Advertisement
Advertisement
BeoCenter 6 – 23
Guide
3507791_0604UK UG BeoCenter 6-23.indd 1 05/04/06 14:15:36
3507791_0604UK UG BeoCenter 6-23.indd 2
The Guide and the Reference book
This Guide contains information about the daily use of your Bang & Olufsen product. The Reference book contains information about more advanced operation as well as connecting and operating external equipment, it also provides you with an overview of on-screen menus.
We expect your Bang & Olufsen retailer to deliver, install and set up your products.
However, the information required to install and set them up is included in the
Reference book. This is useful if you move your products or expand your system at a later date.
Index …
The Reference book also contains an index which refers to this Guide and the
Reference book. It can help you find the specific subject you want to know more about.
An explanation of symbols in the Guide and
Reference book
Buttons on the Beo4 remote control
Display on the Beo4 remote control
Display on the television
TV
LIST
FORMAT
VOL 26
05/04/06 14:15:37
3507791_0604UK UG BeoCenter 6-23.indd 3
Contents
Introducing your Bang & Olufsen television and Beo4, 4
Find out how to use the Beo4 remote control and bring up the menus on the screen.
Watch TV, 6
Find out how to operate the daily functions of your television.
Adjust sound and picture, 8
How to adjust volume and change sound mode.
Teletext, 10
How to use the teletext functions of your television, for example MEMO pages.
Use Groups, 12
How to use the Groups function in your television and create groups of favourite programs.
Use the radio, 14
How to use the built-in radio.
The pincode system, 16
How to utilise the pincode system of your television.
Maintenance, 18
How to clean your television and change batteries in the Beo4 remote control.
3
05/04/06 14:15:37
4
The Beo4 remote control gives you access to all functions. When a function is in use, you are informed via displays on Beo4 or on the television.
Introducing your television and Beo4
For information about how to operate connected equipment, refer to the Guide enclosed with it.
For information on how to add extra functions to those shown in the Beo4 display, refer to the chapter ‘Customise Beo4’ In the Reference book.
Switch on the television
Switch on a connected set-top box, registered as
STB(DTV)
Select programs or teletext pages. Enter data in on-screen menus
Enter information in on-screen menus.
Press or while TV or radio is on to select a program Group you have created
Accept and store instructions or settings. Press and hold to call up a program list
Step up or down through programs or menu items
TV
DTV
0 – 9
GO
TV LIGHT RADIO
DTV DVD CD
V MEM RECORD A MEM
1
TEXT
7
4
2
0
8
5
9
6
3
MENU
GO
Reveal additional functions in the Beo4 display, such as FORMAT
LIST
LIST
STOP
EXIT
TV
FORMAT
The Beo4 display shows the source you have selected, or extra functions available when you press the LIST button
RADIO
MENU
Switch on the radio
Bring up the main menu
TEXT
EXIT
•
Switch on teletext
Adjust sound volume: press in the middle to mute the sound
Exit all on-screen menus
Switch the television to standby
3507791_0604UK UG BeoCenter 6-23.indd 4 05/04/06 14:15:37
Displayed information and menus
Information about the selected source is shown in the display. On-screen menus allow you to adjust settings.
Menu name
Menu options
Option contents
Information field
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
EDIT PROGRAM
ADD PROGRAM
AUTO TUNING
TV TUNING
EDIT PROGRAMS
ADD PROGRAM
AUTO TUNING
MANUAL TUNING
LINK FREQUENCY
1 DR1
2 TV2
3 . . . . . . . .
select GO select GO
Examples of on-screen menus. As you highlight menu options, the contents of each option appear in grey below the options.
How to use on-screen menus …
Press to switch on the television TV
Press to bring up the TV SETUP menu
MENU
Press to move between the different menu options
Press to reveal different settings
Press to bring up a menu or store a setting you have made
GO
Press to step back through previous menus
STOP
Press to exit all menus EXIT
TV
5
3507791_0604UK UG BeoCenter 6-23.indd 5 05/04/06 14:15:38
6
Watch TV
This chapter describes daily use of your television: how to switch the television on, choose a program and switch the television off.
In addition, it describes two functions that make watching TV easier and more enjoyable:
– The TV list gives you an overview of all your programs, and you can also view a list of programs you have placed in a Group;
– If your television is equipped with an optional motorised stand, you can turn the television.
For further information about Groups, refer to the chapter ‘Use Groups’ on page 12.
Select a TV program
When you switch the television on, the last program viewed appears on the screen.
Press to switch on the television TV
Press a program number to go directly to that program
Press to change programs one by one
0 – 9
Press to switch the television to standby
•
Pressing 0 swaps between the current TV program and previous TV program.
Bring up a TV list
All your TV programs appear on a list, which you can bring up on the screen. The list contains program numbers and names, and can contain up to 99 TV programs. You can also bring up a program list for Groups of programs.
Press to switch on the television TV
Press and hold to bring up a TV list on the screen
GO
Press or to step between
‘pages’ in the program list
To select a program, enter the program number, or …
0 – 9
… press until the desired program is highlighted
Press to switch on the chosen program, or …
… press to leave the menu
Press or repeatedly to step through your Groups
Press to bring up the chosen
Group
GO
EXIT
Bring up the program list for a specific Group …
Press to switch on the television TV
GO
Press and hold to bring up the program list for this Group
Press or to see the program lists for the other Groups
GO
3507791_0604UK UG BeoCenter 6-23.indd 6
NOTE! If the screen is overheated, black spots may appear in the picture. These spots disappear again, once the television cools down to normal temperature.
05/04/06 14:15:39
Turn the television
TV PROGRAM LIST
1 DR2
2 TV2
3 . . . . . . . .
4 EUROSPRT
5 ZDF
6 RTL7
7 . . . . . . . .
8 BBC
9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 CNN
13 N3
14 . . . . . . . .
15 SAT 1
16 SVT 2
17 NRK
18 TV4 more select GO
If you have a motorised stand, you can turn the television using your Beo4 remote control.
Press repeatedly to display
STAND on Beo4
Press to turn the television to the left or the right, or …
… press the number buttons to choose a pre-defined position; 1 represents the far left position, 9 represents the far right position
The program list for TV is now called up. It provides you with an overview of all your available
TV programs.
For further information about how to preset positions for TV viewing, refer to the chapter ‘Set positions for the television to turn to’ on page 22 in the
Reference book.
LIST
STAND
1 – 9
NEWS
The television can also tilt up and down while on a motorised stand or the wall bracket, but you can only tilt the television manually.
DR1
DR2
TV2
BBC
CNN
ZDF
RTL7
EUROSPRT group select GO
Group list … Programs selected for a Group also appear in the program lists for all tuned programs.
7
3507791_0604UK UG BeoCenter 6-23.indd 7 05/04/06 14:15:40
8
Adjust sound and picture
Several sound adjustment possibilities are available in your television.
You can adjust the volume or mute the sound completely at any time.
If programs are broadcasted with different sound types or languages, you can choose between the sound types or languages.
Your television always ensures you the best possible picture. It automatically adapts the picture so that it fills out as much of the screen as possible. However, you can always choose the format you prefer.
Adjust volume or mute the sound
You can adjust volume or mute the sound at any time.
Press either end of the button to adjust the volume up or down
Press in the middle of the button to mute the sound
Press either end of the button to bring the sound back
Prolonged listening at high volume levels can cause hearing damage!
Sound type or language
While you are watching TV, you can switch between the types of sound that are available.
Press repeatedly to display
SOUND* on Beo4
Press to bring up the current sound type in the display
LIST
GO
SOUND
Press GO repeatedly to switch to another sound type or language in a multi-language programme
GO
Press to leave the SOUND function
You can store your favourite sound type when tuning in your TV channels. For further information, refer to the chapter ‘Edit tuned programs’ on page 15 in the
Reference book.
EXIT
3507791_0604UK UG BeoCenter 6-23.indd 8
*NOTE! In order to display SOUND on Beo4, you must first add it to the Beo4 list of functions. Refer to the chapter ‘Customise Beo4’ on page 52 in the
Reference book.
05/04/06 14:15:40
Speaker balance or combination
If you connect loudspeakers to your television, you can adjust speaker balance and change the speaker combination at any time.
Picture format
When you select a format yourself, the automatic format selection is deactivated, until you switch to a different channel or change source.
Press repeatedly to display
SPEAKER on Beo4
Press to adjust balance between the left and right speakers
Press to select a speaker combination
LIST
SPEAKER
1 – 3
Press repeatedly to display
FORMAT on Beo4
LIST
FORMAT
Press if you want to optimise the picture, or …
GO
… press the number of the desired picture format
1 – 3
Press to remove SPEAKER from the Beo4 display and return to the source you were using
Speaker combinations
SPEAKER 1
Sound in the television speakers only.
SPEAKER 2
Stereo sound in the two external front speakers.
SPEAKER 3
Sound in the television speakers and the two external front speakers.
EXIT
For information about how to preset a speaker combination, refer to the chapter ‘Adjust picture and sound settings’ on page 24 in the Reference book.
If you have chosen Format 1 …
Press or to select variations of this format
If you have chosen Format 1* or Format 2 …
Press or to move the picture up and down
Press to leave the FORMAT function
*Pictures in 4:3 format cannot be moved up and down.
EXIT
Picture formats to choose from
FORMAT 1 … For standard TV pictures. Three variations are available: 4:3, 15:9 and Panoramic view (for the largest picture).
FORMAT 2 … For letter-box pictures. When you select FORMAT 2, the picture is automatically adjusted vertically. This ensures that program names or subtitles – if these appear in the broadcasted picture – can be seen.
FORMAT 3 … For genuine 16:9 wide-screen pictures. FORMAT 3 is usually selected automatically. If this is not the case, you can select it yourself.
9
3507791_0604UK UG BeoCenter 6-23.indd 9 05/04/06 14:15:40
10
Teletext
If you select a program and the broadcaster offers a teletext service, the television gives you access to teletext pages and any subpages linked to the pages.
The arrow buttons on Beo4 and the menu bar at the top of the screen, help you move to the page you want.
When you get there, you can pause the turning of subpages to read them at your own pace.
The television can remember your favourite pages, reveal hidden messages or help you switch to another program’s teletext service. To make your favourite teletext pages appear first when you bring up teletext, store them as MEMO pages.
Basic teletext functions
Navigate through teletext pages by using the menu bar at the top of the teletext page.
PAGE PROGRAM HALT
P100 BBC S100
REC SETUP REVEAL
Wed 13 Oct 12:39:34
PAGE PROGRAM HALT REC SETUP REVEAL
P100 BBC S100 Wed 13 Oct 12:39:34
> Press TEXT to gain access to teletext and EXIT to leave teletext.
To move to a new page …
> Enter the number of the page you wish to see, or …
> … press to move the highlighted cursor to
PAGE.
> Press or to step between pages, and hold to step faster.
> Pressing GO steps to index pages (100, 200,
300 …).
To move to another teletext service …
> Press to move the highlighted cursor to
PROGRAM.
If MEMO pages have been created, MEMO is highlighted when you switch on teletext. Press
or while MEMO is highlighted to find
PROGRAM.
> Press GO to bring up a program list.
> Press or to find a desired program.
> Press GO to switch to another teletext service.
To stop subpages from turning …
> Press STOP to stop subpages from turning, or …
> … move the cursor to HALT and press GO. HALT is replaced by a set of four digits.
> Use and to step to the subpage you wish to see, or …
> … enter its number using the number buttons on Beo4.
> Press GO to restart page turning.
To reveal hidden messages and the like …
> Press to move the highlighted cursor to
REVEAL.
> Press GO to reveal hidden text on the current page.
3507791_0604UK UG BeoCenter 6-23.indd 10
NOTE! If your television is linked via a BeoLink cable to another television, stored MEMO pages are not shared among these televisions. MEMO pages must be stored manually on each linked television.
05/04/06 14:15:41
Store favourite teletext pages Day-to-day use of MEMO pages
Nine MEMO pages are available for each television program’s teletext service.
You may wish to refer to your teletext MEMO pages quickly, for example, if you are leaving for work and wish to check traffic information on a teletext service. To create a MEMO page …
> Bring up a page you view often.
> Press or to move the cursor along the menu bar to SETUP and press GO. The 9 available
MEMO slots are shown by number. The first is highlighted.
> Press GO to store the current page. The cursor moves to the next available MEMO slot.
> Use the number buttons on Beo4 to select the next teletext page you wish to store.
> Repeat the procedure for each page you wish to store.
> To leave the MEMO setup, press or to move the cursor to BACK and press GO.
> Press EXIT to leave teletext.
To view MEMO pages …
> Press TEXT to bring up teletext.
> Press or to move between MEMO pages.
> Press EXIT to leave teletext.
To delete a MEMO page …
> Press or to move the cursor to SETUP and press GO.
> Move the cursor to the MEMO page you wish to delete and press the yellow button.
> Press the yellow button again to confirm.
To see teletext subtitles …
If you would like available teletext subtitles to appear automatically for a particular program, store the teletext subtitles page as MEMO page 9.
PAGE MEMO1
P100 BBC
HALT REC SETUP REVEAL
S100 Wed 13 Oct
PAGE MEMO2
12:39:34
HALT REC SETUP REVEAL
P100 BBC S100 Wed 13 Oct 12:39:34
11
3507791_0604UK UG BeoCenter 6-23.indd 11 05/04/06 14:15:42
12
Use Groups
If you have stored a lot of television and radio programs and want to get to your favourites quickly without going through the list each time, place them in a Group. You no longer need to step through programs you do not use.
Name the Groups after the people who use them – ‘Dad’ or ‘Mary’ – or according to the types of programs included, like ‘News’ or ‘Sports’.
When you have created and selected a particular Group, you only step through the TV and radio programs belonging to this particular Group.
Switch to a different Group to watch a different set of programs or switch from GROUPS to TV to see all the tuned TV programs.
When you switch from a TV program to a radio program in a group, the screen will switch off and show your chosen radio display.
Select programs in a Group
You can gain access to your Groups by activating Groups mode. Press the arrow buttons to select the Group you are looking for, then step through the programs in this
Group.
Press to switch on the television, or …
TV
… press to switch on the radio RADIO
Move left or right until your
Groups are displayed
When you find the Group you want, press GO to select it
GO
Step up or down through the programs in that particular
Group
Use the number buttons to enter the number of the program you want to see
0 – 9
Move left or right to switch to another Group – and press GO to bring it up
To bring up a program list for the current Group, press and hold
GO in Groups mode. To select all available TV programs, press TV.
GO
Create Groups
You can create up to eight different Groups.
Each Group can contain up to 18 programs.
The same program can be stored in more than one Group.
> Press TV to switch on the television, or RADIO to switch on the radio.
> Press MENU to bring up the SETUP menu,
PROGRAM GROUPS is already highlighted.
> Press GO to bring up the PROGRAM GROUPS menu.
> Press to move the cursor to an empty Group and press the green button to be able to name a new Group.
> Press or to select characters.
> Press or to move to the previous or next character space.
> Press GO to store the name, and press GO again to be able to copy programs into the new
Group.
> Press or to find a program you wish to copy to the new Group.
> Press to copy a TV program to your Group.
> Press GO to store your Group when you have finished copying programs.
> Press STOP to back up through previous menus or press EXIT to exit all menus.
3507791_0604UK UG BeoCenter 6-23.indd 12 05/04/06 14:15:42
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
. . .
. . .
. . .
select GO
GROUP1
. . .
. . .
. . .
PROGRAM GROUPS
PROGRAM GROUPS name move new group create group GO
A character next accept
GO
PROGRAM GROUPS
MY GROUP
. . .
name move create
GO
COPY TV
1 DR2
2 TV2
3 . . . . . . . .
4 EUROSPORT
5 ZDF
6 ARD
TO MY GROUP
DR2
SKY NEWS
ZDF
RADIO 2
BBC
15 SAT 1
16 SVT 2
17 NRK
18 TV4 copy accept
GO
Move programs within a Group
You can rearrange the order in which your programs appear within a Group and delete programs in a Group.
> Press TV to switch on the television, or RADIO to switch on the radio.
> Press MENU to bring up the SETUP menu
PROGRAM GROUPS is already highlighted.
> Press GO to bring up the PROGRAM GROUPS menu.
> Press to highlight a Group and press GO to select it.
> Press to highlight the program you wish to move or delete.
> Press to move the program out of the list and press or to move it to the new position.
> Press to move the program back into the list, or press the yellow button to delete it. When you delete a program in the list, the remaining programs contract.
> If the program changed places with another program, then move this program to a new position.
> When you finish moving or deleting programs in a Group, press GO to store the Group.
> Press STOP to back up through previous menus or press EXIT to exit all menus.
DR1
DR2
TV2
BBC
CNN
ZDF
RTL7
EUROSPRT group
NEWS select GO
13
3507791_0604UK UG BeoCenter 6-23.indd 13 05/04/06 14:15:43
14
Use the radio
The television tunes in available radio programs automatically when it is installed for the first time.
If your television is equipped with the optional DAB module, DAB programs are tuned in automatically during the first-time setup.
Once the programs are tuned in, you can either activate the radio and step through the tuned programs, key in the number of the program you want, or you can bring the entire list up on the screen and find the desired program there.
If you have created program Groups you can also call up program lists for your Groups.
Listen to tuned programs
To activate the built-in radio, choose RADIO as your source. The last program you listened to is switched on automatically.
See list of all programs
Choose RADIO as your source and call up a program list to get a complete overview of the available radio programs.
Press to switch on the radio
Step up or down through the available tuned programs, or …
… press the number of the program you want to listen to
RADIO
0 – 9
Press to see the name or number of the current program
GO
Press to swap between the current and previous radio programs
0
Press another source button, such as TV to switch to television channels
TV
Press to switch on the radio RADIO
Press and hold to bring up a radio program list on the screen
GO
Press or to step between
‘pages’ in the program list
To select a program, enter the program number, or …
… press until the desired program is highlighted
0 – 9
Press to switch on the chosen program, or …
… press to leave the menu
GO
EXIT
3507791_0604UK UG BeoCenter 6-23.indd 14
NOTE! For more information about how to tune in additional programs, refer to the chapter ‘Re-tune
or add programs’ on page 20 in the Reference book.
05/04/06 14:15:43
Bring up the program list for a specific Group …
Press to switch on the radio RADIO
Press or repeatedly to step through your Groups
Press to bring up the chosen
Group
GO
Press and hold to bring up the program list for this Group
Press or to see the program lists for the other Groups
GO
RADIO PROGRAM LIST
1 P1
2 P2
3 P3
4 P4
5 STRUER
6 MVEST
7 . . . . . . . .
8 . . . . . . . .
9 BBC1
10 . . . . . . . .
11 SR1
12 SR2
13 SR3
14 . . . . . . . .
15 VIBORG
16 NRK1
17 NRK2
18 NRK3 more select GO
GERNO VERSI FOLLOW EPIUM
RADIO 3
BBC CLASSIC
BBC National DAB
The program list for radio is now called up. It provides you with an overview of all your available radio programs. Tuned DAB programs appear together with FM programs in the list.
During first-time setup your are prompted to choose the radio display setting, you prefer. Your choice determines what is shown on the screen when you listen to radio.
P1
P2
P3
RADIO MW
NRK
BBC
SR1
MY RADIO group select GO
Group list … Programs selected for a Group also appear in the program lists for all tuned programs.
15
3507791_0604UK UG BeoCenter 6-23.indd 15 05/04/06 14:15:45
16
The pincode system
The pincode system is intended to make normal use of your television impossible for someone who does not know the pincode. You choose whether or not to activate the pincode system.
When the pincode system is activated and the television has been disconnected from the mains for 15–30 minutes, the pincode system goes into effect.
When reconnected and switched on, the television automatically switches itself off after four minutes. Entering the pincode returns the television to normal.
Activate the pincode system
Bring up the TV SETUP menu on the screen, activate the PINCODE menu and choose from the submenus. If you wish to deactivate the pincode system, you can do so by deleting your pincode.
To activate the pincode system …
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE menu appears on the screen.
> Use the number buttons or on Beo4 to enter the four digits of your code. Press to go back to digits you wish to correct and use or
to change them.
> Press GO after the last digit is found.
> Re-enter your code to confirm it and press GO again. If the two codes are not identical, the input fields are cleared and you must enter the code again.
PINCODE
PINCODE
CONFIRM PINCODE
0 . . .
. . . .
next accept
GO
If you inadvertently press a wrong button while entering a code, press STOP. The entry is
cancelled and the input fields are cleared.
To change or delete your pincode …
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE menu appears on the screen.
> Enter the correct pincode and press GO.
DELETE PINCODE is highlighted.
> To delete your code, press GO.
> To change your code, press to highlight
NEW PINCODE and press GO. Enter the new code using the number buttons or and press GO. Re-enter the new code to confirm it.
PINCODE
DELETE PINCODE
NEW PINCODE select GO
3507791_0604UK UG BeoCenter 6-23.indd 16
NOTE! If you change your pincode more than five times within a three-hour period, the PINCODE menu becomes inaccessible for three hours, assuming the system remains on during this time.
Switching off the system lengthens the delay.
05/04/06 14:15:46
Use your pincode
If your television has been disconnected from the mains for 15–30 minutes, the television prompts you for the pincode when you switch it on. You may not be able to switch the television on immediately – wait approximately 30 seconds and try again.
When your television is switched on …
> Enter the code digits using the number buttons or .
> Press GO when the last digit is entered.
> Your television starts up again.
IMPORTANT! If you are prompted for a pincode the first time you switch on your television, contact your Bang & Olufsen retailer.
Five incorrect entries will cause the television to shut down for three hours, during which operation is not possible.
If you have forgotten your pincode …
> Contact a Bang & Olufsen retailer to receive a five-digit mastercode.
> When the television prompts you for your pincode, press and hold to bring up the
MASTERCODE menu.
> Entering the code digits using the number buttons or and pressing GO will deactivate your pincode and reactivate your television.
To use the pincode system again …
> Follow the procedure for activating the pincode system.
PINCODE
PINCODE
0 . . .
next accept GO
MASTERCODE
MASTERCODE 0 . . . .
next accept GO
17
NOTE! Should you lose or forget your code, contact your Bang & Olufsen retailer. Your retailer can provide you with a mastercode, which disables your pincode.
3507791_0604UK UG BeoCenter 6-23.indd 17 05/04/06 14:15:47
18
Maintenance
Regular maintenance, such as cleaning the television, is the responsibility of the user. To achieve the best result, follow the instructions to the right.
Contact your Bang & Olufsen retailer to determine recommendations for regular maintenance.
Cleaning
Never use alcohol or other solvents to clean any part of the television, stand or wall bracket!
2
1
Cabinet surfaces
Wipe dust off the surfaces using a dry, soft cloth.
Remove grease stains or persistent dirt with a soft, lint-free, firmly wrung cloth, dipped in a solution of water containing only a few drops of mild detergent, such as washing-up liquid.
3
The speaker cover may also be cleaned with a vacuum cleaner, set to the lowest level.
2
Anti-reflex coated screen …
To clean the picture screen, use a mild window cleaning fluid (not containing alcohol). To retain the optimum performance of the screen, make sure that no streaks or traces of the cleaning fluid are left on the screen.
1
Beo4
Wipe the Beo4 remote control with a soft, lint-free, firmly wrung cloth.
The Beo4 requires three batteries. We recommend that you use Alkaline batteries only (1.5 V – size
AAA). Replace the batteries as shown on this page. Keep a finger on top of the batteries until the lid is replaced.
Changing the Beo4 batteries
When BATTERY appears in the Beo4 display, it is time to change the batteries in the remote control.
When you have replaced the batteries, wait about
10 seconds until TV appears in the display. The
Beo4 remote control is then ready for use.
Do not expose batteries to excessive heat such as sunshine, fire or the like!
3507791_0604UK UG BeoCenter 6-23.indd 18
NOTE! If the front screen glass should crack or chip, or if it should be damaged in any way, it must be replaced immediately, as it could otherwise cause injury. You can order replacement front screen glass from your Bang & Olufsen retailer.
05/04/06 14:15:47
For your information …
Your needs as a user are given careful consideration during the design and development process of a Bang & Olufsen product and we strive to make our products easy and comfortable to operate.
Therefore, we hope that you will take the time to tell us about your experiences with your Bang & Olufsen product. Anything which you consider important – positive or negative – may help us in our efforts to refine our products.
Thank you!
Write to: Bang & Olufsen a/s
Customer Service
Peter Bangs Vej 15
DK–7600 Struer
or call/fax: Bang & Olufsen
Customer Service
+45 96 84 45 25 (phone)
+45 97 85 39 11 (fax)
or email via: www.bang-olufsen.com
19
3507791_0604UK UG BeoCenter 6-23.indd 19
Technical specifications, features and the use thereof are subject to change without notice.
3507791 0604
Printed in Denmark by Bogtrykkergården a-s, Struer
05/04/06 14:15:47
www.bang-olufsen.com
3507791_0604UK UG BeoCenter 6-23.indd 20 05/04/06 14:15:47
Public link updated
The public link to your chat has been updated.
Advertisement