MODEL No: AMERICAN SPECIALTIES, INC. ISSUED: 441 Saw Mill River Road, Yonkers, NY 10701 (914) 476-9000 REVISED: 94684 7-98 11-03 RECESSED MOUNTED DUAL SANITARY NAPKIN & TAMPON DISPENSER SPECIFICATION Recessed Mounted Dual Sanitary Napkin & Tampon Dispenser shall hold 15 napkins and 23 tampons of specified sizes. Cabinet and door shall be fabricated of alloy 18-8 stainless steel, type 304. Cabinet shall be No18 gauge with a 1′′ (25mm) wide perimeter return to lay flat against wall. Full face door shall be No16 gauge and shall be free of miters, welding or open seams with 15/16′′ (24mm) square horizontal return to wall and 3/4 ′′(19mm) rounded vertical edges. Door shall be attached to the edge of unit with a full length 3/16′′ (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with two (2) rimless tumbler locks keyed alike to other ASI washroom equipment. Internal coin-box shall be keyed differently than door locks. All exposed surfaces shall have No 4 satin finish and shall be protected during shipment with a PVC film that shall be easily removable after installation. Dispensing mechanisms shall be fastener mounted internally to provide ability to change mechanisms for coinage denomination. Structural assembly of body and door components shall be of welded construction and have no exposed fasteners or welded seams. Weights for each feed track shall be supplied. Factory installed coin operation denomination shall be _________ (please fill in 25¢ or 50¢ or FREE and add denomination as suffix to model No (i.e. 94684-25). Recessed Mounted Dual Sanitary Napkin & Tampon Dispenser shall be Model No 94684-xx as manufactured by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, New York 10701- 4913 INSTALLATION Unit is recessed mounted using four (4) No10 self-tapping screws (not supplied). For maximum usability and compliance with ADA Accessibility Guidelines, unit should be installed so that coin slot is between 54′′ (1372mm) maximum above finished floor (AFF) and 38′′ (965mm) minimum AFF. Note that coin slot is 6-3/8′′ (162mm) above bottom edge of RWO. ′′′′W x 26′′ ′′′′H x 4′′ ′′′′D (406mm x 660mm x 102 mm) Rough Wall Opening (RWO) required is 16′′ Accessory Specialties AMERICAN DISPENSER Desert Ray Products THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE ,INC. MODEL No: AMERICAN SPECIALTIES, INC. ISSUED: 441 Saw Mill River Road, Yonkers, NY 10701 (914) 476-9000 REVISED: 94684 7-98 11-03 RECESSED MOUNTED DUAL SANITARY NAPKIN & TAMPON DISPENSER OPERATION Deposit of specified coin allows operation of dispenser. Napkin and tampon dispensers operate independently. Selected product drops into vending opening after operator actuation. Indicator displays empty condition and blocks coin slot when product is depleted. Unit vend product supply is replenished on cycle determined by maintenance needs by opening door and manually reloading product into dispenser supply tracks. Track weights provide positive feed. NAPKINS, SINGLES, CARDBOARD-BOXED, SEMIGLOSS FINISH; CAPACITY: 15, BOX SIZE: 4-1/4" x 3" x 1-1/8" (108mm x 76mm x 29mm) Stayfree No. 4 Guards No's. 247, or 147 Kotex No's.704,707,07010, 07040, 07045, 07300, 07320 Pure-Nat No. M-4 Modess No. 4 TAMPONS, CYLINDER, CARDBOARD, SEMIGLOSS, CRIMPED ENDS; CAPACITY: 23, TUBE SIZE: 3/4" dia. x 5-1/4" (19mm x 134mm) Tampax Modess Tampons Accessory Specialties AMERICAN DISPENSER Desert Ray Products THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE ,INC.