F i b e r O n e... O p t i c a l Te... ™

F i b e r   O n e... O p t i c a l   Te... ™
N E T W O R K S U P E R V I S I O N
F i b e r O n e S h o t ™ O p t i c a l Te s t S e t
Introducing the new innovative, pocket-size
Fiber OneShot Optical Test Set. Bringing you
a simple test set for traditionally complex
single-mode fiber testing. Designed with
an intuitive one button test capability, you
are testing in just a few seconds. Quickly and
accurately verify if a fiber is active, find the
distance to a break or end, dirty end face or
reflective event. This test set goes from zero
to 9,999 feet, with no dead zone. For testing
at the central office, node, hub, drop, optical
network terminal (ONT); for residence or business, the Fiber OneShot is the portable FTTx
tester for you.
Fast testing for essential fiber
troubleshooting
Triple-Check for essential troubleshooting:
1. Light or No light – is my fiber active?
CheckActive alert
2.Distance to event (fault): Dirty end face/
bulkhead and break or reflective event
3.Distance to event (end): End of fiber
Durability for the outside plant
environment
Built to last, the Fiber OneShot incorporates an
energy-absorbing holster over an impact-resistant
case to withstand drops, impacts, and the tough
outside plant environment. Together with a heavyduty tethered end cap to protect the fiber adapter,
the Fiber OneShot is the test set for demanding
field applications, ensuring trouble-free operation.
Testing benefits that increase your
productivity:
Top features include:
• Essential fiber test results displayed numerically, no interpretation needed
• Extra large liquid crystal display (LCD) with programmable backlight for use in any environment
• Measure the length to a break, end, dirty end • Auto shut down to extend
face/bulkhead, or reflective event quickly and battery life
accurately from 0 – 9,999 feet (note* 0 – 6,000 • Battery life gauge meters displayed in metric mode)
• Extended battery life, up to
• New CheckActive™ feature: alerts the user if 5,000 tests
an optical signal is on the fiber
• Field-replaceable (2) AA batteries • Instant-on: no boot/load time Ordering information:
• Single button testing: essential fiber testing in just a few seconds
• Quick change battery compartment, no screwdriver needed
• No dead zone: locate fiber faults at 1-meter
• Removable/cleanable SC adapter Model number
Description
• Self calibrating, factory calibration not required
FIBR-1-KIT
FIBER ONE SHOT-SC-KIT
• Adjustable feet/metric mode FIBR-1-SHOT
FIBER ONE SHOT-ONLY
• Adjustable APC/UPC mode FIBR-1-KIT-VF
FIBER ONE SHOT-SC-KIT + VISIFAULT
FIBR-1-KIT-PM
FIBER ONE SHOT-SC-KIT + SFPOWERMETER
• Adjustable index of refraction (I.O.R.) mode FIBR-1-KIT-VFPM
FIBER ONE SHOT-SC-KIT+ VISIFAULT
+ SFPOWERMETER
Models
Accessories
Model number
Description
FIBR-AC-UAPC
1-METR UPC-APC LAUNCH CRD
FIBR-AC-UUPC
1-METR UPC-UPC LAUNCH CRD
FIBR-AC-CH
CASE, HOLSTR-FIBR ONESHOT
• Adjustable dB limit mode • Output wavelengths 1310 nm ±
25 nm
• Durable to survive drops, vibrations and impacts
Essential single-mode fiber testing made easy
Technical Data
N E T W O R K S U P E R V I S I O N
Display: Fiber test results displayed numerically, no interpretation necessary
CheckActive™ shows when the meter looks for an optical signal on the fiber. CheckActive™ and ACTIVE LINE blink
if there is an optical signal on the fiber. The meter will not do a test if there is an optical signal on the fiber.
When the low battery symbol shows,
replace the batteries soon
Settings for the meter.
Single-mode fiber testing
made easy anywhere in
your network
The digits show the fiber length
in feet or meters.
: Shows when the length
is more than the range
of the meter.
Shows when you look at the setting for
the backlight timer. The setting is in seconds.
: Can show for short fibers
when the meter cannot
measure the length accurately.
Shows an error number for error conditions.
Shows as the meter measures
length.
Shows when the meter completes a length
measurement.
Fiber OneShot Optical Test Set Specifications (Typical)
Operating temperature
with the battery
0ºC to 50ºC
Safety
CSA C22.2 No. 61010.1:04,
EN 61010-1 2nd Edition 2001,
EN60825-1, 2:2006
Non-operating temperature
-20ºC to 60ºC
Altitude
3000 m
Operating relative humidity
(without condensation)
95% (10ºC to 35ºC)
75% (35ºC to 40ºC)
uncontrolled < 10ºC
EMC
EN 61326-1: 2004
Vibration
Random, 5 Hz to 500 Hz,
MIL-PRF-28800F CLASS 2
Sampling spacing
12.5 cm to 1 m
(1.25 ns to 10 ns)
Shock
1 meter drop test
Instrument reporting
information
Distance to the first reflective
incident and/or end of fiber2
UPC or APC open Break
Reflective incident
Poor bulkhead connection
BREAK OR END OF FIBER
BREAK OR END OF FIBER
0 ft/m (Will not measure a splice
loss, connector loss, bend loss,
or fiber attenuation.)
Maximum distance
6000 meters or 9999 feet
LCD type
Backlit black and white (segments)
Distance accuracy
(0 m to 3000 m or
0 ft to 9999 ft)
± 1 m for reflective incidents,
± 0.1% of length6
± 3 m for non-reflective
incidents, ± 0.1% of length7
Index of refraction range
1.45 to 1.5 (factory default is 1.468)
Testing speed
< 6 seconds typical8
Auto turn off
Automatically turns off after 5
minutes if no keys are pressed.
Connector
Removable/cleanable SC adapter,
UPC polish
Factory calibration interval
None
Fiber types tested
9/125 µm singlemode
Output wavelengths
1310 nm ± 25 nm
Reflectance threshold
-40 dB typical
Emitter type
Fabry-Perot laser diode connected to
9/125 μm fiber
APC open detection
-65 dB reflectance typical and
backscatter > 3 dB above the
noise floor
Laser classification
Class 1 CDRH Complies to EN 60825-2
Detector type
InGaAs PIN photodiode used in
incident detection
Pulse widths
20 ns to 500 ns
Safety
CSA C22.2 No. 61010.1.04, EN
61010-1:2001 {2nd Edition},
EN60825-1:2007 Class 1 Laser
Power into fiber under test
> 10 mW-pk
EMC
EN 61326-1, EN61000-4-2,
3 80 MHz to 2.7 GHz @ 3V/m.
Telephony Requirements:
Class B Emissions
Dynamic range
> 11 dB
P
Conforms to relevant European
Union directives
Distance to first reflective
open
Photodiode
1m
40 µm – 80 µm, PIN InGaAs
;
Conforms to relevant Australian
standards
)
Listed by the Canadian
Standards Association CSA C22.2
No. 61010.1.04
Measure the length
on a spool
Test at the optical network
terminal (ONT or hub)
Test buried or aerial drops
N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
call 1-800-283-5853 or go to
www.flukenetworks.com/contact.
©2009 Fluke Corporation. All rights reserved.
Printed in U.S.A. 12/2009 3585749A
©2009 Fluke Corporation. All rights reserved. Printed in U.S.A. 11/2009 3585749A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement