Data Sheet | Motorola Cryptr 2 Broadband IP Encryption Unit Datasheet

Product SPEC SHEET
Cryptr 2 (type 1 secret)
Broadband IP Encryption Unit (Type 1 SECRET)
Cryptr 2
Motorola’s CRYPTR 2 Broadband IP
Encryption unit is well-suited for use in
mobile networks to provide reliable, endto-end encrypted communications for Type
1 SECRET and below applications.
When national security missions depend on
commercial wireless communications, customers
need end-to-end encryption solutions they can rely
on. The solutions need to be cost-effective, rugged,
flexible, and interoperable.
When paired with Motorola’s industry leading
broadband networks, Motorola CRYPTR 2 is part of
the secure communications solution customers need
for increasingly demanding mission requirements.
CRYPTR 2 is a ground-up Suite B solution, and the
device is non-CCI. This helps reduce the cost of
accounting and logistics of transport, handling,
and network setup. Making use of commercial
encryption technology, CRYPTR 2 provides cost
effective network security.
Designed with mobility in mind, CRYPTR 2’s low
size, weight, and power requirements coupled
with its ruggedness allow flexible installation and
power options, and its unique QoS-aware features
help maximize the utility of broadband wireless
networks.
New to CRYPTR 2 is remote network monitoring and
management using standard SNMPv3 tools.
CRYPTR 2’s software upgradeability allows for
flexibility as interoperability standards develop and
mature.
CRYPTR 2 can accept keys from a DS-101 keyfill
device, allowing for a crypto solution that can
be used in existing classified key management
domains.
• Non-CCI
• Full Suite B Solution
Suite B IPSEC (RFC 4869)
AES, Elliptic Curve Cipher Suites
• Small and Rugged
1.75 lbs. (800 g)
1.5 x 5.7 x 4.7 in (39 x 145 x 120 mm)
Sealed to prevent water and dust intrusion
Locking power cable connector
• Remote Management
SNMPv3 Management and Monitoring
• Flexible Keyfill Options
DS-101
• Designed for Wireless Broadband Mobility
20Mb Throughput
QoS Support
Product SPEC SHEET
cryptr 2 (type 1 secret)
Security AND PERFORMANCE SPECIFICATIONS
Type 1 SECRET and below
NSA CCEP Evaluation
Handling Requirements
Non-CCI
Throughput
20 Mbps
ELECTRICAL AND PHYSICAL SPECIFICATIONS
Power
12VDC @ 300 mA
Interfaces
2x 10/100 RJ45 Ethernet, Key
Fill, 2x RS-232 Serial, USB host/
device port
Dimensions
1.5 x 5.7 x 4.7 in
(39 x 145 x 120 mm)
Weight
1.75 lbs. (800 g)
Mounting Options
Rack, Desk, Mobile
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
–30°C to +60°C (–22°F to +140°F)
Storage Temperature
–40°C to +85°C (–40°F to +185°F)
Humidity
Up to 90% RH at Upper Limit
Operating Temperature
Environmental
Specification
MIL-STD-810F
PROTOCOLS AND ENCRYPTION ALGORITHM
INTEROPERABILITY
AES256
Advanced Encryption Standard:
FIPS197
Suite B IPSEC
RFC 4869 – Suite B Cryptographic
Suites for IPSEC
IKE
Internet Key Exchange
IPv4
Internet Protocol version Four
SNMPv3
Simple Network Management
Protocol version 3
ENCRYPTION KEY PROVISIONING, KEY LOADING AND
KEY MANAGEMENT
Configuration through USB port
Support for Electronic Key
Management System (EKMS) and
DS-101 key fill devices through a
DS-101 interface
Motorola Solutions, Inc. 1301 E. Algonquin Road, Schaumburg, Illinois 60196 U.S.A. motorolasolutions.com/cryptr
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Solutions, Inc. All rights reserved.
R3-17-2006B (1109)