Yamaha YHT-24 24 home theater, HTR-5440 5440 AV receiver, DV-S5350 5350 DVD player, NS-AP280 AP280 speakers, SW-201 201 subwoofer Quick-Connect Guide

Yamaha YHT-24 24 home theater, HTR-5440 5440 AV receiver, DV-S5350 5350 DVD player, NS-AP280 AP280 speakers, SW-201 201 subwoofer Quick-Connect Guide

Below you will find brief information for home theater YHT-24 24, AV receiver HTR-5440 5440, DVD player DV-S5350 5350. The YHT-24 is a home theater system that includes an AV receiver, DVD player, speakers, and a subwoofer. It is designed to turn your home into a theater by enhancing the sound of a video source, and it can also be used to play audio from other sources, such as a CD player or a cassette deck. The HTR-5440 receiver has two switched AC outlets that can be used to power connected components, but should not be used for components with clocks. The DV-S5350 DVD player uses an optical connection to enjoy 5.1-channel surround sound on DVDs recorded in Dolby Digital or DTS Digital Surround format.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Yamaha Home Theater YHT-24 24 Quick-Connect Guide | Manualzz

@YAMAHIt

WHERE HOME THEATER LlVES N

just add your TV

YHT-24

QUICK-CONNECT GUIDE

OYAMAHAe _

YHT-24

QUICK-CONNECT GUIDE

INTRODUCTION

Yamaha developed the YHT-24 A/V Home Theater package to turn your home into a theater.

In addition to enhancing the sound of a video source, like your TV or VCR, the YHT-24 also superbly reproduces audio sources, such as a CD player or a cassette deck.

This Quick-Connect Guide will help you get started.

Study the speaker system plan (below), and then use the interconnect diagrams (on the following pages) to connect the receiver and speakers to your system.

For the video portion, you will need a television or monitor. Please refer to the Yamaha HTR-5440 Owner's

Manual, as well as the owner's manuals that came with your other components, for complete instructions and cautions. Be sure to turn off all power while making the connections.

Please keep this guide handy for future reference.

NOTE: Label the end of each speaker wire (i.e., left rear, right front, etc.) before connecting them to the AN receiver. For wire runs over ,~o feet, use larger 18or 16-gauge speaker wire.

TOOLS AND PARTS

The YHT-24 Home Theater package consists of

(1) HTR-5440 A/V receiver with a universal remote control, (1) DV-S5350 DVD player, (1) NS-AP280 package containing (5) 2-way NS-AP280 speakers,

100' of speaker wire, (1) SW-201 powered subwoofer, and related owner's manuals. You will also need:

• Wire strippers (optional)

• Toggle bolts, molly anchor screws, sheet metal screws, and/ or speaker brackets (for securing the N5-AP280 speakers to walls)

NOTE: If you are unsure of how to securely and safely fasten speakers to a wall, please contact a reliable source about the best type of hardware for your particular wall's construction.

Secure installation is the purchaser's responsibility.

SPEAKER SYSTEM PUN

NS-AP280

(left side. same height as TV)

D

L

S

L

R

C

=

Left Channel

=

Right Channel

=

Center Channel

=

Surround Channel o

NS-AP280

(on stand or wall. at least ear level or preferably higher)

S

DC r-

SW-201 Subwooler (on floor) L6J

NS-AP280

(on top or below TV)

~D

R

NS-AP280

(,lgOt sid., "m.

hOlght " TV(

B'-8' apart

U

+.

Listening Area

~

8'-10' apart

-----~

S

D

NS-AP280

(on stand or wall. at least ear level or preferably higher)

OYAMAHI{-----

YHI-24

QUICK-CONNECT GUIDE

CONNECTING AUDIO COMPONENTS

Yamaha HIR-5440 Receiver (Rear Panel)

OIGnA" ~

""'"

B VI~OSIG""'l i

Ci

0R~ iOR:~O

B

.....

AU~ n n

1 . - - - - - _ - - - , lo,oP£OANCE SHECTOA

I <:€'W·-"'lrm..

ft1 ,

CUllER

®,~<D

-.cOOTlEtS

~~o rorA"

[[])

[[])

1

CD Player (Changer)

LOut

10

= 1 ROut 1 •

--~ l.-<l

:-=-

I~

~~~l

CD MDiCO·R

-

- -

NOTE: For your convenience, the Yamaha HTR-5440 receiver is equipped with two switched ac outlets (100 W max.). If desired, use them to power on connected components (e.g.,CD player) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g.,VCR) .

L

R

Cassene Deck,

CD or MD Recorder

LOut* lo~ 001

101 I§lOI

Use Playback Or Line OUt

•• use

Lileln

I

J ROut* Lln** R In**

Use RCA Audio Cables Fo r Audio Interconnections

RCA Cable Color Codes

Yellow = Video

White

=

Len Audio

Red = Right Audio

OYAMAHI{

CONNECTING THE YHT·24 SPEAKERS

NS-AP280

(Front Right Ch.)

SW-201

(Subwoofer)

YHT-24

QUICK-CONNECT GUIDE

Subwoofer Wiring

NS-AP280

(Front left Ch.)

o o

@

0

0 o o

@

0

0

..

To AC Oullet

• • •

Stripe

Wire

Stripe

Wire

RCA

Audio Cable

Yamaha HTR-5440

AN

Receiver

(Rear Panel)

Set IMPEDANCE Selector to right position.

Stripe

Wire

0 0 0 o o

NS-AP280

(Surround Right)

o

Stripe

Wire

NS-AP280

(Center Channel)

o

Strip 114" off ends of speaker wires.

@ Push and hold down levers.

@)

Insert speaker wires and release levers.

Speaker

Wiring

Stripe

Wire

0 0 0 o o

NS-AP280

(Surround left)

OYAMAHA

e YHI-24

QUICK-CONNECT GUIDE

CONNECTING VIDEO CABLES FOR VIDEO COMPONENTS

Yamaha HTR-5440 Receiver (Rear Panel)

'SnUNBAL

B

MAIN

A~U

U U

1 . - - - - - _ - - - ,

IMPEo.-.NCE SHEClOA

I flOffMf ...

..,".ufl< I

CENTER

® .~, <D

N:O\JTlETS

~~~Ff.

fOTAl

[[]]

[[]]

NOTE: When using a hi-Ii stereo VCR, set the Tuner/Line switch

(on the VCR) to Line position to record from another source connected to the Yamaha HTR-5440 receiver .

Monitor/TV

i VIOEOSlGNA!.

I

~V'S @~R~OU~l(~-~."'''·-~~-ot--

Optional 75-ohm

I--V-id-eo-I-i n

~~~~~=,J ~~~X::I

Cable

I I

Satellite Receiver

(or Video Game)

Video Out

Hi-Fi Stereo VCR

Ilbl=dl-l:'

ms:crBjll

ANT Out

Video In

I

J Video Out (RF Out)

Use RCA Video Cables And Jacks For Video Interconnections

RCA Cable Color Codes

Yellow

White

=

Video

=

Lett Audio

Red = Right Audio o

OYAMAHAe YHT-24

QUICK-CONNECT GUIDE

CONNECTING THE YAMAHA

OV-85350 OVD

PLAYER

Yamaha HIR-5440 Receiver (Rear Panel)

~N

B

A~~~ n n

1 . - - - - - - _ - - - , lYF'fDo\NCe5eLECTQR

I

(lnt"ffi!lr .....

:ttf'''''

I>l;OUTl£lS

SWITCHEO

°GOWMAX.

'0''''

Analog Out·

L I~

I:

R II(~("'-+----_

-;;c;-

'NGa

NOTE: Use the optical connection to enjoy 5.1-channel surround sound

EiI

found on DVDs recorded in the Dolby Digital or DTS Digital Surround format.

IIlla

Connecting Optical Cable

..

NOTES:

R~"'. ~," oU' ,,"",", and insert cable.

• On both ends of the optical cable, align and firmly insert each plug into its mating terminal.

• During connection, do not bend the optical cable.

• Keep dust caps and reattach them if terminals are not used.

Use the Included RCA Cables lor Analog and Video

Connections Between the DVD Player and Receiver.

RCA Cable Color Codes

Yellow

White

Red

=

=

Video

Left Audio

=

Right Audio

Optical Cable (Included)

1"'>--------------:::,...,....,..,..,....,...,..,..-------11----11-------1.-+---------------(/

@YAMAHA

1 I

Yamaha DV-S 5350 DVD Player (Rear Panel)

'AI/ala~ Alldio r,'cordi"~f/,(}II/

Olll

DVD

COII/lcc/io", arc rcql/ired!or playback o!CD-R, a"d

/0

VCR.

Oolby Di~ital is a t mdclI/ark "r Dolby Labamloric, Lice",i,,~ Corl'0mliol/.

OTS i.' a Imdt'lllclrk or DTS Tcclll/olo~y LLC.

o

I

I

eyAMAHJr-----

YHI-24

QUICK-CONNECT GUIDE

CONNECTING AUDIO CABLES FOR VIDEO COMPONENTS

Yamaha HIR-5440 Receiver (Rear Panel)

B

>.WN

AU'~

U U

Ir----------:=---,

ItIIPE()I.,NCE SELECTOR

'W!!Fff!'fe2"f,f!j'

CENTER

®.~©

J,(;OJTlHS

SWITC...eO

l00WMAX

TOTAL

[]J

[]J

Satellite Receiver

(or Video Game)

10 c:=:::=J c:J c::z:::::K::lI c = J

Audio LOut

I

Audio ROut

NOTE: When using a hi-Ii stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5440 receiver.

:

~

~~¥!!

VCR' D-TY'CBL

AUDIO SIGNAL

HI-FI Stereo VCR

II I

AUdio Audio Audio

LOut ROut Lin

L Use RCA Audio Cables And Jacks For Audio Interconnections.

R

Audio

Rln

RCA Cable Color Codes

Yellow = Video

White

Red

=

Left Audio

=

Right Audio o

OYAMAHAe YHT-24

QUICK-CONNECT GUIDE

CABLE HOOK-UP (BASIC AND PREMIUM CHANNELS)

Yamaha H1R·5440 Receiver (Rear Panel)

!'iOUNBAl.

MAIN

A~~ ann

1 . . - - _ - - - ,

IMPEDANCE SELECTOR

I >rr"ffOAEPQWf~Qty I

ACOVTLETS

SWITCHED

100WMAX

TOTAL

[[]J

[0

Dl

OIl

I L---==:=::::::::"'.---JL-_=..J

• source connected to the Yamaha HTR-5440 receiver.

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another

I

HHI Stereo VCR

Audio Audio

LOut ROut

I

I

Video In

I

II 00 liB Video Out

AUdl~

Lin

II

Audio RIn

OR

Basic Cable

(From Wall Jack)

ANTI n

RCA Audio Cables

RCA Video Cables

2S~<eJ

a<e

~ l~~

P ~

VCRl RCA Audio Cables

L

R

Premium Cable

(From Wall Jack)

- Descrambler

Converter

Box

(Channel 3 or 4

Output)

ANT In

I

Hi-FI Stereo VCR

(Tuner set to Channel 3 or 4)

Audio Audio

LOut ROut

I

Video In

I I

II 00 liB Video Out

AUdi~

Lin

II

Audio RIn

RCA Audio Cables

RCA Audio Cables

RCA Video Cables

S~8J a,0

L

R

IIllI'j}j l~~

r"

OUT

VCA \

RCA Cable Color Codes

Yellow = Video

White

Red

=

Left Audio

=

Right Audio

.YAMAH~ _ YHT-24

QUICK-CONNECT GUIDE

INITIAL ADJUSTMENT OF THE

SW·201

SUBWOOFER

To achieve the optimum volume balance between the

SW-201 Subwoofer and the NS-AP280 Main Speakers, perform the following procedure:

1. Insert the SW-201's power plug into a nearby ac outlet.

2. Set the SW-201's VOLUME control to 0 (minimum setting), the AUTO STANDBY switch to HIGH, and the HIGH CUT switch to LOW.

3. Press the SW-201's POWER switch to ON and power on all other components.

SW-201 Subwoofer

(Rear Panel)

4. Play an audio source and adjust the HTR-5440's

VOLUME control to a desired listening level.

5. On the SW-201, increase the volume gradually to adjust the balance the volume between the SW-201

Subwoofer and the NS-AP280 Main Speakers.

NOTE: Once the volume is balanced between the subwoofer and the main speakers, you can adjust the volume of your whole sound system by using the

HTR-5440's VOLUME control.

.

.

..

.

.

.

~

• • • • • o

"+To AC Oullet

OYAMAHAe _

YHT-24

QUICK-CONNECT GUIDE

PROGRAMMING THE UNIVERSAL REMOTE CONTROL

Indicator LED

------f-~-~,...-.::j-.

-'<<i'

~

Use Keypad

To Enter

Setup Codes

<f>

~

~:::::;nt

Buttons

~Tr,:TIi,;i:";ji~?(BJt,;ill[;BI--;:::::'--+---

Turns On

Component's

Power

SETTING

Up

COMPONENTS

Perform the procedure for each component you own.

At the end of each step 5, the remote control's processor will automatically assign the selected component's control functions to its own buttons, ready for your use.

SETTING

Up

YOUR

TV

1.

Turn on the television set and look up a setup code for your brand of television (codes are located at the back of the HTR-5440 Owner's Manua/).

2.

0.\ the remote control, press TV

Use To Enter -----a.+>

Setup Mode

II

~f---Use To Enter

Setup Mode

~

~

3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

@YAMAHA

The YHT-24 Home Theater package includes a universal pre-programmed remote control with factory codes to control your HTR-5440 receiver and most Yamaha audio components. To program other brands of components (i.e., TV, VCR, etc.) or if your Yamaha unit does not respond, you will need to program the remote control with the manufacturer's codes (listed on the back pages of the HTR-5440 Owner's Manual).

NOTE: This remote control is designed to control most major brands ofaudio and video components. For other units, use the original remote control supplied with the product.

POWER

ON

1. Load the supplied batteries into the remote control.

2. Aim the remote control at the HTR-5440, press

AMP /TUNER, and then press POWER.

3. The receiver should turn on.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

TUNER MO/CO·R

TEST

V·AUX 6£>i INPUT

~

+100 +10

88

AlBIC/OlE EFFECT

5. To verify the code works, aim the remote control at the television set, press TV, and then press POWER.

The television set should turn off.

If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5.

eyAMAHIf-----

YHI-24

QUICK-CONNECT GUIDE

PROGRAMMING THE UNIVERSAL REMOTE CONTROL (CONTINUED)

SETTING

Up

YOUR CABLE

Box

(OR DSS)

1.

Turn on the cable box (or DSS) and look up a setup code for your brand of cable box (or DSS) (codes are located at the back of the HTR-5440 Owner's Manual.

2. On the remote control, press CBL/SA T.

SETTING

Up

OTHER COMPONENTS

1.

Turn on the component (e.g., CD player, tape deck, or MD player) and look up a setup code for your brand of component.

2. On the remote control, press the desired component button (e.g., CD or TAPE/MD).

3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

4..

Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at the component, press the appropiate component button, and then press POWER. The unit should turn off.

If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5.

3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at the cable box (or DSS), press CBL/SAT, and then press POWER. The unit should turn off.

If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5.

SETTING

1.

Up

YOUR VCR

Turn on the VCR and look up a setup code for your brand of VCR.

2. On the remote control, press VCR.

3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at the VCR, press VCR, and then press POWER. The

VCR should turn off.

If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5.

OYAMAHAe YHT-24

QUICK-CONNECT GUIDE

OPERATING THE UNIVERSAL REMOTE CONTROL

OVERVIEW

The universal remote control will control up to seven different types of components (including the HTR-5440 receiver), each of which becomes active when you press a selection (e.g., TV, VCR, etc.). We can only briefly describe some functions here, and we encourage you use the HTR-5440 Owner's Manual to gain additional experience with this powerful unit.

PLAYING

A

VIDEOCASSETTE

1.

Aim the remote control at the HTR-5440, press

AMP /TUNER to select the component, and then press POWER to turn the receiver on. Press VCR (i.e.,

6 on the keypad) as the input for the receiver.

2. Aim the remote control at the TV, press the TV to select the component, and then press POWER to turn the television on. Press TV INPUT (or A/B) to select the correct input.

3. Aim the remote control at the VCR, press VCR to select the component, and then press POWER to turn the VCR on. Put a tape in the VCR, press PLAY.

NOTE: At this point, the VCR controls are assigned to the remote control, since VCR was the last selected component.

If you now press the VOLUME up (down) buttons, the TVNCR volume will be raised (or lowered). To adjust the receiver's volume, you must press AMP/TUNER to activate its functions.

PLAYING

A

DVD

1.

Aim the remote control at the HTR-5440, press AMP /

TUNER to select the component, and then press

POWER to turn the receiver on. Press DVD/lD (i.e., 4 on the keypad) as the input for the receiver.

2. Press DVD /lD and then press POWER to turn the

DVD (or lD) player on.

NOTE: If the DVD player is plugged into the switched ac outlet (on the back of the receiver) and its power switch was already engaged, the unit will come on each time the receiver is powered on.

3. Load a DVD (or LD) into the DVD (or LD) player.

4. Aim the remote control at the DVD (or LD) player, and press> (forward button) to start play.

NOTE: The DVD player's controls are now assigned to the remote control buttons, since DVD was the last selected component.

RESETTING THE REMOTE CONTROL To fACTORY CODES

You can reset the remote control to factory codes for all components or a desired component, as follows:

RESETTING CODES FOR ALL COMPONENTS

1.

Press any component selector button other than

AMP/TUNER.

2. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

3. Using the keypad, enter the code "9990".

4. The indicator LED will flash twice to confirm all codes have been reset to factory values.

If the lED does not flash twice, repeat steps 1 through 3.

RESETTING CODES FOR

A

DESIRED COMPONENT

1.

Press a component selector button that matches the component you wish to reset to factory codes.

2. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice.

3. Using the keypad, enter the code "0000".

4. The indicator LED will flash twice to confirm all codes have been reset to factory values.

If the lED does not flash twice, repeat steps 1 through 3.

5. For your convenience, the following reference chart lists the factory codes:

Component

Selector Button

Component Code

TV

CBL/SAT

VCR

DVD/LD

CD

TAPE/MD

TV

Cable TV

VCR

DVD player

CD player

MD recorder

0101

0006

0002

0008 Yamaha

0005 Yamaha

0024 Yamaha

_YAMAHA-

©2001 YAMAHA ELECTRONICS CORPORAnON, USA

6660 Orangethorpe Avenue, Buena Park, CA 90620

PH: (714) 522-9105; FAX: (888) 435-7922 http://www.yamaha.com

advertisement

Key Features

  • 5.1-channel surround sound
  • Dolby Digital and DTS Digital Surround formats
  • Two switched AC outlets
  • Universal remote control
  • Easy-to-use Quick-Connect Guide

Frequently Answers and Questions

What is the YHT-24 home theater system?
The YHT-24 is a home theater system that includes an AV receiver, DVD player, speakers, and a subwoofer.
What are the included components in the YHT-24?
The YHT-24 includes an HTR-5440 AV receiver, DV-S5350 DVD player, NS-AP280 speakers, SW-201 powered subwoofer and related owner's manuals.
How do I connect the YHT-24 speakers?
The Quick-Connect Guide provides detailed instructions and diagrams for connecting the speakers to the receiver.

Related manuals

Download PDF

advertisement