New Products Catalogue (Download PDF)

New Products Catalogue (Download PDF)
NEW
Products
Table of Contents
LPEX Series....................................... 3
HZM Series........................................ 8
Triangular Extruded Aluminum Exit Sign
Battery Unit for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Premier Series................................. 4
TM
Thermoplastic Combination Unit
ESLNX Series .................................... 9
LPEXHZ Series................................... 5
LED Exit Sign for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Battery Unit
6, 12 and 24 volts, NEMA-4X
EF41 Series..................................... 10
EXHZ Series ...................................... 6
Combination Unit for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Remote Fixture for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
EF25 Series..................................... 11
Weatherproof Remote Fixture
Lux-Ray Series ................................ 7
TM
FlexPole Model PS & PD.................. 12
With white LED normally-on option
Compact, Efficient and Flexible
New White LED Option .................... 13
Battery and Remote Units
2
Project/Location:
Contractor:
LPEX Series
Date:
Prepared by:
Triangular Extruded Aluminum Exit Sign
Features
Typical Specification
Supply and install the Emergi-Lite LPEX Series of three-face LED exit signs. The equipment shall operate with
universal AC input voltage of 120, 277 or 347Vac at less than 2 Watts and universal two-wire DC input voltage from
6Vdc to 24Vdc at less than 3.5 Watts. The housing shall be constructed of rugged extruded Aluminum painted with a
factory white finish and shall have three face plates oriented symmetrically at 120 degrees in the horizontal plan.
The faceplates shall be constructed of extruded Aluminum and come standard with knockout chevrons. The light
source shall be red light emitting diodes (LED) of long-life technology ALINGAP. An LED-sensitive diffuser shall be
mounted behind the legend to provide the 6” high by ¾” stroke letters with even illumination. Each legend shall be
illuminated by one dedicated LED lamp (strip). The LED lamps shall be oriented: two downwards and one upwards
and shall provide illumination in normal and emergency operation. Eventual failure of one LED lamp shall not affect
the well-functioning of the other two lamps. The Exit sign shall come standard with a pendant kit with a 3/8-in
diameter pipe for ceiling-mount installation.
Rugged extruded aluminum housing
Extruded aluminum faceplates
White finish standard
Standard field-selectable knockout chevrons
Long life, energy efficient LED light source
ALLinGaP technology LED
CSA certified, meets or exceeds C860 requirements
The exit sign shall be C860 approved.
The equipment shall be Emergi-Lite model: ________________________________.
Made in Canada
Dimensions
13.1”
13.10
[33.3cm]
13.1”
13.10
[33.3cm]
13.1”
13.10
[33.3cm]
7.77”
7.77
[19.7cm]
Power Consumption and Unit Rating
Model
AC / DC standard
AC Specs
120 / 277 / 347Vac
DC Specs
Less than 2W
6 to 24Vdc
Less than 3.5W
Ordering Information
Series
LPEX= EXIT Extruded Alum.
Mounting/Faces
55= 2 sided face (Wall mounting only)
56= 3 sided face (Pendant mounting only)
Colour
W= factory white
Voltage
-U= 120/277/347Vac, 6 to 24Vdc
Options
TP= tamper proof screws
990.0119-E= tamper proof bit*
*One bit per order.
Sold separately
EXAMPLE: LPEX55W-U
3
Project/Location:
Contractor:
TM
Premier Series
Date:
Prepared by:
Thermoplastic Combination Unit
Features
Typical Specification
TM
TM
The Premier Series of combination units (unit equipment
with an exit sign) are designed with aesthetics, ease of
installation and performance in mind.
One-pack combination of battery unit and exit sign, a
compact and contemporary design
Durable injection-molded thermoplastic housing with
push-to-snap design
Available in single or double face configurations both with
means for ceiling mounting
Comes with the Emergi-Light Premier EZ2 canopy
and field-selectable snap chevrons for quick and
easy installation
TM
Exit sign module illuminated by long-life ALINGAP red LEDs
Two MR16 halogen lamps, shielded by a clear
polycarbonate cover
Optional MR16 LED lamps with life expectancy
50,000+ hours
Supply and install the Premier Series combination of unit equipment and exit sign. The standard equipment shall operate
with a dual voltage input of 120/347VAC. The unit shall be suitable for wall or ceiling mount. The unit frame and face plates
shall be made of injection-molded durable high-impact thermoplastic and come standard with snap in/out chevrons. No
screws are necessary to hold the faceplate or backplate to the housing. The one piece thermoplastic frame is molded in white
(optional black). The faceplates shall feature a uniformly illuminated legend. The light source shall be light emitting diodes
(LED) and shall provide illumination in normal and emergency operation and shall be mounted inside the combination housing.
Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend to provide the 6” high
by 3/4” stroke letters with even illumination. The unit shall be equipped with two emergency heads with tool-less adjustable
swivels (lamps of 12W or less) and long-life MR-16 halogen lamps of ___ V and ___ W. Each lamp shall be protected by a
snap-on, shock-absorbent, transparent polycarbonate cover.
The unit shall be equipped with a test switch and a green pilot light, located on the face plate above the EXIT legend. The
battery charger shall be driven by a micro-controller. All electronic circuitry (charger, LED driver, LED’s) shall be installed on a
single printed circuit board PCB. The unit equipped with self-testing / self-diagnostic features shall automatically self test for
one minute every 30 days, 10 minutes in the 6th month and 30 minutes annually. When a fault is detected, the bi-color pilotlight shall turn from green to red and shall flash, identifying the source of the failure: battery, charger circuitry, lamp load, LED
strip. The exit sign module shall be CSA-C860 approved.
The combo unit shall be Emergi-Lite model: ______________________________.
Dimensions
Sealed, maintenance-free, Lead-Calcium or
Nickel-Metal-Hydride batteries
47⁄8” (12.3 cm)
Remote load capacity, up to 92Watts
123⁄8” (31.5 cm)
Optional advanced diagnostic circuitry, flasher/buzzer, fire
alarm activated flasher
Optional vandal resistant shield with tamper proof screws
Certified CSA C22.2 No141
Certified CSA C860-01
Made in Canada
111⁄4” (28.7 cm)
Dual voltage input: 120/347 VAC or 120/277 VAC.
17” (43.2 cm)
33⁄8” (8.6 cm)
Power Consumption and Unit Rating
Model
Wattage Capacity
AC Specs
Exit Sign module
Less than 2W
L2
30min
1h00
1h30
2h00
4h00
-
-
-
-
-
20
15
12
8
-
50
30
24
16
8
50
30
24
16
8
50
36
24
18
9
100
72
48
36
18
0.11/0.04 Amp
L5
120 / 347Vac
L5A
0.22/0.08 Amp
H5A
H10A
Ordering Information
Series
PRE1= single face
ceiling or wall mount
PRE2= double face
ceiling mount
PRE1N= single face
wall mount (less
canopy)
PREU= universal,
2 faces backplate
and canopy
Colour
Voltage
Powerpack
Legend
W=
factory white
B=
black
3= 120/347Vac
2= 120/277Vac
-L2= 6V-20W Lead cal
-L5= 6V-50W Lead cal
-L5A= 12V-50W Lead cal
-H5A= 12v-50W Nimh
-H10A= 12V-100W Nimh
Blank=
red letters
G=
green letters
Options
Blank= no options
VRTP= polycarbonate shield
D3= 15 min. time delay
with tamper proof screws
U= auto-diagnostics
TP= tamper proof screws
UN= auto-diagnostics
BA= brushed aluminum
non-audible
exit stencil
FZ= flasher buzzer
FL= flasher
FA= fire alarm activated flasher
FBF= flasher buzzer +fire alarm activated flasher
990.0119-E= tamper proof bit*
*One bit per order. Sold separately.
EXAMPLE: PRE1W3-L2/2MI
4
Number
of Heads
Head Style
and Wattage
/0=
no heads
/2=
two heads
MI= 6V 6 watts MR16
MJ= 6V10W MR16
MO= 12V10W MR16
MK= 12V12W MR16
LG= 12V4W LED MR16
Project/Location:
LPEXHZ Series
Contractor:
Exit Sign for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Date:
Prepared by:
Features
Typical Specification
Supply and install Emergi-Lite LPEXHZ Series LED exit signs. The equipment shall operate with universal two-wire
AC input voltage from 120Vac to 347Vac at less than 3watts and universal two-wire DC input voltage from 6Vdc to
48Vdc at less than 2watts for single and double face signs. Designed specifically for hazardous locations, the
equipment frame shall be of industrial grade high impact thermoplastic with a gasket around lenses and canopy. The
faceplate(s) shall be constructed of heavy-duty vandal-resistant polycarbonate and feature an even illuminated
legend. The light source shall be light emitting diodes (LED). Red LED technology shall be AlInGaP. An LED-sensitive
diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even illumination.
The equipment shall be certified for Hazardous Locations; Class I Zone 2 Groups: IIA, IIB and IIC and Class I Division 2
Groups: A, B, C and D with a temperature code T6 (Maximum 85ºC). The equipment shall be designed specifically for
high abuse areas. The self-powered model shall stay illuminated during emergency operation for at least 90 minutes
upon AC failure and shall include a magnetic test switch and self-testing/self-diagnostic functions.
The equipment shall automatically self test for 5 minutes every 30 days, 30 minutes every 60 days and 90 minutes
annually. A “Service required” lamp shall be located near the test switch and flash when a fault is detected. A twoLED diagnostic display shall be located inside the equipment and shall identify the eventual source of failure (battery,
charger circuitry, or LED lamps).
Certified Class I Zone 2, Groups IIA, IIB and IIC
Certified Class I Division 2, Groups A, B, C and D as per
CSA C22.2 No.137-M1981
Temperature Code: T6 (maximum 85ºC as per Canadian
Electrical Code, Part I and CSA C22.2 No.137-M1981)
CSA certified, meets or exceeds C860 requirements
Input voltages: 120 to 347Vac universal AC-input;
6 to 48Vdc universal DC-input
High impact thermoplastic frame, with built-in gasket to
prevent water infiltration
Suited for areas with the risk of presence of flammable
gases, vapors or liquids able to create an explosive
atmosphere
Sealed faceplate of heavy-duty, vandal-resistant
polycarbonate
Tamper-resistant, hermetically sealed magnetic test switch
The exit sign shall be CSA-C860 approved.
Auto-diagnostic circuitry is standard on
self-powered models
The combination unit shall be Emergi-Lite model: ________________________________.
Sealed, maintenance-free, Nickel-Cadmium batteries
Dimensions
Batteries recharge as per CSA requirements and provide
90 minutes of emergency operation
43⁄8” (11 cm)
Long-life, energy-efficient AlInGaP red LED light source
Energy efficient – consumes less than 3watts in
AC or DC mode
Comes standard with industrial-grade, die-cast Aluminum
electrical box
½-inch electrical conduit entry on both sides and at the top
Wall mount
131⁄2” (34.2 cm)
91⁄8” (23.2 cm)
Ceiling mount
21⁄4” (5.7 cm)
NEXUS® compatible (for more information on NEXUS®,
please contact your sales representative)
131⁄4” (33.6 cm)
31⁄2” (8.7 cm)
Made in Canada
Wire Guards
Power Consumption
Model Number
AC Specs
DC Specs
AC/DC, red
120 / 347Vac
6 to 48Vdc
AC/DC, green
120 / 347Vac
6 to 48Vdc
Less than 2W
Self-powered, red
120 / 347Vac
NiCad battery
Min. 90 minutes
Self-powered, green
120 / 347Vac
NiCad battery
Min. 90 minutes
120Vac/Vdc 2 wires, red
120Vac
120Vdc
Less than 3W
Less than 3W
460.0080-E
Wall Mount
Less than 2W
Ordering Information
Series
LPEXHZ
Faces
2= single face, ceiling or wall mount
3= double face, ceiling mount only
Housing/Faceplate Colour
GG= grey/grey
Voltage
U= universal 120-347Vac, 6-48vdc
ID= 120-347Vac, self-powered (120 Min)
c/w auto-diagnostic (non-audible)
EM120-2W= 120Vac, 120Vdc 2 wire
NEX= Nexus® System Interface*
Options
Blank= red letters
G= green letters
*Consult your sales representative for options available
with NEXUS® System.
EXAMPLE: LPEXHZ2GGU
5
Project/Location:
EXHZ Series
Contractor:
Combination Unit for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Certified Class I Zone 2, Groups IIA, IIB and IIC
Certified Class I Division 2, Groups A, B, C and D as per
CSA C22.2 No.137-M1981
Certified temperature Codes for several types of
emergency lamps
Certified CSA C22.2 No141
Certified CSA C860
Polymeric frame, with built-in gasket to prevent
water infiltration
Heavy-duty 1/8-inch thick aluminum back plate with
key-holes for secure wall-mount installation
Sealed faceplate of heavy-duty, vandal-resistant
polycarbonate
Suited for areas with the risk flammable gases, vapors or
liquids that can create an explosive atmosphere
Exit sign module illuminated by long-life, energy-efficient
AllnGap red LEDs
Two MR16 halogen lamps, shielded by a cast aluminum
housing and a polycarbonate cover
Sealed, maintenance-free, Lead-Calcium or NickelCadmium batteries
Remote load capacity
Comes standard with auto-diagnostic functions
Comes standard with industrial-grade, die-cast Aluminum
electrical box
½-inch electrical conduit entry on both sides and at the top
Prepared by:
Typical Specification
Supply and install Emergi-Lite EXHZ Series combination of unit equipment and LED exit sign. Designed specifically
for hazardous locations, the equipment frame shall be of industrial grade polymer with gaskets around both sides of
the frame contour. The back plate shall be made of 1/8-inch thick aluminum sheet and shall include knockouts for
installation on an electrical box and four keyholes for alternative installation on a wall surface.
The faceplate shall be constructed of heavy-duty vandal-resistant polycarbonate and feature a uniformly illuminated
legend. The light source shall be light emitting diodes (LED). Red LED technology shall be AllnGap. An LED-sensitive
diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even illumination.
When specified, the equipment shall have attached a lower compartment containing two emergency lights with
adjustable swivels and long-life MR-16 halogen or LED lamps of ___ V and ___ W. The lamps shall be shielded by a
cast aluminum housing and protected by a shock-absorbent, transparent polycarbonate cover.
The equipment shall be certified for Hazardous Locations; Class I Zone 2 Groups: IIA, IIB and IIC and Class I Division 2
Groups: A, B, C and D. The standard AC input voltage shall be: 120/347Vac. The equipment shall be equipped with a
magnetic test switch located behind the face plate and two LED pilot lights: AC-on and “Service required”. The unit
shall include auto-diagnostic functions monitored by a micro-controller and shall automatically self test for one
minute every 30 days, 10 minutes in the 6th month and 30 minutes annually. The “Service required” LED shall light
when a fault is detected. A four-LED diagnostic display located inside the equipment shall identify the source of the
failure (battery, charger circuitry, or lamp load).
The exit sign module shall be CSA-C860 approved.
The combination unit shall be Emergi-Lite model: ________________________________.
Dimensions
31⁄2” (8.7 cm)
141⁄2” (36.8 cm)
133⁄4” (34.9 cm)
135⁄8” (32.1 cm)
NEXUS® compatible (for more information on NEXUS®,
please contact your sales representative)
Made in Canada
61⁄4” (15.9 cm)
Features
Date:
Wire Guards
460.0078-E
Wall Mount
Power Consumption and Unit Rating
Model Number
AC Specs
EXHZL3
EXHZN3
120 / 347Vac
EXHZN6A
EXHZ=
combo Exit Class I Div. 2
Housing/Face Color
GG= grey/grey
Lamp
Rating
Temperature Maximum Replacement
Code
Temperature
Part #
30min
1h00
1h30
2h00
4h00
0.15 / 0.06 Amp
36
21
15
12
-
6V - 10W
T3C
160°C
580.0079-E
0.15 / 0.06 Amp
36
30
20
15
-
12V - 12W
T3A
180°C
580.0080-E
0.30 / 0.10 Amp
60
40
30
20
10
12V - 20W-H
T2D
215°C
580.0068-E
Note: Use qualified replacement lamps to avoid risk of over-heating
Ordering Information
Series
Temperature Codes
Wattage Capacity
Voltage
Blank= 120/347Vac
2= 120/277Vac
Capacity
L3=
6V - 36W lead acid
N3=
6V- 36W NiCad
N6A=
12V - 60W NiCad
Letter Color
Blank= red letters
G= green letters
EXAMPLE: EXHZGGN3U12MJ
6
Options
U= auto-diagnostics,
audible
UN= auto-diagnostics,
non-audible
NEX= Nexus® system
interface*
*Consult your sales
representative for
options available with
NEXUS® System.
Number of Heads
Blank= 0 heads
/2= two heads
Lamp/Wattage
MJ= 6V - 10 watts, MR16
MK= 12V - 12 watts, MR16
MW= 12V - 20 watts, MR16-IR
Project/Location:
TM
Contractor:
Lux-Ray Series
Date:
with white LED
normally-on option
Prepared by:
Features
Low profile, slim lines – measures only 6.6” x 9.5”
Fully gasketed housing, rugged die-cast body and
UV-resistant lens
Fast and easy installation
Easy to replace Xenon lamps
Available as a remote fixture as well.
Optional dual-mode illumination uses 5-watt LED lamp
for normal lighting
Wire Guards
460.0082-E
Wall Mount
2 X 6W
2 X 10W
Center-to-Center
Mounting
height 3’ Wide Path 6’ Wide Path
7.5’
28’
19’
8.5’
25’
18’
7.5’
30’
28’
8.5’
34’
30’
6.6”
[16.7cm]
Lux-RayTM units with this feature include a secondary light source, a 5-watt, 50,000-hour LED lamp dedicated to normal
lighting. The equipment has two independent circuits, electrically isolated from each other: the standard input for
emergency lighting and a secondary input for normal lighting. The secondary input can be connected to a regular AC line
that may include an electrical switch.
Typical Specification
Supply and install the Emergi-Lite Lux-RayTM Series battery unit. The unit shall be suitable for wall mounting directly on
the electrical box, or on the wall surface, using rigid conduit entry at the top of the unit. The unit body shall be made of
die-cast Aluminum with painted color: _____ and a UV and impact resistant polycarbonate lens. The emergency lights
shall be two high-output Xenon lamps hosted by a vacuum-plated die-cast reflector. The unit shall be rated 120/347VAC,
60Hz dual input voltage. The battery charger shall include low voltage disconnect to prevent deep discharge, battery
lockout to prevent battery drain prior to energizing the utility power, and brownout protection which will automatically
switch unit into emergency mode if the utility power falls below 80% of nominal level.
Models with Lead-Calcium battery shall be equipped with a pulse type charging circuitry and shall provide minimum 90
minutes of emergency lighting. The voltage/current-limiting circuitry will minimize energy consumption and shall be factory
set with a charging voltage tolerance of ±1% to enable a longer battery life. A red LED pilot light shall indicate AC power.
Photometric Performance
Lamp Wattage
Dual-mode illumination (optional)
Models with Nickel Metal Hydride batteries shall be equipped with a non-audible self-test and diagnostic circuit and shall
provide minimum 60 minutes of emergency lighting. The unit shall self test for one minute every month, 30 minutes
every six months and 90 minutes annually. The pilot light shall be a bi-color LED and shall change color from green to
flashing red when a failure is detected from the battery, charger circuit or lamps. A label located near the pilot light shall
describe the diagnostic for each flashing code.
Models with dual-mode illumination shall include a power LED lamp with a separate electrical input 120/347Vac for
connection to a switched AC line. The LED lamp shall consume less than 5 Watts and shall have an operational life of
50,000 hours, until 70% of initial light level.
The unit shall be CSA Certified to C22.2 No.141. The unit shall be Emergi-Lite Model:__________________.
2.9”
[7.3cm]
9.5”
[24.1cm]
Easy self-adhesive
gasket, must be used in
all exterior applications,
but comes standard
with all units.
Easily accessible, stand
alone die-cast back
plate with universal
knock-out pattern.
Patent pending vacuum
metalized die-cast
reflector. The multiple
conical section reflector
was engineered to
create a well defined
path of egress.
The front cover includes
the battery*, reflector
and electronics. The
connection is done
using an AC quick
connect plug.
* Nickel Metal Hydride:
State-of-the art
battery technology;
Lead-free and
Cadmium-free; a
greener choice.
Power Consumption and Unit Rating
Model
AC Specs
LED module with heat
sink. (Normal lighting)
Easy to replace Xenon
lamps Unlike quartz
halogen lamps.
Replacement Lamps
DC Specs
LUX12, LUXH12
120 / 347Vac
0.11 / 0.04 Amp
Less than 10.5W
6V - 12W
Minimum 90 min.
Ordering Code
LUXH20
120 / 347Vac
0.11 / 0.04 Amp
Less than 10.5W
6V - 20W
Minimum 60 min.
570.0213-E
X6W, 6V - 6W Xenon
LUX-2
120 / 347Vac
0.04 Amp
Less than 5W
570.0214-E
X10W, 6V - 10W Xenon
LED normal lighting
Specifications
Ordering Information
Series
LUX12= 6V - 12W, lead calcium battery, 90 minutes
LUXH12= 6V - 12W, NiMH battery (Nickel Metal Battery)
(-20ºC to +40ºC) comes with UN*, min. 60 minutes
LUXH20= 6V - 20W, NiMH battery with UN*, min. 60 minutes
*UN = auto diagnostic, non-audible.
Colour*
Lamp Wattage
/X6= 6Volts-6Watts
/X10= 6Volts-10Watts*
OW= off white
BK= black
BZ= dark bronze
PG= platinium grey
2 Xenon wedge base T3-1/4.
*Available with LUXH20 only
* Other colours available on demand.
Consult your sales representative.
Option
D3= time delay 15 minutes
-2= dual-mode illumination
EXAMPLE: LUX12/X6OW-2
7
Project/Location:
HZM Series
Contractor:
Battery Unit for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Date:
Prepared by:
Typical Specification
Features
Certified Class I Zone 2, Groups IIA, IIB and IIC
Certified Class I Division 2, Groups A, B, C and D as per
CSA C22.2 No.137-M1981
Certified temperature Codes for several types of
emergency lamps
Suited for areas with the risk of flammable gases, vapors
or liquids that can create an explosive atmosphere
Supply and install Emergi-Lite HZM Series of battery units. Designed specifically for hazardous locations, the
equipment frame shall be of industrial grade polymeric metal with gaskets around both sides of the frame contour.
The frame shall be fixed between two plates made of 1/8-inch thick aluminum sheet. The back plate shall include
four keyholes for wall-mount installation. The front plate shall include two water-tight lenses for pilot lights: AC-on and
“Service required”. When specified, the equipment shall have attached a lower compartment containing two
emergency lights with adjustable swivels and MR-16 halogen or LED lamps. The lamps shall be shielded by cast
aluminum housing and protected by a shock-absorbent, transparent polycarbonate cover.
Certified CSA C22.2 No141
The equipment shall be certified for Hazardous Locations; Class I Zone 2 Groups: IIA, IIB and IIC and Class I Division 2
Groups: A, B, C and D. The standard equipment shall have a dual AC input voltage: 120/347Vac and shall be
equipped with a magnetic test switch located on the left side of the frame.
Heavy-duty 1/8-inch thick aluminum back plate with
keyholes for secure wall-mount installation
The unit shall include self-testing/self-diagnostic functions monitored by a micro-controller and shall automatically
self test for one minute every 30 days, 10 minutes in the 6th month and 30 minutes annually. The “Service required”
LED shall light when a fault is detected. A four-LED diagnostic display located inside the equipment shall identify the
source of the failure (battery, charger circuitry, lamp load).
Sealed, maintenance-free, Lead-Calcium batteries with
up to 120W emergency power
The battery unit unit shall be Emergi-Lite model: ________________________________.
Polymeric frame, with built-in gasket to prevent water
infiltration
Two MR16 halogen or LED lamps, shielded by a cast
Aluminum housing and a polycarbonate cover
Built-in microcontroller-based battery charger and
auto-diagnostic circuitry
Dimensions
½-inch electrical conduit entry on both sides and at
the top
14 ⁄ ”(36.8 cm)
1
NEXUS® compatible (for more information on NEXUS®,
please contact your sales representative)
2
3 ⁄ ” (8.7 cm)
1
2
13 ⁄ ” (34.9 cm)
3
4
1
5
8
Made in Canada
6 ⁄ ” (15.9 cm)
12 ⁄ ” (32.1 cm)
4
Wire Guards
460.0078-E
Wall Mount
Power Consumption and Unit Rating
Model Number
HZM36
HZM72
120 / 347Vac
HZM120
Temperature Codes
Wattage Capacity
AC Specs
4h00
Lamp
Rating
Temperature Maximum Replacement
Code
Temperature
Part #
30min
1h00
1h30
2h00
0.17 / 0.06 Amp
36
21
15
12
-
6V - 10W
T3C
160°C
580.0079-E
0.30 / 0.10 Amp
72
42
30
24
12
12V - 12W
T3A
180°C
580.0080-E
0.30 / 0.10 Amp
120
70
50
40
20
12V - 20W-H
T2D
215°C
580.0068-E
Note: Use qualified replacement lamps to avoid risk of over-heating
Ordering Information
Series
06HZM= 6 volts
12HZM= 12 volts
Capacity
36= 6V-36 watts
72= 12V-72 watts
120= 12V-120 watts
Colour
Blank= grey
A.C. Voltage
Blank= 120/347Vac
-2= 277Vac
Options
# of Heads
/0= No head
U= auto-diagnostics, audible
UN= auto-diagnostics, non-audible (standard) /2= 2 heads
NEX= Nexus® system interface*
*Consult your sales representative for options
available with NEXUS® System.
EXAMPLE: 06HZM36UN/2MJ
8
Lamp/Wattage
MJ= 6V - 10 watts, MR16
MK= 12V - 12 watts, MR16
MW= 12V - 20 watts, MR16-IR
LG= 12V - 4 watts, LED MR16
Project/Location:
ESLNX
Battery Unit Series
Contractor:
Date:
Prepared by:
6, 12 and 24 volts, NEMA-4X
Typical Specification
Supply and install the Emergi-Lite NEMA-4X Rated ESLNX Series battery unit. Specifically designed for high abuse
areas and wet locations, the fiberglass reinforced polyester housing shall be fully gasketed as well as the clear heavyduty UV resistant polycarbonate lamp enclosure. The lamps shall be fully adjustable without tools and shall be high
efficiency halogen or LED MR16.The Emergi-Lite Smart Diagnostic Micro controller board shall supply the rated load
for a minimum of a 1/2 hour to 87.5% of the rated battery voltage. The unit shall be rated 120V or 347V, 60 Hz and
shall have an output of _______ volts.
The charger shall be fully computer tested and its charge voltage factory set to ± 1% tolerance. Chargers with field-adjusted
potentiometers are not acceptable. A pulse-type charger shall be employed to promote long battery life and reduce the
potential for grid corrosion. The charger shall provide a continuous high charge to recharge the battery, when the battery is
at full capacity, the charger will shut-off. Periodically the charger shall provide a pulse of energy to keep the battery topped
off. The Pulse charge shall be current limited and precisely regulated by a micro-processing circuit, which samples the
battery in relation to its temperature, state or charge and input voltage fluctuations. The charger shall be current limited,
temperature compensated, shortcircuit proof and reverse polarity protected. The unit shall be furnished with an electronic
lockout circuit, which will connect the battery when the AC circuit is activated, and an electronic brownout circuit, which will
activate the emergency lights when utility power dips below 75% of nominal voltage. A low voltage battery protection circuit
shall be provided and will disconnect the battery form the fused output circuit at the end of discharge. The unit shall self-test
for 1 minute every 30 days, 10 minutes on the 6th month and 30 minutes every 12 months. The unit shall be capable of full
recharge in compliance with CSA specifications. The unit shall be furnished with sealed dust tight relay, a test switch and
diagnostic LED indicator lights to continuously monitor the status of the unit: Battery Failure, Battery Disconnected, Charger
Failure, Lamp Failure, Service Alarm, AC “ON”, Charger High Rate.
Harsh environment emergency lighting units: The
ESLNX Series battery units are specifically designed for use
in industrial facilities where equipment is exposed to dust,
water, oil or corrosive substances. Meets NEMA-4X to
protect circuitry from harmful dust or liquid sprays, sealed
and gasketed unit made of fiberglass reinforced polyester.
Features
Delivers great pathway illumination up to 70 feet, center
to center (with M20 WH lamp)
Fully gasketed fiberglass reinforced polyester housing NEMA 4X
Solid-state pulse-type charger – current-limited,
temperature-compensated, short-circuit proof and
reverse-polarity protected.
Unit comes standard with electronic lockout and
brownout circuits
Sealed dust-proof transfer relay, test switch and LED
indicator lights
Long-life, maintenance-free sealed lead acid battery
Standard 120/347Vac input voltage with line cord kit
NEXUS® compatible (for more information on NEXUS®,
please contact your sales representative)
The unit shall be Emergi-Lite model: __________________________________.
Dimensions
Wire Guards
NEMA-4X
460.0034-E
Made in Canada
Wall Mount
Power Consumption and Unit Rating
61⁄4”[15.9cm]
131⁄4”[33.7cm]
Model
185⁄8” [47.5cm]
06ESLNX36
06ESLNX72
06ESLNX108
06ESLNX180
12ESLNX36
12ESLNX72
12ESLNX100
12ESLNX144
12ESLNX200
12ESLNX250
24ESLNX144
24ESLNX288
24ESLNX350
AC Specs
120/347Vac
120/347Vac
120/347Vac
0.10/0.04 Amp
0.22/0.08 Amp
0.22/0.08 Amp
0.22/0.08 Amp
0.09/0.03 Amp
0.15/0.06 Amp
0.34/0.12 Amp
0.40/0.14 Amp
0.41/0.14 Amp
0.41/0.14 Amp
0.55/0.20 Amp
0.67/0.23 Amp
0.67/0.23 Amp
Wattage Capacity
30 min.
1 hour
1h30
2 hours
4 hours
36
72
108
180
36
72
100
144
200
250
144
288
350
21
42
63
105
21
42
58
84
117
120
84
168
200
15
30
45
75
15
30
42
60
83
90
60
120
144
12
24
36
60
12
24
33
48
67
72
48
96
120
6
12
18
30
6
12
17
24
33
36
24
48
60
Ordering Information
Series
Housing
Capacity
06ESL= 6 volts
NX= NEMA 4X
36= 36 watts
72= 72 watts
108= 108 watts
180= 180 watts
12ESL= 12 volts
NX= NEMA 4X
36= 36 watts
72= 72 watts
100= 100 watts
144= 144 watts
200= 200 watts
250= 250 watts
24ESL= 24 volts
NX= NEMA 4X
144= 144 watts
288= 288 watts
350= 350 watts
Options
A.C. Voltage
Blank= 120/347Vac input
-2= 277Vac input
Blank= no option
A= ammeter
D3= time delay 15 min.
NEX*= Nexus® system (6, 12 and 24V)
P= light activated test switch
T= lamp disconnect
TB= D.C. terminal block
U= auto diagnostic
V= voltmeter
X= remote test reciever
H= heater & thermostat 120V
H3= heater & thermostat 347V
Number of Lamps
/0= no heads
/1= one head
/2= two heads
Lamp Wattage
MI= 6V 6W, MR16
MJ= 6V 10W, MR16
MK= 12V 12W, MR16
MA= 12V 20W, MR16
MD= 24V 20W, MR16
MS= 24V 12W, MR16
MW= 12V 20W, High output
LG= 12V 4W, LED
*Not all options available with Nexus®.
Please contact your sales representative.
EXAMPLE: 24ESLNX350/2MS
9
Project/Location:
EF41 Series
Contractor:
Remote Fixture for Hazardous Locations:
Class I Zone 2 Groups: IIA, IIB and IIC
Class I Division 2 Groups: A, B, C and D
Features
Supply and install Emergi-Lite EF41 Series remote emergency lighting fixture. The fixture shall have a single- or
double-lamp configuration (as specified) and shall include a fully gasketed die-cast aluminum back plate and a clear
heavy-duty UV resistant polycarbonate cover. The fixture shall come standard with a 4-inch octagonal box, stainless
steel tamper-proof screws and dedicated screwdriver bit.
Certified Class I Zone 2, Groups IIA, IIB and IIC
Certified Class I Division 2, Groups A, B, C and D as per
CSA C22.2 No.137-M1981
Temperature Codes: T3B (10W and 12W MR16 lamps)
and T2C (20W MR16 lamps), as per Canadian Electrical
Code, Part I and CSA C22.2 No.137-M1981)
The equipment shall be certified for Hazardous Locations; Class I Zone 2 Groups: IIA, IIB and IIC and Class I Division 2
Groups: A, B, C and D and shall be listed to CSA C22.2 No. 50 and CSA C22.2 No.137-M1981. The fixture shall be
rated with a temperature code for the selected lamps as in the table below.
Extreme operational temperature range: -40ºC to +40ºC.
High-efficacy MR16 halogen lamps of 10W, 12W and
20W (see specification table)
Prepared by:
Typical Specification
Quality illumination requires fewer fixtures
Choice of single- or double-lamp models.
Date:
Each lamp in the fixture shall be able to be oriented without tools and should be equipped with MR16 halogen lamp(s)
of _____Volts _____ Watts.
The unit shall be Emergi-Lite model: ______________________________.
Input voltage: 6V, 12V, 24V or 120V
Fully gasketed die-cast aluminum back plate
Clear polycarbonate cover, UV and impact resistant
Dimensions
Easy installation on a 4-inch octagonal box (included)
57⁄8”
(14.9cm)
REMOTE JUNCTION
FIXTURE
BOX
33⁄4”
21⁄8”
(9.5cm)
(5.4cm)
Comes standard with tamper-proof screws and bit
71⁄8”
(18.1cm)
Made in Canada
45⁄8”
(11.7cm)
4” JUNCTION
BOX
Replacement Lamps
Model
Lamp Type
Voltage-Wattage
Temperature Code
580.0079-E
MR16-Flood
6V - 10W
T3B (Max. 165°C)
580.0068-E
MR16-IR flood (High output)
12V - 20W-H
T2C (Max. 230°C)
580.0077-E
MR16-Flood
24V - 20W
T2C (Max. 230°C)
580.0080-E
MR16-Flood
12V - 12W
T3B (Max. 165°C)
580.0070-E
MR16-Flood
24V - 12W
T3B (Max. 165°C)
Ordering Information
Series
EF41
Number of lamps
Blank= one lamp
D= two lamps
Lamp Type
Colour
M= MR16
MH= MR16 high output (12V-20 watts only)
EXAMPLE: EF41M-G-6V10W
10
-G= grey
Voltage and Wattage
-6V10W= 6V - 10 watts, MR16
-12V12W= 12V - 12 watts, MR16
-12V20W= 12V - 20 watts, MR16
-24V12W= 24V - 12watts, MR16
-24V20W= 24V - 20 watts, MR16
-120V20W= 120Vac/Vdc - 20 watts, MR16 GU10
-12/20H= 12V - 20 watts, MR16 high output
-LG= 12V - 4 watts, LED MR16
Project/Location:
Contractor:
EF25 Series
Date:
Prepared by:
Weatherproof Remote Fixture
Typical Specification
Features
Supply and install Emergi-Lite EF25 Series remote emergency lighting fixtures. These remote fixtures will consist of
either single or double lamp configurations according to the design. These fixtures shall be built from fully gasketed
die cast aluminum body, swivel and canopy with a tool less removable lamp cover. Units shall be specifically designed
for wet and cold weather (-40°C) locations. The standard unit will come with stainless steel screws.
Weatherproof MR16 powder coated cast
aluminum light head
Quality illumination requires fewer fixtures
Up to 24Volts 50Watts
Available single or double head
The head(s) shall be fully adjustable and should be equipped with MR16 halogen lamp(s).
Preinstalled on a Red Dot® weatherproof junction box:
The unit shall be Emergi-Lite model: _______________.
Five Outlets, 41⁄8" Diameter
Copper-free* aluminum provides increased
corrosion resistance.
Dimensions
Precision cast and machined surfaces permit safer
wire pulling.
Clean cover edges provide good gasket sealing.
Precision NPT threads allow trouble-free field installation
for rigid, IMC or EMT conduit.
5”
[12.7cm]
47⁄8”
[12.4cm]
Deep slotted stainless steel cover screws for faster
installation.
61⁄2”
[16.5cm]
For use with 6V, 12V or 24V DC MR16 lamps
4 ⁄8”
[10.6cm]
1
233⁄4”
2 ⁄4”
[6.9cm]
17⁄8”[4.8cm]
63⁄4”
[17.3cm]
91⁄8”
[23.3cm]
53⁄4”
[14.7cm]
171⁄4”
[43.9cm]
4 ⁄8”
[10.6cm]
1
Replacement Lamps
Model
41⁄8”
[10.6cm]
Lamp Type
Voltage-Wattage
MR16-Flood
12V - 20W
580.0079-E
580.0080-E
6V - 10W
580.0070-E
24V - 12W
Ordering Information
Series
EF25= weatherproof remotes
Number of heads
Blank= single head
D= double head
Colour
Blank= standard color black head/
grey junction box
Lamp Voltage
-6V= 6 Vdc
-12V= 12Vdc
-24V= 24Vdc
Wattage
6W= 6 watts, MR16 (6V only)
10W= 10 watts, MR16 (6V only)
12W= 12 watts, MR16 (12&24V)
20W= 20 watts, MR16 (12&24V)
35W= 35 watts, MR16 (12&24V)
50W= 50 watts, MR16 (12&24V)
20WH= 20 watts, MR16, IR* (12V only)
35WH= 35 watts, MR16, IR* (12V only)
50WH= 50 watts, MR16, IR* (12V only)
LG= 12V - 4 watts, LED MR16
*IR= high output lamp
EXAMPLE: EF25-6V10W
11
Project/Location:
FlexPole
Model PS & PD
Contractor:
Date:
Prepared by:
Compact, Efficient and Flexible
Features
Our Basic Model (Dual Compartment)
This snap on all aluminum extrusion is 2” x 15/8” comes
complete with a metal barrier between the power and
communication sections. Our basic model is supplied
with two standard Decor Duplex Receptical 125V – 15A, 3
Decora knockouts (2 front, 1 back). A 10’ line cord and plug
with 3# 14SJT wires is supplied for connecting to
receptacle in the ceiling.
Emergi-Lite Model “PS” and “PD” FlexPole with its efficient concept easily locates electrical, telephone or computer
outlets where most needed. When changing open area office layouts the FlexPole is simply unplugged and relocated.
The all aluminum extrusion eliminates the nuisance of transient inductions.
The ceiling mounting bracket is engineered to fit any inverted
T Bar System. The maximum capacity of the communication
section is 4-25 pair or 2-50 pair telephone cables.
Emergi-Lite standard finish is grey satin baked enamel.
Dimensions
Installation is complete with an easy to install ceiling mounting bracket with canopy.
Notes
CSA allows a maximum of 2-15A standard duplex receptacles when using a line cord or a maximum of 4 duplex
receptacles 15A on 2 separate circuits using a junction box for permanent connection. CSA does not allow use of line
cord for isolated ground receptacles. A maximum of 2-IG receptacles per circuit with a maximum of 2 circuits-4
duplex receptacles allowed for isolated ground.
Made in Canada
PS Model
PD Model
Ordering Information
Model
PS= PS series (small)
PD = PD series (deep)
Pole Height*
86= 8' 6"
96= 9' 6"
106= 10' 6"
12= 12' 0"
126= 12' 6"
136= 13' 6"
14= 14' 0"
146= 14' 6"
15= 15' 0"
*Standard grey
Other heights available
Duplex
Options
BP= blank pole
R__ = decora duplex receptacle (specify qty)*
IG__ = Isolated ground duplex receptacle (specify
quantity ) included JB option
*R1 and R2 c/w line cord, R3 and R4 c/w junction box
and dual circuit
Notes : Max 2 duplex per circuit
Max 2 circuits 15A 125V per pole
Brand
DUC= dual circuit
E = Emergi-Lite
K__ = extra decora KO's * (specify extra quantity)
BR= barrier **
JB= junction box
W= white finish
*3 decora KO's are standard except on blank pole
** Barrier is standard except on blank pole
Accessories
LCFP= replacement line cord
MKFP= replacement mounting kit
EXAMPLE: PS96BPBRE= 9'6" no duplex c/w barrier
EXAMPLE: PS96R2E= 9'6" c/w 2 decora duplex, 3 decora K/O
EXAMPLE: PS96R2K1E= 9'6" c/w 2 decora duplex, 4 decora K/O
EXAMPLE: PS11R1E= 11'0" c/w 1 decora duplex, 3 decora K/O
12
White LEDs in
Emergency Battery
Units and Remotes
New!
Product
EF40 Series
Remote Fixture
Literay Series
Wall Mount
Remote Head
EF9/EF9Q/EF9M
Series
Micro Tungsten
Quartz and MR16
Lamps
Distinction
Series
Surface Designer
Series
EFR Distinction
Remote Collection
Recessed Designer
Series
Survive-All
EF39 Series
NEMA-4X Certified
Remote Fixture
Retract-a-Lite
Series
Mini
Retract-a-Lite
Fully Concealed,
Easy to Retrofit
Distinction
Series
6, 12 and 24 Volts
Decorative Battery
Units
JMLA Series
6 and 12 Volts
Decorative Battery
Units
Survive-All
NXM Series
NEMA-4X Certified
Battery Unit
Features
Quality illumination requires fewer fixtures
Shielded to prevent tampering
Easy installation
Easy Lamp replacement
Compact wall sconce unit for indoor and outdoor use
High impact resistant polycarbonate diffuser
Corrosive resistant die-cast aluminum housing
Vandal resistant
Variable light patterns using adjustable lens
Fire-retardant thermoplastic
300° rotation
Replacement Lamps
Ordering Code
Type
Volts/Watts
MR16-Flood
12V - 12W
580.0079-E
580.0080-E
6V - 10W
580.0077-E
580.0093-E
24V - 20W
LED
12V - 4W
MR16-Flood
12V - 12W
570.0079-E
580.0080-E
6V - 10W
580.0077-E
24V - 20W
580.0093-E
LED
570.0016-E
Tungsten
6V - 9W
570.0045-E
Tungsten
24V - 9W
580.0015-E
Halogen (quartz)
12V - 12W
580.0093-E
LED
12V - 4W
MR16-Flood
12V - 12W
570.0074-E
Remote head: 1, 2 or 3 head configurations
Highly-resistant powder-coated, die cast aluminum construction
6W, 10W, 12W, 20W, 35W, and 50W availability
6W, 10W, 12W, 20W, 35W, and 50W availability
Choice of housing for new construction or insulated ceiling
EFR8NB and EFR8R are made of powder coated or electro-plated steel
EFR9 is made of die-cast
Fully gasketed cast aluminum back plate with clear polycarbonate cover –
NEMA-4X Certified
UV and impact resistant cover, choice of single or double lamp models
Available in 6, 12 and 24 volts models with various wattages
NSF Certified for food processing plants**
Remote only visible upon power failure
Front can be painted or wall papered on-site to match existing decor
Easy to retrofit in finished walls: the unit slides in through an 8.25-in by 5.75-in
hole, open next to a wall stud, no pre-installed back box
Output: 12Vdc with up to 100 watts of power
Direct connection to 120 or 347Vac power generators
Rugged steel cabinet with corrosion-resistant undercoating
Solid-state pulse-type charger – current-limited, temperature-compensated,
short-circuit proof and reverse-polarity protected.
Electronic lockout and brownout circuits
Long-life, maintenance-free lead acid battery, NEXUS® compatible**
580.0080-E
6V - 6W
580.0077-E
580.0093-E
24V - 20W
LED
12V - 4W
MR16-Flood
12V - 12W
580.0079-E
580.0080-E
6V - 10W
580.0077-E
580.0093-E
24V - 20W
LED
12V - 4W
MR16-Flood
12V - 12W
580.0079-E
580.0080-E
12V - 4W
6V - 10W
580.0077-E
24V - 12W
580.0093-E
LED
12V - 4W
580.0080-E, 580.0064-E
580.0083-E, 580.0076-E
MR16 flood
12V-12W-50W
580.0068-E, 580.0090-E
580.0089-E
580.0093-E*
MR16
High-output
12V-20W-50W
LED
12V - 4W
580.0080-E, 580.0064-E
580.0083-E, 580.0076-E
MR16 flood
12V-12W-50W
580.0068-E, 580.0090-E
580.0089-E
580.0093-E*
MR16
High-output
12V-20W-50W
LED
12V - 4W
580.0074-E
MR16 - Flood
580.0079-E
580.0093-E
6V-6W
6V-10W
LED
12V - 4W
Rugged steel cabinet with corrosion-resistant undercoating
Solid-state pulse-type charger – current-limited, temperature-compensated,
short-circuit proof and reverse-polarity protected
Unit comes standard with electronic lockout and brownout circuits
Long-life, maintenance-free lead acid battery, NEXUS® compatible**
580.0074-E
6V - 6W
580.0079-E
6V - 10W
Fully gasketed cast aluminum back plate with clear polycarbonate cover –
NEMA-4X Certified
NSF Certified for food processing plants, cold weather option (-40°C)
Comes standard with non-audible advanced diagnostic charger board,
10 minute time delay and lamp disconnect
Long-life, maintenance free sealed lead acid battery**
580.0074-E
M6W, MR16, 6V - 6W, flood
580.0079-E
M10W, MR16, 6V - 10W, flood
580.0080-E
M12W, MR16, 12V - 12W, flood
580.0068-E
MH20W, MR16, 12V - 20W
580.0093-E
LED, 12V - 4W
*Please consult the Emergi-Lite product catalogue or website for precise lamp ordering information
**For more extensive product information please consult the Emergi-Lite product catalogue or website
13
580.0080-E
MR16
580.0068-E
580.0093-E
12V - 12W
12V - 20W
LED
12V - 4W
Continued on next page Project/Location:
Contractor:
Notes
Date:
Prepared by:
15
w w w.emergi- lit e . c om
All information and specifications contained in this catalogue are subject to change due to
engineer design, errors and omissions.
Illustrations and diagrams within this catalogue may vary from actual products.
© 2010 Thomas&Betts Limited. All rights reserved.
Printed in Canada. 04/10/1000. Order No.: EL/N-Products-E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement