STK500 Info Flyer [PDF/97KB]

STK500 Info Flyer [PDF/97KB]
M ICROCONTROLLERS
STK500 STARTER KIT
AND
DEVELOPMENT
SYSTEM
The Atmel AVR® STK500 is a starter kit and development system for Atmel’s AVR
Flash microcontrollers. The STK500 gives designers a quick start to develop code
on the AVR combined with features for using the starter kit to develop prototypes
and test new designs. The STK500 interfaces with AVR Studio®, Atmel’s Integrated
Development Environment (IDE) for code writing and debugging. The STK500
starter kit includes the following:
• AVR Studio 3.0 Interface
• RS232 Interface to PC for Programming and Control
• Regulated Power Supply for 10V - 15V
DC Power
• 8 Push Buttons and 8 LEDs for
General Use
• All AVR I/O Ports Easily Accessible
through Pin Header Connectors
• RS232 Port for General Use
• Sockets for 8-, 20-, 28- and 40-pin AVR
Devices
• Expansion Connectors for Plug-in
Modules and Prototype Area
• Serial In-System Programming (ISP) of
AVR Devices
• On-board 2-megabit DataFlash® for
Nonvolatile Data Storage
• In-System Programmer for Programming AVR Devices in External Target
System
• Software Upgradable from AVR Studio
to Support Future AVR Devices
• Parallel and Serial High-voltage
Programming of AVR Devices
• Flexible Clocking, Voltage and Reset
System
R
STK500
R
T HE STK500 STARTER KIT AND DEVELOPMENT SYSTEM
The STK500 is a complete starter kit, programming tool and development system for
Atmel’s AVR microcontrollers. The STK500 gives AVR users freedom to develop and
test complete AVR designs and prototypes. The STK500 supports the following Atmel
AVR devices:
Corporate Headquarters
2325 Orchard Parkway
San Jose, CA 95131
Tel: (408) 441-0311
Fax: (408) 487-2600
Europe
Atmel SarL
Route des Arsenaux 41
Casa Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Atmel Asia, Ltd
Room 1219
Chinachem Golden Plaza
77 Mody Road
Tsimshatsui East, Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
•
•
•
•
•
•
•
ATtiny11
ATtiny12
ATtiny15
ATtiny28
AT90S1200
AT90S2313
AT90S2323
•
•
•
•
•
•
AT90S2343
AT90S4433
AT90S8515
AT90S8535
ATmega161
ATmega163
The STK500 supports In-System Programming (ISP) of all AVR microcontrollers in
the sockets as well as programming of external target systems. The AVR I/O ports are
accessible on pin headers that can be used for connecting LEDs, push buttons or
external signals. The extra RS232 port can be connected to any of the I/O pins.
The STK500 programming interface is integrated in AVR Studio. The Flash, EEPROM
and all fuse options can be programmed individually or with the automatic
programming option. The DOS programming software is included for efficient batch
programming in a production environment. The STK500 clock frequency and supply
voltage is controlled from AVR Studio. The active simulator or emulator code in AVR
Studio can be easily programmed into the STK500 with a click of the mouse.
Japan
Atmel Japan K.K.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
e-mail
[email protected]
Web Site
http://www.atmel.com
©Atmel Corporation 2000
Atmel Corporation makes no warranty
for the use of its products, other than
those expressly contained in the
Company’s standard warranty which is
detailed in Atmel’s Terms and
Conditions located on the Company’s
web site. The Company assumes no
responsibility for any errors which may
appear in this document, reserves the
right to change devices or
specifications detailed herein at any
time without notice, and does not
make any commitment to update the
information contained herein. No
licenses to patents or other intellectual
property of Atmel are granted by the
Company in connection with the sale
of Atmel products, expressly or by
implication. Atmel’s products are not
authorized for use as critical
components in life support devices
or systems.
Marks bearing ® and/or ™ are
registered trademarks and trademarks
of Atmel Corporation.
Ordering Information for the STK500
Terms and product names in this
document may be trademarks of
others.
The STK500 starter kit and development system is available from Atmel-franchised
distributors; the ordering code is ATSTK500. The latest version of AVR Studio is
available free from the Atmel web site (http://www.atmel.com).
1939A–10/00/15M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement