cool Metal Roofing
Important?
The U.S. Energy Forecast
The US primary energy
consumption is expected
to grow 1.1% annually
Source: Energy Information
Administration (EIA)
By The Year 2030
Our nation’s electricity demands will
be 45% greater than today
Source: Nuclear Energy Institute
•
•
•
•
•
Energy
Codes
Reduce Energy
Consumption
Reduce Utility
Expenses
Reduce
Environmental
Emissions
Improve Thermal
Comfort
Extend Natural
Resources
Since 1989 energy codes
have increased stringency
by 23%
Conservation and Efficiency
“The cheapest, most reliable source of new energy is saved energy.”
Peter Turnbull, PG&E
New Residential Rebate Program
• Reflective Roof component of FPL’s Residential Building
Envelope Program
• Presently: rebate of $0.10/ft2
– Min. TSR of 0.65 for metal roofing
– Min. TSR of 0.73 for tile roofing
• Future: Flat incentive as of November 1, 2006
– $325 to customer purchasing qualified roof, and
– $200 to contractor selling qualified roof
• Spring 2007
– Adding $0.50/ft2 incentive for residential condominium roofs
• White membranes or white coatings with min TSR of 0.73
Note: Only roofing materials listed on Energy Star website or CRRC directory
are eligible for FPL rebates
LEED-NC Version 2.2
Sustainable Sites Credit 7.2
Heat Island Effect: Roofing (1 Point)
“Use roofing materials having a Solar Reflectance Index (SRI)
equal to or greater than the values in the table below for a
minimum of 75% of the roof surface.”
Roof Type
Slope
SRI
Low Sloped Roof
≤ 2:12
78
Steep Sloped Roof
> 2:12
29
What Qualifies ?
Low Slope (min SRI = 78)
Material
Painted Metal
TSR ≥ 0.66
Steep Slope (min SRI = 29)
Material
Painted Metal
TSR ≥ 0.30
NOTE: Unpainted passivated Galvalume® sheet 1 and acryliccoated Galvalume® sheet 2 do not meet the min SRI values
1
2
based on TSR of 0.78, and emittance of 0.08
based on TSR of 0.68, and emittance of 0.08
Americans spend about
$40 billion
annually to air condition buildings –
one-sixth of all electricity generated in this
country.
What is Energy Star ???
ENERGY STAR is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money
and protect the environment
through energy efficient products
and practices.
Qualifying Requirements – Low Slope
• Low Slope: Surface with a slope of 2:12 or less
– Initial Solar Reflectance of:
• Greater or Equal to 65%
– Maintenance of SR: (three year reading)
• greater than or equal to 50% (-15% SR over 3 years) under normal
conditions.
– Thermal Emittance:
• Greater than or equal to 75%.
– SRI Alternative: to be used if the roof product cannot achieve
thermal emittance value:
• Initial SRI equal to or greater to 75
– Maintenance of SRI: equal to greater to 53
Qualifying Requirements – Steep Slope
• Steep Slope: Surface with a slope of 2:12 or greater
– Initial Solar Reflectance of:
• Greater or Equal to 25%
– Maintenance of SR: (three year reading)
• greater than or equal to 15% (-10% SR over 3 years) under
normal conditions.
– Thermal Emittance:
• Greater than or equal to 75%.
– SRI Alternative: to be used if the roof product cannot achieve
thermal emittance value:
• Initial SRI equal to or greater to 18
– Maintenance of SRI: equal to greater to 4
0.70
0.65
CRRC Approved Color Families
White
0.55
Beige
Off-White
0.45
0.40
Pearlescent
Copper
Bright
White
Tan
Pearlescent
Silver
0.35
TSR
Terra Cotta
0.32
Medium to
Light Blue
Medium to
Light Gray
Bright Red
Medium to
Light Brown
Medium to
Light Green
0.25
Red
Dark Blue Dark Brown
Dark Green
Black
Dark Grey
ATAS Colors that are ENERGY
STAR Approved
Tax Incentives
Energy Policy Act of 2005
Tax Credits and Deductions
• Residential
– Tax credits up to $500 for home improvements
(homeowners)
– Tax credits up to $2000 for new home energy
efficiency (contractors)
• Commercial
– Tax deductions up to $1.80/ft2 for energy efficient
building (building owners)
• For taxable years 2006 and 2007
Tax credits – Existing Homes
• All ENERGY STAR® labeled metal roofs qualify for the
$500 tax credit
• Must be expected to last 5 years OR have a 2 year
warranty
• Installation costs are not included
• Manufacturer’s Certification Statement is required
– For tax purposes, save your receipt and the Manufacturer's
Certification Statement
– The IRS encourages manufacturers to provide these
Certifications on their website to facilitate identification of
qualified products
– Homeowner does not have to submit a copy with tax returns
Tax Credits are More Valuable
Than Tax Deductions
• Tax credits reduce amount of tax owed dollar for dollar
• Tax deduction merely reduces amount of income subject to tax
Example:
$500 tax credit saves a person $500 in taxes
$500 tax deduction saves a person $140 in taxes
$2000 tax credit saves a person $2000 in taxes
$2000 tax deduction saves a person $560 in taxes
Possible Extension To
EP Act of 2005
Bill introduced to Senate in June 2006
by Sen. Olympia Snowe (R) ME and
Sen. Dianne Feinstein (D) CA
“EXTEND the Energy Efficiency
Incentives Act of 2006”
S.3628
Provisions
• Extend tax credits/deductions through 2010
• Incentives based on performance rather than cost
• Sliding scale for home improvements
– Tax credits from $800 (20% savings) to $2000 (50%
savings)
• Increases commercial tax deductions from $1.80
to $2.25 / ft2 for energy efficiency
• Includes “asphalt roof with cooling granules” in
addition to cool metal roofing
Key Definitions
•
•
•
•
•
•
•
TSR / Total Solar Reflectance: amount of radiant energy reflected by a roofing
material. Range is from 0 (total absorption and/or transmission) to 1.0 (total
reflection).
Thermal Emittance: the ability of a material to release heat that it has
absorbed. Range is from 0 to 1.0. The higher the emittance the better
Production Line Color: “Standard color offerings by the manufacturer and are
promoted in general product information and in marketing materials”
Custom Color: A Custom Color is not individually promoted in general product
information and marketing materials.
Color Families: 18 specific color space ranges designed by the CMRC to allow
Licensed Sellers with large color portfolios to register groups of colors at a
reduced cost with the CRRC. ( Hunter L a b / Default SRV )
AITL: Accredited Independent Test Laboratory. Independent lab accredited by
the CRRC to evaluate radiative properties of roofing materials
AMTL: Accredited Manufacturing Test Laboratory. Lab affiliated with a
Licensed Seller or OM accredited by the CRRC to evaluate radiative properties
of roofing materials
Dutch Seam
11”,15”& 19¼” Wide Panels
 1 ½” Panel Depth

WIND-LOKTM Seam Design
 Panels can be Tapered

MRD110 - 11”
1½”
MRD150 - 15”
MRD194 - 19.25”
Dutch Seam
Dutch Seam
Standing Seam Panels
• Finishes
– Kynar 500®/Hylar 5000® - 30 standard colors
– Anodized aluminum - clear or dark bronze
– Mill finish galvalume steel
– Natural copper
• Textures
– Smooth
– Stucco embossed
ScanRoof
• Profile
– Northern European tile
configuration with a 7 7/8” repeat
pattern
• Material
– 24 ga. G90 galvanized steel
• Pitch  3:12
• Finish
– Fluoropolymer
Kynar 500®/Hylar 5000®
Z Purlin
Lip
Standard Length - 21 Modules - 13’ 10”
ScanRoof
• Structural
– Spans up to 4’ 0” o.c.
– Apply to open frame system or solid underlayment
• 2” integral Z purlin
– Allows for air flow between panel and substrate
• Lightweight
– Finished systems weighs only 145 lbs. per square
– Tradition clay tile weighs up to 900 lbs. per square
• Ideal for re-roofing
– Often can be applied over current roofing materials
– Eliminates “tear-off”
ScanRoof
• Applications
– Commercial and residential roofing
– Mansards
– Equipment screens
• Field tested and approved
– UL580 class 90
– UL790 class A & B (fire)
– ICBO (4623)
ScanRoof
ScanRoof
TechoTile
• Profile
– “S” or mission tile configuration
– Scallop is an 8” repeat
• Material
– .032 aluminum
– 26 ga., 24 ga. G90 galvanized
steel
• Pitch  3:12
• Finish
14”
8”
– Fluoropolymer Kynar500®/
Hylar 5000®
• Textures
– Traditional matte
– Glazed
Panel is 42” wide
39 ¾” exposed
42” minimum
(3 tiles)
TechoTile
• Structural
– Spans up to 28” o.c.
– Apply to open frame system or solid underlayment
• Easy to install
– Eave to ridge application
– Custom cut lengths
• Lightweight
– Finished systems weighs only 145 lbs./sq. in steel;
75lbs./sq. in aluminum
• Ideal for re-roofing
– Often can be applied over current roofing materials
– Eliminates “tear-off”
TechoTile
• Applications
– Commercial and residential roofing
– Mansards
– Equipment screens
• Testing
– Tested in accordance with Dade County Protocol
PA 100-95
TechoTile
CastleTop
• Profile
– 16” x 16” diamond shaped
shingle
• Material
– .032 aluminum
– 16 oz. copper
– .028 zinc
• Pitch  3:12
• Finish
– Fluoropolymer Kynar 500®/
Hylar 5000® (embossed)
– Natural (copper & zinc)
15 ¾” square
14” square exposed
Alignment Mark
Pre-punched Screw Holes
Locking Tab
CastleTop
• Four way panel overlap
• Concealed fasteners
• Easy to install
– Eave to ridge application
– 78 pieces per square
• Ideal for re-roofing
– Often can be applied over current roofing materials
– Eliminates “tear-off”
• Design flexibility
– Coordinate colors to create patterns
CastleTop
CastleTop
• Applications
– Commercial and residential roofing
– Mansards
• Testing
– Tested in accordance with Dade County Protocol
PA 100-95
CastleTop
ADVANTA Shingle
• Profile
– Simulated asphalt
shingles
• Material
– 29 ga. G90 Galvanized
steel
• Pitch  3:12
• Finish
– Fluoropolymer
Kynar500®/Hylar 5000®
(embossed)
ADVANTA Shingle
• Four-way interlock panel
• Clip-less shingle
• Secure with ring-shank roofing nails
• Full 3 SQF net coverage
• 95 lbs. per square
• Easy to install
– Eave to ridge installation
• Ideal for re-roofing
– Often can be applied over current roofing materials
– Eliminates “tear-off”
ADVANTA Shingle
• Applications
– Commercial and residential roofing
• Designed to be in accordance with standards
established by new governing code bodies.
• Testing
– Tested in accordance with Dade County Protocol PA
100-95
ADVANTA Shingle
Any Questions
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement