null  User manual
Enviro‐Equipment Inc. 10120 Industrial Drive Pineville NC 28134 Stock#: EEI‐1292 Status: In Stock, Tested Dimensions: 8’ Wide, 6’ Long Tongue, 18’ Flat, 3’ Dove Tail, Weight Approx. 12,000 Pounds (Dry) Description: Mobile Dual Phase Extraction (MDPE), Aggressive Fluid Vapor Recovery (AFVR), Mobile Multiphase Extraction (MMPE) Unit. ‐
Refurbished Dekker Oil Sealed Liquid Ring Vmax Vacuum System o System Information:  Model: VMX0302KA1‐00  Serial: C16330  MFG. Date: 01/01 o Pump Information:  Pump was likely replaced at some point and not original to the system.  Pump Model: DV0300BKA3  SERIAL# 013904 o Reliance Electric Motor Information  20 Horsepower  230/460 Volt  50.8/25.4 Amps  1760 RPM  256TC Frame ‐
‐
‐
Enviro‐Equipment Inc. 10120 Industrial Drive Pineville NC 28134  ID No. Z25G5103‐8  HZ 60  Phase 3  Code G  Insulation Class F  TEFC  Continuous Duty  Service Factor 1.24  Ambient 40 Degrees C  Power Factor 80.6  Motor Weight 283 Pounds  Nema Nominal Efficiency 91% o ASCO Solenoid Valves  Model 8030G043V (Oil Circulation Valve)  Model EF8215B80 (Oxidizer High Temp Safety Valve) o 3” Galvanized Steel Exhaust Line with:  3/8” Ball Valve for Sample Port / Anemometer Readings  Dwyer LPG3‐D8442N Pressure Gauge  0‐55” WC Pressure  2.5” Face, ¼” NPT Back Connection  Dwyer BTB3257D Temperature Gauge  3” Dial, 2.5” Stem  50‐550F Range  Tee with Midwest Control 3” Brass Ball Valves FBB‐300 To Allow for Exhaust to Atmosphere Through Rain Cap or Connection to Oxidizer via 3” Aluminum Male Camlock Fitting Solberg Vacuum Inlet Filter o Model CSL‐235P‐300 o Replacement Element 235P o Connections 3” MNPT Vacuum Gauges – Total of 9 – 1x LRP, 1x Air filter, 1x KO Tank, 6x Manifold o Midwest Control Model VFSB25‐030  0‐30” HG Vacuum Range  2.5” Face, Liquid Filled, ¼” NPT Back Connection EEI Fabricated Knockout Tank o Model HVKO‐120‐500  2 Coats of Epoxy Paint Inside Tank, 1 Coat Epoxy 1 Coat UV Paint on Exterior  Amistco Stainless Steel Demister Pad 12” Thick  6” Flanged Cleanout Port  4” MNPT Inlet Connection, 4” FNPT Outlet Connection  2” Transfer Pump Connection with:  2” Brass Ball Valve Midwest Control FBB‐200  2” x 1.5” Reducer Coupling  1.5” Brass Wye Strainer Midwest Control YBS‐150 with 20 Mesh Screen  1.5” Brass Check Valve Midwest Control SCY‐150  1.5” Galvanized Union  ¾” Drain Line with Midwest Control FBB‐075 ¾” Brass Ball Valve  2” Clear PVC Sight Glass ‐
‐
‐
Enviro‐Equipment Inc. 10120 Industrial Drive Pineville NC 28134  FPI Sensors Level Float Tree  45 OAL, SS, 2 POLY DUST CAP, THREE LEVEL, 1010.6 FLOAT, SET COLLARS, CENTER DISK  L1‐43 NO, L2‐20 NO, L3‐17 NC  Fitting: 2” QD Poly Dust Cap, with ½” conduit connection  Stem: 5/16” SS, 45 OAL  Float: 1” x 1”, SS, .60 SG  Float Stops: SS set collars  L3: 17” NC blue  L2: 20” NO yellow  L1: 43” NO red  Switch: 50 watt, SPST  Wiring: 24” leads 22 ga,  Centering Disk‐1.5” PVC Moyno Progressive Cavity Transfer Pump o Pump Information:  Pump Model Number 35651  Order No. 3149777  MFG Date 01/15  Cast Iron Housing, SS Rotor, Viton Stator o Baldor Motor Information:  SPEC 35F606W206  HP 1.5  Volts 208‐230/460  Amps 5.3‐5/2.5  RPM 1725  Frame 145TCZ  HZ 60  Phase 3  Service Factor 1.15  Code K  Des B  Class B  TEFC o Outlet has 1.5” Brass Gate Valve Midwest Control BGV‐150 and 1.5” Stainless Steel Male Camlock o 1.5” Tanker Truck Camlock Hose connects to Flow Meter Assembly  Blancett B2600 Monitor  Blancett B111‐115, 1.5” Turbine Meter  0‐100 PSI Pressure Gauge  2” Male Camlock End Dilution Air Valve and Filter Assembly o Midwest Control 2” Brass Gate Valve BGV‐200 o Solberg Filter Silencer  Model FS‐30P‐250  Replacement Element 30P  2.5” MNPT Connection with 2.5 x 2” Reducer Coupling Vacuum Manifold ‐
‐
‐
‐
Enviro‐Equipment Inc. 10120 Industrial Drive Pineville NC 28134 o 3” Galvanized Steel Header with 6 Manifold Legs o 6x 2” Manifold Legs Each with:  2” Union  Midwest Control 2” Brass Ball Valve FBB‐200  Midwest control Vacuum Gauge Model VFSB25‐030  2” Male Aluminum Camlock Ends Diesel Generator o Multiquip Information:  Model DCA‐70USJ  Serial No. 8300015 o AC Generator Information:  Model DB‐831J2  Armature Connection Star with Neutral, Zigzag  Three Phase, 60HZ, 70KVA, 240/480V, 168/84.2 Amp, 0.8 PF  Single Phase, 60HZ, 40KW, 240/120V, 168 Amp, 1.0 PF o Engine Information:  John Deere Model 4045TF275  Type 4 cylinder 4 cycle  Rated Output 102HP, 1800 RPM  Displacement 4.5L  Fuel Tank 126 Gallons o Outlet Information  4x 120V 20 Amp Outlets with Breakers  3x 240/120V 50 Amp Outlets with Breakers Control Panel o 36x36x12 Nema 4 Enclosure o Hour Meters for Vacuum Blower and Transfer Pump o HOA Switches for Vacuum Blower and Transfer Pump o Alarm Lights Include:  Vacuum Blower High Temp – “Hi Temp”  Vacuum Blower High Oil Level – “Oil High Level”  Vacuum Blower Low Oil Level – “Oil Low Level”  Knockout Tank High Level – “KO High Level”  Product Storage Tank High Level – “PST High Level” o White Control Power Light o Black Alarm Reset Push Button o Red Emergency Stop Button o 100 Amp Non Fused Disconnect o Relay Logic with Intrinsically Safe Relays for Float Switches o Contactor/Overload/Circuit Breakers or Fuses for Vacuum Blower and Transfer Pump o Control Transformer o Sensaphone Cell 682 Telemetry Unit With Power Supply and Power Out Alert Hudson Deckover Trailer o Model HTMBH o VIN# 10HHTMBH5F2000017 o Tandem 7,000lb Axles o 8’ Wide, 6’ Tongue, 18’ Flat, 3’ Dove Tail, Wood Deck Interconnecting Hoses are 3” Tanker Truck Hoses with Aluminum Camlock Fittings Inlet Vacuum Filters
"CSL" Series 3” - 6” MPT
®
APPLICATIONS & EQUIPMENT
Vacuum Pumps & Systems – P.D., Side
Channel, Rotary Vane, Screw, Piston
Vacuum Packaging Equipment
Vacuum Furnaces
Blowers - Side Channel & P.D.
Intake Suction Filters
Pneumatic Conveying Systems
Remote Install for Piston, Screw
& Centrifugal Compressors
Factory Automation Equip
Ash Handling
Food Industry
Paper Processing
Glass, Ceramic Processing
Waste Water Treatment
Woodworking
Cement
Bag House Systems
Envelope Manufacturing
Medical Industry
Chemical Processing
FEATURES & SPECIFICATIONS
Vacuum level: Typically 1x10-3 mmHg (1.3x10-3 mbar )
Polyester: 99%+ removal efficiency standard to 5 micron
Paper: 99%+ removal efficiency standard to 2 micron
Heavy duty T bolts for easy maintenance
Hydrostatically tested to 0.5 bar pressure for
vacuum tightness
Low pressure drop
Positive engagement O-ring seal system
Large dirt holding capacity and Easy field cleaning,
especially when mounted horizontally or inverted
Inlet/outlet 1/4” gauge taps standard
Rugged all steel construction w/baked enamel finish
Temp (continuous): min -15°F (-26°C ) 220°F (max 104°C )
Filter change out differential: 10” - 15” H2O over initial delta P
Pressure drop graphs available upon request
CONFIGURATION
Special connections
Activated carbon prefilters to
reduce order
DRAWING
INLET
OUTLET
Dimension tolerance + 1/4”
I = Industrial Duty S = Severe Duty E = Extreme Duty
I
S
I
S
I
S
I
S
with
Polyester
Element
CSL-235P-300
CSL-335P-300
CSL-235P-400
CSL-335P-400
CSL-245P-500
CSL-345P-500
CSL-275P-600
CSL-375P-600
with
Paper
Element
CSL-234P-300
CSL-334P-300
CSL-234P-400
CSL-334P-400
CSL-244P-500
CSL-344P-500
CSL-274P-600
CSL-374P-600
MPT
Inlet &
Outlet
3"
3"
4"
4"
5"
5"
6"
6"
A
27 1/8
27 1/8
27 1/8
27 1/8
28 1/8
28 1/8
29 1/8
29 1/8
DIMENSIONS - inches
B
C
D
9
14
18 1/2
9
14
18 1/2
9
14
18 1/2
9
14
18 1/2
11
18 1/2 19 1/2
11
18 1/2 19 1/2
12
18 1/2 20 1/2
12
18 1/2 20 1/2
Note: Model offerings and design parameters may change without notice.
Approx.
Wt. lbs
47
50
52
55
82
88
95
97
1151 Ardmore Ave. Itasca, IL 60143 USA
Sales/Service: 630.773.1363 Fax: 630.773.0727
E-mail: [email protected] Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
CSL24-7365
E
10
15
10
15
10
15
10
15
Rated Flow SCFM
Nominal
Element
Rating
Rating
300
570
300
800
520
570
520
800
800
880
800
1100
1100
1100
1100
1500
pg. 3
INLET VACUUM FILTERS
Available in Stainless Steel
Epoxy coated housings
Support brackets
Various media
Larger sizes available
Straight-Through Configurations
CSL, ST, CT, VL, VS, LRS Series
OPTIONS (Inquiries Encouraged)
Small Compact Filter Silencers
w/ Standard Filter Design
®
"FS" Series 1/2” - 3” MPT
APPLICATIONS & EQUIPMENT
Waste Water Aeration
Nailers and Staplers
Vacuum Vent Breathers
FEATURES & SPECIFICATIONS
Polyester: 99%+ removal efficiency standard to 5 micron
Paper: 99%+ removal efficiency standard to 2 micron
Fully drawn weatherhood - no welds to rust or vibrate apart
Tubular silencing design - tube is positioned to maximize
attenuation and air flow while minimizing pressure drop
Durable carbon steel construction with baked enamel
finish and powder coated weatherhood
Interchangeable media: Polyester, Paper, HEPA
Several element sizes available per given connection
(safety factor)
Temp (continuous): min -15°F (-26°C ) max 220°F (104°C )
Filter change out differential: 10”-15” H2O over initial delta P
Pressure drop graphs available upon request
OPTIONS (Inquiries Encouraged)
1/8” tap holes
Pressure Drop Indicator
Available in Stainless Steel
Epoxy coated housings
CONFIGURATION
Various media available
Special connections, BSPT
DRAWING
Noise attenuation may vary due to the wide range of
applications and machines
Dimension tolerance + 1/4”
I = Industrial Duty S = Severe Duty
Rated Flow SCFM
with
Polyester
Element
I
I
I
S
I
I
I
S
S
I
FS-15-050
FS-15-075
FS-15-100
FS-19P-100
FS-19P-125
FS-19P-150
FS-31P-200
FS-231P-200
FS-231P-250
FS-231P-300
with
Paper
Element
FS-14-050
FS-14-075
FS-14-100
FS-18P-100
FS-18P-125
FS-18P-150
FS-30P-200
FS-230P-200
FS-230P-250
FS-230P-300
DIMENSIONS - inches
MPT
Outlet
A
B
C
1/2"
3/4"
1"
1"
1 1/4"
1 1/2"
2"
2"
2 1/2”
3”
4
4
4
6 5/8
6 5/8
6 5/8
7 1/4
12 1/4
12 1/2
13
1 1/2
1 1/2
1 1/2
1 5/8
1 5/8
1 5/8
2 1/4
2 1/4
2 1/2
3
6
6
6
6
6
6
10
10
10
10
Note: Model offerings and design parameters may change without notice.
Element
Rating
10
20
25
35
55
70
85
135
195
200
10
25
35
55
70
85
135
135
195
300
35
35
35
100
100
100
195
300
300
300
No. of
Silencing Approx.
Tubes
Wt. lbs
1
2
3
3
5
5
5
5
9
9
2
2
2
3
3
4
8
14
15
15
1151 Ardmore Ave. Itasca, IL 60143 USA
Sales/Service: 630.773.1363 Fax: 630.773.0727
E-mail: [email protected] Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FS25-406
Piston
Screw,
Blower,
Fan
pg. 3
FILTER SILENCERS
Engines
Construction\Contractor Industry
Workshop
Medical\Dental Industry
Pneumatic Conveying
FS, 2G, LQB, BBF, SLCR Series
Industrial & Severe Duty
Piston Compressors
Screw Compressors
Blowers - Side Channel & P.D.
Hydraulic Breathers – fine filtration
242:Layout 2
7/13/11
3:28 PM
Page 1
Series
BT
Bimetal Thermometers
2˝, 3˝ or 5˝ Dial, Dual Scale, ±1% FS Accuracy, External Reset
Thermometers,
Dial
TEMPERATURE
Series BT Bimetal Thermometers offer accurate, reliable service
even in the toughest environments. These corrosion resistant units are
constructed from stainless steel and are hermetically sealed to prevent
crystal fogging. The bimetal element directly drives pointer,
eliminating gears and linkage. An external reset screw allows field
calibration and easy-to-read aluminum dial minimizes parallax error.
Choose back connection, lower connection or adjustable angle for easy
viewing and installation. Adjustable models can be rotated a full 360°
and tilted over a 180° arc. NOTE: When using in pressurized
applications, use a suitable thermowell. Bimetal thermometers are
commonly used to measure water temperature on chillers and boilers.
Dial Size,
Stem
Model
Length
Back Connection
BTB22551* 2˝, 2-1/2˝
BTB2405D 2˝, 4˝
BTB2409D 2˝, 4˝
BTB32510D 3˝, 2-1/2˝
BTB3255D 3˝, 2-1/2˝
BTB3257D 3˝, 2-1/2˝
BTB34010D 3˝, 4˝
BTB3405D 3˝, 4˝
BTB3407D 3˝, 4˝
BTB3605D 3˝, 6˝
Temperature
Range, °F(°C)
0/250
0/250 (-20/120)
200/1000 (100/550)
0/200 (-20/100)
0/250 (-20/120)
50/550 (10/290)
0/200 (-20/100)
0/250 (-20/120)
50/550 (10/290)
0/250 (-20/120)
*Model offered in Fahrenheit scale only.
242
VISIT OUR WEBSITES:
Degree
Div., °F(°C)
2
2 (2)
10 (5)
2 (2)
2 (2)
5 (5)
2 (2)
2 (2)
5 (5)
2 (2)
www.dwyer-inst.com
SPECIFICATIONS
Wetted Materials: 304 SS.
Housing Material: Series 300SS.
Lens: Glass.
Accuracy: ±1% full scale.
Response Time: ≤ 40 seconds.
Temperature Limits: Head: 200°F (93°C); Stem: Not to exceed
50% over-range or 1000°F (538°C) or 800°F (427°C)
continuously.
Process Connection: 1/4˝ NPT on 2˝ dial size; 1/2˝ NPT on 3˝
or 5˝ dial size.
Stem Diameter: 1/4˝ O.D.
Immersion Depth: Minimum 2˝ in liquids, 4˝ in gas.
Dial Size,
Temperature
Stem
Model
Length Range, °F(°C)
Adjustable Angle Connection
BTA54010D
0/200 (-20/100)
5˝, 4˝
BTA5405D
0/250 (-20/120)
5˝, 4˝
BTA5407D
50/550 (10/290)
5˝, 4˝
BTA56010D
0/200 (-20/100)
5˝, 6˝
BTA5605D
0/250 (-20/120)
5˝, 6˝
BTA5607D
50/550 (10/290)
5˝, 6˝
Lower Connection
BTC3255D
3˝, 2.5˝
•
www.dwyer-inst.co.uk
0/250(-20/120)
•
Degree
Div., °F(°C)
2 (2)
2 (2)
5 (5)
2 (2)
2 (2)
5 (5)
2 (2)
www.dwyer-inst.com.au
071:Layout 2
7/12/11
2:13 PM
Page 1
Series
LPG3
PRESSURE
Low Pressure Gage
1% Full Scale Accuracy in a 2-1/2˝ Gage
Ø2-5/8
[Ø66.7)
PUSH IN LENS
1-29/32
[48.3]
Ø2-5/8
[Ø66.7]
PUSH IN LENS
1-21/32
[42]
R3/32
[R2.5]
35/64 SQ
[14]
35/64 SQ
[14.0]
31/64
[12]
25/64
[10]
2-1/2˝ BACK CONNECTION
1/4 NPT
2-1/2˝ BOTTOM CONNECTION
Series LPG3 Low Pressure Gages are designed to be especially sensitive with an elastic
element that expands and contracts with very small changes in pressure for ASME Grade 1A
accuracy. This series is meant for the measurement of low pressures of gases and liquids and is ideal
for air flow indicators, liquid level indicators and draft gages. Our new low pressure gages are
available in 2-1/2˝ dial with either a bottom or back connection option.
Model
Bottom
LPG3-D8122N
LPG3-D8222N
LPG3-D8422N
LPG3-D8622N
LPG3-D8822N
LPG3-D9922N
LPG3-D0022N
Range
in w.c./oz/in2
0-15 (0-8.6 oz/in2)
0-32 (0-18.5 oz/in2)
0-55 (0-32.0 oz/in2)
0-100 (0-58.0 oz/in2)
0-200 (0-116 oz/in2)
Range psi/kPa
0-5 (0-35 kPa)
0-10 (0-70 kPa)
Series
LPG4
Model
Back
LPG3-D8142N
LPG3-D8242N
LPG3-D8442N
LPG3-D8642N
LPG3-D8842N
LPG3-D9942N
LPG3-D0042N
Range
in w.c./oz/in2
0-15 (0-8.6 oz/in2)
0-32 (0-18.5 oz/in2)
0-55 (0-32.0 oz/in2)
0-100 (0-58.0 oz/in2)
0-200 (0-116 oz/in2)
Range psi/kPa
0-5 (0-35 kPa)
0-10 (0-70 kPa)
SPECIFICATIONS
Service: Compatible gases and liquids.
Wetted Materials: Brass.
Housing Materials: Steel with black finish.
Lens: Polycarbonate.
Accuracy: 1% full scale; ANSI B40.1 Grade 1A.
Pressure Limit: 110%.
Temperature Limits: -40 to 150°F (-40 to 65°C).
Size: 2-1/2˝ (63 mm).
Process Connections: 1/4˝ NPT, bottom or back.
Weight: 6.5 oz (184 g).
Single Pressure Gages,
Dial
1/4 NPT
3-29/64
[87.6]
2.5˝ Low Pressure Gage
1.5% Full Scale Accuracy in a 2-1/2” Gage
1.500
[38]
ø2.625
[67.7]
.550 SQUARE
[14.0]
[1/4 - 18NPT]
.850
[21.6]
B
BOTTOM CONNECTED
Our Series LPG4 gages offer top of the line performance and accuracy for pressure and
vacuum applications up to and including 160 in w.c. The LPG4 is constructed from a single
beryllium-copper diaphragm affixed to a precision-machined brass plate. This innovative
design, together with a high-precision, milled-teeth brass movement and nickel-silver pinion
and bearing surface, provide the user with a top of the line low pressure instrument.
Model
LPG4-D7122N
LPG4-D7222N
LPG4-D7322N
LPG4-D7422N
LPG4-D7522N
LPG4-D7622N
LPG4-D7722N
LPG4-D7822N
LPG4-D7922N
LPG4-D8022N
LPG4-D8122N
LPG4-D8222N
Range
-10-0 in. w.c. (-2.5-0 kPa)
-16-0 in. w.c. (-4-0 kPa)
-25-0 in. w.c. (-6-0 kPa)
-40-0 in. w.c. (-10-0 kPa)
-60-0 in. w.c. (-15-0 kPa)
-80-0 in. w.c. (-20-0 kPa)
-100-0 in. w.c. (-25-0 kPa)
-160-0 in. w.c. (-40-0 kPa)
-235-0 in. w.c. (-60-0 kPa)
0-10 in. w.c. (0-2.5 kPa)
0-15 in. w.c. (0-3.75 kPa)
0-25 in. w.c. (0-6 kPa)
CALL TO ORDER:
Model
LPG4-D8322N
LPG4-D8422N
LPG4-D8522N
LPG4-D8622N
LPG4-D8722N
LPG4-D8922N
LPG4-D9022N
LPG4-D9122N
LPG4-D9222N
LPG4-D9322N
LPG4-D9422N
LPG4-D9522N
U.S. Phone 219 879-8000
•
SPECIFICATIONS
Service: Compatible gases & liquids.
Wetted Materials: Brass and beryllium
copper.
Housing: Drawn steel, black finish.
Lens: Polycarbonate (removable).
Accuracy: ±1.5% full scale.
Pressure Limit: 100% of range scale.
Range
0-40 in. w.c. (0-10 kPa)
0-60 in. w.c. (0-15 kPa)
0-80 in. w.c. (0-20 kPa)
0-100 in. w.c. (0-25 kPa)
0-160 in. w.c. (0-40 kPa)
-4-0-6 in. w.c. (-1-0-1.5 kPa)
-6-0-10 in. w.c. (-1.5-0-2.5 kPa)
-8-0-16 in. w.c. (-2-0-4 kPa)
-16-0-24 in. w.c. (-4-0-6 kPa)
-24-0-40 in. w.c. (-6-0-10 kPa)
-30-0-50 in. w.c. (-7.5-0-14.5 kPa)
-40-0-60 in. w.c. (-10-0-0.15 kPa)
U.K. Phone (+44) (0)1494-461707
•
Temperature Limits:
Process: -40 to 160°F (-40 to 70°C);
Ambient: -40 to 140°F (-40 to 60°C).
Size: 2.5˝ (63 mm).
Process Connections: 1/4˝ male NPT.
Enclosure Rating: NEMA 3 (IP55).
Weight: 7.3 oz (0.21 kg).
Australia Phone (+61) (0) 2 4272 2055
71
VACUUMANDPRESSURELIQUIDFILLEDGAUGES
BackMount
UClamp
Standard

DualScalePSI/Kpa

StainlessSteelCase&Bezel

BrassInternals&NPTConnection
LFSB25‐PSI
2‐1/2
4

PhosphorBronzeBourdonTube
LFSB25‐PSI
2‐1/2
6

Accuracy1‐1/2"‐2‐1/2":3‐
2/3%4":1%
LFSB40‐PSI
4
5
LFSB40‐PSI
4
6


FlangeMount
PressureRange
Code
SuitableforAir,Water,Oil&Gas

Dial
Size
(In)

AmbientTemperature‐30Fto
160˚F
LiquidFilledHelpsDampen
EffectsofPulsationandVibration
LiquidFilledLubricatestheGauge
MovementKeepingthe
Contaminates(Dirt)
Away,ExtendingtheLifeofthe
Gauge

ANSE40.1Compliant

Connection:1/8"NPT1‐1/2"Dial
1/4"NPT2"&Above
PartNo.
BackMountPressureGauges
LFSB15‐PSI
1‐1/2
2
LFSB20‐PSI
2
3
BackMountU‐ClampPressureGauges
LFSB25‐PSI‐
U
2‐1/2
4
LFSB25‐PSI‐
U
2‐1/2
6
LFSB40‐PSI‐
U
4
5
LFSB40‐PSI‐
U
4
6
BackMountFlangePressureGauges
LFSB25‐PSI‐
F
2‐1/2
4
LFSB25‐PSI‐
F
2‐1/2
6
LFSB40‐PSI‐
F
4
5
LFSB40‐PSI‐
F
4
6
BackMountedVacuumGauges
VFSB15‐030
1‐1/2
7
VFSB20‐030
2
7
VFSB25‐030
2‐1/2
7
VFSB40‐030
4
7
BackMountU‐ ClampVacuumGauges
VFSB25‐
030U
2‐1/2
7
VFSB40‐
030U
4
7
Pressure
CodeRange
PSI/Hg
1
15,30,60,100,160,200,300PSI
2
SameAsRange1Plus600,1000,2000,3000,5000PSI
3
SameAsRange1Plus
600,1000,2000,3000,5000,6000PSI
4
SameAsRange1Plus
400,600,1000,1500,2000,3000,4000,5000,6000
PSI
5
SameAsRange1Plus
400,600,1000,1500,2000,3000,5000,6000psI
6
10,000,15000PSI
7
‐30”to0”Hg























TOLERANCES
(UNLESS
OTHERWISE
SPECIFIED)
CUSTOMER:
TITLE:
DATE
REVISION
BY
CH'D
10120 Industrial Drive
Pineville, N.C. 28134
PHONE 704-556-7723
FAX 704-556-7728
SCALE:
1"
SALES DRAWING
HVKO-120-500
KO Tank
DRAWN BY:
CHECKED BY:
Evan Chew
DATE:
4/13/2010
SHEET
APP'D BY:
BC
EC
DRAWING NO.
OF SHEETS
1
1
SALES
Page 3 of 4
356 AND 367 MODELS
DIMENSIONS
All dimensions are in inches.
Specifications subject to change without notice.
MATERIALS OF CONSTRUCTION
MODELS
COMPONENT
Housing
Rotor
Stator
Motor Data
35651
36751
35650
35652
36750
36752
Cast iron
Cast iron
316 SS
316 SS
316 SS
316 SS
416 SS/CP
416 SS/CP
316 SS/CP
316 SS/CP
316 SS/CP
316 SS/CP
NBR (Nitrile)
NBR (Nitrile)
NBR (Nitrile)
NBR (Nitrile)
NBR (Nitrile)
NBR (Nitrile)
1-1/2 HP, 3 PH
2 HP, 3 PH
1-1/2 HP, 3 PH
1-1/2 HP, 1 PH
2HP, 3 PH
2 HP, 1 PH
208/230/440 VAC
230/440 VAC
230/460 VAC
115/230 VAC
230/460 VAC
115/230 VAC
60 HZ TEFC
60 HZ TEFC
60 HZ TEFC
60 HZ TEFC
60 HZ TEFC
60 HZ TEFC
115
68
68
115
115
68
Weight (Ibs)
CP = Chrome plated
Page 4 of 4
PERFORMANCE (Water at 70°F)
NOTE: With the standard
1 ½ HP (Model 35651)
2 HP (Model 36751)
motor, maximum fluid
viscosity is 100 CP
(500 SSU).
© 1999 by Moyno, Inc.
® Moyno is a registered trademark of Moyno, Inc.
Printed in U.S.A.
DCA70USI
MQ POWER Series Generator
WhisperWatt™
Prime Rating — 56 kW (70 kVA)
Standby Rating — 62 kW (77 kVA)
Three-Phase, 60 Hertz, 0.8 PF
70
WHISPERWATT
STANDARD FEATURES
„„Heavy duty, 4-cycle, direct injection, diesel engine provides
maximum reliability.
„„Brushless alternator reduces service and maintenance
requirements and meets temperature rise standards for Class
H insulation systems.
„„Open delta excitation design provides virtually unlimited
excitation for maximum motor starting capability.
„„Automatic voltage regulator (AVR) provides precise regulation.
„„Electronic Governor Control — maintains frequency to within
±0.25% from no load to full load.
„„Full load acceptance of standby nameplate rating in one step
(NFPA 110, para 5-13.2.6).
„„Sound attenuated, weather resistant, steel housing provides
operation at 60 dB(A) at 23 feet. Fully lockable enclosure
allows safe unattended operation.
„„Internal fuel tank with direct reading of fuel gauge.
„„Seven stage powder coat paint system provides durability
and weather protection.
„„Fuel/water separator removes condensation from fuel for
extended engine life. Panel mounted alarm light included.
„„Complete engine analog instrumentation includes DC
ammeter, oil pressure gauge, water temp. gauge, fuel level
gauge, tachometer/hour meter, preheat indicator, emergency
shutdown monitors.
„„Automatic start/stop control — automatically starts the
generator set during a commercial power failure when used
in conjunction with a transfer switch.
„„Complete generator analog instrumentation includes voltage
regulator control, ammeter phase selector switch, voltmeter
phase selector switch, AC voltmeter, AC ammeter, frequency
meter, panel light, and circuit breaker.
„„Automatic safety shutdown system monitors the water
temperature, engine oil pressure, overspeed and overcrank.
Warning lights indicate abnormal conditions.
„„Complete power panel. Fully covered; three-phase terminals
and single phase receptacles allow fast and convenient
hookup for most applications including temporary power
boxes, tools and lighting equipment. The GFCI receptacles
are NEMA 5-20, and the auxilillary outputs use CS6369 twistlock receptacles.
„„Simultaneous single and three phase power.
„„Voltage selector switch offers the operator a wide range of
voltages that are manually selectable. Fine tuning of the
output voltage can be accomplished by adjusting the voltage
regulator control knob to obtain the desired voltage.
„„EPA emissions certified - Interim Tier 3 emissions compliant.
DCA70USI — MQ POWER SERIES GENERATOR — REV. #10 (01/13/15)
DCA70USI
MQ POWER Series Generator
SPECIFICATIONS
Cooling System
Generator Specifications
Design
Armature Connection
Phase
Standby Output
Prime Output
3Ø Voltage (L-L/L-N)
Voltage Selector Switch at 3Ø 240/139
3Ø Voltage (L-L/L-N)
Voltage Selector Switch at 3Ø 480/277
1Ø Voltage (L-L/L-N)
(Voltage Selector Switch at 1Ø 240/120)
Power Factor
Voltage Regulation (No load to full load)
Generator RPM
Frequency
No. of Poles
Excitation
Frequency
Frequency Regulation:
No Load to Full Load
Frequency Regulation: Steady State
Insulation
Sound Level dB(A) Full load at 23 feet
Revolving field, self-ventilated
Drip-proof, single bearing
Star with Neutral
Zig Zag
3
Single
62 KW (77 KVA)
44 KW
56 KW (70 KVA)
40 KW
208Y/120, 220Y/127,
N/A
240Y/139
416Y/240, 440Y/254,
N/A
480Y/277
N/A
240/120
0.8
1.0
±0.5%
1800
60 Hz
4
Brushless with AVR
60 Hz
Isochronous under varying loads from
no load to 100% rated load
±0.25% of mean value for constant loads
from no load to full load.
Class H
68
Fan Load
Coolant Capacity (with radiator)
Coolant Flow Rate (per minute)
Heat Rejection to Coolant (per minute)
Heat Rejection to Room (per minute)
Maximum Coolant Friction Head
Maximum Coolant Static Head
Ambient Temperature Rating
0.4 hp (0.3 kW)
3.57 gallons (13.5 liters)
15.4 gallons (58.5 liters)
2260 Btu (2.38 MJ)
578 Btu (0.61 MJ)
6.1 psi (42 kPa)
21 feet (6.4 meters)
104°F (40°C)
Combustion Air
Maximum Air Cleaner Restriction
Alternator Cooling Air
Radiator Cooling Air
138 cfm (3.9 m3/min)
25 in. H2O (6.25 kPa)
526 cfm (14.9 m3/min)
2009 cfm (56.9 m3/min)
Air
Exhaust System
Gas Flow (full load)
Gas Temperature
Maximum Back Pressure
Amperage
Rated Voltage
1Ø 120 Volt
1Ø 240 Volt
Engine Specifications
Make / Model
Emissions
Starting System
Design
Displacement
No. cylinders
Bore x Stroke (mm)
Gross Engine Power Output
BMEP
Piston Speed
Compression Ratio
Engine Speed
Overspeed Limit
Oil Capacity
Battery
Isuzu / BJ-4JJ1X
EPA Interim Tier 3 Certified
Electric
4-cycle, water cooled,
direct injection, turbocharged
183.0 in3 (2999 cc)
4
95.4 x 104.9
97.9 bhp (50 kW)
204 psi (1409 kPa)
1237 ft./min. (6.29 m/s)
17.5:1
1800 rpm
2100 rpm
3.96 gallons (15 liters)
12V 72Ah x 1
Fuel System
Recommended Fuel
Maximum Fuel Flow (per hour)
Maximum Inlet Restriction (Hg)
Fuel Tank Capacity
Fuel Consumption
At full load
At 3/4 load
At 1/2 load
At 1/4 load
332 cfm (9.4 m3/min)
932°F (500°C)
53.2 in. H2O (13.3 kPa)
3Ø 240 Volt
3Ø 480 Volt
Main Line Circuit Breaker Rating
Over Current Relay Trip Set Point
480V Mode Only
Maximum Amps
155.4 Amps (4 wire)
168A x 2 (Zigzag)
77.8 Amps (4 wire)
168A (Zigzag)
168 Amps
84 Amps
175 Amps
84 Amps
WARRANTY*
Isuzu Engine
12 months from date of purchase with unlimited hours or 24 months
from date of purchase with 2000 hours (whichever comes first).
Generator
24 months from date of purchase or 2000 hours (whichever occurs first).
Trailer
12 months excluding normal wear items.
*Refer to the express written, one-year limited warranty sheet for additional information.
ASTM-D975-No.1 & No.2-D
16 gallons (61 liters)
5.9 in. (150 mm)
103 gallons (390 liters)
gph
lph
4.1
15.4
3.1
11.9
2.1
8.1
1.3
4.8
NOTICE
Generator is not intended for use in enclosed areas or where free
flow of air is restricted.
Backfeed to a utility system can cause electrocution, shock and/
or property damage. DO NOT connect to any building’s electrical
system except through an approved device.
Specifications are subject to change without notice.
DCA70USI — MQ POWER SERIES GENERATOR — REV. #10 (01/13/15)
DCA70USI
MQ POWER Series Generator
GENERATOR OUTPUT PANEL
ULTRA-SILENT FEATURES
„„Low Noise Muffler — Large capacity low noise muffler
minimizes exhaust sound.
„„ Soundproof Casing — The new design divides the cabinet into
three sections, separating the engine, muffler and radiator for more
efficient cooling and reduces noise from the engine and fans.
„„New Cooling System — An advanced design uses two
separate air intake systems to cool the generator. The engine
fan draws air in to cool the engine and generator housing while
a second electric fan directly cools the radiator. With less air
being drawn into the generator through each fan, considerably
less noise is produced through the top of the generator.
„„Environmental Design — Constructed using an integrated
environmental skid and fuel tank. This design fully contains fuel
leakage and any liquid that might leak from the engine such as
lube oil or radiator coolant. All potentially hazardous liquids are
contained without contaminating the surrounding area.
OPTIONAL CONTROL FEATURES
„„Emergency Stop Switch — when manually activated shuts
down generator in the event of an emergency.
„„Audible alarm — alerts operator of abnormal conditions.
OPTIONAL GENERATOR FEATURES
„„Electronic Governor Control (Crystal Sync) —
maintains frequency to within ±0.25% from no load to full load.
„„Battery Charger — provides fully automatic and selfadjusting charging to the generator's battery system.
„„Jacket Water Heater — for easy starting in cold weather
climates.
„„Special Batteries — long life batteries provide extra engine
cranking power.
„„Spring Isolators — provides extra vibration protection for
standby applications.
„„Low Coolant Level Shutdown — provides protection
from critically low coolant levels. Includes control panel
warning light.
„„Trailer Mounted Package — meets National Highway
Traffic Safety Administration (NHTSA) regulations. Trailer is
equipped with electric or surge-hydraulic brakes with tandem
axle configuration.
OPTIONAL OUTPUT CONNECTIONS
„„Cam-Lok Connectors — provides quick disconnect
alternative to bolt-on connectors.
„„Pin and Sleeve Connectors — provides industry standard
connectors for all voltage requirements.
„„Output Cable — available in any custom length and size
configuration.
DCA70USI — MQ POWER SERIES GENERATOR — REV. #10 (01/13/15)
DCA70USI
MQ POWER Series Generator
DIMENSIONS
Weight
Dry Weight
Wet Weight
Max. Lifting
Point Capacity
3,771 lbs. (1,710 kg)
4,553 lbs. (2,065 kg)
14,050 lbs. (6,370 kg)
Generator can be placed on a
MQ Power Model TRLR70XF
Tandem Axle Trailer
Manufactured by Denyo Co.
Your Multiquip dealer is:
© COPYRIGHT 2015 MULTIQUIP INC.
DCA70USI2 Rev. #10 (01/13/15)
MULTIQUIP
POST OFFICE BOX 6254
CARSON, CA 90749
310-537-3700 • 800-883-2551
FAX: 310-604-3831
E-MAIL: [email protected]
WEBSITE: www.multiquip.com
4
Series 8215 | DC Valve Line Extension
2-Way Normally Closed Valves with New Molded Epoxy Watertight and
Hazardous Location DC Operators
Applications
• Gas Generators
• Boilers/Burners
• Ovens/Furnaces
• Kilns/Incinerators
• Heating Equipment
Features & Benefits
• New Watertight and Hazardous Location DC solenoid operators:
- Watertight - RedHat II molded epoxy Type 1, 2, 3S, 4, 4X enclosure with 1/2" conduit hub.
- Hazardous Location - RedHat II molded epoxy Type 1, 2, 3S, 4, 4X, 6, 6P, 7 (Groups A,B,C,D),
9 (Groups E,F,G) enclosure and a T3C temperature rating code with 1/2" conduit hub.
• High flow:
- Optimized internal valve geometry provides exceptionally high flow
• Improved ambient temperature range:
- Broad ambient range of 32˚F to 104˚F is ideally suited for cold and warm environments
• Agency Approvals:
- Meets UL 429 Electrically Operated Safety Valve
- FM Approved Process Control Valve
- CSA Certified to 22.2 No. 139 Electrically Operated Safety, Automatic Gas Valves ANSI Z21.21 6.5 C/I.
• ASCO SameDay or ASCO 5Day shipping program
- Most constructions are covered
- Keeps productions lines running smoothly
Specifications
Product Family
8215 Series
Normally Closed
Solenoid Valves
Pipe
Sizes (in)
Cv Flow
(Air, Inert Gas)
Gas Capacity
(Million BTU/hr)
1”
21
1.1
1 1/4”
32
1.7
1 1/2”
35
1.9
2”
60
3.2
Max.
OPD (psi)
www.a s cov al v e. com
25
Ambient
Temperature (˚F)
32 to 104
Standard Voltages
(Volts DC)
12, 24, 120, 240
15
01/15 - V7714R1
Sensaphone CELL682
Remote Montoring via Cellular
ASSURANCE
COUNTLESS INDUSTRIES DEPEND ON SENSAPHONE FOR THE MOST
COMPREHENSIVE REMOTE MONITORING SOLUTIONS AVAILABLE. WHEN YOU
NEED TO BE ABSOLUTELY SURE A REMOTE SITE IS STABLE, SECURE AND
MONITORED AROUND THE CLOCK, THERE’S NO SUBSTITUTE FOR CERTAINTY.
Easy to use –
everyday
We’ve got a
sensor for that
Your business is
our business
The Sensaphone CELL682 is so
easy to use just about anyone can
figure it out. If not, we offer free
tech support to walk you through it.
Sensaphone has a sensor for
monitoring everything from climate
conditions to security and more.
With over 350,000 systems
installed worldwide, we’ve put
Sensaphone to the test in just about
every application imaginable.
Suggested Applications
Agriculture
Know that the temperature, humidity, or other
critical conditions where plants or animals live
are in check while you’re away.
Water & Wastewater
Use your Sensaphone SAT4D to monitor
pumps, power failure and other conditions in
water and wastewater applications.
Oil & Gas
Don’t find out about equipment failure until the
morning. The Sensaphone SAT4D will call or
e-mail as soon as an alarm condition exists.
Sensaphone CELL682
Features and Specifications
Cellular
Battery Backup
Use the CELL682 in locations
where a traditional land line is
not available. Receive alarms
via a phone call, text, or e-mail.
Rest easy knowing that even if the
power goes out, the CELL682 will
keep monitoring.
Output
LEDs
Connect to an output such as
a light or horn to alert anyone
nearby there’s a problem.
LED lights give a quick visual
status. Know everything is
okay by simply looking at the
CELL682.
Inputs
Accept fourteen different inputs
– a wide range of sensors are
available.
Power
Comes with a plug in power
supply that also monitors for
power failures.
Contact
Series
2.8K
Series
10K
Series
4-20mA
Series
Enclosure
The CELL682 comes sealed in a
NEXA 4X enclosure which allows
it to be placed in less than ideal
environments.
Web Services
Program, adjust and monitor the status of the
sensors on a webpage the CELL682 creates.
Popular Compatible Sensors & Accessories
2.8K Room Temperature Sensor . . . . . . . . . . . . FGD-0100
PowerOut Alert Power Failure Switch. . . . . . . FGD-0054
2.8K Weatherproof Temperature Sensor . . . .FGD-0101
Magnetic Reed Door and Window Switch . . FGD-0006
2.8K Temperature Sensor in
Glass Bead Vial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0107
Zone Water Detection Sensor . . . . . . . . . . . . . . FGD-0056
Temp Alert Temperature Switch . . . . . . . . . . . FGD-0022
Infrared Motion Detection Sensor . . . . . . . . . . FGD-0007
Humidistat Humidity Switch . . . . . . . . . . . . . . . . FGD-0027
Float Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0222
901 TRYENS ROAD
ASTON, PA 19014
PH: 877-373-2700
F: 610-558-0222
WWW.SENSAPHONE.COM
Distributed By:
LIT-xxxx © SENSAPHONE 11/2013
SENSAPHONE®
Additional 10’ of Water Rope . . . . . . . . . . . . . . . FGD-0063
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement