ABB General Performance Cast Iron Motors

ABB General Performance Cast Iron Motors
Low Voltage
General Purpose Cast Iron Motors
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
1
Making you more competitive
ABB’s General purpose motor is designed for use in general industry, meeting the
demands of standard applications for OEM's. Motors are readily available from
central stock locations and distributors around the world. The motors have high
build quality, are available with all the features needed by the OEM market and can
be modified to meet most specifications.
ABB (www.abb.com) is a leader in power and automation technologies that
enable utility and industry customers to improve performance while lowering
environmental impact. The ABB Group of companies operates in around
100 countries and employs about 120,000 people.
General Purpose Cast Iron Motors
Totally enclosed squirrel cage three phase low
voltage motors,
Sizes 71 - 355, 0.25 to 250 kW
www.abb.com/motors&generators
> Motors
> Low voltage motors
> General purpose motors
Mechanical design................................... 4
Ordering information.............................. 11
Technical data......................................... 12
Variant codes.......................................... 20
Dimension drawings.............................. 23
Rating plates........................................... 32
Construction........................................... 33
Cast iron motors in brief........................ 34
ABB reserves the right to change the
design, technical specification and
dimensions without prior notice.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
3
Mechanical design
Stator
The motor frame including feet, bearing housing and
terminal box is made of cast iron. Integrally cast feet
allow a very rigid mounting and minimal vibration.
Motors can be supplied for foot mounting, flange
mounting and combinations of these.
Drain holes
Motors, frame sizes 280 to 355, are fitted with drain
holes and closable plugs. The plugs are open on delivery. When mounting the motors, ensure that the drain
holes face downwards.
In the case of vertical mounting, the upper plug must be
hammered home completely. In very dusty environ­ments,
both plugs should be hammered home.
Drain holes for motors IEC frame sizes 71 to 250 are
available as modification.
M000060
Drain holes for motors IEC-frame sizes 280 to 355
Terminal boxes
Terminal boxes are mounted on top of the motor as
standard. The terminal box can also be mounted on the
left or right side, see ordering information.
Terminations are suitable for Cu- and Al-cables. Cables
are connected to the terminals by cable lugs which are
not included with the motor.
The terminal box of motor sizes 71 to 250 can be turned
4x90° and in motors sizes 280 to 355 rotated 2x180° to
allow cable entry from either side of the motor.
Degree of protection of standard terminal box is IP 55.
To enable the supply of suitable terminations for the
motor, please state cable type, quantity and size when
ordering. Non-standard design of terminal boxes; e.g.
size, degree of protection, are available as options.
The terminal boxes in sizes 280 to 355 are equipped
with cable glands or cable boxes as standard.
Please see variant codes for options.
Motor sizes 71 to 132
Motor sizes 160 to 250
4
M000063
M000062
M000061
Terminal box examples
Motor sizes 280 to 355, provided either
with a cable gland or a cable box.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Terminal boxes and cable entries
If no ordering information of the cable is given, it is assumed to be p.v.c.-insulated and termination parts are
supplied according to the table below.
In motor sizes 280 to 355 the terminal box is equipped
with cable glands or cable boxes as standard.
To enable the supply of suitable terminations for the
motor, please state cable type, quantity and size when
ordering.
The table below shows the different alternatives available for cable boxes and cable entries. Other types on
request.
Cast iron motor sizes 71 to 250 with top-mounted terminal box
Motor
Poles
size
Cable entry
mm
71M
2xM16×1.5
160M
2,4,6,8
2xM40×1.5
2,4,6,8
2xM40×1.5
2,4,6
Motor
Poles
size
Cable entry
mm
80M
2,4,6
2xM25×1.5
160L
90S
2,4,6
2xM25×1.5
180M
2,4,6,8
2xM40×1.5
90L
2,4,6
2xM25×1.5
180L
2,4,6,8
2xM40×1.5
100L
2,4,6,8
2xM32×1.5
200L
2,4,6,8
2xM50×1.5
112M
2,4,6,8
2xM32×1.5
225S
4,6,8
2xM50×1.5
132S
2,4,6,8
2xM32×1.5
225M
2,4,6,8
2xM50×1.5
132M
2,4,6,8
2xM32×1.5
250M
2,4,6,8
2xM63×1.5
Cable entries for thermistors: 1xM16x1.5 (type 160 to 250)
Cast iron motor sizes 280 to 355 with top-mounted terminal box
Motor
size
Terminal Flange
Flange
Cable gland box
opening
Cable
entry
Cable diameter
Auxiliary
entries
Terminal
bolt
3000 r/min (2 poles)
280 SM_
315 SM_, ML_
355 S
122/2
142/1
162/1
C
D
E-D
3GZF 294 730-749
3GZF 294 730-753
3GZF 294 730-753
3GZF 294 730-613
3GZF 294 730-613
3GZF 294 730-613
2 x M63
2 x M63
2 x M63
2 x Ø32-49
3 x Ø32-49
3 x Ø32-49
2 x M20
2 x M20
2 x M20
M8
M10
M12
1500 r/min (4 poles)
280 SM_
122/2
C
3GZF 294 730-749
3GZF 294 730-613
2 x M63
2 x Ø32-49
2 x M20
M8
315 SM_, ML_
355 S
142/1
162/1
D
E-D
3GZF 294 730-753
3GZF 294 730-753
3GZF 294 730-613
3GZF 294 730-613
2 x M63
2 x M63
3 x Ø32-49
3 x Ø32-49
2 x M20
2 x M20
M10
M12
280 SM_
122/2
C
3GZF 294 730-749
3GZF 294 730-613
2 x M63
2 x Ø32-49
2 x M20
M8
315 SM_, ML_
355 S
142/1
142/2
D
D
3GZF 294 730-753
3GZF 294 730-753
3GZF 294 730-613
3GZF 294 730-613
2 x M63
2 x M63
3 x Ø32-49
3 x Ø32-49
2 x M20
2 x M20
M10
M10
Terminal box
Flange
3GZF294730-749 (280)
3GZF293703-753 (315-355)
Cable gland
3GZF294730-613
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Terminal box
Adapter E-D
3GZF294730-944
M000087
1000 r/min (6 poles)
Flange
3GZF293703-753
(315-355)
Cable gland
3GZF294730-613
5
Alternatives for cable entries and cable boxes for
motor sizes 280 to 355
Motor Terminal box
size
on top
on side
Opening
type
(D/Y-conn.)
Max. rated Max connection Cable gland Auxliary cable Cable box
Blank plate
current A
cable area
diameter
entries
diameter
mm2
280
315
355
C
D
D
E-D
363/210
640/370
640/370
950/550
122/2
NA
142/1
NA
142/2
162/1
2 x 150
2 x M40-63
2 x M20
2 x 240 1 x M40-63
2 x M20
2 x 240
2 x M40-63
2 x M20
4 x 240
max 2xØ60
max 2xØ60
max 2xØ80
max 4xØ60
Opening
Adapter 3GZF
C
D
E
E-D
294730-944
c
e
f
g
d
62
100
100
100
193
300
300
300
62
80
80
80
193
292
292
292
M8
M10
M10
M10
M000088
Flange
MKLN 20
MKLN 30
Bearings
The motors are normally fitted with single-row deep
groove ball bearings as listed in the table below.
When there are high axial forces, angular-contact ball
bearings should be used. This option is available on
request.
When a motor with angular-contact ball bearings is
ordered, the method of mounting and direction and
magnitude of the axial force must be specified. For
special bearings, please see the variant codes.
Basic version with deep groove ball bearings
Motor
size
Number
of poles
Motor
size
Deep groove ball bearings
D-end
N-end
Number
of poles
Deep groove ball bearings
D-end
N-end
71M
2-6
6202 VV C3
6202 VV C3
180M
2-8
6310 ZZ C3
6210 DDU C3
80M
2-6
6204 DDU C3
6204 DDU C3
180L
2-8
6310 ZZ C3
6210 DDU C3
90S
2-6
6205 DDU C3
6205 DDU C3
200L
2-8
6312 ZZ C3
6212 DDU C3
90L
2-6
6205 DDU C3
6205 DDU C3
225S
4-8
6313 ZZ C3
6213 ZZ C3
100L
2-8
6206 DDU C3
6206 DDU C3
225M
2-8
6313 ZZ C3
6213 ZZ C3
112M
2-8
6207 DDU C3
6206 DDU C3
250M
2-8
6314/C3
6214/C3
132S
2-8
6208 DDU C3
6207 DDU C3
280
2
6316/C4
6316/C4
132M
2-8
6208 DDU C3
6207 DDU C3
4-6
6316/C3
6316/C3
160M
2-8
6309 ZZ C3
6209 DDU C3
315
2
6316/C4
6316/C4
160L
2-8
6309 ZZ C3
6209 DDU C3
4-6
6319/C3
6316/C3
355
2
6316M/C3
6316M/C3
4-6
6322/C3
6319/C3
Axially-locked bearings
The D-end bearing is locked, in sizes 71 to 180 with
the spring ring and in sizes 200 to 355 with the inner
bearing cover. The inner ring is locked by tight tolerance to the shaft.
6
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Transport locking
Motors that have roller bearings or an angular contact
ball bearing are fitted with a transport lock before despatch to prevent damage to the bearings during transport. In case of transport locked bearing, motor sizes
280 to 355 are provided with a warning sign.
Locking may also be fitted in other cases where transport
conditions are suspected of being potentially damaging.
Bearing seals
The motors are as standard provided with seals according to table below.
Standard design
Motor
size
Description
D-end
Axial seal
N-end
71 to 132
Sealed bearings (2RS) and axial seal,
gamma ring, at D-end
Alternative design
Radial seal (DIN 3760)
Variant code 072
Number d1
of poles
d 2
B1
b
160 to 225 Axial seal, gamma ring, at D-end
250
Radial seal at D-end
280 Axial seals at both ends
VS 80
VS 80
VS 80
VS 80
80x100x101)
80x100x10
2
4-6
80 100 13.5 10
80 100 13.5 10
315 Axial seals at both ends
VS 80
VS 95
VS 80
VS 80
80x100x101)
95x120x12
2
4-6
80 100 13.5 10
95 120 13.5 12
355 Axial seals at both ends
VS 95
VS 110
VS 95
VS 95
95x120x121)
110x140x121)
2
4-6
1)
95 120 13.5 12
110 140 15.5 12
Viton-seal
Motor sizes 160-225
Motor size 250
Motor sizes 280-355 M000089
Motor sizes 71-132
Bearing life
The nominal life L10 of a bearing is defined according
to ISO as the number of operating hours achieved or
exceeded by 90% of identical bearings in a large test
series under certain specified conditions. 50% of the
bearings achieve at least five times this figure.
The calculated bearing life L10 for power transmission
by means of a coupling (horizontal machine):
Motor sizes 280 to 355 200,000 hours.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
7
Lubrication
On delivery, the motors are lubricated with a type of
grease intended for use in dry or humid environments,
at normal ambient temperature.
Motors 160 to 225 are available with either permanent
greased or, as against variant codes, with regreasable
bearings.
Standard versions of motors 71 to 225 are lubricated
for life, with lithium based grease.
Motors 250 to 355 have grease value lubrication for lubrication in service. The lubrication intervals and quantity
are stated in the maintenance manual which comes with
the motor.
Pulley diameter
When the desired bearing life has been determined,
the minimum permissible pulley diameter can be calculated with FR (or FRX), according to the formula:
D=
1.9 • 107 • K • P
N • FR
Where:
D = diameter of pulley, mm
P = power requirement, kW
N = motor speed, r /min
K = belt tension factor, dependent on belt type and
type of duty. A common value for V belts is K=
2.5
FR = permissible radial force
Permissible loadings on shaft
Motors are foot-mounted IM B3 version with force
directed sideways. In some cases the strength of the
shaft affects the permissible forces.
If the radial force is applied between points X0 and
Xmax, the permissible force FR can be calculated from
the following formula:
X
FR = FX0 - E (FX0 - FXmax)
E = length of shaft extension in basic version
M0000145
The tables below give the permissible radial force in
Newtons,assuming zero axial force. The values are
based on normal conditions at 50 Hz and calculated
bearing lives of 20,000 and 40,000 hours.
At 60 Hz the values must be reduced by 10 %.
Permissible radial forces
Motor
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
40,000
size
Poles
E (mm)
FX0 (N)
FXmax (N)
FX0 (N)
FXmax (N)
71 M
80 M
90 S
2
4
6
2
4
6
8
2
4
6
8
30
30
30
40
40
40
40
40
40
40
40
381
480
555
624
788
907
997
686
870
1000
1095
322
405
469
509
643
740
813
542
687
790
866
303
381
441
495
626
720
791
545
690
794
870
256
322
372
404
511
587
646
430
545
627
687
8
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Permissible radial forces
Motors
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
40,000
size
Poles
E (mm)
FX0 (N)
FXmax (N)
FX0 (N)
90 L
100 L
112 M
132 S
132 M
160 M
160L
180M
180L
200L
225S
225M
250M
280SM_
315SM_
315ML
355 S_
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
4
6
8
2
4
6
8
2
4
6
8
2
4
4
6
8
2
4
6
8
4
8
2
4
6
8
2
4
6
8
2
4
6
2
4
6
2
4
6
2
4
6
50
50
50
50
60
60
60
60
60
60
60
60
80
80
80
80
80
80
80
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
140
140
110
110
110
110
140
140
140
140
140
140
140
140
170
170
140
140
140
140
210
210
696
885
1015
1112
979
1234
1419
1566
1258
1592
1831
2020
1435
1821
2079
2299
1840
2107
2329
1544
1948
2232
2465
1563
1971
2259
2495
2984
3759
3802
4352
4800
4090
5162
5909
6518
5763
7261
4591
5791
6644
7296
5112
6440
7388
8113
7300
9200
10600
7300
11300
13000
7300
11300
13000
9000
15200
17300
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
564
717
823
901
785
989
1137
1255
1014
1284
1477
1629
1122
1423
1625
1797
1476
1690
1869
1200
1513
1734
1916
1243
1568
1797
1984
2371
2988
3073
3518
3881
3377
4262
4879
5382
4526
5703
3811
4594
5271
5788
4170
5254
6027
6619
6200
7800
8900
6000
9400
10600
6000
9400
10600
7900
12500
14200
553
702
806
883
777
979
1126
1243
998
1264
1453
1603
1139
1445
1650
1825
1461
1672
1849
1226
1546
1772
1957
1240
1565
1793
1980
2368
2984
3017
3454
3810
3246
4097
4690
5173
4574
5763
3644
4596
5273
5791
4057
5111
5864
6439
5800
7300
8400
5800
9000
10300
5800
9000
10300
6200
12000
13700
FXmax (N)
448
569
653
715
622
785
903
996
805
1019
1172
1293
890
1130
1290
1427
1172
1341
1483
952
1201
1377
1520
987
1244
1426
1575
1882
2371
2439
2792
3080
2680
3383
3872
4272
4593
4526
3025
3646
4184
4594
3310
4170
4784
5253
4900
6200
7100
4950
7500
8500
4950
7500
8500
5300
9850
11300
9
Permissible axial forces
bearings and calculated bearing lives of 20,000 and
40,000 hours.
Motors are foot-mounted IM B3 version.
At 60 Hz the values are to be reduced by 10%.
Mounting arrangement IM B3 FAD
M000022
The following tables give the permissible axial forces
in Newton, assuming zero radial force. The values are
based on normal conditions at 50 Hz with standard
FAZ
Motor
size
20,000 hours40,000 hours
2-pole
4-pole
6-pole
8-pole
2-pole 4-pole
6-pole
8-pole
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
71
80
90
270
430
470
270
430
470
100
112
132 S_
132 M_
650
840
950
-
650
840
950
-
1020
1970
-
2570
-
2870
3220
1020
1970
-
2570
-
2870
3220
280
315
355 -
-
800 800
870 870
360
590
650
440
710
780
440
710
780
880 880
1160 1160
1300 1300
1300 1300
1060
1380
1540
1540
1060
1380
1540
1540
1200
1570
1760
1760
1380
2660
2660
3490
3900
3900
4380
1650
-
3200
4200
-
4720
5290
1650
-
3200
4200
-
4720
5290
7300 5300 8000 6000 9000 7000
7000 5000 9000 7000 10600 8600
10500 3500 13500 6500 15300 8300
1380
2660
2660
3490
3900
3900
4380
FAZ


FAD
Mounting arrangement IM V1 200
320
350
200
320
350
270
440
470
270
440
470
1200
1570
1760
1760
480
620
690
-
480
620
690
-
650
850
960
950
650
850
960
950
1880
-
3620
4750
5310
5310
5960
1880
-
3620
4750
5310
5310
5960
740
1440
-
1890
-
2120
2380
740
1440
-
1890
-
2120
2380
1020
1970
1970
2580
2880
2880
3220
1020
1970
1970
2580
2880
2880
3220
-
-
-
-
-
-
Motor
size
20,000 hours
2-pole
4-pole
6-pole
8-pole
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
N
N
N
N
N
N
N
N
71
80
90
280
450
500
260
410
440
100
112
132 S_
132 M_
710
920
1050
-
590
770
830
-
160 M_
160 L_
180 M_
180 L_
200
225 S_
225 M_
250
1240
1320
2320
-
3050
-
3570
4090
750
710
1630
-
2050
-
2180
2360
350
560
600
-
600 600
650 650
780 780
1020 1020
1140 1140
1140 1140
890
1170
1310
1310
890
1170
1310
1310
1210
-
2350
3080
-
3460
3880
1390
-
2670
3500
3900
3900
4380
1390
2670
3500
3900
3900
4380
1210
-
2350
3080
-
3460
3880
5750 3750 6200 4200 6900 4900 7700 5700
5600 3600 6900 4900 7900 5900 8900 6900
8750 1750 10800 3800 12000 5000 13300 6300
40,000 hours 2-pole
4-pole
6-pole
FAD
FAZ
FAD
FAZ
FAD
FAZ
N
N
N
N
N
N
8-pole
FAD
FAZ
N
N
-
830
920
-
770
830
210
340
380
190
300
320
280
460
510
250
410
440
340
550
620
310
500
530
950 800
1260 1050
1450 1160
1480 1120
1140 980
1490 1270
1690 1400
1730 1320
1280
1680
1930
1950
1110
1470
1600
1580
530
690
800
-
420
540
570
-
720
950
1100
1130
560
740
810
770
860
1130
1280
1320
700
910
990
910
970
1270
1470
1490
800
1060
1140
1120
1670
1730
3100
3170
4100
4680
4770
5570
1960
2050
-
3750
4830
-
5650
6520
1340
1250
-
2650
3510
-
3790
4070
2140
2260
-
4160
5450
6120
6250
7210
1560
1500
-
3100
4060
4500
4370
4700
970
1050
1780
-
2370
-
2810
3240
480
440
1100
-
1370
-
1420
1520
1300
1370
2400
2480
3180
3650
3740
4420
730
670
1540
1460
1970
2100
2020
2030
1530
1610
-
2900
3700
-
4390
5100
900
820
-
1800
2390
-
2530
2650
1650
1770
-
3200
4200
4720
4850
5630
1070
1010
2140
2800
3090
2960
3120
280
8500 4300 9500 4600 11000
315 SM_ 9000 3700 11600 5400 13500
315 ML_ 9600 3400 12400 5000 14800
1)
355 S_
10000
18500 3800 21200
5500
6200
5600
5000
-
-
-
-
-
-
-
-
6950 2700 7700 2800 8900 3350
7450 2100 9450 3200 10900 3650
8100 1850 10100 2850 12200 3150
1)
12200
15700 1000 18000 1750
-
-
-
-
-
1100
1030
2230
2150
2880
3130
3040
3180
450
740
820
320
530
580
420
560
730
1)
380
620
590
320
530
580
M000023
160 180M
180L
200
225S
225M
250
360
590
650
-
620 560
690 600
On request
10
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M2QA 90S4A
Pole number
4
Mounting arrangement (IM-code)IM B3 (IM 1001)
Rated output
1.1 kW
Product code
3GQA092101-ADA
Variant codes if needed
The product code of the motor is composed in
accordance with the following example.
A
B
C
D, E, F
G
M2QA 90S4A 3GQA 092101 - AD A 003 etc.
1-4
5-6 7 8-10 11 12 13 14
A Motor type
B Motor size
C Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
Explanation of the product code (C, D, E, F):
Positions 1 to 4
3GQA = Totally enclosed fan cooled squirrel cage motor with cast iron frame
Positions 5 and 6
IEC frame
07 = 71
11= 112
08 = 80
13= 132
09 = 90
16= 160
10 =100
18= 180
Position 7
Speed (Pole pairs)
1 = 2 poles
2 = 4 poles
3 = 6 poles
4 = 8 poles
5 = 10 poles
6
7
8
9
20 = 200
22= 225
25= 250
28= 280
Position 12
Mounting arrangement
A =Foot-mounted, top-mounted terminal box
R = Foot-mounted, terminal box on RHS,
seen from D-end
L = Foot-mounted, terminal box on LHS,
seen from D-end
B = Flange-mounted, large flange
C = Flange-mounted, small flange sizes (71-112)
H = Foot- and flange-mounted
31 = 315
35 = 355
Position 13
Voltage and frequency code
See tables on appropriate page
= 12 poles
= >12 poles
= Two-speed motors
= Multi-speed motors
Position 14
Generation code
A, B, C…
The product code must be, if needed, followed by
variant codes.
Positions 8 to 10
Serial number
Position 11
‑ (dash)
Code letters for supplementing the product code
Code letter for voltage and frequency
Direct start or, with ∆-connection, also Y/∆-start
Motor
S
D
H
E
F
T
U
size
50Hz
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
71-250
220-240 V∆
440-480 VY 380-420 V∆
440-480V1)∆415 V∆ 500 V∆ 575 V∆ 500 VY 660 V∆ 690 V∆
380-420 VY
-
660-690 VY
-
-
-
-
-
-
-
280-400 220, 230 V∆
-
380, 400, 415 V∆ 440V∆
415 V∆
500 V∆ -
500 VY 660 V∆ 690 V∆
380,400,415VY 440VY
660, 690 VY -
-
-
-
-
-
-
1
) 480 V not stamped on sizes 160 to 250
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
X
Other rated
voltage,
connection or
frequency, 690 V maximum
11
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Efficiency
Output
kW
Motor type
Product code
3000 r/min = 2-poles
0.37
0.55
0.75
1.1
1.5
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
Current
factor
cos ϕ
100%
IN
Is
TN
Ts
Tmax
A
IN
Nm
TN
TN
1.27
1.89
2.52
3.68
5.03
5.03
7.37
10.02
13.17
17.99
24.53
35.85
49.06
60
71
96
119
144
177
241
289
353
423
513
641
800
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.3
2.2
2.3
2.5
2.4
1.7
1.7
1.5
1.7
1.7
2.6
1.5
3.0
2.7
3.0
2.2
2.5
2.5
3.5
3.0
3.2
3.0
3.5
3.1
2.6
2.7
2.5
2.6
2.6
2.7
2.7
2.6
2.5
2.5
2.5
2.4
3.1
2.8
2.0
2.0
2.2
2.3
2.3
2.2
2.5
2.4
1.9
2.1
2.2
2.2
2.8
2.8
2.6
2.8
2.8
2.6
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
071 301-••A
071 302-••A
081 301-••A
081 302-••A
091 101-••A
091 101-••A
091 501-••A
101 501-••A
111 301-••A
131 101-••A
131 102-••A
161 301-••A
161 302-••A
161 501-••A
181 301-••A
201 501-••A
201 502-••A
221 301-••A
251 301-••A
281 210-••D
281 220-••D
311 210-••D
311 220-••D
311 230-••D
311 410-••D
351 100-••D
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
111 501-••A
131 301-••B
131 302-••B
161 502-••A
181 501-••A
201 503-••A
221 302-••A
251 302-••A
281 230-••D
3000 r/min = 2-poles
5.5
9.2
11
22
30
45
55
75
110
Full
3/4
Speed load
load
r/min
100% 75%
Power
2780
2785
2840
2855
2850
2850
2850
2860
2900
2920
2920
2930
2920
2930
2940
2955
2955
2970
2960
2974
2970
2979
2977
2976
2980
2983
70.0
73.0
75.0
78.0
79.0
79.0
81.5
83.0
85.0
87.5
88.5
90.0
90.0
90.5
90.8
91.4
92.2
92.6
93.4
94.1
94.5
94.1
94.7
95.1
95.7
95.7
Basic design
68.0
72.4
75.5
77.9
79.0
79.0
81.8
83.2
84.6
87.9
90.1
90.5
90.1
90.9
91.0
91.1
91.8
92.2
91.7
93.6
94.2
93.4
94.1
94.8
95.3
95.3
0.81
0.82
0.85
0.85
0.87
0.87
0.86
0.88
0.90
0.89
0.90
0.89
0.89
0.90
0.90
0.90
0.90
0.89
0.89
0.87
0.89
0.85
0.87
0.88
0.88
0.89
3)
0.90
0.88
0.90
0.90
0.90
0.90
0.89
0.89
0.90
400 V 50 Hz
1)
Temperature rise class F by voltage 400 V 50 Hz.
2)
Temperature rise class F by voltage 380 V 50 Hz.
3)
Missing data on request.
2900
2910
2900
2930
2950
2955
2975
2970
2973
82.0
85.5
88.0
88.0
90.8
92.0
92.6
91.0
95.0
Torque
0.94
1.33
1.7
2.4
3.15
3.15
4.53
5.93
7.55
10.2
13.6
19.82
27.03
32.78
38.86
52
64
78
96
134
156
198
232
273
345
424
6.1
6.1
6.1
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.5
6.7
6.4
6.3
6.3
6.2
7.9
6.8
High-output design
3)
3)
3)
3)
3)
3)
3)
94.8
10.76
17.65
20.05
40.09
53
78
96
134
187
7.0
7.5
8.0
6.5
6.5
7.0
7.0
7.0
6.7
18.1
30.2
36.2
71
97
145
177
241
353
The two bullets in the product code indicate choice of mounting
arrangement, voltage and frequency (see ordering information page).
12
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Speed
r/min
Efficiency
%
3000 r/min = 2-poles
380 V 50 Hz
0.37
0.55
0.75
1.1
1.5
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2765
2780
2825
2840
2835
2835
2835
2845
2885
2905
2905
2918
2917
2920
2940
2950
2950
2965
2956
2970
2966
2976
2974
2972
2978
2981
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
70.0
73.0
75.5
77.5
79.0
79.0
81.5
83.0
85.0
87.5
87.5
90.0
90.0
90.5
90.8
91.2
91.7
92.2
93.2
94.0
94.2
94.1
94.5
95.0
95.6
95.7
Power
factor
cos ϕ
Current
IN
Speed
A
r/min
0.83
0.84
0.86
0.86
0.90
0.90
0.89
0.90
0.92
0.90
0.90
0.91
0.91
0.91
0.91
0.91
0.91
0.90
0.90
0.88
0.89
0.86
0.87
0.88
0.89
0.90
0.97
1.37
1.75
2.52
3.23
3.23
4.61
6.14
7.82
10.7
14.5
20.41
27.82
34.13
40.45
54
67
82
100
137
163
208
243
290
358
440
2795
2800
2855
2870
2865
2865
2865
2875
2915
2935
2935
2930
2932
2935
2955
2960
2960
2975
2962
2976
2974
2980
2979
2978
2982
2984
Efficiency
%
Power
factor
cos ϕ
Current
IN
A
Moment
of inertia
J=1/4 GD2
kgm2
0.79
0.79
0.85
0.83
0.86
0.86
0.83
0.86
0.87
0.88
0.90
0.87
0.88
0.89
0.88
0.89
0.89
0.87
0.88
0.86
0.88
0.83
0.85
0.88
0.87
0.88
0.93
1.33
1.64
2.37
3.08
3.08
4.56
5.85
7.53
9.94
13.1
19.54
26.35
31.95
38.3
51
62
77
93
130
151
197
230
265
335
412
0.0003
0.00037
0.00091
0.00107
0.00135
0.00135
0.00163
0.00402
0.00671
0.01241
0.01491
0.0436
0.0551
0.06549
0.08805
0.14821
0.16822
0.29345
0.3784
0.7
0.82
1.05
1.25
1.5
1.95
2.7
415 V 50 Hz
70.0
73.0
75.0
78.0
79.0
79.0
81.0
83.5
85.0
88.0
89.0
90.0
90.0
90.5
90.8
91.3
92.3
92.6
93.5
94.2
94.6
94.1
94.7
95.2
95.7
95.7
Basic design
3000 r/min = 2-poles
380 V 50 Hz
5.5
9.2
11
22
30
45
55
75
110
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
2968
94.8
0.90
198
2975
95.1
0.89
180
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
415 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Weight
kg
Sound
pressure
level LP
dB(A)
10
11
16
17
21
21
24
33
42
58
63
112
122
142
170
235
254
328
390
570
610
820
870
960
1130
1500
56
56
57
58
61
61
61
65
67
70
70
72
72
72
72
81
81
81
84
78
78
83
83
83
83
83
High-output design
0.00826
0.01500
0.01768
0.06549
0.10339
0.18473
0.33431
0.45829
1.05
49
68
73
130
185
276
340
411
660
70
71
73
75
75
81
81
85
78
13
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Product code
1500 r/min = 4-poles
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L4A
132 M4B
132 M4C
160 L4B
180 L4B
200 L4B
225 M4B
250 M4B
280 SMC
Power
Current
Full
load
100%
factor
cos ϕ
100%
IN
Is
TN
Ts
Tmax
A
IN
Nm
TN
TN
1.71
2.53
3.73
5.06
7.5
10.31
14.69
20.18
26.71
36.73
49.74
71
98
120
142
194
238
290
354
483
580
707
849
1028
1286
1604
2.1
2.1
2.4
2.4
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.4
2.3
2.3
2.4
2.2
2.2
2.2
2.4
2.1
2.1
1.7
1.9
2.1
2.1
2.0
2.7
2.7
2.7
2.6
2.4
2.6
2.7
2.8
2.8
2.9
2.7
2.8
2.4
3.0
3.0
2.9
2.7
2.7
2.7
2.6
2.4
2.3
2.4
2.6
2.5
2.6
2.2
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.7
2.2
2.2
2.2
2.4
2.6
2.6
2.4
2.4
2.8
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
072 301-••A
072 302-••A
082 301-••A
082 302-••A
092 101-••A
092 501-••A
102 501-••A
102 502-••A
112 301-••A
132 101-••A
132 301-••A
162 301-••A
162 501-••A
182 301-••A
182 501-••A
202 501-••A
222 101-••A
222 301-••A
252 301-••A
282 210-••D
282 220-••D
312 210-••D
312 220-••D
312 230-••D
312 410-••D
352 100-••D
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
112 501-••A
132 302-••A
132 303-••A
162 502-••A
182 502-••A
202 502-••A
222 302-••A
252 302-••A
282 230-••D
1500 r/min = 4-poles
5.5
9.2
11
18.5
30
37
55
75
110
Speed
r/min
Efficiency
1395
1395
1410
1415
1400
1390
1430
1420
1430
1430
1440
1460
1460
1470
1470
1470
1480
1480
1480
1483
1481
1486
1485
1486
1485
1488
65.5
68.5
73.5
74.5
77.5
78.5
81.5
82.8
85.0
86.0
88.5
89.5
90.0
91.0
91.5
92.2
92.6
92.8
93.4
94.2
94.6
94.6
94.9
95.4
95.7
95.6
Basic design
63.3
69.4
71.4
75.2
77.8
79.2
82.3
82.5
84.6
87.1
88.3
90.0
90.4
90.9
90.0
91.8
91.2
91.7
91.3
94.2
94.7
94.2
94.7
95.2
95.6
95.3
0.72
0.75
0.72
0.75
0.78
0.79
0.81
0.83
0.82
0.85
0.85
0.85
0.86
0.86
0.88
0.88
0.85
0.87
0.87
0.83
0.86
0.84
0.85
0.85
0.86
0.85
0.77
1.04
1.5
1.93
2.65
3.5
4.85
6.3
8.29
10.9
14.4
20.87
27.97
34.12
39.44
53
67
80
98
138
162
203
239
286
354
448
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
95.1
0.83
0.85
0.85
0.86
0.88
0.88
0.87
0.87
0.85
11.39
18.6
22.11
35.69
55
68
100
137
196
400 V 50 Hz
1430
1430
1430
1460
1470
1470
1480
1480
1484
1)
Temperature rise class F by voltage 400 V 50 Hz.
2)
Temperature rise class F by voltage 380 V 50 Hz.
3)
Missing data on request.
84.0
84.0
84.5
87.0
89.0
89.2
91.0
90.4
95.1
Torque
5.2
5.2
5.2
6.0
6.0
6.0
6.0
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.0
6.3
6.4
6.4
6.1
6.7
6.4
6.7
High-output design
7.0
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.1
36.7
61
73
121
195
240
355
484
708
The two bullets in the product code indicate choice of mounting
arrangement, voltage and frequency (see ordering information page).
14
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Speed
r/min
Efficiency
%
1500 r/min = 4-poles
380 V 50 Hz
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
1385
1385
1400
1405
1390
1380
1420
1410
1420
1420
1430
1455
1452
1465
1465
1465
1475
1475
1477
1480
1478
1484
1483
1483
1482
1487
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1500 r/min = 4-poles
5.5
9.2
11
18.5
30
37
55
75
110
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
66.0
69.0
73.5
74.5
77.0
78.5
81.5
82.5
84.5
85.5
88.0
89.5
90.0
91.0
91.5
92.3
92.3
92.6
93.2
94.0
94.2
94.5
94.8
95.0
95.2
95.6
Power
factor
cos ϕ
Current
IN
Speed
A
r/min
Power
factor
cos ϕ
Current
IN
A
415 V 50 Hz
0.74
0.78
0.75
0.78
0.80
0.80
0.82
0.85
0.84
0.87
0.85
0.87
0.88
0.88
0.90
0.89
0.85
0.88
0.88
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.78
1.05
1.52
1.97
2.72
3.64
4.98
6.5
8.57
11.3
15.2
21.46
28.78
35.1
40.59
55
71
83
102
143
169
209
248
300
375
465
1405
1405
1420
1425
1410
1400
1440
1430
1440
1440
1450
1463
1461
1470
1475
1470
1480
1480
1482
1484
1483
1487
1486
1487
1486
1489
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
64.0
68.0
72.5
74.0
77.5
78.5
81.4
82.7
85.0
86.5
88.0
89.5
90.0
91.0
91.5
92.2
92.0
92.8
93.6
94.2
94.7
94.6
95.0
95.4
95.7
95.6
0.79
1.07
1.55
1.96
2.65
3.48
4.85
6.17
8.24
10.7
14.1
20.6
27.28
34.49
38.9
55
68
79
95
137
157
198
232
279
343
438
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
94.8
0.86
204
1485
95.2
0.84
191
415 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.69
0.71
0.68
0.72
0.75
0.77
0.78
0.82
0.80
0.83
0.84
0.83
0.85
0.82
0.86
0.88
0.82
0.85
0.86
0.82
0.85
0.82
0.84
0.84
0.85
0.84
380 V 50 Hz
112 L4A 3)
132 M4B 3)
132 M4C 3)
160 L4B 3)
180 L4B 3)
200 L4B 3)
225 M4B 3)
250 M4B 3)
280 SMC 1481
Efficiency
%
0.00053
0.00066
0.00145
0.00174
0.00254
0.00317
0.00679
0.00862
0.01306
0.02673
0.03432
0.06543
0.09349
0.16049
0.18046
0.2819
0.37
0.42
0.78
1.05
1.32
1.9
2.2
2.6
3.2
5.4
11
11
16
17
21
25
32
36
45
60
73
116
137
170
186
254
308
335
450
560
600
800
855
930
1030
1500
43
45
46
46
52
52
53
53
56
59
59
66
66
66
66
71
73
73
76
71
71
78
78
78
78
82
High-output design
0.01484
0.0347
0.04227
0.10686
0.20783
0.29715
0.6244
0.9125
1.7
49
75
80
147
200
277
351
485
660
64
71
73
66
70
72
75
77
71
15
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Product code
Speed
r/min
1000 r/min = 6-poles
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M6B
132 M6C
160 L6B
180 L6B
200 L6C
225 M6B
250 M6B
280 SMC
Power
Current
Full
load
100%
factor
cos ϕ
100%
IN
Is
TN
Ts
Tmax
A
IN
Nm
TN
TN
1.8
1.8
1.9
1.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.2
2.3
2.2
2.1
2.2
2.3
2.4
2.4
1.9
1.9
2.1
2.2
1.8
2.4
2.5
2.0
1.8
2.3
2.6
2.4
2.3
2.4
2.9
3.0
2.3
2.4
2.9
2.5
3.2
2.9
2.6
2.4
2.4
2.3
2.3
2.6
2.5
2.3
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
073 301-••A
073 302-••A
083 301-••A
083 302-••A
093 101-••A
093 501-••A
103 501-••A
113 301-••A
133 101-••A
133 301-••A
133 302-••A
163 301-••A
163 501-••A
183 501-••A
203 501-••A
203 502-••A
223 301-••A
253 301-••A
283 210-••D
283 220-••D
313 210-••D
313 220-••D
313 230-••D
313 410-••D
353 100-••D
910
890
930
925
920
920
940
940
960
960
960
970
970
980
980
980
980
980
990
989
992
991
991
991
992
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
113 302-••A
133 303-••A
163 502-••A
183 502-••A
203 503-••A
223 302-••A
253 302-••A
283 230-••D
950
970
970
980
980
980
980
989
1000 r/min = 6-poles
3
6.5
14
18.5
30
37
45
75
Efficiency
55.0
60.0
63.0
65.0
71.0
73.0
76.0
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.3
90.4
90.8
92.2
93.5
93.8
94.2
94.8
95.1
95.3
95.3
50.1
58.3
63.2
65.1
70.2
73.1
75.3
81.2
83.5
84.2
85.6
88.3
88.6
89.1
90.2
90.3
89.2
92.4
93.3
93.7
94.0
94.7
95.0
95.2
95.2
Basic design
0.65
0.65
0.66
0.68
0.72
0.74
0.77
0.76
0.78
0.77
0.79
0.78
0.78
0.82
0.82
0.83
0.78
0.88
0.82
0.83
0.80
0.83
0.82
0.83
0.83
0.73
0.93
1.29
1.8
2.12
2.94
3.78
5.23
6.73
8.93
11.7
15.77
23
29.67
36.06
42.32
61
66
85
103
145
166
206
242
293
4.0
4.0
5.0
5.0
5.0
5.0
5.5
5.5
6.5
6.5
6.5
6.0
6.0
6.0
6.0
6.0
6.6
6.8
6.7
6.4
6.3
6.5
6.7
6.5
6.2
0.76
0.78
0.78
0.82
0.78
0.78
0.88
0.83
740
14.49
30.3
37.87
63
78
82
139
6.5
6.5
6.0
6.0
6.0
6.6
6.8
6.9
400 V 50 Hz
1)
Temperature rise class F by voltage 400 V 50 Hz.
2)
Temperature rise class F by voltage 380 V 50 Hz.
3)
Missing data on request.
77.0
83.0
85.5
86.0
87.4
87.8
89.2
94.5
3)
3)
3)
3)
3)
3)
3)
94.5
Torque
1.89
2.68
3.8
5.68
7.79
11.42
15.24
22.35
29.84
39.79
54
73
108
146
180
214
292
360
434
531
722
867
1060
1272
1540
High-output design
30.2
64
138
180
292
361
439
724
1.9
1.9
2.1
2.2
2.0
2.1
2.2
2.6
2.1
2.1
2.2
2.7
2.6
2.6
2.6
2.5
The two bullets in the product code indicate choice of mounting
arrangement, voltage and frequency (see ordering information page).
16
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Speed
r/min
1000 r/min = 6-poles
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
Efficiency
%
Power
factor
cos ϕ
Current
IN
Speed
r/min
A
380 V 50 Hz
905
885
925
920
915
915
935
935
955
955
945
968
966
980
975
975
980
978
988
987
990
990
990
989
991
55.5
60.0
63.5
65.0
71.0
73.0
76.0
79.0
82.0
84.0
85.5
88.0
88.5
89.0
90.6
90.9
90.5
92.0
93.9
93.5
94.1
95.7
94.9
95.1
95.2
0.69
0.65
0.70
0.71
0.75
0.77
0.79
0.77
0.81
0.77
0.80
0.79
0.80
0.84
0.84
0.84
0.78
0.90
0.83
0.84
0.82
0.84
0.83
0.83
0.83
Efficiency
%
Power
factor
cos ϕ
Current
IN
A
415 V 50 Hz
0.72
0.98
1.29
1.82
2.13
2.98
3.8
5.5
6.87
9.39
12.3
16.39
23.61
30.48
36.94
43.79
64
68
89
108
148
174
215
255
307
915
895
935
930
925
925
945
945
965
965
955
975
975
985
980
980
980
982
990
990
992
992
991
991
993
52.5
59.0
62.0
65.5
70.5
73.0
75.5
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.1
90.1
90.9
92.3
93.5
93.8
94.2
94.8
95.0
95.3
95.3
0.62
0.62
0.62
0.66
0.69
0.70
0.75
0.75
0.76
0.75
0.78
0.75
0.75
0.79
0.79
0.81
0.76
0.86
0.80
0.82
0.77
0.81
0.80
0.82
0.82
0.77
0.95
1.33
1.79
2.15
2.98
3.73
5.14
6.66
8.84
11.4
15.81
23.06
29.68
36.16
41.93
60
64
84
101
143
163
203
237
287
0.00056
0.00074
0.00159
0.00196
0.00292
0.00379
0.00999
0.03116
0.03116
0.04074
0.05332
0.09231
0.1297
0.2418
0.34174
0.46837
0.62691
0.97
1.6
1.9
2.8
3.6
4.4
5.3
7.3
0.0199
0.0611
0.139
0.28398
0.495
0.80327
1.32
2.6
1000 r/min = 6-poles
380 V 50 Hz
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
94.3
0.84
144
990
94.6
0.82
135
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M6B 3)
132 M6C 3)
160 L6B 3)
180 L6B 3)
200 L6C 3)
225 M6B 3)
250 M6B 3)
280 SMC 987
415 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
3
6.5
14
18.5
30
37
45
75
1)
Moment
of inertia
J=1/4 GD2
kgm2
10
11
17
18
21
25
32
40
55
65
75
119
140
180
231
254
308
382
540
580
780
870
930
1040
1500
42
42
45
45
48
48
51
54
56
56
56
61
62
63
64
64
66
68
71
71
75
75
75
75
77
High-output design
45
75
155
196
291
351
455
660
56
59
64
65
66
68
71
71
17
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
Product code
750 r/min = 8-poles
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
2
3.8
8.5
15
18.5
30
37
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
Power
Current
Full
load
100%
3/4
load
75%
factor
cos ϕ
100%
IN
Is
TN
Ts
Tmax
A
IN
Nm
TN
TN
50.1
53.3
62.1
63.3
70.1
70.3
75.4
81.8
81.4
84.0
85.6
85.8
87.0
89.4
89.1
88.2
90.1
0.60
0.60
0.60
0.60
0.64
0.65
0.68
0.70
0.75
0.73
0.74
0.74
0.77
0.76
0.75
0.75
0.79
0.85
1.11
1.42
2.07
2.42
3.45
4.27
5.6
7.13
9.42
12.55
16.91
23.51
32.009
39.56
46.78
60
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.1
2.1
2.1
2.0
2.3
2.1
2.2
2.3
1.9
1.9
1.9
2.0
2.2
2.4
2.4
2.5
2.2
2.6
2.8
2.5
2.8
2.8
2.7
2.7
2.4
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
084 301-••A
084 302-••A
094 101-••A
094 501-••A
104 501-••A
104 502-••A
114 301-••A
134 101-••A
134 301-••A
164 301-••A
164 302-••A
164 501-••A
184 501-••A
204 501-••A
224 101-••A
224 301-••A
254 301-••A
750 r/min = 8-poles
1)
Speed
r/min
Efficiency
700
700
700
700
700
700
700
710
710
720
720
720
730
730
740
740
740
51.0
54.5
62.5
63.5
70.0
71.5
75.0
81.0
81.0
84.0
85.5
86.5
87.7
89.0
90.0
90.5
91.3
Basic design
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
114 302-••A
134 302-••A
164 502-••A
184 502-••A
204 502-••A
224 302-••A
254 302-••A
1)
Temperature rise class F by voltage 400 V 50 Hz.
2)
Missing data on request.
700
710
720
730
730
740
740
72.0
78.0
83.5
84.7
86.0
87.5
88.3
Torque
3.3
3.6
4.4
4.7
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.5
5.4
5.5
5.5
6.0
6.5
2.46
3.41
5.05
7.5
10.23
15.01
20.46
29.59
40.35
53
72
99
143
196
238
283
387
High-output design
2)
2)
2)
2)
2)
2)
2)
0.68
0.75
0.74
0.77
0.76
0.75
0.79
5.94
9.38
19.86
33.2
40.85
66
76
5.2
5.5
5.5
5.4
5.4
6.3
6.5
27.3
51
113
196
242
387
478
1.7
1.7
2.0
1.9
1.9
2.1
2.2
1.9
1.9
2.4
2.6
2.6
2.6
2.5
The two bullets in the product code indicate choice of mounting
arrangement, voltage and frequency (see ordering information page).
18
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Technical data for totally enclosed squirrel
cage three phase motors IP 55 – IC 411 – Insulation class F, temperature rise class B
Output
kW
Motor type
EffiSpeed ciency
r/min %
750 r/min = 8-poles
380 V 50 Hz
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
695
695
695
695
695
695
695
705
705
715
715
715
725
725
740
740
738
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
51.0
54.0
62.0
63.0
70.0
71.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.9
89.9
90.4
91.1
Power
factor
cos ϕ
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos ϕ
Current
IN
A
415 V 50 Hz
0.61
0.61
0.61
0.61
0.67
0.68
0.68
0.75
0.78
0.76
0.76
0.77
0.79
0.78
0.75
0.76
0.80
0.88
1.16
1.49
2.18
2.43
3.45
4.47
5.6
7.22
9.52
12.86
17.11
24.12
32.86
41.69
48.65
63
705
705
705
705
705
705
705
715
715
720
720
722
730
730
745
745
741
51.5
54.5
62.5
63.5
69.0
70.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.8
90.3
90.3
91.4
0.60
0.60
0.60
0.60
0.64
0.62
0.67
0.69
0.72
0.70
0.70
0.70
0.74
0.74
0.71
0.71
0.78
0.82
1.08
1.38
2.01
2.39
3.47
4.16
5.55
7.11
9.46
12.78
17.23
23.58
31.75
40.14
47.74
58
380 V 50 Hz
2
3.8
8.5
15
18.5
30
37
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
415 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
750 r/min = 8-poles
1)
Moment
of inertia
J=1/4 GD2
kgm2
0.00111
0.00326
0.00541
0.00756
0.00971
0.01186
0.01559
0.03625
0.04141
0.0676
0.09524
0.12122
0.23645
0.37103
0.53287
0.65825
0.975
16
17
21
24
31
34
42
56
64
105
125
142
176
235
290
302
392
42
42
46
46
53
53
55
55
56
58
58
58
61
63
65
65
67
High-output design
0.0199
0.04776
0.1312
0.28398
0.46854
0.80327
1.28
45
75
136
196
274
349
436
58
59
61
63
65
67
69
19
General purpose cast iron motors - Variant codes
Code
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
Balancing
052
Vibration acc. to grade A (IEC 60034-14).
P
P
P
M
M
S
417
Vibration acc. to grade B (IEC 60034-14).
M
M
M
R
R
NA
424
Full key balancing.
M
M
M
M
M
NA
Transport lock for bearings.
NA
NA
NA
M
M
M
037
Roller bearing at D-end.
NA
NA
NA
M
M
M
039
Cold resistant grease (-55... +100°C). For frame sizes 160-225, only posM
sible when using regreasable bearings.
Heat resistant grease (-25... 150°C). For frame sizes 160-225, only possible
M
when using regreasable bearings.
M
M
M
M
M
M
M
M
M
M
Bearings and lubrication
036
040
041
Bearings regreasable via grease nipples.
NA
NA
M
M
M
S
043
SPM compatible nipples for vibration measurement.
NA
NA
M
M
M
M/S
M
M
M
M
M
M
Branch standard designs
178
Stainless steel/acid proof bolts.
209
Non-standard voltage or frequency, (special winding).
M
M
M
M
M
NA
425
Corrosion protected stator and rotor core. (only core as standard).
M
M
M
M
M
NA
785
Reinforced tropicalisation.
R
R
R
R
R
R
Cooling system
068
Light alloy metal fan.
M
M
M
M
M
M
183
Separate motor cooling fan (fan axial, N-end).
P
M
M
M
M
NA
M
M
M
M
M
M
Dimension drawing
141
Binding dimension drawing.
Drain holes
065
Plugged existing drain holes.
M
M
M
NA
NA
M
076
Draining holes with plugs in open position.
M
M
M
M
M
S
M
M
M
M
M
S
Earthing bolt
067
External earthing bolt.
Heating elements
450
Heating element, 100-120 V.
M
M
M
M
M
M
451
Heating element, 200-240 V.
M
M
M
M
M
M
Insulation systems
014
Winding insulation class H.
P
P
P
P
P
NA
405
Special winding insulation for frequency converter supply.
P
P
P
P
P
NA
*) Certain variant codes cannot be used simultaneously.
20
S
= Included as standard
M = On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
P
= New manufacture only.
R
= On request.
NA = Not applicable
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Code
Variant
1)
Motor size
719080
100
112132
160180
200250
280355
Mounting arrangements
008
IM 2101 foot/flange mounted, from IM 1001(B34 from B3).
M
M
M
M
NA
NA
009
IM 2001 foot/flange mounted, IEC flange, from IM 1001(B35 from B3).
M
M
M
M
M
M
047
IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5).
M
M
M
M
NA
NA
066
Modified for non-standard mounting position (please specify IM xxxx).
(must be ordered for all mounting arrangements excluding IM B3 (1001) and M
B5 (3001).
M
M
NA
NA
M
078
IM 3601 flange mounted, DIN C-flange.
M
M
M
NA
NA
NA
090
IM 2101 foot/flange mounted, DIN C-flange, from IM 1001, (B34 from B3).
M
M
M
NA
NA
NA
M
M
M
M
M
M
Painting
114
Special paint colour, standard grade. RAL-colour no. must be specified.
Protection
005
Metal protective roof, vertical motor, shaft down.
M
M
M
M
M
M
072
Radial seal at D-end.
M
M
M
R
R
M
073
Sealed against oil at D-end.
P
P
P
R
R
M
158
Degree of protection IP65.
M
M
M
M
M
M
211
Weather protected, IP xx W.
M
M
M
M
M
NA
401
Protective roof, horizontal motor.
NA
NA
NA
M
M
R
403
Degree of protection IP56.
M
M
M
M
M
M
Rating & instruction plates
002
Restamping voltage, frequency and output, continuous duty.
M
M
M
M
M
M
095
Restamping output (maintained voltage, frequency), intermittent duty.
M
M
M
M
M
M
135
Mounting of additional identification plate, stainless.
M
M
M
M
M
M
138
Mounting of additional identification plate, aluminum.
M
M
M
M
M
NA
139
Additional identification plate delivered loose.
M
M
M
M
M
M
161
Additional rating plate delivered loose.
M
M
M
M
M
M
M
M
M
M
M
NA
NA
NA
NA
NA
NA
M
Shaft & rotor
070
One or two special shaft extensions, standard shaft material.
Standards and regulations
540
China Energy Label
Stator winding temperature sensors
121
Bimetal detectors, break type (NCC), (3 in series), 130°C, in stator winding.
M
M
M
M
M
M
122
Bimetal detectors, break type (NCC), (3 in series), 150°C, in stator winding.
M
M
M
M
M
M
123
Bimetal detectors, break type (NCC), (3 in series), 170°C, in stator winding.
M
M
M
M
M
M
125
Bimetal detectors, break type (NCC), (2x3 in series), 150°C,
in stator winding.
Bimetal detectors, break type (NCC), (3 in series 130°C & 3 in series,
150°C), in stator winding.
M
M
M
M
M
M
M
M
M
M
M
M
321
Bimetal detectors, closing type (NO), (3 in parallel), 130°C, in stator winding. M
M
M
M
M
M
322
Bimetal detectors, closing type (NO), (3 in parallel), 150°C, in stator winding. M
M
M
M
M
M
323
Bimetal detectors, closing type (NO), (3 in parallel), 170°C, in stator winding. M
M
M
M
M
M
325
Bimetal detectors, closing type (NO), (2x3 in parallel), 150°C,
in stator winding.
M
M
M
M
M
127
*) Certain variant codes cannot be used simultaneously.
S
= Included as standard
M = On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
M
.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
P
= New manufacture only.
R
= On request.
NA = Not applicable
21
Code
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
327
Bimetal detectors, closing type (NO), (3 in parallel,
130°C & 3 in parallel 150°C), in stator winding.
M
M
M
M
M
M
435
PTC-thermistors (3 in series), 130°C, in stator winding.
M
M
M
M
M
M
436
PTC-thermistors (3 in series), 150°C, in stator winding.
S
S
S
S
S
S
437
PTC-thermistors (3 in series), 170°C, in stator winding.
M
M
M
M
M
M
439
PTC-thermistors (2x3 in series), 150°C, in stator winding.
M
M
M
M
M
M
441
PTC-thermistors (3 in series, 150°C & 3 in series, 150°C), in stator winding.
M
M
M
M
M
M
442
PTC-thermistors (3 in series, 150°C & 3 in series, 150°C), in stator winding. M
M
M
M
M
M
445
Pt100 2-wire in stator winding, 1 per phase.
M
M
M
M
M
M
446
Pt100 2-wire in stator winding, 2 per phase.
M
M
M
M
M
M
Terminal box
015
Motor supplied in D-connection.
M
M
M
M
M
NA
017
Motor supplied in Y-connection.
M
M
M
M
M
NA
021
Terminal box LHS, seen from D-end. (= L in product code).
P
P
P
P
P
NA
180
Terminal box RHS, seen from D-end (= R in product code).
P
P
P
P
P
NA
137
Extended cable connection, low terminal box.
R
R
R
R
R
NA
157
Terminal box degree of protection IP 65.
M
M
M
M
M
NA
230
Standard metal cable glands.
M
M
M
M
M
S
231
Standard cable glands with clamping device.
M
M
M
M
M
NA
400
4x90 degrees turnable terminal box.
S
S
S
M
M
NA
418
Separate terminal box forauxiliaries, standard material.
NA
NA
NA
R
R
M
467
Lower than standard terminal box and rubber extended cable, length 2 m
included.
R
R
R
R
R
NA
468
Cable entry from D-end.
M
M
M
M
M
NA
469
Cable entry from N-end.
M
M
M
M
M
NA
731
Two standard metal cable glands.
M
M
M
M
M
S
Testing
140
Test confirmation.
M
M
M
M
M
NA
145
Type test report from a catalogue motor, 400 V 50 Hz.
M
M
M
M
M
M
146
Type test report for one motor from specific delivery batch.
R
R
R
R
R
R
148
Routine test report (only at 400 V 50 Hz).
M
M
M
M
M
M
760
Vibration level test.
M
M
M
M
M
M
762
Noise level test for one motor from specific delivery batch.
R
R
R
NA
NA
R
Variable speed drives
701
Insulated bearing at N-end.
NA
NA
NA
NA
NA
M
704
EMC cable gland.
NA
NA
NA
M
M
M
*) Certain variant codes cannot be used simultaneously.
22
S
= Included as standard
M = On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
P
= New manufacture only.
R
= On request.
NA = Not applicable
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Sizes 71-132
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1011), IM B7 (IM 1061), IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
M000090
Three phase motor, foot-mounted, terminal box top-mounted
Three phase motor, foot-mounted, terminal box on right hand side
Motor
size
Poles
A
AA
AB
AC
AD
B
BB
C
D
DB
E
EG
71M
2-6
112
30
145
145
120
90
110
45
14
M5
30
12.5
80M
2-6
125
35
160
165
145
100
135
50
19
M6
40
16
90S
2-6
140
35
175
180
150
100
140
56
24
M8
50
19
90L
2-6
140
35
175
180
150
125
165
56
24
M8
50
19
100L
2-6
160
40
200
205
175
140
180
63
28
M10
60
22
112M
2-8
190
50
235
225
185
140
190
70
28
M10
60
22
132S
2-8
216
55
270
265
205
140
205
89
38
M12
80
28
132M
2-8
216
55
270
265
205
178
240
89
38
M12
80
28
Motor
size
Poles
F
G
GD
H
HA
HD
HF
K
L
LD
71 M
2-6
5
11
5
71
10
200
-
7
255
100
80 M 2-6
6
15.5
6
80
12
225
170
10
285
116
90 S 2-6
8
20
7
90
12
240
185
10
310
128
90 L 2-6
8
20
7
90
12
240
185
10
335
128
100 L 2-6
8
24
7
100
14
275
245
12
380
144
112 M 2-6
8
24
7
112
15
290
265
12
380
144
132 S 2-6
10
33
8
132
18
335
300
12
465
169
132 M 2-6
10
33
8
132
18
335
300
12
505
169
Tolerances:
A, B, C +, - 0.8
D,DA ISO m6
F, FA ISO h9
H + 0, - 0.5
N ISO j6
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
23
General purpose cast iron motors
Sizes 71-132
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 IM 3001), IM V3 (IM 3031)
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
M000091
Three phase motor, flange- mounted
Three phase motor, flange-mounted, small flange (B14)
IM B5 (IM3001), IM V1 (IM3011), IM V3 (IM3031)
Type
M2QA
Poles AC
AD
D
DB
E
EG
F
G
GD
HE
L
LA
M
N
P
S
T
71M
80M 2-6
2-8
145
165
120
145
14
19
M5
M6
30
40
12.5
16
5
6
11
15.5
5
6
165
200
255
285
9
9
130
165
110
130
160
200
10
12
3.5
3.5
90S 90L
2-8
2-8
180
180
150
150
24
24
M8
M8
50
50
19
19
8
8
20
20
7
7
200
200
310
335
10
10
165
165
130
130
200
200
12
12
3.5
3.5
100L
2-8
205
175
28
M10
60
22
8
24
7
265
380
11
215
180
250
15
4
112M
2-8
225
185
28
M10
60
22
8
24
7
270
395
11
215
180
250
15
4
132S
132M
2-8
2-8
265
265
205
205
38
38
M12
M12
80
80
28
28
10
10
33
33
8
8
320
320
465
505
12
12
265
265
230
230
300
300
15
15
4
4
IM B14 (IM3611), IM V19 (IM3631)
Motor Poles
size
Flange HE
P
M
size
71M 2-6
80M 2-8
90S
2-8
90L
2-8
100L 2-8
112M 2-8
C105
C140
C120
C160
C140
C160
C140
C160
C160
C200
C160
C200
Tolerances:
D,DA ISO m6
F, FA ISO h9
N
ISO j6
24
145
145
165
165
185
185
185
185
255
255
265
265
105
140
120
160
140
160
140
160
160
200
160
200
85
115
100
130
115
130
115
130
130
165
130
165
N
70
95
80
110
95
110
95
110
110
130
110
130
S
T
M6
M8
M6
M8
M8
M8
M8
M8
M8
M10
M8
M10
2.5
3
3
3.5
3
3.5
3
3.5
3.5
3.5
3.5
3.5
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Sizes 71-132
Dimension drawings
Foot- and flange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
M000092
Three phase motor, foot- and flange-mounted, terminal box top-mounted
Three phase motor, foot- and flange-mounted, terminal box on right
Motor
Poles
A
AA
AB
AC
size
AD
71M
80M
90S
90L
100L
112M
132S
132M
120
145
150
150
175
185
205
205
2-6
2-8
2-8
2-8
2-8
2-8
2-8
2-8
112
125
140
140
160
190
216
216
30
35
35
35
40
50
55
55
Motor
Poles
G
GD
size
71M
80M
90S
90L
100L
112M
132S
132M
2-6
2-8
2-8
2-8
2-8
2-8
2-8
4-8
Tolerances:
A, B, C +- 0.8
D,DA ISO m6
F, FA ISO h9
11
15.5
20
20
24
24
33
33
5
6
7
7
7
7
8
8
145
160
175
175
200
235
270
270
145
165
180
180
205
225
265
265
B
BB
C
D
DB
E
EG
90
100
100
125
140
140
140
178
110
135
140
165
180
190
205
240
45
50
56
56
63
70
89
89
14
19
24
24
28
28
38
38
M5
M6
M8
M8
M10
M10
M12
M12
30
40
50
50
60
60
80
80
12.5
16
19
19
22
22
28
28
H
HA
HD
HF
K
L
LA
LD
M
N
P
S
71
80
90
90
100
112
132
132
10
12
12
12
14
15
18
18
200
225
240
240
275
290
335
335
-
170
185
185
245
265
300
300
7
10
10
10
12
12
12
12
255
285
310
335
380
395
465
505
9
9
10
10
11
11
12
12
100
116
128
128
138
144
169
169
130
165
165
165
215
215
265
265
110
130
130
130
180
180
230
230
160
200
200
200
250
250
300
300
10
12
12
12
15
15
15
15
F
5
6
8
8
8
8
10
10
T
3.5
3.5
3.5
3.5
4
4
4
4
H + 0, -0.5
N ISO j6
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
25
General purpose cast iron motors
Sizes 160-250
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
Three phase motor, foot-mounted, terminal box top-mounted
M000093
Three phase motor, foot-mounted, terminal box on right hand side
IEC-frame size 250
Motor
size
Poles
A
AA
AB
AC
AD
B
BB
C
D
DB
E
EG
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
349
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
36
36
36
36
39
39
39
39
39
39
Motor size
Poles
F
G
GD
H
HA
HD
HF
K
L
LD
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
12
12
14
14
16
18
16
18
18
18
47
47
42.5
42.5
49
53
49
53
53
58
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
250
250
270
270
285
340
310
340
360
360
Tolerances:
A, B, C +, - 0.8
D,DA ISO k6 < Ø 50 mm
ISO h9 > Ø 50 mm
26
F, FA ISO h0
H
+ 0, - 0.5
110
110
110
110
110
140
110
140
140
140
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Sizes 160-250
Dimension drawings
M000094
Flange-mounted; IM B5 (IM 3001), IM V1 (IM 3011), IM V3 (IM 3031),
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
Motor
size
Poles AD
D
DB
E
EG
F
G
GD
HE
L
LA
M
N
P
S
T
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
300
300
300
300
350
400
400
400
500
500
250
250
250
250
300
350
350
350
450
450
350
350
350
350
400
450
450
450
550
550
19
19
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
5
5
255
255
270
270
305
335
335
335
395
395
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
12
12
14
14
16
18
16
18
18
18
47
47
42.5
42.5
49
53
49
53
53
53
8
8
9
9
10
11
10
11
11
11
400
400
420
420
470
520
520
520
655
655
600
645
670
710
770
820
815
840
930
930
15
15
18
18
20
20
20
20
22
22
Tolerances:
D,DA ISO k6 < Ø 50 mm
ISO m6 > Ø 50 mm
F, FA ISO h9
N
ISO j6
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
27
General purpose cast iron motors
Sizes 160-250
Dimension drawings
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
Three phase motor, foot-mounted, terminal box top-mounted
M000095
Three phase motor, foot-mounted, terminal box on right hand side
IEC frame size 250
Motor
size
Poles
A
AA
AB
AC
AD
B
BB
C
D
DB
E
EG
F
G
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
349
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
12
12
14
14
16
18
18
18
18
18
47
47
42.5
42.5
49
53
49
53
53
53
Motor size
Poles
GD
H
HA
HD
HF
K
L
LA
LD
M
N
P
S
T
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
15
15
18
18
20
20
20
20
22
22
250
250
270
270
285
340
310
340
360
360
300
300
300
300
350
400
400
400
500
500
250
250
250
250
300
350
350
350
450
450
350
350
350
350
400
450
450
450
550
550
19
19
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
5
5
Tolerances:
A, B, C +, - 0.8
D,DA ISO k6 > Ø 50 mm
ISO m6 > Ø 50 mm
28
F, FA ISO h9
H
+ 0, - 0.5
N
ISO j6
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Sizes 280-355
Dimension drawings
M000096
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
Motor
size
Poles A
AA
AB
AC
B
B '
BA BB
C
CA
CA ' D
DA DB
DC
E
EA
EG
EH
280 SM_2
4-6
457 85
457 85
530 572 368 419 146 506 190 400
530 572 368 419 146 506 190 400
349
349
65
75
60
65
M20
M20
M20 140
M20 140
140 40
140 40
40
40
315 SM_2
4-6
508 100 590 645 406 457 163 556 216 465
508 100 590 645 406 457 163 556 216 465
414
414
65
80
60
75
M20
M20
M20 140
M20 170
140 40
140 40
40
40
315 ML_2
4-6
508 100 590 645 457 508 163 607 216 465
508 100 590 645 457 508 163 607 216 465
414
414
65
90
60
75
M20
M24
M20 140
M20 170
140 40
140 48
40
40
355 _
610 120 700 740 500 -
610 120 700 740 500 -
-
-
70 70
100 90
M20
M24
M20 140
M24 210
140 40
170 48
40
48
2
4-6
161 662 254 460
161 662 254 460
Motor Poles F
FA G
GA GB GC GD GF H
HA
HC HD K
L
LA LC
LD
size
280 SM_2
4-6
18
20
18
18
58 69 53
67.5 79.5 58
315 SM_2
4-6
18
22
18
20
58
71
315 ML_2
4-6
18
25
18
20
58
84
355 S_ 2
4-6
20
28
20
25
Tolerances:
D, DA ISO M6
H
+ 0, - 1.0
11
12
11
11
280 40
280 40
566
566
745 24
745 24
1088
1088
22
22
1238
1238
332 100
332 100
69
85
53 64 11
67.5 79.5 14
11
12
315 50
315 50
638
638
840 30
840 30
1218
1248
25
25
1367
1397
351 115
381 115
69
95
53 64 11
67.5 79.5 14
11
12
315 50
315 50
638
638
840 30
840 30
1269
1299
25
25
1418
1448
351 115
381 115
62.5 74.5 62.5 74.5 12
90 106 81 95 16
12
14
355 55
355 55
725
725
955 35
955 35
1344
1414
25
25
1494
1594
397 130
467 130
1)
2)
64
69
O
1)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
29
General purpose cast iron motors
Sizes 280-355
Dimension drawings
M000097
Flange-mounted; IM B5 (IM 3001), IM V1 IM 3001), IM V3 (IM 3031)
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
Motor
size
Poles
AC
280 SM_
2
4-6
315 SM_
D
DA
DB
DC
E
EA
EG
EH
F
FA
G
572 65
572 75
60
65
M20
M20
M20
M20
140
140
140
140
40
40
40
40
18
20
18
18
2
4-6
645 65
645 80
60
75
M20
M20
M20
M20
140
170
140
140
40
40
40
40
18
22
315 ML_
2
4-6
645 65
645 90
60
75
M20
M24
M20
M20
140
170
140
140
40
48
40
40
355 S_
2
4-6
746 70
645 100
70
90
M20
M24
M20
M24
140
210
140
170
40
48
Motor
Poles HB L
LA LB
LC
LD
M
N
size
GA
GB
GC
GD
GF
58
69
53
67.5 79.5 58
64
69
11
12
11
11
18
20
58
71
69
85
53
67.5
64
11
79.5 14
11
12
18
25
18
20
58
81
69
95
53
67.5
64
11
79.5 14
11
12
40
48
20
28
20
25
62.5 74.5 62.5
90
106 81
74.5 12
95
16
12
14
O
P
S
T
1)
280 SM_
2
4-6
465 1088
465 1088
22
22
938
938
1238
1238
332
332
500
500
450 100
450 100
550
550
18
18
5
5
315 SM_
2
4-6
525 1218
525 1248
25
25
1078
1078
1367
1397
351
381
600
600
550 115
550 115
660
660
23
23
6
6
315 ML_
2
4-6
525 1269
525 1299
25
25
1129
1199
1418
1448
351
381
600
600
550 115
550 115
660
660
23
23
6
6
355 S_
2
4-6
600 1344
600 1414
25
25
1204
1204
1494
1594
397
467
740
740
680 130
680 130
800
800
23
23
6
6
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
30
1)
2)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors
Sizes 280-355
Dimension drawings
M000098
Foot- and flange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
Motor
size
Poles A
AA
AB AC B
B ' BA BB C
CA
CA ' D
DA DB
DC
E
EA
EG
EH
F
FA
280 SM_2
4-6
457 85
457 85
530 572 368 419 146 506 190 400 349 65
530 572 368 419 146 506 190 400 349 75
60
65
M20 M20 140 140 40
M20 M20 140 140 40
40
40
18
20
18
18
315 SM_2
4-6
508 100 590 645 406 457 163 556 216 465 414 65
508 100 590 645 406 457 163 556 216 465 414 80
60
75
M20 M20 140 140 40
M20 M20 170 140 40
40
40
18
22
18
20
315 ML_2
4-6
508 100 590 645 457 508 163 607 216 465 414 65
508 100 590 645 457 508 163 607 216 465 414 90
60
75
M20 M20 140 140 40
M24 M20 170 140 48
40
40
18
25
18
20
355 _
610 120 700 740 500 -
610 120 700 740 500 -
70
90
M20 M20 140 140 40
M24 M24 210 170 48
40
48
20
28
20
25
2
4-6
161 662 254 460 -
161 662 254 460 -
70
100
Motor Poles G GA GB GC GDGF H HA HC HD K
L
LA LC
LD M
N
P
S
size
280 SM_2
4-6
58 69 53
67.5 79.5 58
315 SM_2
4-6
58
71
315 ML_2
4-6
58
84
355 S_ 2
4-6
O
1)
11 11
12 11
280 40
280 40
566 745 24
566 745 24
1088 22
1088 22
1238 332 500 450 550
1238 332 500 450 550
18
18
5
5
100
100
69
85
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638 840 30
638 840 30
1218 25
1248 25
1367 351 600 550 660
1397 381 600 550 660
23
23
6
6
115
115
69
95
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638 840 30
638 840 30
1269 25
1299 25
1418 351 600 550 660
1448 381 600 550 660
23
23
6
6
115
115
62.5 74.5 62.5 74.5 12 12
90 106 81 95 16 14
355 55
355 55
725 955 35
725 955 35
1344 25
1414 25
1494 397 645 740 680
1594 467 715 740 680
23
23
6
6
130
130
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
64
69
T
1)
2)
Cooling distance.
Second shaft end on request.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&generators' or contact us.
31
Rating plates
For motor sizes 71 to 132 the rating plate gives one
current value for the voltage area. That is the highest
current that can occur within the vol­tage area with the
given output.
M000100
Motor sizes 160 to 250
M000099
Motor sizes 71 to 132
For motor sizes 160 to 355 the rating plate is in table
form giving values for speed, current and power factor
for six voltages.
M000101
Motor sizes 280 to 355
32
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Motor construction
1
2
3
4
5
6
13
12
11
10
M000098
9
8
7
1
2
3
4
5
6
7
Endshield, D-end
Terminal box
Rating plate
Rotor
Fan
Fan cover
Terminal box cover
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
8 9 10
11
12
13 Stator
Bolt
Bearing
Wave-shape spring ring
Endshield, N-end
Screw
33
General purpose cast iron motors in brief, basic design
Motor size
71
80
90
100
112
132
Stator
Material
Cast iron HT150 GB5675-85
Paint colour shade
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
160
Paint thickness
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness > 60 mm
Bearing end Material
Cast iron HT150 GB5675-85
shields
Paint colour shade
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
Paint thickness
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness > 60 mm
Bearings
D-end 6202 DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6207
DDU C3
6208
DDUC3
6309
ZZ C3
N-end
6202
DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6206
DDU C3
6207
DDU C3
6209
ZZ C3
Axially-locked
Inner bearing cover
As standard, locked at D-end
bearings
Lubrication
Greased for life. Rating plate
Material
Stainless steel Terminal box
Frame material
Cover material
Cast iron HT150 GB5675-85
Connections
Cable entries
2xM16x1.5 2xM25x1.5 2xM32x1.52xM32x1.5 2xM32x1.5 2xM32x1.5
Terminals
6 terminals for connection
Fan
Material
Reinforced glass fiber Fan cover
Material
Steel
Paint colour shade
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
Paint thickness
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness ≥> 60 mm
Stator winding
Material
Insulation
Copper
Insulation class F
Winding protection
On request
Rotor winding
Material
Pressure die-cast aluminium
Cast iron HT150 GB5675-85
Balancing method
Half key balancing as standard
Key ways
Open key way
Enclosure
IP 55
Cooling method
IC 411
34
2xM40x1.5
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
General purpose cast iron motors in brief, basic design
Motor size
180
Stator
Material
Cast iron HT150 GB5675-85
Paint colour shade
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
Paint thickness
200
225
250
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness > 60 mm
Bearing end shields
Material
Cast iron HT150 GB5675-85
Paint colour shade
280
315
355
Cast iron GG 20/GRS 200
Two-pack epoxy paint, thickness > 70 mm
Cast iron GG 20/GRS 200,
except flange-mounted
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
Paint thickness
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness ≥> 60 mm
Two-pack epoxy paint, thickness
> 70 mm
Bearings
D-end 2 pole
4 to 8 pole 6310 ZZ C3
6312
ZZU C3 6313
6314 C3
ZZ C3
6316/C4
6316/C3
6316/C4
6319/C3
6319M/C3
6322/C3
N-end 2 pole 4 to 8 pole 6210
ZZ C3
6212 ZZ C3
6213
ZZ C3
6316/C4
6316/C3
6316/C4
6316/C3
6319M/C3
6319/C3
6214 C3
Axially-locked
Inner bearing cover
As standard, locked at D-end
bearings
Lubrication
Greased for life or regreasable Rating plate
Material
Regreasable bearings Stainless steel
Acid proof stainless steel
Terminal box
Frame material
Cast iron HT150 GB5675-85
Cast iron GG 15/GRS 150
Cover material
Cast iron HT150 GB5675-85
Cast iron GG 15/GRS 150
Connections
Cable entries
2xM40x1.5 2xM63 + 2xM20
Terminals
6 terminals for connection
Fan
Material
Reinforced glass fiber Fan cover
Material
Steel
Paint colour shade
2xM50x1.5 2xM50x1.5 2xM63x1.5
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G / RAL 5014
Paint thickness
Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness ≥> 60 mm
Stator winding
Material
Copper
Insulation
Insulation class F
Winding protection
On request
Rotor winding
Material
Reinforced glass fiber or aluminium
Two-pack epoxy polyester paint,
thickness ≥> 80 mm
3 PTC thermistors as standard, 150°C
Pressure die-cast aluminium
Balancing method
Half key balancing as standard
Key way
Open key way
Enclosure
IP 55
Cooling method
IC 411
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
IP 55, higher protection on request
35
36
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
37
ABB Motors’ total product offer
M000328
ABB offers several comprehensive ranges of AC motors and generators.
We manufacture synchronous motors for even the most demanding applications,
and a full range of low and high voltage induction motors.
Our in-depth knowledge of virtually every type of industrial processing ensures
we always specify the best solution for your needs.
Low voltage motors and generators
Process performance motors
formore demanding applications
– Cast iron motors
– Premium efficiency motors
– NEMA motors
Industrial performance motors
- flexibility for most customer
applications
– Aluminum motors
– Steel motors
– Cast iron motors
Motors for hazardous areas
– Flameproof motors
– Increased safety motors
– Non-sparking motors
– Dust ignition proof motors
Marine motors
– Aluminum motors
– Steel motors
– Cast iron motors
– Open drip proof motors
Other applications
– Open drip proof motors
– Global motors
– Brake motors
– Single phase motors
– High ambient motors
– Permanent magnet motors
– High speed motors
– Wind turbine generators
– Smoke venting motors
– Water cooled motors
– Motors for roller table drives
– Servomotors
General performance motors
- out-of-the-box simplicity for
highvolume customers
– Aluminum motors
– Cast iron motors
High voltage and synchronous motors
and generators
– High voltage cast iron motors
– Induction modular motors
– Slip ring motors
– Motors for hazardous areas
38
– Synchronous motors and generators
– DC motors and generators
– Wind turbine generators
– Traction motors
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Visit our web site
www.abb.com/motors&generators
Motors & Generators
> Motors
>> Low Voltage Motors
Process performance motors
Industrial performance
motors
>>> General performance
motors
>>>> New aluminum motors
>>>> Aluminum motors
>>>> Cast iron motors
General performance motors
Motors for hazardous areas
Marine motors
Motors for additional
applications
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
39
Low Voltage Motors
Austria
ABB AG
Clemens Holzmeisterstrasse 4
A-1109 Wien
Tel: +43 (0) 1 601 090
Fax: +43 (0) 1 601 09 8305
Belgium
Asea Brown Boveri S.A.-N.V.
Hoge Wei 27
BE-1930 Zaventem
Tel: +32 (0) 2 718 6311
Fax: +32 (0) 2 718 6657
Canada
ABB Inc., BA Electrical Machines
10300 Henri-Bourassa Blvd, West,
Saint-Laurent, Quebec
Canada H4S 1N6
Tel: +1 514 832-6583
Fax: +1 514 332-0609
China*
ABB Shanghai Motors Co., Ltd.
88 Tianning Road
Minhang(Economical and Technological Development Zone)
200245 Shanghai
Tel: +86 21 5472 3133
Fax: +86 21 5472 5025
Chile
Asea Brown Boveri S.A.
P.O.Box 581-3
Santiago
Tel: +56 (0) 2 5447 100
Fax: +56 (0) 2 5447 405
Denmark
ABB A/S
Automation Products
Emil Neckelmanns Vej 14
DK-5220 Odense SØ
Tel: +45 65 47 70 70
Fax: +45 65 47 77 13
Finland*
ABB Oy
Motors
P.O.Box 633
FI-65101 Vaasa
Tel: +358 (0) 10 22 11
Fax: +358 (0) 10 22 47372
www.abb.com/motors&generators
http://online.abb.com/bol
40
France
ABB Entrelec
ZA La Boisse BP 90145
300 Rue des Prés-Seigneurs
FR-01124 Montluel Cedex
Tel: +33 4 37 40 40 00
Fax: +33 4 37 40 40 72
Korea
ABB Korea Ltd.
7-9fl, Oksan Bldg., 157-33
Sungsung-dong, Kangnam-ku
Seoul
Tel: +82 2 528 2329
Fax: +82 2 528 2338
Germany
ABB Automation Products GmbH
Motors & Drives
Wallstaedter Strasse 59
DE-68526 Ladenburg
Tel: +49 (0) 6203 717 717
Fax: + 49 (0) 6203 717 600
Malaysia
ABB Malaysia Sdn. Bhd.
Lot 608, Jalan SS 13/1K
47500 Subang Jaya, Selangor
Tel: +60 3 5628 4888
Fax: +60 3 5631 2926
Hong Kong
ABB (Hong Kong) Ltd.
Tai Po Industrial Estate,
3 Dai Hei Street,
Tai Po, New Territories,
Hong Kong
Tel: +852 2929 3838
Fax: +852 2929 3505
India*
ABB Ltd.
32, Industrial Area, N.I.T
Faridabad 121 001
Tel: +91 (0) 129 502 3001
Fax: +91 (0) 129 502 3006
Indonesia
PT. ABB Sakti Industri
JL. Gajah Tunggal Km.1
Jatiuwung, Tangerang 15136
Banten, Indonesia
Tel: + 62 21 590 9955
Fax: + 62 21 590 0115 - 6
Ireland
Asea Brown Boveri Ltd
Components Division
Belgard Road
Tallaght, Dublin 24
Tel: +353 (0) 1 405 7300
Fax: +353 (0) 1 405 7327
Italy*
ABB SACE SpA
LV Motors
Via dell' Industria 18
IT-20010 Vittuone, Milano
Tel: +39 02 90341
Fax: +39 02 9034 7289
Japan
ABB K.K.
26-1 Cerulean Tower
Sakuragaoka-cho, Shibuya-ku
Tokyo 150-8512
Tel: +81 (0) 3 578 46251
Fax: +81 (0) 3 578 46260
Mexico
ABB México, S.A. de C.V.
Apartado Postal 111
CP 54000 Tlalnepantla
Edo. de México, México
Tel: +52 5 328 1400
Fax: +52 5 390 3720
The Netherlands
ABB B.V.
Dept. LV motors (APP2R)
P.O.Box 301
NL-3000 AH Rotterdam
Tel: +31 (0) 10 4078 879
Fax: +31 (0) 10 4078 345
Norway
ABB AS
P.O.Box 154 Vollebekk
NO-0520 Oslo
Tel: +47 22 872 000
Fax: +47 22 872 541
Russia
ABB Industrial & Building Systems
Ltd.
Business Centre "Krugozor"
Obrucheva 30/1, Building 2
Moscow 117861
Tel: +7 495 960 2200, 956 93 93
Fax: +7 495 960 2209, 230 63 46
Singapore
ABB Industry Pte Ltd
2 Ayer Rajah Crescent
Singapore 139935
Tel: +65 6776 5711
Fax: +65 6778 0222
Spain*
Asea Brown Boveri S.A.
Automation Products - Fábrica
Motores
P.O.Box 81
ES-08200 Sabadell
Tel: +34 93 728 8500
Fax: +34 93 728 8741
Sweden*
ABB AB
LV Motors
SE-721 70 Västerås
Tel: +46 (0) 21 329 000
Fax: +46 (0) 21 329 140
Switzerland
ABB Schweiz AG
Normelec/CMC Components
Motors&Drives
Badenerstrasse 790
Postfach
CH-8048 Zürich
Tel: +41 (0) 58 586 0000
Fax: +41 (0) 58 586 0603
Taiwan
ABB Ltd.
6F, No. 126, Nanking East Road,
Section 4i
Taipei, 105 Taiwan, R.O.C.
Tel: +886 (0) 2 2577 6090
Fax: +886 (0) 2 2577 9467
Thailand
ABB Limited (Thailand)
161/1 SG Tower,
Soi Mahadlekluang 3,
Rajdamri, Bangkok 10330
Tel: +66 2 665 1000
Fax: +66 2 665 1042
The United Kingdom
ABB Ltd
Drives, Motors and Machines
Daresbury Park
Daresbury, Warrington
Cheshire, WA4 4BT
Tel: +44 (0) 1925 741 111
Fax: +44 (0) 1925 741 212
USA
ABB Inc.
Low Voltage Motors
16250 W. Glendale Drive
New Berlin, WI 53151
Tel: +1 262 785 3200
Fax: +1 262 780 8888
Venezuela
Asea Brown Boveri S.A.
P.O.Box 6649
Carmelitas,
Caracas 1010A
Tel: +58 (0) 2 238 2422
Fax: +58 (0) 2 239 6383
9AKK104633 EN 02-2009
Australia
ABB Australia Pty Ltd
601 Blackburn Road
Notting Hill VIC 3168
Tel: +61 (0) 8544 0000
Fax: +61 (0) 8544 0001
Printed in Finland, 02-2009, Waasa Graphics
Manufacturing sites (*) and some of the larger sales companies.
ABB LV Motors / Low Voltage General Purpose Cast Iron Motors EN 02-2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement