UV-Vis спектрометрия

UV-Vis спектрометрия
UV/VIS LAMPS AND REFERENCE MATERIALS
DEUTERIUM AND TUNGSTEN SOURCE LAMPS
PerkinElmer’s long-lifetime deuterium and tungsten source lamps
provide the best wavelength coverage across the working range of
the spectrometer for consistently high performance. All lamps are
pre-aligned and can be easily changed by the user. Our extensive
quality control and inspection process demands the very best
quality sources to provide high sensitivity and stability for your
key measurements.
Tungsten Lamp
Part No. B0114620
Deuterium Lamp
Part No. B0160917
Source Lamps for
LAMBDA Spectrophotometers
Deuterium Lamps
PerkinElmer reference
materials speed calibration
verification of UV/Vis and
UV/Vis/NIR spectrometers*,
Photometric and Wavelength
providing laboratory
Accuracy Reference Material Set
managers with the evidence
they need to pass the strictest quality audit.
A comprehensive range of certified traceable filters and sealed
cuvettes fit into the standard 10mm cuvette holder of PerkinElmer
and non-PerkinElmer instruments allowing users to generate
simple protocols to verify ordinate and abscissa accuracy, stray
light radiation, and spectral resolution. All reference materials
are certified traceable to NIST primary reference materials and
are supplied with a calibration certificate detailing the calibration
method and results.
A central PerkinElmer recertification laboratory equipped with
state-of-the-art instrument technology ensures a rapid turnaround
service for periodic recalibration of PerkinElmer and nonPerkinElmer reference materials, allowing laboratories to maintain
the requirements of their calibration SOP’s.
LAMBDA Model
Part No.
Features and Benefits
For LAMBDA 1/3
C0550505
• Comprehensive range of reference materials
For LAMBDA 1X/2X/3X/4X/5X/5XX/
Bio/6XX/8XX/9XX/10XX
B0160917
• Traceable to NIST
For LAMBDA 4/6
C6880055
LAMBDA Model
Part No.
For LAMBDA 1/3*
C0550500
For LAMBDA 1X/2X/3X/4X/Bio/6XX/8XX/9XX/10XX
B0114620
For LAMBDA 4/6*
C6880054
For 5X/5XX
B0091906
*Prefocused and prealigned.
MATERIALS CHARACTERIZATION: UV/VISIBLE
• Immediate availability
• Rapid recertification service for PerkinElmer and non-PerkinElmer
reference materials
Tungsten Lamps
182
Calibration Reference Materials for
PerkinElmer and
non-PerkinElmer
Spectrometers
*Not diode array spectrometers.
UV/VIS REFERENCE MATERIALS
CALIBRATION AND
RECERTIFICATION
SOLUTIONS
Photometric and Wavelength Accuracy Reference
Material Set
Description
Part No.
Photometric and Wavelength Accuracy Reference
Material Set
B0507805
Description
Part No.
Pharnacopoeia Solutions Reference Material Set
B2500100
Reference materials to verify calibration of UV/Vis and UV/Vis/NIR
Spectrometers in accordance with Pharmacopeia
monographs, including:
• Ordinate (photometric) accuracy (potassium dichromate in
perchloric acid)
• Abscissa (wavelength) accuracy (holmium perchlorate)
• Stray radiation level (potassium chloride)
• Resolution (toluene in hexane)
Set of reference materials comprising six solutions in sealed
cells — two reference solutions and four test solutions. The cells
are designed for use with standard 10mm cuvette holders of most
UV/Vis and UV/Vis/NIR Spectrometers. Reference materials are
accompanied with a Certificate of calibration and are supplied in a
re-useable UV-protective storage container.
A set of reference materials used to verify
the ordinate and abscissa (wavelength)
accuracy of UV/Vis and UV/Vis/NIR
Spectrometers. Neutral density glass
filters included in this kit are AL2A ISO
17025 accredited.
Reference Mirror for Reflectance Spectroscopy
The set includes four glass filters mounted in precision aluminum
spring mounts. The cells are designed for use with standard 10
mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers.
There are three neutral density glass filters for checking the
ordinate accuracy and a holmium oxide glass filter for checking
the wavelength accuracy of a spectrometer. Each filter has an
identification number. The ordinate and abscissa values of each
filter are quoted in the accompanying Certificate of Calibration,
nominally 1A (10%T), 0.5A (30%T) and 0.3A (50%T). Reference
materials are supplied in a re-useable UV-protective storage
container. Since UV/Vis and UV/Vis/NIR reference materials require
periodic recertification a rapid, convenient recertification program
is available through PerkinElmer’s central recertification laboratory.
Stray Light Solutions Reference Material Set
Description
Part No.
Stray Light Solutions Reference Material Set
B2500099
Set of reference materials comprising four solutions in sealed
cells — one reference solution and three test solutions. The cells
are designed for use with standard 10 mm cuvette holders of
most UV/Vis and UV/Vis/NIR Spectrometers. The test solutions,
comprising sodium iodide, sodium nitride, and potassium chloride,
act as a cut-off filter with a very precise wavelength. Reference
materials are accompanied with a Certificate of calibration and
are supplied in a re-useable UV-protective storage container.
Since UV/Vis and UV/Vis/NIR reference materials require periodic
recertification a rapid, convenient recertification program is
available through PerkinElmer’s central recertification laboratory.
www.perkinelmer.com/supplies
Pharmacopoeia Solutions Reference Material Set
Description
Part No.
Reference Mirror for Reflectance Spectroscopy
N1010504
This mirror is required to verify the specular reflectance calibration
of PerkinElmer and Non-PerkinElmer reflectance accessories. The
aluminum mirror with magnesium fluoride coating is a secondary
standard and is calibrated according to GLP regulations in the
wavelength range 250 to 2500 nm and includes spectral data on
convenient transfer media for %RC reflection correction.
Recertification Program for UV/Vis Calibration
Reference Materials
Description
Part No.
Recertification Program for UV/Vis Calibration
Reference Materials
N1010539
To guarantee the integrity of your Reference Material set they
must be recertified at periodic intervals. PerkinElmer offers a rapid
service through our convenient central recertification laboratory
in the USA. The recertification process includes as received
analysis, inspection and cleaning of the reference material,
recertification testing using state-of-the-art instrument technology,
and certificate of the results. Fast shipment to and from our
laboratory from anywhere in the world is free and we return your
recertified standards in ten business days or less from the time we
receive them.
Note: A recertification service for individual reference materials or non-PerkinElmer reference materials is also
available. Please contact our recertification laboratory in the United States by phone (1-203-402-6852) or email
([email protected]) for availability, pricing, requests, ordering procedures and other questions.
183
MACRO CELLS
HIGHEST QUALITY
FOR EVERY APPLICATION
Lightpath
Cell
Volume Qty.
Outside Dim.
HxWxD
Part No.
®
NIR Quartz SUPRASIL 300
PerkinElmer Cells Ensure
Top Optical Performance,
with High Cell Transmission
and Accurate Pathlength
1 mm*
45 x 12.5 x 3.5 mm
350 µL
2
B0631013
5 mm
45 x 12.5 x 7.5 mm
1.75 mL
2
B0631014
10 mm
45 x 12.5 x 12.5 mm
3.5 mL
2
B0631015
20 mm
45 x 12.5 x 22.5 mm
7.0 mL
2
B0631016
50 mm
45 x 12.5 x 52.5 mm
17.5 mL
1
B0631017
No matter what type of cells your application requires —
rectangular or cylindrical, standard or short path, micro, semimicro or flowcells — choosing only high quality, precision cells
allows you to make full use of the accuracy and sensitivity of your
optical instrument.
100 mm
45 x 12.5 x 102.5 mm 35.0 mL
1
B0631018
3.5 mL
4
B0631134
1 mm*
45 x 12.5 x 3.5 mm
350 µL
2
B0631007
The cell windows are fused to the bodies by a special process
which avoids deformation of the windows. This assures that the
full width of the cell is usable and the finished cell dimensions are
maintained.
5 mm
45 x 12.5 x 7.5 mm
1.75 mL
2
B0631008
10 mm
45 x 12.5 x 12.5 mm
3.5 mL
2
B0631009
20 mm
45 x 12.5 x 22.5 mm
7.0 mL
2
B0631010
50 mm
45 x 12.5 x 52.5 mm
17.5 mL
1
B0631011
Our cells are manufactured from various types of glass. We offer
three basic materials: Special Optical Glass, SUPRASIL® UV Quartz
and SUPRASIL 300 NIR Quartz, in all the common sizes and types.
The most important criterion for the choice of a particular type
of glass is the spectral range for which the cell is intended. Color
logos are fused onto each PerkinElmer cell, thus indicating the
spectral range over which the cell can be used.
100 mm
45 x 12.5 x 102.5 mm 35.0 mL
1
B0631012
Special Optical Glass
Indicates that SCHOTT type UK 5 is used for cells referred to in the
catalog as manufactured from “Special Optical Glass”. This crown
glass is made from exceptionally pure raw materials, which gives
an improved transmission in the near ultraviolet range. An empty
cell will give a transmission of more than 80% over a spectral
range of between 320 and 2,500 nm.
SUPRASIL UV Quartz
Indicates that quartz of the highest purity and homogeneity has
been used for the window. Because it is produced from a silicon
compound, it is also called synthetic quartz. SUPRASIL gives
transmission values of more than 80% over a spectral range of
between 200 and 2,500 nm for an empty cell.
Optical Glass 360-2,500 nm without lid
10 mm
45 x 12.5 x 12.5 mm
Quartz SUPRASIL
Special Optical Glass
1 mm*
45 x 12.5 x 3.5 mm
350 µL
2
B0631001
5 mm
45 x 12.5 x 7.5 mm
1.75 mL
2
B0631002
10 mm
45 x 12.5 x 12.5 mm
3.5 mL
2
B0631003
20 mm
45 x 12.5 x 22.5 mm
7.0 mL
2
B0631004
50 mm
45 x 12.5 x 52.5 mm
17.5 mL
1
B0631005
100 mm
45 x 12.5 x 102.5 mm 35.0 mL
1
B0631006
*Glass lid.
Macro with PTFE Stopper
Lightpath
Outside Dim.
HxWxD
Cell
Volume Qty.
Part No.
NIR Quartz SUPRASIL 300
1 mm
52 x 12.5 x 3.5 mm
350 µL
2
B0631031
5 mm
46 x 12.5 x 7.5 mm
1.75 mL
2
B0631032
10 mm
46 x 12.5 x 12.5 mm
3.5 mL
2
B0631033
20 mm
46 x 12.5 x 22.5 mm
7.0 mL
2
B0631034
50 mm
46 x 12.5 x 52.5 mm 17.5 mL
1
B0631035
100 mm
46 x 12.5 x 102.5 mm 35.0 mL
1
B0631036
Quartz SUPRASIL
1 mm
52 x 12.5 x 3.5 mm
350 µL
2
B0631025
SUPRASIL 300 NIR Quartz
5 mm
46 x 12.5 x 7.5 mm
1.75 mL
2
B0631026
Denotes a synthetic quartz that is free from OH absorption.
Therefore it is suitable for applications in the near infrared range
up to approximately 4,000 nm. SUPRASIL 300 gives a transmission
of more than 80% over a spectral range of between 200 and
3,500 nm for an empty cell.
10 mm
46 x 12.5 x 12.5 mm
3.5 mL
2
B0631027
20 mm
46 x 12.5 x 22.5 mm
7.0 mL
2
B0631028
50 mm
46 x 12.5 x 52.5 mm 17.5 mL
1
B0631029
100 mm
46 x 12.5 x 102.5 mm 35.0 mL
1
B0631030
Macro Cells
1 mm
48 x 12.5 x 3.5 mm
350 µL
2
B0631019
5 mm
46 x 12.5 x 7.5 mm
1.75 mL
2
B0631020
10 mm
46 x 12.5 x 12.5 mm
3.5 mL
2
B0631021
50 mm
46 x 12.5 x 52.5 mm 17.5 mL
1
B0631023
Standard rectangular macro cells are the most frequently-used
type of spectroscopy cell for routine liquids analysis. Each cell has a
standard inside width of 9.5 mm and a base thickness of 1.5 mm.
184
Macro with PTFE Lid
MATERIALS CHARACTERIZATION: UV/VISIBLE
Special Optical Glass
SEMI-MICRO, MICRO, ULTRA-MICRO CELLS
Semi-micro Cells
Micro Cells
Semi-micro cells have the same outside dimension as
the Macro cells but the cell walls have been thickened
slightly, limiting the interior sample chamber width to
4 mm. Each cell has a base thickness of 3.2 mm and
each package contains two cells.
Micro cells have the same outside dimension
as the Macro cells but the cell walls have
been thickened, limiting the interior sample
chamber width to 2 mm. Each cell has a
standard light path of 10 mm and each
package contains two cells.
Semi-micro with PTFE Lid – Black Sides
Micro with PTFE Lid - Black Sides
Lightpath
Outside Dim.
HxWxD
Cell
Volume
Part No.
Outside Dim.
H x W x Dt
Base
Thickness
Cell
Volume
Part No.
3.2 mm
700 µL
B0631071
3.2 mm
700 µL
B0631070
®
NIR Quartz SUPRASIL 300
Quartz SUPRASIL
5 mm
45 x 12.5 x 7.5 mm
700 µL
B0631050
45 x 12.5 x 12.5 mm
10 mm
45 x 12.5 x 12.5 mm
1.4 mL
B0631051
Special Optical Glass
Quartz SUPRASIL
45 x 12.5 x 12.5 mm
5 mm
45 x 12.5 x 7.5 mm
700 µL
B0631048
10 mm
45 x 12.5 x 12.5 mm
1.4 mL
B0631049
Micro with PTFE Stopper - Black Sides
Special Optical Glass
Cell
Volume
Part No.
1.5 mm
400 µL
B0631078
1.5 mm
400 µL
B0631077
1.5 mm
400 µL
B0631076
Base
Thickness
5 mm
45 x 12.5 x 7.5 mm
700 µL
B0631046
Outside Dim.
H x W x Dt
10 mm
45 x 12.5 x 12.5 mm
1.4 mL
B0631047
NIR Quartz SUPRASIL 300
40 x 12.5 x 12.5 mm
Semi-micro with PTFE Lid – Clear Sides
Lightpath
Outside Dim.
HxWxD
Cell
Volume
Part No.
45 x 12.5 x 22.5 mm
2.8 mL
B0631045
2.8 mL
B0631042
2.8 mL
B0631039
Quartz SUPRASIL
20 mm
45 x 12.5 x 22.5 mm
45 x 12.5 x 22.5 mm
Semi-micro with PTFE Stopper – Black Sides
Lightpath
Outside Dim.
HxWxD
Cell
Volume
Part No.
5 mm
46 x 12.5 x 7.5 mm
700 µL
B0631065
10 mm
46 x 12.5 x 12.5 mm
1.4 mL
B0631066
Lightpath
Aperture
Chamber
Volume
Part No.
Quartz SUPRASIL
Quartz SUPRASIL
46 x 12.5 x 12.5 mm
Ultra-micro cells use a narrower sample
chamber, raising it directly into the center
of the light path and masking it with
black quartz. One cell with light path
40 x 12.5 x 12.5 mm.
Ultra-micro with PTFE Lid
NIR Quartz SUPRASIL® 300
10 mm
Special Optical Glass
Ultra-micro Cells
Special Optical Glass
20 mm
40 x 12.5 x 12.5 mm
40 x 12.5 x 12.5 mm
NIR Quartz SUPRASIL 300
20 mm
Quartz SUPRASIL
1.4 mL
B0631064
700 µL
B0631061
10 mm
2 x 1.5 mm
30 µL
B0631079
Special Optical Glass
5 mm
46 x 12.5 x 7.5 mm
Ultra-micro with Pipette Tips
Semi-micro with PTFE Stopper – Clear Sides
Lightpath
Outside Dim.
HxWxD
Lightpath
Cell
Volume
Part No.
2.8 mL
B0631060
2.8 mL
B0631057
NIR Quartz SUPRASIL 300
20 mm
46 x 12.5 x 22.5 mm
Quartz SUPRASIL
20 mm
46 x 12.5 x 22.5 mm
www.perkinelmer.com/supplies
Aperture
Chamber
Volume
Part No.
Quartz SUPRASIL
0.1 mm
1 x 5 mm
0.5 µL
B0631082
1 mm
1 x 5 mm
5 µL
B0631083
5 mm
Ø 0.8 mm
2.5 µL
B0631080
10 mm
Ø 0.8 mm
5 µL
B0631081
185
CYLINDRICAL AND FLOW-THROUGH CELLS
Cylindrical Cells – Macro with PTFE Stopper
Cylindrical cells are used with spectrophotometers that have a larger, circular light beam. Each cell has an outside diameter of 22 mm
and an inside diameter of 19 mm. Each package contains one cell and two windows.
Material
Outside
Depth
Cell
Volume
Remarks
Part No.
10 mm
12.5 mm
2.8 mL
Neck Ø 6 mm Taper 1:10
B0631099
20 mm
22.5 mm
5.6 mL
Neck NS 7
B0631100
50 mm
52.5 mm
14.0 mL
2 necks NS 7
B0631101
100 mm
102.5 mm
28.0 mL
2 necks NS 7
B0631102
10 mm
12.5 mm
2.8 mL
Neck Ø 6 mm Taper 1:10
B0631095
20 mm
22.5 mm
5.6 mL
Neck NS 7
B0631096
50 mm
52.5 mm
14.0 mL
2 necks NS 7
B0631097
100 mm
102.5 mm
28.0 mL
2 necks NS 7
B0631098
Lightpath
NIR Quartz SUPRASIL® 300
Quartz SUPRASIL
NIR Quartz SUPRASIL Cylindrical
Cells Macro with PTFE Stopper,
10 mm Part No. B0631099
Special Optical Glass
10 mm
12.5 mm
2.8 mL
Neck Ø 6 mm Taper 1:10
B0631091
20 mm
22.5 mm
5.6 mL
Neck NS 7
B0631092
50 mm
52.5 mm
14.0 mL
2 necks NS 7
B0631093
100 mm
102.5 mm
28.0 mL
2 necks NS 7
B0631094
Flow-through Cells
Flow-through cells are used for measuring samples with continuous flow or with Sippers where individual samples are aspirated into the
cell. All cells have center heights of 15 mm. Each package contains one cell with two clear windows. The cells listed below are Compact
with two screw connectors, M6 x1 and 500 mm length FEP tubing - 1.9 mm o.d., 1.1 mm i.d.
Centre
Height
Outside
Depth
Aperture
Quartz SUPRASIL
1 mm
15 mm
35 x 12.5 x 12.5 mm
17.5 x 3.5 mm
62 µL
B0631085
Quartz SUPRASIL
10 mm
15 mm
35 x 12.5 x 12.5 mm
11 x 3.5 mm
390 µL
B0631084
Quartz SUPRASIL
10 mm
15 mm
35 x 12.5 x 12.5 mm
8 x 2 mm
160 µL
B0631087
Quartz SUPRASIL
10 mm
15 mm
35 x 12.5 x 12.5 mm
11 x 2.5 mm
300 µL
B0631150
Quartz SUPRASIL
10 mm
15 mm
35 x 12.5 x 12.5 mm
Ø 3 mm
80 µL
B0631089
Quartz SUPRASIL
50 mm
15 mm
45 x 12.5 x 52.5 mm
Ø 3 mm
370 µL
B0631088
Quartz SUPRASIL
10 mm
15 mm
35 x 12.5 x 12.5 mm
Ø 2 mm
30 µL
B0631090
Quartz SUPRASIL (FIAS)
10 mm
15 mm
35 x 12.5 x 12.5 mm
Ø 1.5 mm
18 µL
B0631151
Quartz SUPRASIL (FIAS)
10 mm
15 mm
35 x 12.5 x 12.5 mm
Ø 1 mm
8 µL
B0631152
Lids and Stoppers
Description
186
Cell
Volume
Lightpath
Material
Part No.
Replacement Tubing
Lightpath
Part No.
Glass Covering Plate
1 mm
B0631144
PTFE Fitted Lid
5 mm
B0631145
PTFE Fitted Lid
10 mm
B0631129
PTFE Fitted Lid
20 mm
B0631146
PTFE Fitted Lid
50 mm
B0631147
Glass Fitted Lid
100 mm
B0631148
PTFE Stopper with NS 7 Fitting
B0631128
PTFE Stopper with Fitting Ø 6, taper 1:10
B0631149
MATERIALS CHARACTERIZATION: UV/VISIBLE
Description
Part No.
FEP-Replacement Tubing with one short screw fitting,
500 mm long
B0631130
FEP-Replacement Tubing with one long screw fitting,
500 mm long
B0631131
Sipper Tubing to Cuvette (in)
B2500129
Sipper Tubing to Cuvette (out)
B2500127
DISPOSABLE CELLS
Micro Cells
Outside
Dimensions
Cell
Volume
Qty.
Part No.
UV Material
45 x 12.5 x
12.5 mm
70 – 550 μL
100
L7110260
UV Material
45 x 12.5 x
12.5 mm
70 – 550 μL
500
L7110261
UV Material
Individually
Wrapped*
45 x 12.5 x
12.5 mm
70 – 550 μL
100
L7110262
Caps - Blue
100
L7110264
Caps - Yellow
100
L7110265
Caps - Green
100
L7110266
Caps - Orange
100
L7110267
Description
Disposable cells greatly reduce the risk of contamination, remove
the need for cleaning reagents and lower laboratory costs as
compared to quartz or glass cells.
Disposable cells are available in polystyrene and polymethyl
methacrylate either as macro or semi-micro cells. Additionally,
disposable cells are available in a special UV transparent material
in macro, semi-micro and micro cells. The useful spectral range
for UV material is between 220 and 900 nm, for polymethyl
methacrylate it is 300 and 900 nm and for polystyrene it is
340 and 900 nm.
Each cell has a standard light path of 10 mm and is suitable for
any UV/Vis Spectrophotometer which accommodates cells with a
center height of 15 mm.
Color coded caps can be ordered for the micro UV transparent
cells which allow samples to be stored down to -20 °C.
Semi-micro Cells
Outside
Dimensions
Cell
Volume
Qty.
Part No.
UV Material
45 x 12.5 x
12.5 mm
1.5 – 3.0 mL
100
L7110268
Polystyrene
45 x 12.5 x
12.5 mm
1.5 – 3.0 mL 1,000
L7110272
Polymethyl
Methacrylate
45 x 12.5 x
12.5 mm
1.5 – 3.0 mL 1,000
L7110274
Description
Cell Rack
Macro Cells
Outside
Dimensions
Cell
Volume
Qty.
Part No.
UV Material
45 x 12.5 x
12.5 mm
2.5 – 4.5 mL
100
L7110269
Polystyrene
45 x 12.5 x
12.5 mm
2.5 – 4.5 mL 1,000
L7110271
Polymethyl
Methacrylate
45 x 12.5 x
12.5 mm
2.5 – 4.5 mL 1,000
L7110273
Description
* Free of DNase, DNA and RNase
Also available is a cell rack for easy storage of samples. It is
suitable for standard 10 mm light path cells and holds up to 16
cells in numbered positions to aid sample tracking. The cell rack
can withstand temperatures up to 121 °C so it can be used in
an Autoclave.
Description
Cell Rack, 16 cell capacity
www.perkinelmer.com/supplies
Qty.
1
Part No.
L7110275
187
CELL HOLDERS
To extend the range of samples that you can analyze, we offer a
wide range of sample holders.
The rectangular and cylindrical long-path cell holders are ideal
for sensitive measurements on dilute samples where the extra
pathlength is important. For the chemist, the test-tube holder
provides a convenient method of sampling in-situ without having
to decant the sample into standard cells.
Finally, extend your measurement capabilities to include solid
materials with the solid and variable-angle sample holders.
MAXIMIZE SAMPLING
FLEXIBLITY
Solid Sample Holder
Minimum sample size 10 x 15 mm. Maximum sample
thickness 5 mm.
Description
Part No.
Solid Sample Holder
B0080822
Test Tube Holder
Standard Cell Holder
Rectangular Long-path Cell Holder
This holder accommodates test tubes from 11 to 17 mm diameter.
Description
Part No.
Test Tube Holder
B0500952
Variable Angle Sample Holder
0° to 60° for sample position for measurement in transmission
of filter glasses and other transparent samples. Minimum sample
size is 30 x 40 mm.
Description
Part No.
Variable Angle Sample Holder
B0152471
Standard Cell Holder
The Standard Cell Holder is provided as standard equipment with
your PerkinElmer LAMBDA Series instrument. A lifter (included)
makes short cell removal easy. It accommodates a large selection
of rectangular cells up to 10 mm pathlength. The Standard Cell
Holder is adjustable both vertically and horizontally.
Description
Part No.
Standard Cell Holder
B0505071
Rectangular Long-path Cell Holder
The Rectangular Long-path Cell Holder accepts cells with
pathlengths from 10 to 100 mm. This optional cell holder is easy
to install and has the same footprint as the Standard Cell Holder. It
is designed for a precise fit and gives you maximum reproducibility.
Description
Part No.
For LAMBDA 1X/2X/3X/4X/6XX/8XX/9XX/10XX/Bio
B0080821
Cylindrical Long-path Cell Holder
Test Tube Holder
Cylindrical Long-path Cell Holder
188
Variable Angle Sample Holder
Solid Sample Holder
MATERIALS CHARACTERIZATION: UV/VISIBLE
The Cylindrical Long-path Cell Holder accommodates cells with
outside diameters from 22 to 30 mm. A versatile cell holder, it
accepts cells with pathlengths up to 100 mm. The spring loaded
clamping arms provide a precise, reproducible fit and are easy
to adjust.
Description
Part No.
Cylindrical Long-path Cell Holder
C0550303
CELL CHANGERS
5+5 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
Automatic linear 5+5 cell changer for long pathlength cells up
to 50 mm. Includes: Automatic Linear Transport (B2000186),
Reference Kit (B2000310), and two Long Pathlength 5-Cell
Holders (B0089439). No accessory PCB required.
Description
Part No.
5+5 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
N1010569
8+1 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
Automatic water thermostattable linear cell changer for eight
samples and one reference. Includes: Automatic Linear Transport
(B2000186), 8-Cell Holder Water Thermostattable (B2205411),
and Water Thermostattable Reference Cell Holder (B2000201). No
accessory PCB required.
Description
Part No.
8+1 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
N1010567
8+8 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
Automatic water thermostattable linear cell changer for eight
samples and eight references. Includes: Automatic Linear Transport
(B2000186), Reference Kit (B2000310), and two 8-Cell Holders
(B2205411). No accessory PCB required.
Description
Part No.
8+8 Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
N1010568
13-Cell Changer System for LAMBDA 1X/2X/3X/4X/Bio
Includes cell changer and one carousel each for glass/quartz and
plastic cuvettes. Accessory PCB (L6000500) required for LAMBDA
25/35/45, or PCB (B0509681) required for LAMBDA 10/20/40/Bio,
but not included.
Description
Part No.
13-Cell Changer System for LAMBDA 1X/2X/3X/4X/Bio
B0185210
Automatic Linear Transport for LAMBDA
1X/2X/3X/4X/Bio
Automatic linear transport unit. Can be combined with 8-Cell
Holder, Water Thermostattable (B2205411), Long Pathlength
5-Cell Holders (B0089439), or Research Peltier System (L6310011).
For reference position, Reference Kit (B2000310) and 5- or 8-Cell
Holder recommended, but not included. Water Thermostattable
Reference Cell Holder (B2000201) can be used alternatively.
Description
Part No.
Automatic Linear Transport for LAMBDA
1X/2X/3X/4X/Bio
B2000186
Reference Kit
For Automatic Linear Transport (B2000186). For reference position
to be used with 8-Cell Holder, Water Thermostattable (B2205411)
or Long Pathlength 5-Cell Holder (B0089439).
Description
Part No.
Reference Kit
B2000310
Gel-Scanner Linear Transport for Gels and Glasses for
LAMBDA 1X/2X/3X/4X/Bio
Complete Gel-Scanner accessory. Allows measurement of
100 mm gel cuvettes or glass samples up to 100 mm pathlength
in continuous or random access mode. No accessory PCB required.
For gel measurement, Gel Cell (B0107047) is required, but
not included.
Description
Part No.
Gel-Scanner Linear Transport for Gels and Glasses for
LAMBDA 1X/2X/3X/4X/Bio
B2000199
Gel Cell, Glass
For gel measurements with Gel-Scanner Linear Transport
(B2000199). Dimensions are 6 mm pathlength by 100 mm width
by 10 mm height.
Manual Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
Description
Part No.
Base unit to be used with cell holder of choice. Includes Accessory
Cover (B0094014). Requires, but does not include, Long
Pathlength 5-Cell Holder (B0089439) or 8-Cell Holder, Water
Thermostattable (B2500081).
Gel Cell, Glass
CP183700
Description
Part No.
Manual Cell Changer for LAMBDA 1X/2X/3X/4X/Bio
B2500080
www.perkinelmer.com/supplies
189
THERMOSTATTING ACCESSORIES
FAST, EFFICIENT,
TEMPERATURE-CONTROL
Routine Peltier Single Sample Accessory
Peltier temperature controlled single cell holder for the sample
position. Also included are a reference position cover, power
supply, power cables, and User’s Guide. Selectable temperature
range 20° to 45 °C. Requires the LAMBDA 25, 35, 45 Accessory
Board (L6000500).
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B2000159
Routine Peltier 9-Sample Position Accessory
Includes the Peltier 9 position cell changer, 5 beam masks,
alignment gauge, reference position cover, sample compartment
extension, power supply, power cables, and User’s Guide. Must
be service installed. Selectable temperature range 20° to 45 °C.
Requires the LAMBDA 25, 35, 45 Accessory Board (L6000500).
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B2000160
Routine Peltier Single Reference Accessory
Peltier temperature controlled single cell holder for the reference
position Also included are the power supply, power cables, and
User’s Guide. Selectable temperature range 20° to 45 °C. Requires
the LAMBDA 25, 35, 45 Accessory Board (L6000500).
Routine Peltier Systems
Routine Peltier System – Single Sample Accessory +
Single Reference Accessory
Includes the Peltier Single Sample Accessory (B2000159) for the
sample position and the Single Reference Accessory (B0510412)
for the reference position. Also included are a reference position
cover, power supply, power cables, and User’s Guide. Selectable
temperature range 20° to 45 °C. Requires the LAMBDA 25, 35, 45
Accessory Board (L6000500).
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
N1010565
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B0510412
9-Postion Cell Holder
As included with the Peltier 9-Sample Position Accessory.
Additional interchangeable cell holder for use with the 9-position
cell changer.
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B0510366
Stirring Rods Set of 15 pieces for stirring in the cuvette.
Routine Peltier System – 9-Sample Position Accessory +
Single Reference Accessory
Includes the Peltier 9-Sample Position Accessory for the sample
position and the Single Reference Accessory for the reference
position. Also included are 5 beam masks, alignment gauge,
reference position cover, sample compartment extension, power
supply, cables, and User’s Guide. Selectable temperature range
20° to 45 °C. Must be service installed. Requires the LAMBDA 25,
35, 45 Acessory Board (L6000500).
190
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
N1010566
MATERIALS CHARACTERIZATION: UV/VISIBLE
For use with the Research Peltier System-6 Position (PTP-6)
(L6310011), and 13-Cell Changer Systems (B0185210), and
Magnetic Stirrer Accessory (B0507355 and B0510070).
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B0187028
THERMOSTATTING ACCESSORIES
PTP-A Single-cell Air-cooled Peltier Accessory
Research Peltier Systems
The PTP-A Single-cell Peltier Accessory is air-cooled and does not
require a source of cooling water, making it very convenient to use
with minimal setup time. Temperature programs are set up, edited
and stored from the front panel of the controller unit.
The PTP-A is ideal for protein and nucleic assays to 37 °C and for
many studies of kinetics, thermodynamics and acid-base equilibria.
Description
Part No.
PTP-A Single-cell Air-cooled Peltier System
L6310014
Water-thermostatted Single-cell Holder
A single-cell holder with 3 mm fluid tubing connectors to enable
fluid circulated temperature stabilization. Can be installed in the
reference position with the PTP-1 and PTP-6 to allow the reference
sample to be temperature controlled. Requires, but does not
include, a fluid circulator.
Description
Part No.
Water-thermostatted Single-cell Holder
B0080819
PTP 1+1 and PTP 6+6
Research Peltier Systems
The research Peltier range of accessories is ideal for any
application that requires precise control of temperature
at, below or above ambient temperature. The ability to
operate up to 100 °C allows applications such as DNA
melting, protein denaturation and some polymer studies to
be performed.
These accessories consist of Peltier-controlled, single or six-cell
cuvette holders for the sample and reference channels. Singlechannel versions are also available. The accessory includes incuvette stirring and the ability to preset temperature programs.
These units require a source of cooling water.
Description
Part No.
PTP-1 Research Peltier System
L6310010
PTP 1+1 Research Peltier System
L6310012
PTP-6 Research Peltier System*
L6310011
PTP 6+6 Research Peltier System*
L6310013
*For the PTP-6 and 6+6 the sample and reference cell holders must be fitted to the baseplate of the cell changer
unit in the sample compartment. In a Lambda 25, 35 or 45 this is the Automatic Linear Transport (B2000186),
while in a Lambda 650, 850, 950 or 1050 the Linear Cell Programmer (B2205401) is required.
Temperature-measurement Kit
Peltier Controlled Fluid Circulator (PCB-150)
Temperature-measurement Kit
Probe for measuring the temperature within the cell.
Includes glass cell. Requires the LAMBDA 25, 35, 45
Accessory Board (L6000500).
Description
Part No.
Temperature-measurement Kit
B0185227
An external fluid circulator for use with all thermostatted cell holders enabling peltier
effect temperature control. With both heating and cooling ability the circulator provides a
temperature range of 20° to 60 °C with an accuracy of +/- 0.1 °C. Also included is a serial
port and documentation to enable PC programming.
Description
Part No.
Peltier Controlled Fluid Circulator (PCB-150)
N1015158
Water Circulator
Electronic temperature control, continuously settable from 32° to 60 °C, temperature
stability +/- 0.2 °C, with precision thermometer and built-in cooling coils.
www.perkinelmer.com/supplies
Description
Part No.
Water Circulator, 110 V/60 Hz
N9302736
191
SPECULAR RELFLECTANCE ACCESSORIES
Relative Specular Reflectance Accessories
For reflectance or thickness measurements. 6° angle of light
incidence. For Lambda 25/35/45/650/750/850/950/1050.
Relative Specular Reflectance Accessory, 6°
Features and Benefits
The Fully-automated Universal
Reflectance Accessory (URA)
PerkinElmer’s unique Universal Reflectance Accessory (URA) is the
only fully-automated, multi-angle, absolute specular reflectance
accessory available today. For the Lambda 650/850/950/1050.
Simply place the sample on the horizontal sampling plate, select
the required measurement angles with a few mouse clicks and
scan. Unlike traditional methods, the URA automatically and
reproducibly changes the measurement angle, eliminating timeconsuming manual mirror adjustments and changes of accessory.
This approach reduces running costs and increases productivity.
The URA snaps into place in the second sampling position and
can quickly be interchanged with integrating spheres and other
detector modules.
• Locates in the standard sample compartment for routine relative
reflectance measurements at a 6° fixed angle of incidence
• Accommodates samples from 20 x 20 mm to 100 x 100 mm
• Wavelength range: 175 – 3,300 nm
Description
Part No.
Relative Specular Reflectance Accessory
B0086703
Variable-Angle Relative Specular
Reflectance Accessory
For relative specular reflectance studies which require data from
more than one angle of incidence, the variable angle accessory
is ideal. The angular range is from 15 to 70° with an accuracy
of +/- 1°. Typical applications include the study of the how the
reflectivity of a sample changes with change of incident angle.
For the Lambda 25/35/45/650/750/850/950/1050.
Features and Benefits
• Measurement range: 190 – 3,100 nm (UV/Vis/NIR),
190 – 900 nm (UV/Vis)
Features and Benefits
• Angular range: 8 – 68° incident angle
• Locates in standard sample compartment
• Depolarization recommended for angles >15°
• Range of angles: 15 – 70°
• Measure separate S&P polarizations using the Double
Depolarizer Drive (B0505530)
• Absolute and relative measurements can be made
• Typical applications include the measurement of anti-reflection
coatings, high-reflectors, coating thickness and metallic reflectors
Description
Part No.
URA* (UV/Vis only)
L6020208
URA* (UV/Vis/NIR)
L6020202
URA (UV/Vis/NIR) for LAMBDA 1050 only
L6020358
*Not available for the LAMBDA 750
• Wavelength range: 175 – 3,300 nm
Description
Part No.
Variable-Angle Relative Specular Reflectance Accessory
B0137314
Spare Standard Mirror
For Relative Specular Reflectance Accessory, 6° (B0086703) and
Variable Angle Reflectance Accessory (B0137314). This mirror is
not calibrated.
Description
Part No.
Spare Standard Mirror
B0071519
Powder Sample Holder Set
For measurement of powder samples.
192
MATERIALS CHARACTERIZATION: UV/VISIBLE
Description
Part No.
Powder Sample Holder Set
PELA9040
INTEGRATING SPHERES
Accessories for LAMBDA
150 mm Integrating Spheres
Center Mounted Sample Holder, Clip Style
Clip style for films and paper samples.
LAMBDA Model
Part No.
6XX/8XX/9XX/10XX
PELA9039
Center Mounted Sample Holder, Jaw Style
Jaw style for solid samples like glasses, prisms, etc.
150 mm Integrating Sphere
LAMBDA Model
Part No.
6XX/8XX/9XX/10XX
PELA9038
Cell Holder
Snap-in Integrating Spheres for Lambda
650/750/850/950/1050
PerkinElmer’s range of snap-in integrating spheres is the industry
standard for the measurement of total reflectance, diffuse
reflectance and diffuse transmittance measurements for a
huge range of sample types. The 150 mm Integrating Sphere
is the recommended accessory for measurement of total solar
reflectance and transmittance in the glass industry and for the
measurement of UV transmittance of paint films in the automotive
industry. Many national laboratories use it in R&D studies and for
calibration measurements.
The 60 mm Integrating Sphere is used for routine diffuse
reflectance and diffuse transmittance measurements. The
detector sphere comprises a 60 mm Spectralon detector sphere
contained in a snap-in module which fits into the second
sample compartment position. This leaves the primary sample
compartment free for the use of accessories such as the V-N
absolute reflectance accessories, transmission sample holders and
polarizer/depolarizer drive.
Features and Benefits
• Measurement range: 200 – 2,500 nm (UV/Vis/NIR), 200 – 900
(UV/Vis)
• InGaAs versions offer higher sensitivity in the near-IR range
• Sampling modes include total and diffuse reflectance at an
incident angle of 8°, and total and diffuse transmittance at normal
(0°) incidence
Description
Part No.
150 mm Integrating Sphere*
L6020204
60 mm Integrating Sphere
L6020203
60 mm Detector Sphere*
L6020209
150 mm InGaAs Integrating Sphere*
L6020322
60 mm InGaAs Integrating Sphere*
L6020323
For measurement in 1 cm cuvettes in transmission or reflectance mode.
LAMBDA Model
Part No.
6XX/8XX/9XX/10XX
C6951019
Small Spot Accessory Kit
Lens kit for reducing beam size to the transmittance position, to the center
mount and to the diffuse reflectance position. Requires Reflectance Aperture
Kit, Part No. L6020314.
LAMBDA Model
Part No.
6XX/8XX/9XX/10XX
L6020211
Reflectance Only Small Spot Kit
Lens kit for reducing beam size to the reflectance position. Requires Sample
Compartment Iris, Part No. L6020316.
LAMBDA Model
Part No.
6XX/8XX/9XX/10XX
L6020313
50 mm Integrating Sphere
for Lambda 35
Simplifies analysis of a wide variety
of samples, including solids,
powders, pastes and liquids. For
scattered transmittance and diffuse
reflectance measurement. Spectralon
coated, wavelength range 250 to 1,100 nm.
LAMBDA Model
Part No.
35
C6951014
Accessories for LAMBDA 35 Integrating Spheres
Description
Part No.
1.25” Calibrated Spectralon Diffuse
Reflectance Standard
PELA9057
Powder Sample Holder Set
PELA9040
*Not available for the LAMBDA 750.
www.perkinelmer.com/supplies
193
POLARIZERS, DEPOLARIZERS, SIPPER
PRECISE TRANSMISSION
AND REFLECTANCE
MEASUREMENTS
Double Polarizer drive for LAMBDA
650/750/850/950/1050
The Double Polarizer Drive requires, but does not include,
one or two of the following polarization elements:
Polarizer/Depolarizer Elements
for the Double Polarizer Drive
A range of polarizing materials is available, according to the
required wavelength range. For equal energy in the sample and
reference beams of the spectrometer, two are required.
Description
Wavelength Range
Part No.
Film Polarizer
400 – 700 nm
B2205022
High Performance
Polarizer Crystal
300 – 2,600 nm
B0505284
Glan-Taylor Polarizer Crystal
210 – 1,000 nm
N1010520
Depolarizer Crystal
(98% efficiency)
190 – 2,600 nm
B2205021
Common-beam Depolarizer
When samples are oriented and polarize incident light, it is
important to correct for the inherent polarizing effect of the
spectrometer’s optics by using a depolarizer. Another important
application is to make measurements using a specific orientation of
incident radiation e.g. for crystalline materials and polymers.
Another approach to depolarization involves the use of a software
controlled depolarizer inside the spectrometer. Driven by a stepper
drive, and controlled by UV WinLab™ software, the Common-beam
Depolarizer operates between 190 and 2,600 nm uses a doublewedge quartz/Suprasil design for 92% depolarization efficiency.
Service installation is required.
Description
Part No.
Common Beam Depolarizer
B0501282
Sipper
Features and Benefits
Peristaltic Sipper “PESI”
• Measurement range (Depolarization): 185 – 2,600 nm
• Measurement range (with Polarizers): 400 – 700 nm (Film),
300 – 2,600 nm (Glan-Thompson), 210 – 1,000 nm (Glan-Taylor)
• Fits into standard sample compartment alongside reflectance
accessories and transmittance sample holders
• Suitable for reflectance and transmittance measurements
The high performance Double Polarizer/Depolarizer Drive is
installed in the primary sample compartment. The polarization/
depolarization orientation can be fully automated, changed
by a scan at a fixed wavelength or with a stepping mode.
Resolution of 0.25° for scanning. The polarization (depolarization)
orientation in the stepping mode can be changed at up to 20
wavelength positions. Applications include specular reflectance
studies of optics, coatings, metallic reflectors and thin films.
The Double Polarizer Drive can operate with the Universal
Reflectance Accessory or manual specular reflectance and
transmission accessories.
194
Description
Part No.
Double Polarizer drive for LAMBDA
650/750/850/950/1050
B0505530
MATERIALS CHARACTERIZATION: UV/VISIBLE
Sampling and purging time selectable from keyboard.
For LAMBDA 25/35/45/10/20/40 no accessory PCB necessary.
Requires, but does not include, accessory PCB for LAMBDA Bio 11,
12, and 14, (B0509681/B2190034) or accessory PCB for LAMBDA
18/19 (B0124984/B0116378).
For LAMBDA 6XX/8XX/9XX/10XX, requires, but does not include,
Installation Kit for LAMBDA 800/900 (B2500123) and Accessory
PC Board for LAMBDA 800/900 (B2205116).
Requires, but does not include, Flowcell of choice with
screw connector.
Description
Part No.
Peristalic Sipper PESI
B2190036
FIBER OPTICS AND GENERAL PURPOSE OPTICAL BENCH
FIBER OPTICS ACCESSORIES
GENERAL PURPOSE OPTICAL BENCH KITS FOR THE
LAMBDA 6XX/8XX/9XX/10XX
Sample Holder Mount Kit
Two cantilever sample holders with magnetic bases.
Description
Part No.
Sample Holder Mount Kit
PELA1005
Variable Angle Transmittance Sample Holder Kit
Transfer-Optic for 1X/2X/3X/4X/Bio Part No. B0509546
Transfer-Optic for Mono-Fibers
Fiber optic transfer holder for LAMBDA spectrophotometers.
Requires pair of Mono-Fibers 2x2 or 2x10 meters and/or optrode.
Other optrodes available on request.
LAMBDA Model
Part No.
1X/2X/3X/4X/Bio
B0509546
650/850/950/1050
L6020290
800/900
B2205302
Holds samples at an accurately measured angle to the incident
beam for measurement of transmittance. Samples can be up to
1 cm thick and up to 10 cm square.
Description
Part No.
Variable Angle Transmittance Sample Holder Kit
PELA1006
Optical Bench Kit
Two magnetized mounted iris diaphragms on two optical rails
with mounts.
Description
Part No.
Optical Bench Kit
PELA1008
Pair of Mono-Fibers
Short Focal Length Mirror Kit, Spot Incidence
2x2 meters each.
Wavelength
Part No.
250 to 900 nm (UV/Vis)
B0196912
400 to 2400 nm (Vis/NIR)
B0509591
Fiber Optic Dip Probe
The Fiber Optic Dip Probe is a 15 mm, 316 grade stainless steel
probe with a wavelength of 200-1100 nm. Requires but does not
include: Transfer-Optic for Mono-Fibers, Light Shield (N1016074)
and one of the following Probe Tips: Probe Tip, 2 mm pathlength
(N1016073); Probe Tip, 5 mm pathlength (N1016072); or Probe
Tip, 10 mm pathlength (N1016071).
LAMBDA Model
Part No.
All
N1016070
Kit consists of a short focal length (20 to 30 mm) concave mirror
on an adjustable base with magnetic mounts to allow for small
spot incidence of curved samples.
Description
Part No.
Short Focal Length Mirror Kit, Spot Incidence
PELA1013
Beam Blocker Kit
Optical black beam blocker on adjustable base with
magnetic mounts.
Description
Part No.
Beam Blocker Kit
PELA1014
Fiber Optic Measurement Stage and Holder Kit
Includes two fiber optic holders to allow for measurement of small
diameter fibers and fixed apertures.
Light Shield
For use with Fiber Optic Dip Probe (N1016070).
LAMBDA Model
Part No.
All
N1016074
Description
Part No.
Fiber Optic Measurement Stage and Holder Kit
PELA1015
Probe Tip
For use with Fiber Optic Dip Probe (N1016070).
Pathlength
Part No.
2 mm
N1016073
5 mm
N1016072
10 mm
N1016071
www.perkinelmer.com/supplies
195
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement