XMV8280 XMV8140 XMV4280 XMV4140

XMV8280 XMV8140 XMV4280 XMV4140
XMV Series
Multi-channel Power Amplifiers
XMV8280
XMV8140
XMV4280
XMV4140
2U
XMV8280 Rear Panel
XMV8280-D
XMV8140-D
XMV4280-D
2U
XMV4140-D
XMV8280-D Rear Panel
Multi-channel power amplifiers with features designed specifically to benefit
installation sound systems.
• Four-channel or eight-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously.
• 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.
• The newly developed Double Power Mode function effectively doubles the output power of selected channels.
• Equipped with either YDIF* digital audio format or Audinate’s digital audio network Dante for simple and fast system configuration.
• Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.
• An innovative, new, patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of
the amplifier's output stage up to over 90%.
• Feature a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount of current
draw while maintaining the same output power.
• Powerful, intelligent protection features for more reliable operation.
*YDIF: the newly developed digital transmission format; a unique propriety Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ether cable.
XMV Series
GENERAL SPECIFICATIONS
Model
XMV8280
XMV8140
XMV8280-D
XMV8140-D
XMV4280
XMV4140
XMV4280-D
XMV4140-D
280W x 8
140W x 8
280W x 8
140W x 8
280W x 4
140W x 4
280W x 4
140W x 4
280W x 8
140W x 8
280W x 8
140W x 8
280W x 4
140W x 4
280W x 4
140W x 4
4Ω/ Double Power Mode
560W x 4
280W x 4
560W x 4
280W x 4
560W x 2
280W x 2
560W x 2
280W x 2
8Ω/ Double Power Mode
560W x 4
280W x 4
560W x 4
280W x 4
560W x 2
280W x 2
560W x 2
280W x 2
250W x 8
125W x 8
250W x 8
125W x 8
250W x 4 / 40Ω
125W x 4 / 80Ω
250W x 4 / 40Ω
125W x 4 / 80Ω
1kHz,
4Ω
THD+N = 1%
8Ω
Output Power
100V line
High
impedance
70V line
Voltage Gain
250W x 8
125W x 8
250W x 8
125W x 8
250W x 4 / 20Ω
125W x 4 / 40Ω
250W x 4 / 20Ω
125W x 4 / 40Ω
RL=8Ω
31.7dB
28.7dB
31.7dB
28.7dB
31.7dB
28.7dB
31.7dB
28.7dB
RL=8Ω / Double Power Mode
34.7dB
31.7dB
34.7dB
31.7dB
34.7dB
31.7dB
34.7dB
31.7dB
100V
38.2dB
38.2dB
38.2dB
38.2dB
38.2dB
38.2dB
38.2dB
38.2dB
35.2dB
35.2dB
35.2dB
35.2dB
35.2dB
35.2dB
35.2dB
35.2dB
150W
70V
Input Sensitivity RL=8Ω
+4dBu
S/N Ratio
A-weighted
Power
Consumption
1/8 power (4Ω pink noise)
≥ 100dB
450W
250W
450W
250W
250W
150W
250W
Idle (4Ω)
73W
73W
73W
73W
37W
37W
37W
37W
Standby
23W
23W
23W
23W
18.5W
18.5W
18.5W
18.5W
THD+N
1kHz, half power
≤ 0.2%
Frequency
Response
RL=8Ω, 100V/70V,
Po=1W, 20Hz - 20kHz
0dB, ±1.0dB
Crosstalk
1kHz, half power, 8Ω, Att. max,
input 150Ω shunt
≤ -60dB
Maximum Input Level
+24dBu
Input Impedance
20kΩ (balanced), 10kΩ (unbalanced)
Analog Input
Connectors
Euroblock x 4 (6P, balanced)
Digital Input / Output
Speaker Output
RJ45 x 2 (YDIF IN / OUT)
Euroblock x 2 (6P, balanced)
RJ45 x 2 (Dante PRIMARY / SECONDARY)
Barrier strip x 8 pairs
Network
RJ45 x 2 (YDIF IN / OUT)
RJ45 x 2 (Dante PRIMARY / SECONDARY)
Barrier strip x 4 pairs
RJ45 x 1
Shared with Dante ports
RJ45 x 1
Remote, Fault Output
Euroblock (3P) x 1
Euroblock (3P) x 1
AC IN
AC Inlet x 1
AC Inlet x 1
Shared with Dante ports
Load Protection
POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection
Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute
(Restored automatically)
Power Supply Protection
Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling Fan
3-Speed fan x 2, front-to-back airflow
Power Requirements
100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions (WxHxD)
480 x 88 x 422mm (18.9" x 3.5" x 16.6")
480 x 88 x 422mm (18.9" x 3.5" x 16.6")
Weight
10.1kg (22.3lbs)
8.1kg (17.9lbs)
* Half power = 1/2 power output level
DIMENSIONS
XMV4280 / XMV4140 / XMV4280-D / XMV4140-D
422
422
unit : mm
XMV8280 / XMV8140 / XMV8280-D / XMV8140-D
88
88
480
480
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement