InSinkErator HCLASSICSS H-Classic-SS Instant Hot Water Dispenser System Spec Sheet

Add to my manuals
1 Pages

advertisement

InSinkErator HCLASSICSS H-Classic-SS Instant Hot Water Dispenser System Spec Sheet | Manualzz

Instant Hot Water Dispensers

The Next

Necessity

H-Classic-SS

Easy-grip handle to dispense instant near-boiling 200˚F water effortlessly

Dimensions

6"

Minimum 2" required from sink hole center to backsplash

1/4" Incoming

Water Supply

Inlet Tube

Flexible

Outlet Tube

Flexible

Vent Tube

5-4/5"

3-3/4"

10-7/8"

NOTE: Max counter thickness is 3".

6-3/4"

6-1/4"

Job Specifications

Submittal Sheet

Hot Only – Dispenses near-boiling

200°F water

• Includes 2/3-gallon hot water tank

• Easy to adjust temperature control

• Tool-free tank connections and dry start

protection to ease installation

• Provides 60 cups/hr of near-boiling water

• We Come To You ®

3-Year In-Home

Limited Warranty*

• 115 volts, 750 watts, 6.25 amps

• Available in chrome

Specifications

Capacity

Electrical

Thermostat

Insulation

2/3-gallon hot water tank dispenses 60 cups of 200˚F water per hour

115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug

Snap-action, adjustable from

160˚F to 210˚F

(factory pre-set at 200˚F)

Meets U.L. 94HF-1 flammabiltiy specification

Valve Instant, self-closing

Recommended

Supply Pressure

30-125 psi

Shipping Weight Approximately

7.4 lbs.

Required

Hole Diameter

1-1/4" – 1-1/2" standard sink hole

Sample Specification

Instant hot water dispenser(s) shall be

InSinkErator Model H-Classic-SS with

2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve.

Warranty:

3-year parts and in-home service.

* The complete InSinkErator warranty is included in the Care & Use

booklet packed with each unit.

US Patent Pending (tank enclosure)

Complies with

California Lead

Plumbing Law

HWD461-13G-45-10

USA

1-800-558-5700 www.insinkerator.com

Canada

1-800-558-5700 www.insinkerator.ca

Printed in USA

The Emerson logo is a trademark and a service mark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

©2013 InSinkErator, a business unit of

Emerson Electric Co. All Rights Reserved.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement