VIC-220 Video Interface Control By Draper Technical Data Sheet

VIC-220 Video Interface Control By Draper Technical Data Sheet
Technical Data Sheet
VIC-220 Video Interface Control By Draper
USES:
The VIC-220 replaces the standard single-station control switch for all screens or
shades where a 220 volt trigger circuit is turned on to lower the product, and turned
off to raise the product.
COMPATIBILITY:
The VIC-220 is intended as the sole control, and cannot be used with any other
control, except the optional override switch (VIC-OS).
Please Note: If VIC-220 is built-in, VIC-OS cannot be used.
CONTACTS:
Single-Pole, Double-Throw (Common, Normally Closed, Normally Open).
RATING:
Contacts: 240 Volts, 10 A; 28V DC, 15 A, UL recognized, CSA recognized.
Coil: 220V AC.
Requires 100 MilliAmps input.
DESCRIPTION:
A relay with COM/NC/NO contacts, and a 220V coil, housed in a metal box.
Box measures 76 x 102 x 127 mm and has three pigtails leading from it:
a. A 229 cm black cord with 3-pronged plug for constant 220V AC.
b. A 259 cm white cord with 2-pronged plug for switched 220V AC.
c. Four 152 mm wire leads for the motor: blue, red, white, green
(up, down, neut., grnd).
PART NUMBER:
121041
ILLUSTRATION:
127
mm
102
mm
VIC—220
Use only with projectors having
screen triggers of 220 VAC.
Control Input
220 VAC
76
mm
To 220 V AC switched outlet
High Voltage
220 VAC to screen
To 220 V AC standard outlet
Green
White—Neutral
To Motor's
white wire
Red—To
Motor's DOWN
lead
®
Copyright ©2010 Draper Inc. Form VIC-220_TechDataSheet10 Printed in U.S.A.
Black
Green—Ground
Blue—To
Motor's UP
lead
White
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement