KSP-100 SYSTEM UPDATE MANUAL

KSP-100 SYSTEM UPDATE MANUAL
KSP-100 SYSTEM UPDATE MANUAL
SystemUpdate
BMB International Corp.
2013/12/1
KSP-100 SYSTEM UPDATE MANUAL
System Update
Software Name
KSP-100_SystemUpdate_Ver201_201312
KSP-100_PCEditor_Ver2001_201311
Software Version
KSP-100_SystemUpdate:Ver2.01
KSP-100_PCEditor:Ver2.0.0.1
Release Date
1/December/2013
System requirement
PC(Windows XP or later)
Product Number
KSP-100
Copyright Holder
BMB International corp.
Important
Will not be able to start PC Editor when connecting KSP-100 (priorVersion1.02) and
PC Editor (New Version2.0.0.1).
Can start PC Editor when connecting KSP-100(New Version2.01) and PC Editor
(priorVersion1.0.0.0) ,but it will enable you to adjust the echo and EQ adjustment for 3,4
Microphone
Please always use both new versions of the PC Editor when upgrading KSP-100.
Modification
1. Additional function Key control
Can now change the key control to 15 levels, from #7~natural ~♭7.
【How to operate the KSP-100】
From the Top menu press “Exit Button” using the volume control to adjust.
2. Modification of the setting item for Echo parameter
The major change allows adjusting the delay, reverb parameter etc,
3. Additional howling (Anti feedback) cancel function
Additional Diffuse Method which doesn’t much affect the sound quality of the
Microphone .
4. Sub-Woofer EQ-Adjustment
EQ for 4band of sub-woofer output, allowing different sound quality adjustment.
5. Separate EQ adjustment micro-phone input
EQ adjustment is now capable for each microphone group 1, 2 and 3, 4.
6. Input of Automatic ON/Off function for Hanamichi effect Microphone
When turning the Microphone on, Additional auto ON/OFF function use of the
Hanamichi affect microphone.
When the microphone is off, the Hanamichi effect will automatically be turned off.
7. Modification of the scene, echo preset parameter
For the use of our BMB speaker, reference parameter adjustments have been
made.
8. PC Editor (Version 2.0.0.1) operation, layout improvement
・Enlargement of EQ graphs.
・Allows you to directly input the number for each function level.
・Additional ON/OFF function for “Focus by cursor overlaps”
ON mode/ for prior PC Editor equivalent for each function move the cursor to
where you desire and can be easily adjusted.
OFF mode/Move the cursor to the item you prefer to readjust then can easily
adjust each function by a click.
・Can now re-boot PC Editor without connecting to a USB from KSP-100
Set Up I n s t r u c t i o n
1. Unzip the downloaded file
2. Turn off KSP-100
3. Connect PC with USB
4. Power on KSP-100 with ”MUSIC” and ”OUTPUT” and ”SELECT DOWN(∨)” buttons
5. The following screen will be shown when in System Update Mode
6. Screen is displayed below when you start KSP-100_Update.exe of PC
7. Then click [START] to begin update
8. Screen is displayed below when System Update is completed
9. LCD screen of KSP-100 will display the following
10. Turn off KSP-100 Power
11. Turn on "KSP-100" and check the Version. “MIC”+”MUSIC” Buttons Push SYSTEM
MEMU to Information “Version 2.01”
2.01
12. After checking new version Factory Reset check "all# then "enter" to complete
installation
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement