RD74LVC1G04 Datasheet

RD74LVC1G04 Datasheet
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
RD74LVC1G04
Inverter
REJ03D0509-0100
Rev.1.00
Oct. 06, 2005
Description
The RD74LVC1G04 has an inverter in a 5-pin package. Low voltage and high-speed operation is suitable for the
battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
•
•
•
•
•
•
The basic gate function is lined up as Renesas uni logic series.
Supply voltage range : 1.65 to 5.5 V
Operating temperature range: –40 to +85°C
All inputs: VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs: VO (Max.) = 5.5 V (@VCC = 0 V)
Output current:
±4 mA (@VCC = 1.65 V)
±8 mA (@VCC = 2.3 V)
±24 mA (@VCC = 3.0 V)
±32 mA (@VCC = 4.5 V)
• Ordering Information
Package Code
Part Name
RD74LVC1G04WPE
Package Type
5pin
WCSP-5pin
(Previous Code)
SXBG0005LB-A
Package
Abbreviation
WP
(TBS-5CV)
Article Indication
Marking
Year code
Month code
E5YM
Rev.1.00 Oct. 06, 2005 page 1 of 7
Taping Abbreviation
(Quantity)
E (3,000 pcs/reel)
RD74LVC1G04
Pin Arrangement
0.7 mm
3
A
2
DNU*
1
DNU: Do not use.
4
Y
1.1 mm
Height 0.4 mm
0.4 mm pitch
0.17 mm 5–Ball (WP) GND
5
(Bottom view)
Pin#1 INDEX
VCC
(Top view)
Logic Diagram
A
Y
Function Table
Input A
Output Y
H
L
L
H
H: High level
L: Low level
Rev.1.00 Oct. 06, 2005 page 2 of 7
RD74LVC1G04
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
–0.5 to 6.5
V
Input voltage range *1
VI
–0.5 to 6.5
V
VO
–0.5 to VCC +0.5
V
Output voltage range
*1, 2
–0.5 to 6.5
Test Conditions
Output : H or L
VCC : OFF
Input clamp current
IIK
–50
Output clamp current
IOK
–50
mA
VO < 0
Continuous output current
IO
±50
mA
VO = 0 to VCC
ICC or IGND
±100
mA
θja
200
°C/W
Tstg
–65 to 150
°C
Continuous current through
VCC or GND
Package Thermal impedance
Storage temperature
Notes:
mA
VI < 0
WP
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings
ngs may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
VCC
1.65
5.5
V
Input voltage range
VI
0
5.5
V
Output voltage range
VO
0
VCC
V
Output current
IOL
—
4
mA
Supply voltage range
IOH
Input transition rise or fall rate
Operating free-air temperature
∆t / ∆v
∆
Ta
VCC = 1.65 V
—
8
VCC = 2.3 V
—
16
VCC = 3.0 V
—
24
—
32
VCC = 4.5 V
—
–4
VCC = 1.65 V
—
–8
VCC = 2.3 V
—
–16
VCC = 3.0 V
—
–24
—
–32
0
20
0
10
VCC = 3.0 to 3.6 V
0
5
VCC = 4.5 to 5.5 V
–40
85
Note: Unused or floating inputs must be held high or low.
Rev.1.00 Oct. 06, 2005 page 3 of 7
Conditions
VCC = 4.5 V
ns / V
°C
VCC = 1.65 to 1.95 V,
2.3 to 2.7 V
RD74LVC1G04
Electrical Characteristics
Ta = –40 to 85°C
Item
Input voltage
Symbol
VCC (V)
Min
VIH
1.65 to 1.95
VCC×0.65
2.3 to 2.7
1.7
3.0 to 3.6
2.0
—
—
VIL
Output voltage
VOH
VOL
Typ
Max
Unit
—
—
V
—
—
Test condition
4.5 to 5.5
VCC×0.7
—
—
1.65 to 1.95
—
—
VCC×0.35
2.3 to 2.7
—
—
0.7
3.0 to 3.6
—
—
0.8
4.5 to 5.5
—
—
VCC×0.3
Min to Max
VCC–0.1
—
—
1.65
1.2
—
—
IOH = –4 mA
2.3
1.9
—
—
IOH = –8 mA
3.0
2.4
—
—
IOH = –16 mA
2.3
—
—
IOH = –24 mA
4.5
3.8
—
—
IOH = –32 mA
Min to Max
—
—
0.1
IOL = 100 µA
1.65
—
—
0.45
IOL = 4 mA
V
IOH = –100 µA
2.3
—
—
0.3
IOL = 8 mA
3.0
—
—
0.4
IOL = 16 mA
—
—
0.55
IOL = 24 mA
4.5
—
—
0.55
Input current
IIN
0 to 5.5
—
—
±5
µA
IOL = 32 mA
VIN = 5.5 V or GND
Quiescent
supply current
ICC
5.5
—
—
10
µA
VIN = VCC or GND,
IO = 0
∆ICC
3 to 5.5
—
—
500
Output leakage
current
IOFF
0
—
—
±10
µA
VIN or VO = 0 to 5.5 V
Input capacitance
CIN
3.3
—
3.5
—
pF
VIN = VCC or GND
One input at VCC–0.6 V,
Other input at VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Oct. 06, 2005 page 4 of 7
RD74LVC1G04
Switching Characteristics
VCC = 1.8 ± 0.15 V
FROM
Ta = –40 to 85°C
Item
Symbol
Min
Max
Unit
tPLH
tPHL
2.0
6.4
ns
3.0
7.5
Propagation delay time
Test Conditions
CL = 15 pF, RL = 1 MΩ
(Input)
TO
(Output)
Y
A
CL = 30 pF, RL = 1.0 kΩ
VCC = 2.5 ± 0.2 V
FROM
Ta = –40 to 85°C
Item
Symbol
Min
Max
Unit
tPLH
tPHL
1.0
4.2
ns
1.4
5.2
Propagation delay time
Test Conditions
CL = 15 pF, RL = 1 MΩ
(Input)
TO
(Output)
Y
A
CL = 30 pF, RL = 500 Ω
VCC = 3.3 ± 0.3 V
FROM
TO
(Input)
(Output)
Ta = –40 to 85°C
Item
Symbol
Min
Max
Unit
tPLH
tPHL
0.7
3.3
ns
1.0
4.2
Propagation delay time
Test Conditions
CL = 15 pF, RL = 1 MΩ
Y
A
CL = 50 pF, RL = 500 Ω
VCC = 5.0 ± 0.5 V
FROM
TO
(Input)
(Output)
Ta = –40 to 85°C
Item
Symbol
Min
Max
Unit
tPLH
tPHL
0.7
3.1
ns
1.0
3.7
Propagation delay time
Test Conditions
CL = 15 pF, RL = 1 MΩ
A
Y
CL = 50 pF, RL = 500 Ω
Operating Characteristics
Ta = 25°C
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
CPD
1.8
—
16
—
pF
2.5
—
18
—
3.3
—
18
—
5.0
—
20
—
Power dissipation capacitance
Test Circuit
Measurement point
From Output
CL *
RL
Note: CL includes probe and jig capacitance.
Rev.1.00 Oct. 06, 2005 page 5 of 7
Test Conditions
f = 10 MHz
RD74LVC1G04
• Waveforms
tr
tf
90%
Input
VCC
90%
Vref
Vref
10%
10%
GND
VOH
Vref
Output
Vref
VOL
t PHL
t PLH
INPUTS
VCC (V)
Vref
CL
RL
≤ 2 ns
VCC / 2
15 pF
1 MΩ
≤ 2 ns
VCC / 2
15 pF
1 MΩ
3 V ≤ 2.5 ns
1.5 V
15 pF
1 MΩ
VCC ≤ 2.5 ns
VCC / 2
15 pF
1 MΩ
Vref
CL
RL
VI
tr / tf
1.8±0.15
VCC
2.5±0.2
VCC
3.3±0.3
5.0±0.5
INPUTS
VCC (V)
VI
tr / tf
1.8±0.15
VCC
≤ 2 ns
VCC / 2
30 pF
1.0 kΩ
2.5±0.2
VCC
≤ 2 ns
VCC / 2
30 pF
500 Ω
3.3±0.3
3 V ≤ 2.5 ns
1.5 V
50 pF
500 Ω
5.0±0.5
VCC ≤ 2.5 ns
VCC / 2
50 pF
500 Ω
Notes: 1. Input waveform: PRR ≤ 10 MHz, Zo = 50 Ω.
2. The output are measured one at a time with one transition per measurement.
Rev.1.00 Oct. 06, 2005 page 6 of 7
RD74LVC1G04
Package Dimensions
JEITA Package Code
S-XFBGA5-0.7x1.1-0.40
RENESAS Code
SXBG0005LB-A
Previous Code
TBS-5CV
MASS[Typ.]
0.001g
D
e
ZD
ZE
C
E
B
e
B
A
1
Pin#1 index area
2
A
5×φb
y1 C
φx M C A B
φx M C
C
Reference
Symbol
Dimension in Millimeters
Min
Nom
A
A2
A1
Seating plane
y C
A1
0.110
0.140
(0.235) *
A2
0.19
0.15
b
*Reference value.
0.70
D
E
1.10
e
0.40
0.05
x
0.05
y
y
Rev.1.00 Oct. 06, 2005 page 7 of 7
Max
0.40
A
0.20
1
ZD
0.15
ZE
0.15
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
Technology Corp. or a third party.
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas T
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
improvements or other reasons. It is
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvement
distributor for the latest product
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distrib
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances
in which human life
ci
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
aerospace, nuclear, or undersea repeater
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
materi
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and
lic
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network"
http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement