D-Series Technical Data sheet
Product Data sheets
DOC.DSB.DB.US Rev. F
November 2015
Bettis D-Series
Technical data pneumatic Rack and Pinion actuators
www.Bettis.com
D-Series
Data sheet
D-Series
Sheet No.: DPI 1.01 Rev. B
Date: November 2015
Technical details
Standard actuator
Specifications
Pressure range:
Double acting
Spring return
3 to 120 psig
43 to 120 psig
0.2 - 8 barg
3 - 8 barg
Torque range:
130 to 14874 Ibf.in at 80 pisg supply pressure.
14.6 to 4955 Nm at 6 barg supply pressure.
See torque datasheets:
* DPI 3.01 (Double Acting)
* DPI 3.02 (Spring Return)
Operating media:
* Air, dry or lubricated and inert gasses.Air, dry or
lubricated and inert gasses. Dew point 10 K below
operating temperature. For temperatures below 32°F
(0°C) take appropriate measures to prevent freezing
of condensate.
Basic Temperature ranges:
Standard:
Optional high:
Optional low:
-4°F to 176°F
-4°F to 248°F
-40°F to 176°F
2
Open
(End cap stopscrew 2)
+3°
1
2
-10°
96°
D-Series Travel Adjustment
90°
-20° to +80°C
-20° to +120°C
-40° to +80°C
65°
-15°
(see data sheet DPI 5.02 or DPI 5.03 for high or low
temperature applications)
+3°
Closed
(Front stopscrew 1)
Lubrication :
Factory lubricated for the normal life of the actuator.
Construction:
Suitable for indoor and outdoor installation.
Finish:
Polyester non-TGIC based powder coating (see data
sheet DPI 6.01)
Rotation:
* 90° Nominal
* Double acting
* Spring return
www.Bettis.com
Standard
Fail to Close action
:Standard counter clockwise with
port “A” pressurized (mode A,
see data sheet DPI 7.01 for other
assembly codes).
:Clockwise fail action (mode A,
see data sheet DPI 7.02 for other
assembly codes).
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Fail to Open action
is factory option.
Data sheet
D-Series
Sheet No.: DPI 1.02 Rev. A
Date: April 2010
Technical data:
Actuator type
Bore
Stroke
Double acting
Weight:
Spring return
Operating time (1
Air consumption (2 port A
at 1 atm (litres)
port B
D12
mm.
46
mm. 12.6
kg.
0.6
kg.
0.7
sec.
0.4
stroke 0.1
stroke 0.1
D25
56
15.7
1.3
1.7
0.5
0.1
0.1
D40
70
18.8
1.8
2.4
0.7
0.2
0.2
D65 D100 D150
80
91 103
22 25.1 31.4
2.4 3.1
3.6 4.6
1.1 1.2 1.8
0.3 0.4 0.84
0.4 0.5 0.78
D200
110
37.7
5.8
9.1
2.3
0.8
1
D350
145
37.7
10.4
16.9
3.6
1.8
1.9
Note:
D600 D950 D1600 1.Operating time is average with
actuator under load and solenoid
175
200
230
valve fitted.
44
50.3
62.8
19.4 26.4
42.7 2.Air consumption is the actual free
air volume at 1 atm.
27.6 38.6
65.8
3.Pressure is in barg.
4.5
5.4
6.9
4.DD = Double acting
2.9
4.7
7.3
DS = Single acting
(Spring Return)
3.1
4.9
8.0
Operating principle
Double acting actuator
- If port “A” is pressurised and port ”B” is vented, both
the pistons move outwards to the endpositions.
- The moving pistons cause the pinion to rotate
counter clock wise.
A
B
- If port “B” is pressurised and port ”A” is vented, both
the pistons move inwards to their block positions.
- The moving pistons cause the pinion to rotate
clock wise.
A
B
Note:
The above described operating principle is applicable
for standard actuators (assembly mode A).
For reverse acting actuators (assembly mode D),
pressurizing the ports will result in a oposite rotation.
www.Bettis.com
Single acting (spring return) actuator
- If port “A” is pressurised and port ”B” is vented, both
the pistons move outwards compressing the springs.
- The moving pistons cause the pinion to rotate
counter clock wise.
A
- If port “A” is vented, the spring force applied to the
pistons move them inwards to their block positions.
- The moving pistons cause the pinion to rotate clock
wise.
A
Note:
The above described operating principle is applicable for
standard “Fail to Close” actuators (assembly mode A).
For reverse acting “Fail to Open” actuators (assembly
mode D), pressurizing the ports will result in a oposite
rotation.
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 2.01 Rev. B
Date: August 2010
Pneumatic Actuator Configuration
DS0040 . B 2 A 04 K . 14 K 0
Temperature range
Indication knob
Insert code (see below)
Color code
Spring set
Assembly code
Travel stops
Tapped mounting bolt holes
Actuator type and size
Actuator Size and Type
DD
D-Series & Double-Acting or
DS
D-Series & Spring-Return
XXXX Body size (0012, 0025, 0040, 0065, 0100,
0150, 0200, 0350, 0600, 0950 or 1600)
Tapped, Mounting Bolt Holes
B
UNC (Standard Bettis Trim, ISO 5211 with
UNC bolt holes on valve mounting side, Metric
bolt holes on NAMUR patterns NPT ports)
see data sheet DPI 4.01 or DPI 4.02
Travel Stops
2
Dual Travel Stops (Standard Bettis Trim for all
models except for 0012)
0
No Travel Adjustment (Only for model 0012)
Assembly Modes
A
Standard Bettis Trim Fail-CW (Mounted in line,
standard)
B
Fail-CW (mounted across line, special order)
C
Fail CCW (mounted across line, special order)
D
Fail CCW (mounted in line, special order)
see data sheet DPI 7.01 or DPI 7.02
www.Bettis.com
Spring Set Number
00
No springs (Double-Acting)
01, 02,Spring set (Spring-Return only)
03, 04,
05 or 06
see data sheet DPI 3.02 or DPI 8.01
Color Code
K
Bettis orange
Insert Code – Inner Square
XX
Bettis standard will be the ISO size,
see data sheet DPI 4.03
Indication Knob
D
Visual Indication (Disk, use only when required
with switch for visual indication)
K
Visual Indication (Knob, Standard)
N
No Visual Indicator
Temperature Range
0
Standard Temperature -4°F to +175°F
(-20°C to 80°C), see data sheet DPI 5.01
1
High Temperature -4°F to 250°F
(-20°C to 121°C), see data sheet DPI 5.03
2
Low Temperature -40°F to 175°F
(-40°C to 80°C), see data sheet DPI 5.02
Note:
For temperatures outside these ranges contact Bettis
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 3.01 Rev. B
Date: November 2015
Torque (lbf.in)
DD - Double acting actuators
Actuator
Type Size
DD
12
DD
25
DD
40
DD
65
DD
100
DD
150
DD
200
DD
350
DD
600
DD
950
DD
1600
30
43.9
81.4
153
233
344
551
754
1310
2226
3323
5493
35
51.4
95.3
179
272
402
645
883
1534
2606
3890
6431
40
58.9
109
205
312
461
739
1011
1757
2986
4458
7369
45
66.4
123
231
352
520
833
1140
1981
3366
5025
8307
Torque of double acting actuators (in lbf.in)
Supply pressure (psi)
50
55
60
70
75
73.9
81.4
88.9
104
111
137
151
165
193
206
257
283
309
361
387
392
431
471
551
590
578
637
696
813
872
927
1021
1115
1303
1397
1269
1398
1527
1784
1913
2205
2428
2652
3100
3323
3747
4127
4507
5267
5647
5593
6160
6728
7862
8430
9245
10183
11121
12998
13936
80
119
220
413
630
930
1491
2042
3547
6028
8997
14874
90
134
248
466
709
1048
1680
2299
3994
6788
10132
16750
100
149
276
518
789
1165
1868
2557
4442
7548
11267
18626
120
179
332
622
948
1400
2244
3072
5337
9069
13537
22379
Note:
1.Emerson Process Management recommends that the valve manufacturer supply the maximum required torque
values (Including any adjustments or suggested safety factors for valve service conditions or application).
Additionally, the valve manufacturer must identify at which position(s) and direction(s) of rotation (Counter Clock
Wise or Clock Wise) these maximum requirements occur.
2.If in doubt, or you require any assistance with sizing actuators, do not hesitate to contact your nearest
Emerson's Valve Automation representative.
Double Acting
Torque
Start
End
Torque
Rotation
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
A
B
Data sheet
D-Series
Sheet No.: DPI 3.02 Rev. C
Date: November 2015
Torque (lbf.in)
DS - Single acting actuators (Spring Return)
Springset
Actuator nr
Type
DS 12
2
DS 25
2
3
4
5
6
DS 40
2
3
4
5
6
DS 65
2
3
4
5
6
DS 100
2
3
4
5
6
DS 150
2
3
4
5
6
DS 200
2
3
4
5
6
DS 350
2
3
4
5
6
DS 600
2
3
4
5
6
DS 950
2
3
4
5
6
DS 1600 2
3
4
5
6
C
71
48
133
91
196
303
211
486
337
656
448
1105
1920
2898
4765
3244
-
www.Bettis.com
40
D
44
8
82
15
117
192
44
297
54
406
74
684
1183
1777
2988
578
-
Air Stroke (lbf.in)
SUPPLY PRESSURE (in PSI)
60
80
100
C
D
C
D
C
D
48
24
80
55
111
87
130
103
189
162
248
221
107
67
166
126
225
185
85
31
144
90
203
149
121
54
180
113
158
77
243
193
354
303
464
414
201
125
312
236
422
346
159
58
270
169
380
279
228
101
338
212
296
144
365
285
533
454
701
622
297
178
466
347
634
515
230
71
398
240
567
408
331
133
500
301
432
194
552
441
801
690
1050
939
460
293
709
542
958
791
367
144
616
393
865
642
523
245
772
494
430
96
679
345
884
696
1283
1094
1681
1493
735
453
1134
852
1533
1250
587
210
985
609
1384
1007
837
366
1235
764
1087
522
1202
952
1747
1498
2293
2043
994
619
1539
1165
2085
1710
786
287
1332
832
1877
1378
1124
500
1669
1045
1462
713
2053
1632
3001
2580
3949
3528
1675
1043
2623
1991
3571
2939
1297
455
2245
1403
3193
2351
1866
814
2814
1762
2436
1173
3531
2794
5142
4405
6753
6016
2909
1804
4520
3415
6131
5026
2287
814
3898
2425
5509
4036
3276
1434
4887
3046
4265
2055
5303
4182
7708
6587
10113
8992
4391
2709
6796
5114
9201
7519
3479
1236
5884
3641
8288
6046
4971
2168
7376
4573
6464
3100
8741
6964
12716 10939 16692 14915
7220
4554
11196
8530
15171 12505
5699
2145
9675
6120
13650 10096
8154
3711
12129
7686
10608
5277
Spring Stroke
120
C
D
143
119
306
280
284
244
262
208
239
172
217
136
575
524
533
457
491
390
449
322
406
255
870
790
802
683
735
576
668
470
601
363
1299
1188
1206
1039
1114
891
1021
743
928
594
2080
1892
1931
1649
1783
1406
1634
1163
1485
920
2838
2589
2631
2256
2423
1924
2215
1591
2007
1258
4897
4476
4519
3887
4141
3299
3762
2710
3384
2121
8364
7628
7742
6637
7120
5647
6498
4657
5876
3666
12518 11397
11606
9924
10693
8451
9781
6978
8869
5505
20668 18890
19147 16481
17626 14071
16105 11662
14584
9252
(lbf.in)
E
F
63
40
62
39
94
59
125
78
156
98
188
117
117
73
176
110
234
146
293
183
351
220
186
117
279
176
372
234
465
292
558
351
258
161
387
242
516
323
646
403
775
484
423
259
634
388
845
517
1056
647
1268
776
579
362
868
542
1158
723
1447
904
1736
1085
1025
658
1537
987
2049
1317
2561
1646
3074
1975
1723
1082
2585
1624
3446
2165
4308
2706
5169
3247
2563
1587
3844
2381
5125
3175
6407
3968
7688
4762
4193
2646
6289
3970
8385
5293
10481
6616
12578
7939
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
C
Start
Air stroke
D
End
Torque
Rotation
Counter Clockwise
Spring stroke
E
Start
F
End
Torque
Rotation
Clockwise
Notes:
1.Emerson Process
Management - Valve
Automation recommends
that the valve
manufacturer supply the
maximum required torque
values (Including any
adjustments or suggested
safety factors for valve
service conditions or
application). Additionally,
the valve manufacturer
must identify at
which position(s) and
direction(s) of rotation
(Counter Clock Wise
or Clock Wise) these
maximum requirements
occur.
2.If in doubt, or you require
any assistance with
sizing actuators, do
not hesitate to contact
your nearest Emerson’s
Valve Automation
representative.
Data sheet
D-Series
Sheet No.: DPI 4.01 Rev. B
Date: November 2015
Dimensions and Torque
DD/DS12
T
W2
Dim. in Inches
U U1
M
A DD
B DS
C
D
E
E2
F
G
H
I
J
K
K1
L
L1
M
N
Omax.
Omin.
P
R
R1
T
U
V
W
W1
W2
X
Y
N±0.5
O
E
15
F
M5x8
G1/4"
I
Y
G
D
E2
K1
C
K
45
J
W1
X
L
H
L1
Note: Dotted image
represents optional NAMUR solenoid interface
blockM5x8G1/4"
A
øP
+0
0 .5
B
øV
W
4.06
4.65
2.36
0.79
0.63
0.91
0.39
0.47
2.36
1.30
0.83
0.50
0.25
1.00
2.00
0.65
0.039
0.358
0.354
0.476
1.57
1.57
1.57
1.22
1.654
10-24 UNCx.24"
10-24 UNCx.24"
10-24 UNCx.24"
1/8"NPT
M6x.48
R
DOUBLE ACTING TORQUE (DD)
Pressure
psi
40
50
Torque
(lbf.in) 59
74
90°/180°
60
70
80
90
100
120
89
104
119
134
149
179
SINGLE ACTING TORQUE (DS)
Pressure
Position
Torque 90°
Torque 180°
www.Bettis.com
psi
60
start end
(lbf.in) 48
23
(lbf.in) 49
25
Air stroke
80
start end
80
55
81
57
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
100
start end
112
87
112
88
Spring
stroke
start
64
63
end
41
40
Data sheet
D-Series
Sheet No.: DPI 4.02 Rev. B
Date: June 2013
Dimensions
DD & DS - Actuators
D-Series actuators
Dim.
in inch
D 25
D 40
D 65 D100 D150 D200 D 350 D600 D950 D1600
A = DD
6.26
7.09
7.83
8.70
B = DS
6.77
8.03
9.80
10.51 12.20 14.17 15.24 18.78 20.35 25.08
C
3.15
3.66
4.13
4.65
5.51
5.63
7.13
8.66
10.20 11.69
D
0.79
0.79
0.79
0.79
0.79
0.79
0.79
1.18
1.18
1.18
E
0.63
0.87
0.87
0.87
1.42
1.42
1.42
2.17
2.17
2.52
E2
0.91
1.18
1.18
1.18
1.77
1.77
1.77
2.56
2.56
2.95
1.42
F
0.39
0.55
0.55
0.55
0.75
0.75
0.75
1.42
1.42
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.39
0.39
0.39
H
2.91
3.39
3.86
4.25
4.76
5.04
6.81
8.15
9.09
10.43
I
1.81
2.09
2.26
2.48
2.76
2.87
3.71
4.45
4.96
5.59
J
1.26
1.32
1.54
1.59
1.59
1.99
2.85
3.33
4.15
4.74
J1
1.11
1.38
1.57
1.72
1.92
2.12
2.85
3.50
4.03
4.50
K
0.94
1.30
1.30
1.50
2.17
2.17
2.17
2.68
2.95
3.74
L
0.45
0.61
0.61
0.73
0.97
0.97
0.97
1.63
1.63
1.87
M1
1.36
1.36
1.36
1.36
1.97
1.97
1.97
2.05
2.52
3.23
M2
-
-
-
1.06
-
1.46
1.46
-
-
-
N
U1
0.04
0.04
0.06
M5x8
2
B
R1
0.04
0.06
0.06
0.06
0.06
1.26
A
0.16
1/4” NPT
E2
E
F
I
X
G
0.16
J1
C
J
H
A
B
0.06
P
0.555 0.713 0.713 0.992 1.004 1.110 1.425 1.425 1.898 2.370
P1
0.555 0.713 0.831 0.909 1.122 1.303 1.303 1.437 1.909 2.382
P2
-
-
-
R
2.05
2.56
2.76
2.76
3.46
3.54
R1
1.97
1.97
1.97
2.36
2.36
R2
-
-
-
-
0.988 0.988 1.264 1.264
-
-
-
4.49
4.88
5.12
6.06
2.36
2.36
3.54
3.54
4.92
-
-
-
-
-
5.20
S
2.05
2.56
2.76
2.76
3.62
3.54
4.49
4.88
5.59
11.02
S1
3.94
3.94
3.94
3.94
3.94
3.94
3.94
6.69
6.69
8.27
T1
3.150 3.150 3.150 3.150 3.150 3.150 3.150 5.118 5.118
5.118
U1
1.181 1.181 1.181 1.181 1.181 1.181 1.181 1.181 1.181 1.181
F03
V
W
W1
X
X max.
Y
F05
F05
F07
F07
F07
F10
F10
F16
1.417 1.969 1.969 1.969 2.756 2.756 2.756 4.016 4.016 6.496
1/4”- 1/4”- 1/4”- 5/16”- 5/16”- 5/16”- 3/8”- 3/8”3/4”-10
20
20
20
18
18
18
16
16
x1.14
x.39 x.39 x.39 x.39 x.39 x.39 x.63 x.63
10-24
x,31
F05
V1
F05
F07
F07
F07
F10
F10
F10
F12
F14
1.969 2.756 2.756 2.756
1/4”- 5/16”- 5/16”- 5/16”20
18
18
18
x.39 x.39 x.39 x.39
1.42 1.63 1.63 1.99
4.016 4.016 4.016 4.921 5.512
3/8”- 3/8”- 3/8”- 1/2”- 5/8”16
16
16
13
11
x.63 x.63 x.63 x.79 x.98
2.36 2.46 2.85 4.02 4.02
1.63 1.91 1.91 2.30
1/4"- 5/16"- 5/16"- 3/8"20
18
19
16
2.64
3/8"16
www.Bettis.com
2.91
1/2"13
3.31
1/2"13
4.51
5/8"11
øP2
øP1
W
øV
øV 1
øP
0.433 0.551 0.551 0.748 0.748 0.866 1.063 1.063 1.417 1.811
M6x.47
D
O max. 0.436 0.554 0.554 0.751 0.751 0.870 1.067 1.067 1.424 1.817
O min.
.95
L
0.669 0.669 0.669 0.787 0.787 1.161 1.161 1.161 1.949 2.303
0.04
M5x8
10.00 11.14 12.01 15.24 16.69 20.31
G
M3
S1
T1
2
W1
M1
M2 M3
O R
øK
N ±0.02
S
1
S
1
9.236"
5/8"-11 x.98
3.827"
R2
4.31
4.51 4.88
5/8"3/4"-10
11
Note:
1.Flange and square drive to ISO 5211
2.Top and solenoid flange to VDE\VDI 3845 (NAMUR)
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 4.03 Rev. A
Date: April 2010
Drive inserts
Description
Most of the Bettis D-Series actuators are fitted with
drive inserts. This enables actuators to be directly
mounted onto suitable valves and eliminates the need
for a bracket and coupling type mounting kit. The use
of direct mounts significantly cuts the cost of the valve/
actuator assembly.
Standard actuators are fitted with square drive inserts
in accordance with ISO 5211 (or DIN 3337), but a
wide variety of other inserts are also available. Special
inserts may have oversize or undersize squares,
double-D and shaft key way forms.
Drive inserts can be supplied on factory built actuators
or as loose items and are easily replaceable at
distributor or end user level.
Where direct mounts are not possible, for instance on
valves with exposed grand packing, the use of inserts
often simplifies the design of the mounting kit.
Material:
Aluminum alloy
Finish:
Anodized
The 0012 actuator size does not have inserts, but
has the inner square directly in the bottom of the
pinion. See the following data sheet DPI 4.01 for more
information.
D25
mm. inch
ISO5211
M1
M2
P1
P2
Sq max.
D max.
D40 / D65
mm. inch
11
0.433
14
0.551
9
10
-
0.354
0.394
10
12
-
0.394
0.472
34.5 1.36 34.5 1.36
14.1 0.56 18.1 0.71
11 0.433 16 0.630
13.8 0.543 21 0.827
www.Bettis.com
sq
Max.
Ø P2
Ø P1
Standard inserts
D
Max.
M1 M2
D
Max.
Optional inserts
Insert mounting
acc. ISO 5211
Inserts with inner-square-dimensions per actuator type
D100
D150
D200
D350
D600
D950
D1600
mm. inch mm. inch mm. inch mm. inch mm. inch mm. inch mm. inch
Standard inserts dimensions
19 0.748 19 0.748 22 0.866 27 1.063 27 1.063 36 1.417 46 1.811
Optional insert dimensions
12 0.472 14 0.551 14 0.551 14 0.551 14 0.551 22 0.866
14 0.551 16 0.630 16 0.630 16 0.630 16 0.630
16 0.630 22 0.866 17 0.669 17 0.669 17 0.669
24 0.945 19 0.748 19 0.748 19 0.748
27 1.063 24 0.945 24 0.945 24 0.945
Maximum insert dimensions
34.5 1.36
50
1.97
50
1.97
50
1.97
52
2.05
64
2.52
82
3.23
27
1.06
37
1.46
37
1.46
37
1.46
23.1 0.91 28.5 1.12 32.1 1.26 32.1 1.26 36.5 1.44 48.5 1.91 60.5 2.38
25.2 0.99 36.2 1.43 36.2 1.43 36.2 1.43
19 0.748 27 1.063 27 1.063 27 1.063 27 1.063 36 1.417 46 1.811
23.6 0.929 36.6 1.441 33.6 1.323 33.6 1.323 33.6 1.323 45 1.772 60 2.362
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 5.01 Rev. B
Date: February 2011
Construction, Parts and Materials
Standard Actuator
Parts
Nr.
1
2
3
4
5
6
7
8
9
10 *
11 *
12 *
21
22
23
25
26
27
28
29
30
34
35
36
37
38
40
41
*
*
*
*
*
*
*
*
*
*
Materials
Notes
Description
Qty. Description
Body
1 Aluminum Alloy
1
Piston
2 Aluminum Alloy
5
Drive Shaft
1 Aluminum Alloy
2
End Cap DD
2 Aluminum Alloy
End Cap DS
2 Aluminum Alloy
Spring- inner
2 Carbon Spring Steel
3
Spring- mid
2 Carbon Spring Steel
3
Spring- outer
2 Carbon Spring Steel
3
Spring Holder
2 Steel
4
Guide Band, body
1 Nylatron
Guide Band, piston
2 PTFE, Carbon filled
Bearing Bush, shaft
1 Nylatron
bottom
O-ring, shaft top
1 Nitrile Rubber
Washer DS, end cap nut
2 Nylon
Washer DD, end cap nut
2 Nylon
O-ring, end cap
2 Nitrile Rubber
O-ring, piston
2 Nitrile Rubber
Washer, shaft top
1 ZEDEX 100 K
O-ring, shaft bottom
1 Nitrile Rubber
O-ring, limit stop bolt, DS 4 Nitrile Rubber
O-ring, limit stop bolt, DD 2 Nitrile Rubber
Washer DS
2 Steel
4
Spring Clip
1 Carbon Spring Steel
3
End Cap Bolt DD/DS
8 Stainless Steel
Limit Stop Bolt DS
2 Stainless Steel
Nut, DS
2 Stainless Steel
Limit Stop Bolt DD
2 Stainless Steel
Nut, DD
2 Stainless Steel
-
Parts
Nr.
42
43 *
44
45
Materials
Notes
Description
Qty. Description
Nut Cover
2 Polyethylene
O-ring, B-port
2 Nitrile Rubber
Insert
1 Aluminum Alloy
1
Threaded insert
8 Steel
4
Cam for stroke
46
1 Stainless Steel
adjustment
Shaftpin for stroke
47
1 Chrome nickel steel
adjustment
48 * Washer
1 Nylon
O-ring Front Limit Stop
49 *
1 Nitrile Rubber
bolt
50
Front Limitstop Bolt
1 Stainless Steel
51
Nut
1 Stainless Steel
* Recommended spare parts (contained in Repair kits)
37
34 09
06
07
08
05 36 22 38 42
29
02 10
35
43
27
Notes
1Anodized
2 “Aircraft grade” aluminum alloy, hard anodized
3 Deltatone Coating
4 Zinc plated and passivated
5 Dichromate treatment
36
01
21
47
46
Finish:
03
Standard : Polyester non-TGIC based powder coating
(see data sheet DPI 6.01)
12
28
42 41 23 40 30 04 25 11 26
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
44
50 49 48 51 42
Data sheet
D-Series
Sheet No.: DPI 5.02 Rev. A
Date: April 2010
Construction, Parts and Materials
Actuators for low temperature applications
Description:
A double piston, rack and pinion pneumatic actuator
incorporating a three point piston support system, antiblowout spindle and with high duty synthetic bearings
at all bearing points.
This version is a standard aluminium actuator, but
incorporating parts and materials suitable for low
temperature operation.
O-ring seals:
Grease:
Silicone MVQ 70 Sealings
Amoil ISO-460 PC# 802 (ESL-5)
Note:
When operating actuators in sub-zero temperatures
(< 0°C or < 32°F) care should be taken to counter the
effects of freezing condensate inside the actuator.
Specification:
Max. pressure: 8 bar ~ 120psi
Torque:Standard
Media:
Air or non corrosive gas
Temperature: -40°F to +176°F (-40°C to +80°C)
Finish:
Polyester non-TGIC based powder
coating (see data sheet DPI 6.01).
Spare parts:
Dedicated low temperature spare parts are available
for maintenance or make a standard actuator suiteable
for low temperature operation.
Materials:
Part
Housing
Drive Shaft
Piston
Sealings
Grease
Shaft bearings
Piston bearings
Bodybearings
Shaft thrust washer
End cap bolts
Springs
www.Bettis.com
Material
Aluminium Alloy
Aluminium Alloy
Aluminium Alloy
Silicone MVQ 70 O-rings
Amoil ISO-460 PC# 802 (ESL-5)
Top :
Delrin
Bottom :
Nylatron
PTFE
Nylatron
ZEDEX 100 K
Stainless Steel
Carbon Spring Steel
Specifications
Remark
UNS A13600, ASTM B85
UNS 1 77075, ASTM 7075 T6 Hard anodized
UNS A03560, ASTM B26
-/-/POM
PA6.6 + MoS2
25% Carbon filled
PA6.6 + MoS2
-/AISI 304 A2
UNS G10860, ASTM A228
Deltatone coating
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 5.03 Rev. A
Date: April 2010
Construction, Parts and Materials
Actuators for high temperature applications
Description:
A double piston, rack and pinion pneumatic actuator
incorporating a three point piston support system, antiblowout spindle and with high duty synthetic bearings
at all bearing points.
This version is a standard aluminium actuator, but
incorporating parts and materials suitable for high
temperature operation.
Specification:
Max. pressure
Torque
Media
Temperature
O-ring seals:
Grease:
Viton FPM Sealings
Castrol LMX Grease
:8 bar ~ 120psi
:Standard
:Air or non corrosive gas
:-4°F to +248°F (-20°C to +120°C)
Spare parts:
Dedicated high temperature spare parts are available
for maintenance or make a standard actuator suiteable
for high temperature operation.
Materials:
Part
Housing
Drive Shaft
Piston
Sealings
Grease
Shaft bearings
Piston bearings
Bodybearings
Shaft thrust washer
End cap bolts
Springs
www.Bettis.com
Material
Aluminium Alloy
Aluminium Alloy
Aluminium Alloy
Viton FPM O-rings
Castrol LMX
Top :
Delrin
Bottom :
Nylatron
PTFE
Nylatron
ZEDEX 100 K
Stainless Steel
Carbon Spring Steel
Specifications
Remark
UNS A13600, ASTM B85
UNS 1 77075, ASTM 7075 T6 Hard anodized
UNS A03560, ASTM B26
-/-/POM
PA6.6 + MoS2
25% Carbon filled
PA6.6 + MoS2
-/AISI 304 A2
UNS G10860, ASTM A228
Deltatone coating
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 6.01 Rev. A
Date: April 2010
Bettis D-Series corrosion protection system
Description:
The corrosion protection system of the standard Bettis
D-Series pneumatic actuators consist of the following
treatments or materials:
Pinion:
High grade aluminum
alloy, hard anodized
Housing & Endcaps
Polyester non-TGIC
based powder coating
for exterior use.
1 De-greasing.
All aluminum parts are de-greased before the powder
coating is applied by washing with an alkaline solution
to assure the best bonding between the aluminum
surface and the coating.
2 Powder coating.
- Polyester non-TGIC based powder coating for
exterior use.
- The powder coating is applied cold using automatic
electrostatic spray equipment and is cured at
minimum 190°C (374°F) offering excellent light and
weather resistance.
- The powder coating thickness is 1.5 mils (37
microns) minimum, and 2 mils (50 microns) average.
- Good chemical resistance against most bases, acids,
solvents, alkalis and oils at normal temperatures.
- Excellent exterior mechanical durability.
- The coating has passed a salt spray test according
to ASTM B117 for 500 hours. The powder coating is
virtually solvent free, and therefore environmentally
friendly.
3 High grade & anodized aluminum pinion.
Actuators with high grade & anodized aluminum
pinions, passed a 500 hours salt spray test. Optional
stainless steel pinions are available with a higher
corrosion resistance.
4 Stainless steel or Deltatone treated external steel
parts.
External parts are stainless steel or steel alloy with a
Deltatone® treatment.
www.Bettis.com
Fasteners:
Stainless steel
Technical data:
Coating
:Polyester non-TGIC based
powder coating
Salt spray test
:DIN 50021 / ASTM B117: 500h.
Max. temperature :-4°F to 176°F (-20° to + 80°C)
Color
:Bettis orange
Materials
:Housing :Aluminium alloy
:Pinion :High grade aluminum
alloy
:Fasteners:Stainless steel or alloy
steel with Deltatone treatment
:Tagplate :Stainless steel
Application
:Standard Bettis D-Series
pneumatic actuators.
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
D-Series
Sheet No.: DPI 7.01 Rev. A
Date: April 2010
Assembly modes
DD - Double acting actuator
1 = A-port pressurized
2 = B-port pressurized
All views are from above
Pistons are shown in inner
position
1
1
2
2
Left Piston
Pinion
position
A
B
Right Piston
STANDARD
MOUNTING
IN LINE
A
A B
B
Rotate complete
standard Mode A
actuator 90° and
rotate the visual
indicator back 90°.
MOUNTING
ACROSS LINE
Important:
MOUNTING
ACROSS LINE
Rotate complete
Mode "D"
actuator 90° and
rotate the visual
indicator back 90°.
C D
MOUNTING
IN LINE
When a standard "Mode-A"
actuator is re-assembled to
"Mode D", the end cap and
front stop-screws will adjust
the closed position. There is
no adjustment for the open
position!
2
1
A
B
www.Bettis.com Copyright © Emerson Process Management.
The information in this document is subject to change without notice.
2
1
Pistons turned
180°
(from standard)
Factory option:
Mode “D”
Pinion
A
B
Factory option:
Mode “D”
Housing
Data sheet
D-Series
Sheet No.: DPI 7.02 Rev. A
Date: April 2010
Assembly modes
DS - Single acting (Spring Return) actuator
1 = A-port pressurized
2 = Spring stroke
1
1
2
2
Left Piston
Pinion
position
All views are from above
Pistons are shown in inner
position
Right Piston
A
A
B
B
Spring-to-Close (ROTATION CW)
STANDARD
MOUNTING
IN LINE
A B
C D
MOUNTING
ACROSS LINE
MOUNTING
ACROSS LINE
Important:
MOUNTING
IN LINE
When a standard "Mode-A"
actuator is re-assembled to
"Mode D", the end cap and
front stop-screws will adjust
the closed position. There is
no adjustment for the open
position!
Spring-to-Open (ROTATION CCW)
Rotate complete
Mode “D”
actuator 90° and
rotate the visual
indicator back 90°.
2
1
A
B
www.Bettis.com Copyright © Emerson Process Management.
The information in this document is subject to change without notice.
Rotate complete
standard Mode A
actuator 90° and
rotate the visual
indicator back 90°.
2
1
Pistons turned
180°
(from standard)
Factory option:
Mode “D”
Pinion
A
B
Factory option:
Mode “D”
Housing
Data sheet
D-Series
Sheet No.: DPI 8.01 Rev. A
Date: April 2010
Springset configuration
DS - Single acting (Spring Return) actuator
Springsets
Bettis DS Single acting (Spring Return) actuators have
up to 3 different concentric springs on each side of the
actuator.
This allows up to 6 ballanced spring configurations as
shown below.
www.Bettis.com
inner spring
mid spring
outer spring
Spring set no. 1
Spring set no. 2
Spring set no. 3
inner spring
mid spring
inner spring
mid spring
Spring set no. 4
Spring set no. 5
Spring set no. 6
inner spring
outer spring
mid spring
outer spring
inner spring
mid spring
outer spring
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.:
Date:
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
D-Series
Data sheet
Sheet No.:
Date:
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
D-Series
Data sheet
Sheet No.:
Date:
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 477 4100 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
D-Series
Contact Us: Emerson Process Management, Valve Automation facilities at your nearest location:
NORTH & SOUTH AMERICA
MIDDLE EAST & AFRICA
EUROPE
ASIA PACIFIC
19200 Northwest Freeway
Houston, TX 77065
USA
T +1 281 477 4100
F +1 281 477 2809
P. O. Box 17033
Dubai
United Arab Emirates
T +971 4 811 8100
F +971 4 886 5465
Asveldweg 11
7556 BR Hengelo (O)
The Netherlands
T +31 74 256 1010
F +31 74 291 0938
No. 9 Gul Road
#01-02 Singapore 629361
T +65 6501 4600
F +65 6268 0028
2500 Park Avenue West
Mansfield, OH 44906
USA
T +1 419 529 4311
F +1 419 529 3688
P. O. Box 105958
Abu Dhabi
United Arab Emirates
T +971 2 697 2000
F +971 2 555 0364
Siemensring 112
47877 Willich
Germany
T +49 2154 499 660
F +49 2154 499 6613
13840 Pike Road
Missouri City, Texas 77489
USA
T +1 281 499 1561
F +1 281 499 8445
P. O. Box 3911
Al Khobar 31952
Saudi Arabia
T +966 3 814 7560
F +966 3 814 7570
Av. Hollingsworth,
325, Iporanga Sorocaba,
SP 18087-105
Brazil
T +55 15 3238 3788
F +55 15 3228 3300
P. O. Box 10305
Jubail 31961
Saudi Arabia
T +966 3 340 8650
F +966 3 340 8790
25, Rue de Villeneuve
Silic – BP 40434
94583 Rungis
France
T +33 1 49 79 73 00
F +33 1 49 79 73 99
P. O. Box 32281
Doha
Qatar
T +974 4 576777
F +974 4 315448
24 Angus Crescent
Longmeadow Business Estate
East P.O. Box 6908; Greenstone;
1616 Modderfontein, Extension 5
South Africa
T +27 11 451 3700
F +27 11 451 3800
Via Montello 71/73
20038 Seregno (Milan)
Italy
T +39 0362 2285 207
F +39 0362 2436 55
6 Bracken Hill
South West Industrial Estate
Peterlee SR8 2LS
United Kingdom
T +44 191 518 0020
F +44 191 518 0032
2A Szturmowa Str
02-678 Warsaw
Poland
T +48 22 45 89 237
F +48 22 45 89 231
C/ Francisco Gervás, 1
28108 Alcobendas – Madrid
Spain
T +34 0913 586 000
F +34 0913 589 145
9/F Gateway Building
No. 10 Ya Bao Road
Chaoyang District
Beijing 100020
P.R.China
T +86 10 5821 1188
F +86 10 5821 1100
No.1 Lai Yuan Road
Wuqing Development Area
Tianjin 301700
P.R.China
T +86 22 8212 3300
F +86 22 8212 3308
Lot 13112, Mukim Labu
Kawasan Perindustrian Nilai
71807 Nilai, Negeri Sembilan
Malaysia
T +60 6 799 2323
F +60 6 799 9942
471 Mountain Highway
Bayswater, Victoria 3153
Australia
T +61 3 9721 0200
F +61 3 9720 0588
Delphi B Wing, 601 & 602
6th Floor, Central Avenue
Powai, Mumbai – 400 076
India
T +91 22 6662 0566
F +91 22 6662 0500
Letnikovskaya Str. 10-2
115114 Moscow
Russia and FSU
T +7 495 981 98 11
F +7 495 981 98 10
All rights reserved.
No part of this publication may be copied or published by means of printing, photocopying, microfilm or otherwise without prior written consent of Emerson Process Management. This
restriction also applies to the corresponding drawings and diagrams.
Emerson Process Management has the right to change parts of the machine at any time without prior or direct notice to the client. The contents of this publication are subject to change
without notice.
This publication is to be used for the standard version of the machine only. Thus Emerson Process Management cannot be held responsible for any damage resulting from the application of
this publication to the version actually delivered to you.
For extra information as to adjustments, maintenance and repair, contact the technical department of your supplier.
This publication has been written with great care. However, Emerson Process Management cannot be held responsible, either for any errors occurring in this publication or for their
consequences.
©2013 Emerson Electric Co.
www.Bettis.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement