fluke master
Insulation
resistance
testing.
A complete solution—for every person.
Insulation resistance.
The latest test tools
from the testing experts.
“ You asked. We responded.
Now you have more insulation
testing choices than ever.”
0
Product Comparison Charts on page 7.
You asked Fluke for a full family of insulation resistance
testers. Now they’re finally here.
Time and again, electrical workers tell us about the
importance of testing insulation resistance. Insulation
resistance tools are critical to a preventative maintenance
program, and a staple for troubleshooting any number of
residential, industrial and commercial applications.
Now Fluke has a tool for every budget
and need, from compact handhelds to a portable
high-voltage 5 kV model. We even offer a full-featured
insulation tester with multimeter functions built right
in—it’s two products in one!
Every tester in the line is built to Fluke standards—in
other words, beyond your expectations. These tools are all
rugged, reliable, accurate and easy to
use, for lower ownership costs over the long haul…less
calibration costs, less repair and replacement costs and
longer product lifetime.
Each Fluke tester also provides you access to “how-to”
application notes, selected case studies and expert technical support—FREE.
For more about testing insulation, along with complete
details on the growing family of Fluke insulation resistance testers, just visit www.fluke.com/insulationtest.
A digital insulation tester
and full-featured multimeter—
two tools in one!
Fluke 1587/1577
Insulation Multimeters
Fluke customers told us they wanted an insulation tester
and a full-featured multimeter in one, compact product and
now we’ve delivered two!
Both offer the “two tools in one” feature set, combining
a digital insulation tester with a full-featured, true RMS
digital multimeter in a single, compact, handheld unit. The
result: maximum versatility for both troubleshooting and
preventative maintenance.
Whether you work on motors, generators, cables or
switch gear, Fluke insulation multimeters deliver impressive capability in a single unit. No longer do you need to
go back to the truck, shop, or tool crib to get the extra tool
you need to get the job done. They are rugged, reliable and
easy to use, just what you would expect from Fluke. It all
adds up to a breakthrough solution that saves you time
and money.
Key Features
• Insulation test
1587: 0.01 MΩ to 2 GΩ
1577: 0.1 MΩ to 600 MΩ
• Insulation test voltages
1587: 50 V, 100 V, 250 V, 500 V, 1000 V
1577: 500 V, 1000 V
• Auto-discharge of capacitive voltage
• Measure ac/dc voltage, dc millivolts, ac/dc
milliamps, resistance, and continuity
• Fluke 1587 includes capacitance, diode test,
temperature, min/max, and frequency
• Low-pass filter for variable-speed motor drive
measurements (1587 only)
Recommended for:
Fluke 1587: industrial plant maintenance,
industrial and utilities electricians,
field service contractors and commercial
HVAC/R technicians
Fluke 1577: electrical contractors and
commercial electricians
Product Comparison
Product
ChartsComparison
on page 7. Charts on page 7.
0
3
Insulation resistance testing
in the palm of your hand
Fluke 1507/1503
Insulation Resistance Testers
With their multiple test voltages, the compact Fluke 1507
and 1503 Insulation Testers are ideal for many troubleshooting, commissioning, and preventative maintenance
applications. Additional features, like the remote probe on
these tools, reduces the time needed to perform repetitive
testing.
The Fluke 1507 is the best compact, lightweight, handheld insulation tester for advanced industrial and electrical
insulation testing. Its full feature set offers the ability to
easily and quickly perform advanced insulation resistance
testing. Its handy size makes it easy to pack and use. And
its reasonable price makes it an excellent value.
For basic electrical insulation testing, choose the
compact Fluke 1503—a rugged, compact tool that handles
the most common tests at a most affordable price.
Recommended for:
Fluke 1507: electrical contractors,
industrial and commercial electricians
Fluke 1503: residential and
commercial electricians
0
4
Product
Product Comparison
Comparison Charts
Charts on
on page
page 7.
7.
Key Features
• Insulation test range
1507: 0.01 MΩ to 10 GΩ
1503: 0.1 MΩ to 2000 MΩ
• Insulation test voltages
1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000 V
• Save both time and money with automatic calculation
of Polarization Index and Dielectric Absorption Ratio
• Make repetitive tests simple and easy with the
Compare (Pass/Fail) function (1507 only)
• Repetitive or hard-to-reach testing is easy with the
remote test probe
• Live circuit detection prevents insulation test if
voltage > 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user
protection
• AC/DC voltage: 0.1 V to 600 V
• 200 mA Continuity
• Resistance: 0.01 Ω to 20.00 KΩ
• Remote probe, test leads, probes and alligator clips
included with each tester
• 1-year warranty
Insulation testing
you can depend on
Fluke 1520
MegOhmMeter
A proven workhorse, the 1520 can make up to 5,000
insulation resistance tests, more than any other Fluke
insulation tester, without changing batteries. A dual
analog/digital display makes it easy to use. A Lo-Ohms
function measures voltage and checks connections.
Thanks to superb accuracy, endurance and handheld size,
the 1520 is a long-standing tool of choice for demanding
plant and utilities work.
Key Features
• Large, backlit LCD with analog bar graph and
digital display
• Three output voltages for insulation resistance testing:
250 V, 500 V, 1000 V
• Insulation resistance testing up to 4000 MΩ; switches
automatically to voltage measurement when voltage
is greater than 30 V ac or 30 V dc.
• AC/DC voltage measurement up to 600 V
• Lo-Ohms function for testing connections
• Last reading memory display
• 4 C-cell batteries for up to 5,000 tests per EN61557-2,
with battery-life indicator and auto shut-off
• Auto-discharge of capacitive voltage charges
• Rugged, splash-proof case with impact-absorbing
holster
Recommended for:
Fluke 1520: industrial and
utilities electricians
Product Comparison
Product
ChartsComparison
on page 7. Charts on page 7.
0
5
Digital insulation
testing up to
5000 volts
Fluke 1550B
MegOhmMeter
For high-voltage, industrial-strength insulation
testing, reach for the portable Fluke 1550B. No one
makes a more portable 5 kV digital tool for troubleshooting, preventative maintenance and advanced
applications in high voltage environments.
Perfect for testing high-energy switchgear, motors,
generators and cables, the 1550B executes everything from
simple spot checks to timed tests and breakdown evaluations. It even stores test results and downloads them to
your PC via infrared port. The custom carrying case also
houses heavy-duty leads, probes and alligator clips for a
complete, rugged field-testing kit.
Recommended for:
Fluke 1550B: industrial and
utilities electricians
60
Product
Product Comparison
Comparison Charts
Charts on
on page
page 7.
7.
Key Features
• Standard test voltages of 250 V, 500 V, 1000 V, 2500 V,
5000 V for a wide range of equipment testing
• Measures resistances up to one teraohm
• Programmable test voltages available in 50 volt steps
from 250 to 1000 volts and 100 volt steps from 1000
to 5000 volts
• Automatic calculation of Dielectric Absorption (DAR)
and Polarization Index (PI) with no additional setup
• Easy set-ups save time and effort when conducting
“timed” and “ramp” tests of insulation breakdown
• Improved ramp function (0 to 5000 V dc) for
breakdown testing
• Autodischarge of capacitive voltage
• Runs off of high-capacity rechargeable batteries for
more testing between recharge
• Warning voltage function alerts the user that voltage
is present and gives the voltage reading up to
600 V ac or dc
• Measurements can now be stored in up to 99 memory
locations, with easy recall
• Includes improved FlukeView® Forms Software and
Optical Interface cable for easier downloading to a
®
Windows PC
• Guard system eliminates the effect of surface leakage
current on high-resistance measurements
• Large digital/analog LCD shows detailed measurement
data
• 2-year warranty
Choose the best fit
TWO IN ONE TOOLS
1587
1577
Test Voltages
IRT Range
1503
1507
1520
1550B
50 V, 100 V, 250 V,
500 V, 1000 V
500 V, 1000 V
500 V, 1000 V
50 V, 100 V, 250 V,
500 V, 1000 V
250 V, 500 V,
1000V
250 V, 500 V,
1000 V, 2500 V,
5000 V
0.01 MΩ 2 GΩ
0.1 MΩ 600 MΩ
0.1 MΩ 2000 MΩ
0.01 MΩ 10 GΩ
4 MΩ 4 GΩ
200 KΩ 1 TΩ
•
PI/DAR
Insulation Test Functionality
Auto Discharge
•
•
•
•
•
•
Pass/Fail
Comparison
Est. # of IRT Tests
Voltage > 30 V
Warning
1000
1000
2000
2000
5000
•
•
•
•
•
•
(last reading only)
(99 locations)
Memory
•
•
•
•
•
Lo Ohms
Display
Digital LCD
Digital LCD
Digital LCD/
Analog Bar Graph
(200 mA)
(200 mA)
•
•
•
•
•
•
•
Digital LCD
Digital LCD
•
•
•
•
Current
•
•
Resistance
•
•
Temperature
(contact)
•
Lo-Pass Filter
•
Capacitance
•
Diode Test
•
Frequency
•
MIN/MAX
•
Hold/Lock
•
•
•
•
Backlight
•
•
•
•
Continuity
AC/DC Volts
Battery
Digital LCD/
Analog Bar Graph
•
•
•
•
(Fluke View®
Forms Basic)
Software
Warranty
•
•
Timed Ramp Test
(Breakdown)
Remote Test Probe
Multimeter Functionality
•
3 years
3 years
1 year
1 year
3 years
2 years
4 AA (NEDA 15A
or IEC LR6)
4 AA (NEDA 15A
or IEC LR6)
4 AA (NEDA 15A
or IEC LR6)
4 AA (NEDA 15A
or IEC LR6)
4 C-cell (NEDA 14A
or IEC LR14)
Rechargable
Product Comparison Charts on page 7.
0
7
Fluke Combo Kits
Fluke has created two new combo kits to help maximize your
productivity and help you solve problems faster and reduce
downtime, all with significant savings over buying each product individually.
The products in each kit have been specifically selected for
both troubleshooting and preventative maintenance
applications.
Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment
and can significantly reduce both planned and unplanned
downtime. Unplanned downtime costs are
difficult to calculate, but often significant. For some industries, it
can represent 1 % to 3 % of revenue (potentially 30 % to 40 %
of profits) annually.
Fluke 1587 ET
Every need—and
every budget:
Fluke 1587 ET
Fluke 1587 MDT
Advanced Electrical
Troubleshooting Kit
Everything you need to troubleshoot electrical system problems
quickly and easily in one case!
Includes:
• With the Fluke 1587, perform
insulation tests, plus a
wide-range of DMM tasks
with confidence and ease
• Use the i400 with your Fluke
1587 to accurately measure
AC current without breaking
the circuit
• Check for hot spots and
measure temperature with
the Fluke 62 mini non-contact
thermometer
Advanced
Motor and Drive
Troubleshooting Kit
Everything you need to
troubleshoot motor and variable
frequency drive electrical
problems quickly and easily
in one case!
Includes:
• With the Fluke 1587, perform
insulation tests, plus a
wide-range of DMM tasks
with confidence and ease
• Use the i400 with your Fluke
1587 to accurately measure
AC current without breaking
the circuit
• Check the rotation of threephase motors easily and safely
with the Fluke 9040
Learn about the entire range
of Fluke insulation resistance
testers. See your Fluke sales
representative or visit
www.fluke.com/insulationtest
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com/
©2005 Fluke Corporation. All rights reserved.
Printed in U.S.A. 7/2005 2461452 D-US-N Rev A
Power Quality
The 5-Star
Solution
Pinpoint power quality problems faster
Fluke 430 Series Three-Phase Power Quality Analyzers
The Fluke 430 Series ThreePhase Power Quality Analyzers
Locate,
predict,
prevent
and
troubleshoot
power
problems
Measure all power parameters, find
events and anomalies in seconds
In industry, healthcare, and business,
in fact wherever electrical and
electronic equipment is indispensable,
power quality plays a critical role in
maintaining uptime. Non-linear loads,
switching, load changes and equipment
problems can result in poor power
quality. Poor power quality is not only
costly in terms of wasted energy and
unnecessary downtime, it’s also
dangerous and increases risk of equipment failure.
2
Discover the 3-phase, 4-channel, 5-star
power quality analyzers from Fluke to
help you maintain efficient power
systems. These tools give you the
power to analyze every parameter,
power-related event or anomaly faster,
easier, safer and in more detail than
ever before.
Power Quality
Analyze your power
network quickly and easily.
Analyze details individually or monitor everything
simultaneously.
•
•
•
•
Complete three-phase
troubleshooting tool:
Measure everything!
Measure virtually every power
system parameter. The 430 measures voltage, current, frequency,
power, power consumption (energy),
unbalance and flicker, tracks
harmonics, inter-harmonics and
captures events like dips and swells,
transients, interruptions, rapid
voltage changes and inrush.
Highest safety rating
First on the market that meets the
stringent CAT IV 600 V and CAT III
1000 V safety standard required for
measurements at the service
entrance.
AutoTrend: Don’t waste time
setting up recordings!
Ever look at measurement data and
wonder how it changes over time?
Just press a single button to get a
trend overview. No need to start a
separate measurement since every
measurement you see is always
automatically recorded. Instantly
zoom in on details and use cursors to
analyze while recording continues.
Automatic transient display:
Don’t miss an event
Capture up to 40 dips, swells,
interruptions or transients automatically. When an event occurs, voltage
and current waveform data are
stored for all three phases and
neutral allowing you to analyze
timing relationships and perform a
cause and effect analysis.
•
•
•
Four current and four voltage
channels
Four voltage inputs allow you to
measure phase-to-phase, phase to
neutral, and neutral to ground. Four
current inputs allow measurements
on three phases and neutral. This
instrument also supports all common
wiring schemes.
System-Monitor: Simultaneously
check all power quality parameters
One comprehensive overview gives
immediate insight into your power
system’s quality, checking conformity
to limits specified in EN50160 or to
your own custom limits. Instantly see
which parameters fall outside the
limits and drill down into detailed
event tables and trend graphs.
Fast and easy to use
Menu-driven interface on the highresolution color screen simplifies
operation. The screen refreshes
5-times faster than any other power
quality analyzer at 200 ms intervals.
Pinpoint
power
quality
problems
faster,
easier,
safer and
in greater
detail
3
The Fluke 430 Series ThreePhase Power Quality Analyzers
One tool
to do
the job
Locate, predict,
prevent and
troubleshoot.
Perform custom analysis and create reports
with FlukeView® Power Quality software.
Measurement data can also be exported to
common spreadsheet programs.
Highest
safety rating
Designed to help protect you
and your equipment against
electrical shock and fire, the
Fluke 430 Series analyzers,
accessories and charger
are all certified to meet the
stringent safety standards
for use in CAT IV 600 V and
CAT III 1000 V environments.
They are the first tools of
their kind to carry the
CAT IV rating so it can be
used at virtually all power
connections and outlets
in low-voltage power
distribution systems.
4
AutoTrend automatically records all displayed parameters in the background. Toggle between data and trend
view and use cursors and zoom to analyze measurements without interrupting the recording.
Quickly see the trend
Unique AutoTrend gives you fast
insight into changes over time. Every
displayed reading is automatically and
continuously recorded without having
to set up threshold levels or interval
times, or having to manually start the
process. You can quickly view trends
in voltage, current, frequency, power,
harmonics or flicker on all three
phases plus neutral. And you can
analyze the trends using the cursors
and zoom function – even while background recording continues.
Extensive data analysis
possibilities
The Fluke 430 Series provides three
ways to analyze measurements.
Cursors and zoom can be used ‘live’
while taking measurements, or ‘offline’
on stored measurement data. The
stored measurements can also be
transferred to a PC with FlukeView®
software. This software’s ‘view’ mode
allows cursors and zoom to be used on
stored datasets as if actually working
with the instrument.
Reporting your findings
Use FlukeView® Power Quality
Analyzer software, included as
standard equipment with the 434,
to collect screen captures, trend
plots, or datasets when it's time to
write a report.
Power Quality
Automatic
transient
display
Every time an event or
distortion on the voltage
waveform is detected, the
instrument triggers and
automatically stores voltage
and current waveforms on
all three phases and neutral.
• Capture up to 40 dips,
swells, interruptions and
transients.
• See voltage transients as
high as 6 kV and as fast
as 5 microseconds.
System-Monitor: Multi-parameter
power quality health check on one
display
A single push of the MONITOR button
brings up a single dashboard display of
rms voltage, harmonics, flicker, interruptions, rapid voltage changes, swells,
unbalance and frequency. The dashboard is updated live, showing
compliance of each parameter to
EN50160 limits or your own limits.
Color-coded bars clearly show which
parameters are inside (pass) or outside
limits (fail). During a Monitor session,
you can easily drill down to more
detail of any parameter and view and
capture its trend for a report.
Handheld unit delivered as a
complete package
The Fluke 430 series includes:
• Four dual range 40 A and 400 A
clamps and
• Five voltage test leads and clips
• Line adapter/battery charger
• Hard case for storage
Take it out of the box to start tackling
your most challenging power quality
problems immediately. The rugged
construction and 7-hour battery
operation make it ideal for demanding
field work.
The System-Monitor overview screen gives instant
insight into whether the voltage, harmonics, flicker,
frequency and the number of dips and swells fall
outside the set limits.
A detailed list is given of all events falling outside the
set limits. By scrolling through the event list and
selecting an event, the event can be analyzed in detail.
All relevant parameters are recorded so each event
can be analyzed in detail. Cursors are automatically
positioned at the selected event to easily view timing
relationships.
5
The Fluke 430 Series ThreePhase Power Quality Analyzers
The full color
display uses
region specific
industry-standard
color-coding
(user selectable)
to correlate
measurements
with actual
wiring.
Simple menu structure
with logical function
grouping gives
fast access to key
measurements.
Scope view shows
voltage and
current waveforms
for all three
phases. You can
toggle to a phasor
diagram at any
time.
Phasor diagram shows
voltage and current
unbalance, and helps
verify connections.
Record dips and
swells as short
as one half-cycle
with min/max/avg
readings.
Track harmonics up to
the 50th, and measure
and record THD in
accordance with
IEC61000-4-7
requirements.
Inrush function
automatically triggers
off of current and
captures start up
measurements on
motors and other
devices to help
determine trip levels.
Measure and record power (W), VA
and VARs. The 434 adds the ability to
record energy consumption.
6
Power Quality
More power
quality testing solutions
Fluke 43B power
quality analyzer
Combines the capabilities of a power quality analyzer, a
20 MHz scope and a multimeter in one handheld tool.
•
•
•
•
•
•
•
Measure power (W, VA, VAR) and power
factor (PF, DPF)
Calculate power and power factor on
balanced 3-phase loads
Measure voltage, current and power
harmonics
Measure dips and swells on a cycle-by-cycle
basis for up to 24 hours
Dual-channel, 20 MHz bandwidth digital
oscilloscope
Measure resistance, continuity and
capacitance, and test diodes
Measure temperature with optional
temperature probe
Fluke VR101S
The smart tool for system
voltage event monitoring
Detect dips, swells, transients
down to 1 µs, outages and
frequency variations on
single-phase mains. Featuring
user-selectable capture limits
that are downloaded from a
PC using Fluke EventView™
software and optical interface
cable (both supplied), the
VR101S is simply plugged into
the outlet under test.
Fluke offers a full suite of power quality
test tools to locate, predict, prevent and
troubleshoot power problems.
• Handheld troubleshooters for instant analysis
• Ready-to-use event loggers
• Full Disclosure power analyzers
• Power calibrators and standards backed by
Fluke metrology expertise
The Fluke power quality set of products offer
the highest level of performance and maintains
the Fluke promise of rugged and reliable test
tools.
7
Power Quality
Choose the right tool
434
Application
Inputs
Measurements
Vrms, Arms, Hz, W, VAR, VA, PF,
Cos ϕ (DPF), Crest Factors
Harmonics and THD (V,A,W), k-factor
Inter-harmonics
kWh and kVARh (forward and reverse),
kVAh, demand interval
A Fluke Company
Flicker (Plt, Pst, PF5)
Another solution
to help reduce your
maintenance costs.
Unbalance
Use the Raytek
ThermoView Ti30 during
power quality audits as
part of a preventive
maintenance program to
improve your uptime.
Real time scope/Phasor diagrams
ThermoView Ti30 thermal
imager - the first affordable
thermal imager specifically
designed for predictive maintenance, with just what
maintenance professionals
need to do preventative maintenance and troubleshooting.
• Radiometric capabilities
• Fast target scanning
• Full-featured software for
analysis and reporting
• Free 2-day training taught
by Snell Infrared
IEC61000-4-30 compliance
Memory
(screens/data)
Go to www.raytek.com
www.raytek.com for more
information.
Recorder/AutoTrend
System-Monitor
Dips and swells/Half cycle based
Transient display
Inrush current
EN50160 compliance
FlukeView software and interface cable
Safety rating
(Meets EN61010 European standards)
Battery life
433
Three-phase
4 voltage and 4 current
(for 3 phases and ground)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional*
Optional*
•
•
•
•
•
•
Optional*
Optional*
•
•
50/10
25/5 standard
50/10 Optional*
•
Optional*
CAT IV 600 V/CAT III 1000 V
Up to 7 hours/charge
* Optional functionality can be added with upgrade kit. For details see ordering information.
Add the 434 functionality to the 433
with the Fluke 433UGK Upgrade Kit
• Advanced functions upgrade (Inter-harmonics, energy,
transient display and inrush current, data memory extension)
• FlukeView® software SW43W
• USB Optical Cable
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
Ordering information
Fluke 433
Fluke 434
Fluke 433UGK
Power Quality Analyzer (three-phase)
Power Quality Analyzer (three-phase)
Upgrade Kit for Fluke 433
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries (425) 446-5500 or
Fax (425) 446-5116
Web access: http://www.fluke.com
©2004 Fluke Corporation. All rights reserved.
Printed in U.S.A. 9/2004 2166546 B-US-N Rev A
5020A Thermo-Hygrometer Graphical
temperature/humidity logger, pg. 11
63 Infrared Thermometer Research heating
and ventilation problems, pg. 12
HVAC/Indoor
Air Quality
Selection Guide
Volume 1, 2005
CO-220 Carbon Monoxide Meter
Stand alone CO meter, pg. 5
87V Digital Multimeter Industrial multimeter
with built-in thermometer, pg. 6
983 Particle Counter Troubleshoot
and maintain indoor air quality, pg. 4
Selection Guide
Air Composition
Model
See page
Measurements
Particle size
983
Particle Counter
4
CO-210
CO Probe (1)
5
0-1000 ppm
0-1000 ppm
Ti30
Thermal Imager
10
Fluke-63
IR Thermometer
12-13
Fluke-61
IR Thermometer
12-13
+40 ˚C (104 ºF)
+50 ºC (122 ºF)
+250 ºC (482 ºF)
J, K, T, E, N, R, S
+545 ºC
(1013 ºF)
+275 ºC
(527 ºF)
90:1, 225:1
12:1
8:1
20 % to 90 %
0 % to 100 %
0.3, 0.5, 1.0, 2.0,
5.0, 10.0 µm
Optical resolution
Relative humidity
IR Temperature
5020A
Thermo-Hygrometer
11
Concentration
Temperature
CO-220
CO Detector
5
Thermal Imaging
Vacuum
Pressure
Voltage ac/dc
Current ac/dc
Resistance
Frequency
Inrush current
(integration time)
Capacitance
Conductance
2
Data Storage
Data logging
Min/Max/Ave
Display Hold/Auto (Touch) Hold
5000 data points
No/Yes/No
Yes/No
Fast Min-Max
(1) Accessory for use with a digital multimeter with dc millivolt inputs.
400,000 readings
100 images
Yes/Yes
No/Yes/No
Yes/No
Yes/No
Yes/No
TC Temperature
Fluke 54
TC Thermometer
14
80PK-8
TC Clamp (1)
13
+ 1767 ºC
(3212 ºF)
+149 °C
(300 ºF)
Pressure
PV350
Pressure / Vac
16
HVAC Electrical Tools
(1)
T5-600
Electrical Tester
15
337
ClampMeter
9
1AC VoltAlert
Voltage Detector
16
16 DMM
179 DMM
87V DMM
8
7
6
+400 °C
(752 ºF)
+400 °C
(752 ºF)
+1090 ºC
(1994 ºF)
1000 V
76 cm Hg
(406.7 in H20)
3447 kPa
(499.9 psi)
600 V
600 V
600 V
1000 V
100 A
999.9 A
600 V ac
200 µA
10 A
10 A
1000 Ω
600 Ω
40 MΩ
50 MΩ
50 MΩ
100 kHz
200 kHz
400 Hz
100 ms
10 µF
10 µF
10 µF
60 nS
3
500 data points
Yes/Yes/Yes
Yes/Yes/No
Yes/No
Yes/No
Yes/Yes/No
Yes/Yes/Yes
Yes/Yes
Yes/Yes/Yes
Yes/Yes
250 µs
Particle Counter
New! Fluke 983 Particle Counter
Troubleshoot and maintain
indoor air quality
The new Fluke 983 Particle Counter, the preferred choice for HVAC and IAQ professionals,
measures temperature and relative humidity as
well as particle size. With expanded data
logging and six-channel particle size display,
the Fluke 983 allows users to run more tests
quickly, with less time spent cycling through
screens to obtain data. The Fluke 983 is lightweight and easy to use in any position, with a
comfortable hand strap and rugged holster.
The Fluke 983 Particle Counter offers:
• Selectable sample time, count data, and
programmable delay
• User-defined sample size (cubic feet or liters)
and temperature measurements
(°C or °F)
• Data displayed in totalize or concentration
modes
• Logged samples include date, time, particle
counts, sample volume, temperature and
relative humidity
Ordering information
Fluke-983 Particle
4 Counter
Each particle counter includes:
Certificate of Calibration (NIST),
Windows-compatible software
download utility, DB9 to
RS-232 adapter and cable,
Isokinetic probe, zero count
filter, high purity tubing,
1/8 in. hose barb adapter,
power supply, operation
manual, hard molded
plastic case
General specifications
• Simple user interface
• Bright white liquid crystal
display with backlight
• Compact and lightweight
Weight: 1.0 kg (2.2 lbs)
Dimensions: (W x L x D)
11.43 cm x 20.96 cm x 5.72 cm
(4.5 in x 8.25 in x 2.25 in)
Power: AC adapter, 12V dc
at 2.5 A, 90 to 250V ac, 50 to
60 Hz
Battery: Rechargeable
(NiMH, 4.8V at 4.5 Ah)
Battery live / recharge time:
8 hours / 2 hours
Operating temperature:
10 °C to 40 °C (50 °F to 104 °F),
20 % to 90 % relative humidity,
non-condensing
Safety: Meets 115B9921:1997
and CE standards
Calibration: PSL particles in air
(NIST traceable)
Summary specifications
6 size channels
0.3, 0.5, 1.0, 2.0, 5.0, 10.0 µm
Flow rate
0.1 cfm (2.83 L/min) controlled by internal pump
Count modes
Concentration, totalize, audio
Counting efficiency
50 % @ 0.3 µm; 100 % for particles > 0.45 µm (per JIS B9921:1997)
Zero count
1 count/5 minute (JIS B9921:1997)
Coincidence loss
5% at 2,000,000 particles per ft3
Relative humidity
± 7 %, 20 % to 90 % non-condensing
Temperature
± 3 ˚C, 10 °C to 40 °C (50 °F to 104 °F)
Data storage
5000 sample records (rotating buffer) of date, time, counts, relative
humidity, temperature, sample volumes, alarms, label
Alarms
Counts, low battery, sensor fail
Delay time
0 to 24 hours
Sample inlet
Isokinetic probe
Interface
RS-232 and RS-485 via RJ-45
Environmental
Operating: 10 °C to 40 °C (50 °F to 104 °F), 20 % to 90 % relative
humidity, non-condensing
Storage: -10 °C to 50 °C (14 °F to 122 °F), up to 90 % relative humidity,
non-condensing
CO Detectors
CO-220 Carbon Monoxide Meter
• Standalone CO meter that does not require a
•
•
•
•
digital multimeter
Large backlit LCD displays CO levels from
0 to 1000 ppm
Beeper triggers with increasing frequency as
CO levels rise
MAX hold function stores and displays the
maximum CO level
Automatic sensor zeroing and self-test upon
startup
CO-210 Carbon Monoxide Probe
•
•
•
Used as an accessory to a digital multimeter
with DC millivolt inputs
Displays CO level readings from 0 to
999 ppm, with a resolution of 1 ppm and
accuracy of ± 3 %
Also used as a standalone device with an
LED indicator and beeper that triggers with
increasing frequency as CO levels rise
CO-205 Aspirator Kit
The CO-205 flue gas
sampling accessory kit contains all the components
necessary to provide a clean
sample for the Fluke family
of gas measuring devices.
The CO-205 accessory kit
includes:
• Stainless steel sampling
tube
• Industrial-grade hand
operated aspirator to
draw flue sample
• Easily replaceable
particulate filter
• Specially designed nose
cap for connection to the
Fluke CO-210/220
5
Ordering information
Fluke-CO-205
Includes instruction sheet
Fluke-CO-210
Includes soft carrying case,
battery and instruction sheet
Fluke-CO-220
Includes soft carrying case,
battery and instruction sheet
Digital Multimeters
General specifications
Fluke 87V Digital Multimeter
Accuracy and diagnostic
functions for maximum
industrial productivity
The new Fluke 87V has improved measurement
functions, troubleshooting features, resolution
and accuracy to solve more problems on motor
drives and in plant automation, power distribution, and electro-mechanical equipment. The
87V operates very similar to the classic 87,
but with more problem-solving power, safety,
convenience and impact protection.
New features for maximum productivity:
• Unique function for accurate voltage and
frequency measurements on adjustable speed
motor drives and other electrically noisy
equipment
• Built-in thermometer conveniently allows
you to take temperature readings without
separate instrument
• Large digit display with bright two level
backlight makes the 87V easy to read
Ordering information
Fluke 87-5
Every Fluke 87V comes packaged with TL75 Test Leads,
AC72 Alligator Clips, holster,
6 9 V battery (installed), temperature probe, CD-ROM (user’s
manual and technical notes)
and operators guide.
Fluke 87-5/E
Kit comes packaged with
TL225 Test Leads, TP238
Removable Test Probes,
AC220 Plunger Style Alligator
Clips, 80BK Temperature
Probe, TPAK magnetic hanger
and durable carrying case.
Size: 201 x 98 x 52 mm
(with holster)
Weight: 355 g
Weight With Holster and
Flex-Stand: 624 g
Display
Digital: 6000 counts updates
4/sec. (19,999 counts in
high-resolution mode)
Analog: 32 segments,
updates 40/sec.
Frequency: 19,999 counts,
updates 3/sec at > 10 Hz.
Warranty: Lifetime
Battery life: Alkaline: ~400
hours typical, without backlight
Shock: 1 Meter drop per
IEC 61010-1:2001
Vibration; Per MIL-PRF-28800
for a Class 2 instrument
Fluke 87V/E Industrial
Electrician Combo Kit
Includes special accessories to
increase productivity.
Summary specifications
Function
Range and resolution
DC volts
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
Basic accuracy
0.05 %
AC volts
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
0.7 % (True-rms)
DC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
0.2 %
AC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
1.0 % (True-rms)
Temperature
(excl. probe)
-200 to 1090 °C (-328 to 1994 °F)
80BK
Temperature Probe
-40 to 260 °C (-40 to 500 °F)
Resistance
600.0 Ω, 6.000 kΩ, 60.00 kΩ, 600.0 kΩ, 6.000 MΩ, 50.00 MΩ
Capacitance
10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 9,999 µF
Frequency
199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz
1.0 %
2.2 °C or 2 %
0.2 %
1.0 %
0.005 %
Digital Multimeters
Fluke 179 Digital Multimeter
Versatile meter for maintenance,
field service and bench repair
Find most heating and ventilation problems
with this versatile multimeter. It is simple to use
and offers true-rms, several measurement functions, conformance to the latest safety
standards, and a large, easy to read display.
Features include:
• True-rms voltage and current measurements
• 0.09 % basic accuracy
• 6000 count resolution digital display with
analog bargraph and backlight
• Manual and automatic ranging
• Display Hold and Auto
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Temperature measurements
• Min/Max/Avg recording
• Smoothing mode allows filtering of rapidly
changing inputs
• Easy battery exchange without opening the
case
• Closed case calibration through front panel
• Ergonomic case with integrated protective
holster
• EN61010-1 CAT III 1000 V / CAT IV 600 V
• Measures twice as fast as other multimeters
General specifications
Size: 201 x 98 x 52 mm
(with holster)
Weight: 355 g
Weight with holster and
Flex-Stand: 624 g
Display
Digital: 6000 counts updates
4/sec. (19,999 counts in highresolution mode.)
Analog: 32 segments, updates
40/sec.
Frequency: 19,999 counts,
updates 3/sec at > 10 Hz.
Warranty: Lifetime
Battery life: Alkaline: ~400
hours typical, without backlight
Shock: 1 Meter drop per IEC
61010-1:2001
Vibration: Per MIL-PRF-28800
for a Class 2 instrument
7
Summary specifications
Function
Range and resolution
V dc
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
V ac1
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
± 1.0 % of reading
A dc
60.00 mA, 400.0 mA, 6.000 A, 10.00 A2
± 1.0 % of reading
A ac2
60.00 mA, 400.0 mA, 6.000 A, 10.00 A2
± 1.5 % of reading
Resistance
600.0 Ω, 6.000 kΩ, 60.00 kΩ, 600.0 kΩ, 6.000 MΩ, 50.00 MΩ
± 0.9 % of reading
Capacitance
1000 nF, 10.00 µF, 100.0 µF, 9999 µF
± 1.2 % of reading
Frequency3
99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz
± 0.1 % of reading
Temperature
-40 ºC to +400 ºC (-40 ºF to +752 ºF)
All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.
2
10 A continuous, 20 A for up to 30 seconds.
3
Voltage frequency is specified from 2 Hz to 100 kHz. Current Frequency is specified from 2 Hz to 30 kHz.
1
Basic accuracy
± 0.09 %
± 0.15 %
1.0 % of reading
Ordering information
Fluke-179 Digital
Multimeter
Meter is packaged with TL75
test leads, 9 V battery
(installed), 80BK Temperature
Probe and manual.
Digital Multimeters
Fluke 16 Multimeter with
Thermometer
Measures temperature and
microamperes
The Fluke 16 measures temperature quickly and
accurately. Standard equipment includes an
80BK integrated DMM temperature probe. A
microamp function is included for flame sensor
measurements down to 0.1 microampères. Use
the Fluke 16 to test motor start and run capacitors up to 10,000 microfarads.
Rely on the Fluke 16 to make your everyday
measurements:
• Up to 600 volts ac or dc
• Resistance up to 40 megohms
• Diode test
• Exceptionally fast continuity
General specifications
Size: 346 x 71 x 142 mm
Weight: 286 g
Warranty: 3 years
Battery life: Alkaline: ~ 650 hours typical
8
HVAC 16/322 Combo Kit
• Includes Fluke 16 Multimeter
Ordering information
Fluke-16 Digital
Multimeter
Meter comes packaged with
TL75 Test Leads, 9 V battery
(installed), C10 holster and
80BK Temperature Probe.
Fluke-16/322 HVAC
Combo Kit
•
•
•
•
with temperature
Fluke 322 compact clamp meter
TL75 hard point test lead set
80BK integrated temperature probe
C800 durable carrying case
Summary specifications
Function
Range and resolution
V dc
4000 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
Basic accuracy
± (0.9 % + 1)
V ac
4000 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
± (1.9 % + 3)
A dc
200.0 µA
± (1.0 % + 2)
A ac
200.0 µA
± (2.0 % + 3)
Resistance
400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ
± (0.9 % + 1)
Capacitance
1.000 µF, 10.00 µF, 100.0 µF, 1000 µF, 10,000 µF
± (1.9 % + 2)
± 10 % + 90 counts
Clamp Meters
Fluke 337 Clamp Meter
Take a new look at the way you
make current measurements
The Fluke 337 Clamp Meter is a true-rms clamp
meter that measures AC/DC current, voltage,
ohms, and motor start-up current. Its new,
ergonomic concept is shaped to fit your hand
and to access tight spots easily.
• Small body and jaws fit perfectly in your
hand and into tight places
• Handy display hold button keeps measurements on the display
• Meter controls are positioned so current
measurements can be done with one hand
(index finger on clamp opening lever and
thumb on rotary switch)
• Large, backlit display is easy-to-see
• In-rush current function for measuring starting current for motors, lighting, etc.
• Auto shut-off maximizes battery life so the
meter works when you need it
• Improved low current measurement accuracy
from new microprocessor technology
General specifications
Size: 250 mm x 80 mm x 40 mm
(9.875 in x 3.125 in x 1.625 in)
Weight: 310 g (11oz)
Warranty: Three years
Battery life: Alkaline
approximately 150 hours
continuous, Automatic
low battery indicator
MIN/MAX: Yes
Backlight: Yes
Display Hold: Yes
Max wire diameder: 1.2 in
Summary specifications
Function
Range
V dc
to 600.0 V
Basic accuracy
1 % + 5 counts
V ac
(True-rms)
to 600.0 V
1 % + 5 counts
(20 to 100 Hz)
A dc
0 to 999.9 A
2 % + 3 counts
A ac
(True-rms)
to 999.9 A
2 % + 5 counts
(10 to 100 Hz)
Inrush (Integration time)
100 mS
Resistance
600.0 Ω/6000 Ω
1.5 % + 5 counts
Frequency
to 400 Hz
0.5 % + 5 counts
Continuity
< 30 Ω
9
Ordering information
Fluke-337
Meter comes packaged with:
Coated instruction card, safety
information sheet, soft carrying
case, TL75 Test Leads, Two AA
Alkaline batteries
Thermal Imager
General specifications
Fluke Ti30 Thermal Imager
Everything needed
for everyday imaging
The affordable Fluke Ti30 Thermal Imager is an
unbeatable solution for predictive maintenance.
• Complete imaging solution including unlimited use InsideIR software and two
days of professional thermography training
• Designed for industrial use with storage
capacity of up to 100 images
• Displays both thermal image and temperature
• Use the Ti30 to detect hidden moisture behind
walls and in duct work and identifying
blockages within the heat exchange system
Summary specifications
Power: Rechargable battery
pack or 6AAs (not included)
Battery life: Minimum 5 hours
continuous use
Thermal analysis software:
InsideIR (included)
PC software operating
systems: Microsoft® Windows®
98®, 2000® or XP®
Weight (includes batteries):
1 kg (2.2 lb)
Warranty: 1 year (U.S. only)
Detector
Detector type
120 x160 thermal element uncooled focal plane array
microbolometer
NETD (Noise equivalent temp. difference)
200 mK
Thermal
Ordering information
Fluke-Ti30
Thermal Imager
Fluke-Ti30 packaged with:
docking station with universal
power adapter and USB
connection, hardshell carrying
10 case, USB field cable, rechargeable battery pack, interactive
CD, training presentation CD,
carrying pouch, wrist strap and
quick reference card.
The Fluke-Ti30 Thermal Imager
is sold exclusively through
thermography representatives.
To request a demonstration or
order a Ti30 imager, visit
www.fluke.com/thermography
or call (800) 866-5478.
Temperature range
-10 °C to 250 °C (14 °F to 482 °F)
Accuracy
±2 % or ±2 ºC (+/- 3 % or 3 °C from -10 to 0 °C)
Optical
Optical resolution
90:1
Slit response optical resolution
225:1
Minimum diameter measurement spot
7 mm (0.27 in) at 61cm (24 in)
Field of view (FOV)
17º Horizontal x 12.8º Vertical
Target sighting
Single laser dot (Meets IEC Class 2 & FDA Class II requirements)
Controls and adjustments
Focus
Focusable, 61cm (24 in) to infinity
Temperature scale
ºC or ºF selectable
Palettes
Gray, ironbow or rainbow
Measurement modes
Automatic, semi-automatic or manual
LCD backlight
Bright, dim, off-selectable
Adjustable emissivity
0.10 to 1.00 by 0.01
Reflected background temperature
-50 ºC to 460 ºC (-58 ºF to 860 ºF)
Environmental
Ambient operating temperature
-10 ºC to 50 ºC (14 ºF to 122 ºF)
Relative humidity
10 to 90 % non-condensing
Storage temperature
-25 ºC to 70 ºC (-13 ºF to158 ºF) [without batteries]
Other
Storage capacity
100 images
Image frame rate
20 Hz
Thermo-Hygrometer
Fluke 5020A Thermo-Hygrometer
Graphical temperature/humidity
logger
The Fluke 5020A offers unmatched precision
among environmental data loggers.
• Two channels measure ambient temperature
to ± 0.125°C and relative humidity to ± 1.5 %
• On-board memory holds up to 400,000
time/date-stamped readings; PC card holds
millions more
• Detachable probes contain their own
calibration data for easy recalibrations
• Optional software logs in real time or shows
graphical/statistical data
• User configurable display for trend graphs
and data
• Visual and audio alarms for numerous alarm
or fault conditions
Summary specifications
Feature
General specifications
Size: 4.9 H x 8.3 W x 2.0 D in
(125 x 211 x 51 mm))
Weight: 1.5 lb. (0.7 kg)
Power: 12 V dc from external
100-240 V ac power supply
Description
Temperature range
0 °C to 50 °C (32 °F to 122 °F)
Temperature accuracy
15 °C to 35 °C: ± 0.25 °C (calibrated)
0 °C to 15 °C, 35 °C to 50 °C: ± 0.5 °C (uncalibrated typical)
Delta temperature accuracy
± 0.025 °C for ± 1 °C changes within 15 °C to 35 °C
Temperature resolution
User selectable up to 0.001 °C
RH range
0 % to 100 % RH
RH accuracy
20 % to 70 % RH: +2 % RH (calibrated)
0 % to 20 % RH, 70 % to 100 % RH: ± 3 % RH
Delta humidity accuracy
± 1.0 % for ± 5 % changes within 20 % to 70 % RH
RH resolution
User selectable up to 0.01 %
Inputs
Up to two sensors, each measuring temperature and
relative humidity; remotable
Display
LCD, displays data graphically, numerically and
statistically; 16 setups are included
Memory (internal)
400,000 typical individual time-stamped readings
Alarms
Visual and audio alarms for temperature, temperature rate, RH, RH
rate, and fault conditions
Communications
RS-232 and IrDA
PC card interface
64 MB flash memory for downloading data to a PC
Operating range
0 °C to 50 °C
Calibration
Certificate of NIST-traceable calibration included
Ordering information
5020A ThermoHygrometer
Includes probe, wall-mount
bracket and RS-232 cable
11
Thermometers
Fluke 61 and 63 Infrared
Thermometers
Laser quick. Fluke tough.
Infrared thermometers are ideal tools for measuring surface temperatures of rotating, hard-toreach, electrically live, or dangerously hot
targets. These handheld portable tools enable
professionals to monitor the status of electrical
motors and research heating and ventilation
problems with ease.
Fluke 61 Infrared Thermometer
•
•
•
•
•
•
Fluke 61
•
Bright laser beam provides easy targeting
Display clearly supplies data at a glance
Shock-absorbing holster increases
ruggedness
0.2 °C (0.5 °F) resolution
Backlight illuminates the screen in the dark
Automatic sleep mode after seven seconds
extends battery life
Alkaline batteries provide 4000 typical
measurements
Fluke 63 Infrared Thermometer
•
•
•
•
•
•
12
Fluke 63
High-resolution optics
High accuracy: 1 % and repeatability: 0.5 %
MAX temperature display
Laser targeting
Backlit display
Expanded measurement range up to
535 °C (999 °F)
Fluke 61
General specifications
Size: 190 mm x 51 mm x 41 mm
(7.5 in x 2 in x 1.6 in)
Weight: 341 g (0.75 lb)
Warranty: One-year
Power: 9 V alkaline or NiCd
battery
Battery life: 12 hours
Fluke 63
General specifications
Size: 200 mm x 160 mm x 55 mm
(8 in x 6 in x 2 in)
Weight: 320 g (11 oz)
Warranty: One-year
Power: 9 V alkaline or NiCd
battery
Battery life: 10 hours with laser
and backlight on 40 hours with
laser and backlight off
Feature
61
Temperature range
-18 to 275 °C (0 to 525 °F)
63
-32 to 535 °C (-25 to 999 °F)
Response time
< 1 second
< 0.5 second (95% of reading)
Spectral response
7 to 18 µm
8 to 14 µm
Resolution
0.2 °C (0.5 °F)
0.2 °C (0.5 °F)
Emissivity
Fixed at 0.95
Fixed at 0.95
Repeatability
± 2 °C or ± 2 %,
whichever is greater
± 0.5 % or < ± 1 °C (± 2 °F),
whichever is greater
Ambient operating
temperature
0 °C to 50 °C (32 °F to 120 °F)
0 °C to 50 °C (32 °F to 120 °F)
Relative humidity
10 to 90 % RH
at <30 °C (86 °F) ambient
10 to 90 % RH non-condensing,
noncondensing, at < 50 °C (120 °F)
Storage temperature
-20 °C to 60 °C (-4 °F to 140 °F)
without battery
-20 °C to 60 °C (-13 °F to 158 °F)
without battery
Display hold
No
Yes
Tripod mounting
No
Yes
°C or °F selectable
Yes
Yes
Hard carrying case
No
Yes
Typical distance
1 m (3 ft)
Up to 2 m (6 ft) to target
Distance to spot ratio
8:1
12:1
Accuracy
± 3 ºC (5 ºF) for targets between
-18 ºC (0 ºF) to -1 ºC (30 ºF)
± 2 % of reading or 2 ºC (3.5 ºF)
for targets above -1 ºC (30 ºF) to
275 ºC (525 ºF) with the instrument
stable between 23 °C to 25 ºC
-32 °C to -26 °C (-25 °F to -15 °F):
± 3 °C (± 5 °F)
-26 °C to -18 °C (-15 °F to 0 °F):
± 2.5 °C (± 4 °F)
-18 °C to 23 °C (0 °F to 73 °F):
± 2 °C (± 3 °F)
23 °C to 510 °C (73 °F to 950 °F):
± 1 % of reading or ± 1 °C (± 2 °F),
whichever is greater
Above 510 °C (950 °F):
± 1.5 % of reading
80PK-8 Pipe Clamp
Temperature Probe
•
•
•
•
•
Type-K thermocouple for
fast temperature and superheat measurements of pipe
surfaces
Durable ribbon sensor
Measurement range:
-29 °C to 149 °C
(-20 °F to 300 °F) for pipe
diameters from 6.4 to 34.9 mm
(.25 in to 1.375 in)
One year warranty
Accessory for use with DMM
with dc millivolt input and
80AK DMM adapter
Ordering information
Fluke-61 Infrared
Thermometer
Meter is packaged with
holster, instruction sheet
and 9 V battery
Fluke-63 Infrared
Thermometer
Meter is packaged tripod
mounting hard case, operator’s
guide, users manual on CD-ROM
and 9 V Alkaline battery
80PK-8 Pipe Clamp
Temperature Probe
13
Thermometers
Fluke 54 Thermometer
Laboratory accuracy.
Wherever you go.
General specifications
Size: 17.3 mm x 8.6 mm x
3.8 mm (6.8 in x 3.4 in x 1.5 in)
Weight: 400 g
Batteries: 3 AA batteries;
typical 1000-hour life
14
The Fluke 54 Series II contact thermometer
offers fast response and laboratory accuracy
(0.05 % + 0.3 °C) in a rugged, handheld test tool.
• Relative time clock on MIN, MAX, and AVG
provides a time reference for major events
• Electronic Offset function allows compensation
of thermocouple errors to maximize overall
accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the
calibration seal
• Optional ToolPak™ accessory allows the thermometer to hang from
any metal object (with the rare earth magnet) or secure around a pipe
(with hook-and-loop straps) for hands-free operation.
• Large backlit dual display shows any combination of T1, T2, T1-T2,
plus MIN, MAX, or AVG.
• Additional thermocouple types R, S, and N (for a total of 7 different types)
• Recall function allows logged data to be easily reviewed on the meter display
• IR communication port allows data to be exported to optional FlukeView®
Forms Temperature PC software for further analysis and graphing
• Data Logging up to 500 points of data with user adjustable recording interval
Summary specifications
Feature
Ordering information
Fluke 54 II
Dual Input Digital Thermometer
includes: Impact absorbing
holster and two 80PK-1 beaded
probe thermocouples
Thermocouple types
K,J,T,E,N,R,S
Number of inputs
Dual
Time stamp
Time of day
Temperature measurement accuracy
(for temperatures above -100 °C)
Type J,K,T,E,N: ± [0.05 % + 0.3 °C (0.5 °F)]
Type R,S: ± [0.05 % + 0.4 °C (0.7 °F)]
Measurement range
(depending on thermocouple type)
-250 °C (-418 °F) to 1767 °C (3212 °F)
Display resolution
0.1 °C /°F/K < 100°
Operating temperature
-10 °C to 50 °C (14 °F to 122 °F)
Storage temperature
-40 °C to 60 °C (-40 °F to 140 °F)
Humidity
0 % to 90 %; 0 °C to 35 °C (32 °F to 95 °F),
0 % to 70 %; 0 °C to 50 °C (32 °F to 122 °F)
1° °C/°F/K > 1000°
Electrical Testers
Fluke T5-600 Electrical Tester
Electrical tester with
OpenJaw™ Current
Ordering information
T5-600
600 V Voltage, Continuity
and Current Tester
Meter is packaged with
detachable probes and
instruction sheet
The Fluke T5-600 Electrical Tester lets you
check voltage, continuity and current with one
compact tool. With the T5, all you have to do is
select volts, ohms, or current and the tester
does the rest. OpenJaw™ current lets you check
current up to 100A - without breaking the
circuit. Its tough test leads stow neatly in the
back of the tester, making it easy to tote the T5
in your tool pouch. Detachable SlimReach™ test
probes are customized for national electrical
standards. The test leads accept optional
accessories such as clips and specialty probes.
The optional H5 holster lets you clip the T5
onto your belt.
• Automatically measures volts ac and volts dc
with precise digital resolution
• Displays resistance to 1000 Ω
• Easy and accurate OpenJaw™ current
measurement
• Continuity beeper
• Compact design with neat probe storage
• Rugged enough to withstand a 10-foot (3 m)
drop
• Detachable SlimReach™ probe tips are
customized for national electrical standards
Available
in 600 V and 1000 V models
•
• Auto off mode to conserve battery life
Function
Range
Measure dc voltage
600 V
Measure ac voltage
600 V
Measure ac current (average)
100 A
Measure continuity
< 25 Ω
Measure resistance
1000 Ω
DC polarity indicator
Yes
Detachable probe tips with
optional probe tips styles
Yes
Safety rating
600 V Overvoltage CAT III
Warranty
Two-years
Fluke T5-600
General specifications
Size: 30.5 x 51 x 203 mm
Weight: 300 g
Warranty: 2 years
Battery life: 200 hour zinc
chloride, 400 hour alkaline
Battery type: Two AA
zinc chloride
15
Low battery indicator: Yes
Current sensor opening: 12.9 mm
Calibration cycle: 1 year
Test leads: Heavy duty, flexible
leads rated for 1000 V use. Field
replaceable leads terminate in
male shrouded banana plugs.
Probes: Detachable Slim-Reach™
probe included
Styles: TP4 4 mm round
Electrical Testers
Fluke VoltAlert™ 1AC
Easy-To-Use Voltage Detector
VoltAlert™ ac voltage tester from Fluke is easy
to use-just touch the tip to a terminal strip,
outlet, or cord. When the tip glows red, you
know there’s voltage in the line. Electricians,
maintenance, service, safety personnel, and
homeowners can quickly test for energized
circuits and defective grounds on the factory
floor, in the shop, or at home.
• Fits in a shirt pocket for convenience
• All outer surfaces are non-conductive for
safety
• Detects voltage without metallic contact
• Manufactured, printed and packaged in the
US
• Quickly locates the hot, neutral and ground
terminals in any receptacle
1AC
General specifications
Size: 146 mm L x 19 mm D
(5.75 in L x 0.75 in D)
Weight: 41 g with batteries
(1.45 oz)
Outer surface: Probe is
composed of injection molded
high-impact, non-flammable
PVC and ABS
HVAC
Pressure Testers
16
PV350 Pressure Vacuum Module
•
Ordering information
Fluke-1AC Voltage
Detector
PV350 Pressure Vacuum
Module
•
•
•
•
•
Compatible with all Fluke and most popular
DMMs
Digital pressure and vacuum measurements
in a single module
Transducer sealed in 316 stainless steel
compatible with a variety of liquids and gases
Measures vacuum to 76 cm Hg
Displays results in English (psig or Hg) or
metric (kPa or cm Hg) units
Measures pressure to 3447 kPa (500 psig)
Accessories
Test Leads and Probes
Test Lead and Probe in One
TL71 Premium
DMM Test Lead Set
•
•
•
•
•
Flexible silicone
insulated leads are heat and cold
resistant
Distinctive comfort grip probes
Recommended for µV
measurements
CAT III 1000 V, 10 A,
CAT IV 600 V, 10 A
Use with 16, 179,
87V DMM and 336 Clamp Meter
TL76 2 mm/4 mm
Test Lead Set
•
•
TL81A Deluxe Electronic Test Lead Set
•
•
•
•
•
•
•
22 piece set with quadfold pouch
Includes mini alligator clips, hooks and pincers for virtually
every electronic need
Slide-on lc probe tip adapter and test lead couplers
Both modular test leads and lead-probe combinations
CAT II 300 V
Use with 179 and 87V DMM
TL910 Electronic
Test Probes with
Replacement Tips
•
•
•
•
Small profile provides accessibility
Comes with 5 sets of replaceable
tips
Replacement tips: TP912
CAT III 1000 V, 3 A
Push-On Clips
AC72 Alligator Clips
•
•
•
•
Slide-on style for test probes
Jaws open to 8 mm
For use with TL71 and TL75 test lead
and probe sets
CAT III 1000 V, 10 A, CAT IV 600 V, 10 A
•
2 mm threaded probes with
removable 4 mm banana-style spring
contacts
Flexible 1.5 m
silicone leads
CAT III 1000 V,
CAT IV 600 V, 10 A
Use with 16, 179,
87V DMM and 336 Clamp Meter
Sets and Kits
TL220 Industrial
Test Lead Set
•
•
•
•
•
Starter kit for industrial applications
TP220 has round, stainless steel tip
Includes 1 pair: AC220, TP220, TL222
CAT III 1000 V, CAT IV 600 V, 10 A
Use with 16, 179, 87V DMM and 336
Clamp Meter
17
Accessories
AC Current Clamp
Adapters
i400s AC current clamp for oscilloscopes
and power quality analyzers
•
•
•
•
•
•
C12A Meter
Case
•
Pair a current clamp with your scope
or power quality meter to measure
up to 400 A ac
Only current clamp available
with a CAT IV 600 V /
CAT II 1000 V safety
rating makes them
ideal companions
for modern CAT
IV rated meters
Specially
designed to offer
maximum utility
in a compact shape
Take accurate current readings
without breaking the circuit
Soft non-slippery overmold handle
Can be used with DMMs with
optional PM9081/001 BNC/Banana adapter
•
PM9081
•
•
•
•
18
•
•
•
Adapts Type-K thermocouple
mini-connector to dual
banana plug inputs
Compatible with all
Fluke DMMs with
temperature
measurement functions
Measurement range and
accuracy is not affected by the 80AK
adapter
•
•
Compatible with all
Fluke DMMs with
temperature
measurement
functions
K-Type thermocouple
with standard
banana jack
Convenient one-piece
construction
Measurement range:
-40 °C to 260 °C (-40 °F to 500 °F)
•
•
AC285 SureGrip™
Alligator Clips
•
•
•
Multi-purpose tooth
pattern grips anything
from fine gauge wire
to a 3/4 in. nut
Nickel-plated steel jaws
CAT III 1000 V,
CAT IV 600 V, 10 A
Zippered carrying
case with
padding and
inside pocket
Holds large DMMs
and process
meters
C125 Meter Case
Zippered carrying
case with
detachable
external pouch
Holster
C10 Meter
Holster
•
•
Modular Clips (for use with test leads)
•
•
•
•
Insulated, nickel plated jaws
grip objects up to 3/8 in.
Blunt tip grabs round
screw heads
CAT III 1000 V,
CAT IV 600 V, 10 A
Zippered carrying
case with inside
pocket and
belt loop
Holds mid-sized
DMMs and
process meters
C25 Meter Case
80BK Integrated DMM
Temperature Probe
•
•
•
80AK DMM Adapter
Allows a digital multimeter to measure
up to 40,000 volts peak
1000:1 division ratio output
when connected to
10 MΩ multimeter
Ground clip included
Intended for low energy
applications that are referenced
to ground
AC220 SureGrip™
Alligator Clips
Zippered carrying
case with inside
pockets and
belt loop
For 110, 111, 112,
12 and 16 DMMs
C90 Meter Case
•
80K-40 High Voltage Probes
•
Dual Banana Plug 4 mm male to
female BNC Adapter
The set consists of two adapters
Temperature Accessories
High-Voltage Probes
•
Soft Cases
Snap on yellow
holster absorbs
shocks and protects meter from
rough handling
Fits Fluke 10
Series DMMs
Technical
Library
Fluke provides the tools and support to keep you
up-to-date on the latest in HVAC/R and IAQ
Visit www.fluke.com/user/support/appnotes for application
notes such as:
Evaluating Indoor Air Quality with the FLuke 983 Particle Counter
Information on conducting a basic IAQ investigation, interpreting the data and how to
understand particle counter readings. A cleanroom exercise is also included.
HVAC/R: Service Tips with Fluke Multimeter and Accessories
How to tackle some typical troubleshooting tasks in refrigeration, air conditioning, heat
pump and heating applications.
Troubleshooting HVAC/R Systems
Troubleshoot the refrigeration system while applying the principles of superheat
and sub-cooling to HVAC/R equipment.
Contact your local Fluke sales organization for the
following (in the United States, call 1-800-44-FLUKE,
outside the U.S. call +1-425-446-5500):
Air Conditioning and Refrigeration
Troubleshooting Guide Poster
2114638
Heating System Common
Test Point Poster
2114623
Ohm’s Law Poster
2100120
Pressure Temperature
Chart Poster
2114645
Understanding Safety
Categories Poster
2096630
Pressure Temperature
Pocket Card
1265816
19
Fluke Plus
keeps you on the edge
Service and repair
locations worldwide
FlukePlus membership rewards you with
benefits you can use and it’s FREE!
To contact Fluke or to locate an authorized
service center, call one of the following
telephone numbers:
USA: 1-888-99-FLUKE
(1-888-993-5853)
Canada: 1-800-36-FLUKE
(1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Other countries: +1-425-446-5500
Or visit the Fluke web site at www.fluke.com.
Sign up for the first members-only program created
for test tool users. Get exclusive access to:
•
•
•
•
•
Product tips and “how to” articles
Previews of the latest news and applications from Fluke
Exclusive offers and promotions
Direct connection to Fluke technical support
Advance notice about the hottest new products from Fluke
HVAC/R pressure temperature calculator
Calculate temperature and pressure anytime, anywhere
• Dual display of temperature and pressure
• Select from 14 refrigerant types
• Available for PC, Pocket PC, selected mobile phones and
Palm (OS 3.0 and higher)
For exclusive membership benefits, sign up at
www.fluke.com/flukeplus
Promotions included in FlukePlus
are open to U.S. residents only at this time.
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2005 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2005 2425959 B-US-N Rev A
Accessories
Selection Guide
Specialty
Test Leads
Cases and Holsters
Temperature
Current
16
i200
i200s
i400
i400s
80i-600A
i1000s
i2000flex
i3000s
i410
i1010
80AK
80BK
All 80PK probes
80PJ-1 & 80PJ-9
80PT-25
80T-1500U
80PJ-EXT
80PK-EXT
80PT-EXT
80CK-M
80CJM
C510
C520
C550
C12A
C23
C25
C33
C43
C50
C90
C125
C20
C100
C800
C10
H80M
H3
H5
ToolPak Meter Hanger
Standard Test Lead Input
TL220
TL223
TL238
TL80A
TL81A
TL71
TL76
FlukeView® Forms Software
PV350 (pressure)
FOM (fiber optic)
CO-210
80K-6, 80K-15, 80K-40
•
2
2
•
•
•
•
•
•
1
179
•
•
•
2
•
2
•
•
•
•
•
•
1
87V
•
•
•
2
•
2
•
•
•
•
•
•
1
54II
61
336
T5
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
21
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
dc
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(1) Requires 80AK (2) Requires PM9081/001 Adapter
•
•
Oscilloscopes for
field applications
Powerful ScopeMeter ® test capabilities:
• From 20 to 200 MHz bandwidth and up to 2.5 GS/s real-time sampling
• Up to seven hours operating time
• Now with FFT Analysis, advanced triggering and 3k memory length
All this power in your hand
See dynamic signal behavior
instantaneously
Thanks to the deeper memory, very small parts
of the waveform can be studied in full detail
using ‘zoom’.
ScopeMeter ® 190C and 190B
Series: Speed, performance
and analysis power
NEW! Deeper waveform
acquisition memory
Dual-input – 200, 100 or 60 MHz bandwidth
•
Four hours rechargeable NiMH battery pack
Up to 2.5 GS/s real-time sampling per input
Easier identification of traces,
everywhere
Up to 1000 V independently floating isolated inputs for 1000 V CAT II
and 600 V CAT III safety certification
The full-color display makes identification of
individual waveforms easier, particularly
when displaying large amplitude or multiple
overlapping waveforms on screen. On-screen
color labels, measurements and warnings are
clearly linked to specific waveforms.
See an English on-line demonstration,
go to www.fluke.com/scopemeter
A choice of bandwidth
The ScopeMeter 190C and 190B Series offer
up to 200 MHz bandwidth for capturing
high-frequency signals found in today’s
state-of-the-art electronics.
2
See what’s really happening
With a maximum real-time sampling rate
of 2.5 GS/s per input, you can see what
really happens, with 400 ps resolution. Both
inputs have their own digitizer, so you can
simultaneously acquire two waveforms and
analyze them with the highest resolution
and detail. If an anomaly flashes by on the
screen, just press the Replay button to see it
again. And thanks to the wider screen, you
will always see a 12 divisions time window
giving a far better overview of what’s
happening both before and after the trigger
event!
Frequency Spectrum shows an overview of
frequencies contained in a signal.
NEW! Frequency Spectrum Analysis
All 190C Color ScopeMeter models now
include Frequency Spectrum Analysis
functionality based on Fast Fourier
Transformation (FFT) analysis as a standard
feature. This enables you to identify the
individual frequency components contained
in a signal. The spectrum analysis function is
also handly for revealing the effects of
vibration, signal interference or crosstalk. An
automatic window function assures optimal
windowing, although you may manually
select your preferred time window.
High sampling rates give you the required
resolution for detailed signal analysis.
Dual-slope triggering used to capture the
eye-pattern on a digital datastream.
Advanced trigger modes
The waveform memory of all oscilloscopes
in both the 190B and 190C Series has been
enlarged to allow as many as 3000
samples per channel to be acquired. You can
use the ZOOM function to find tiny details in
a long waveform, for example, the color burst
in a video signal or a single impulse in a
complex data-stream. All models also allow
the high-resolution waveforms to be
transferred to a PC for later detailed analysis
using FlukeView ScopeMeter software.
For the more demanding applications, the ScopeMeter 190 Series
high-performance oscilloscopes offer specifications usually found on
top-end bench instruments. With up to 200 MHz bandwidth, 2.5 GS/s realtime sampling and a deep memory of 27,500 points per input they’re ideal
for engineers who need the full capabilities of a high-performance
oscilloscope in a handheld, battery powered instrument.
•
•
•
The Digital Persistence mode (Fluke 190C)
helps to find anomalies and to analyze
complex dynamic signals by showing the
waveforms amplitude distribution over time.
Digital Persistence uses multiple intensity
levels and user selectable decay time it’s as
if you’re looking at the display of an analog,
real time oscilloscope! The fast display
update rate that’s standard on all models
reveals signal changes instantaneously,
useful for instance when making adjustments
to a system under test.
The ScopeMeter 190 Series greatly
simplifies triggering with Connect-and-ViewTM
automatic triggering. Two new modes –
“n-cycle triggering” and “dual-slope
triggering” - have been added to the Fluke
190C Series to help you isolate the
phenomena of interest. N-cycle triggering
ensures you get a stable live image of a
signal, for example, in-frequency dividers
and clocked (synchronous) digital systems,
or to synchronize on bursts of pulses.
Dual-slope triggering enables the
oscilloscopes to trigger on both rising
and falling edges alike. This means that
any edge in the signal will act as a
trigger event and initiate a new waveform
acquisition, a most useful capability when
making eye-patterns from digital datastreams, or in conjunction with single-shot
phenomena. However, manual triggering is
sometimes required. Manual modes include
edge, delay, video and pulse width
triggering. A fully isolated external trigger
input is included for troubleshooting time
relationships between two input signals
synchronized to a third signal.
Digital Persistence mode gives analog scope-like
display of complex and modulated signals.
3
FlukeView ® Software
for documenting, archiving
and analysis
ScopeMeter 190 Series
Use TrendPlot™ to help find
intermittents, fast
The toughest faults to find are those
that happen only once in a while –
intermittents. They can be caused by bad
connections, dust, dirt, corrosion or simply
broken wiring or connectors. You may not be
around to see it – Fluke’s ScopeMeter will. In
this “paperless recorder” mode, you can plot
the minimum and maximum peak values and
average over time – up to 22 days. The two
inputs can plot any combination of volts,
amps, temperature, frequency and phase –
with time and date stamp – to help lead you
to the cause of those faults quickly.
The inrush current is measured on the part of
the waveform enclosed by the cursors.
NEW! Cursor-limited automatic
measurement
ScopeMeter 190C and 190B features
30 automatic measurements, cursors, zoom
and real-time clock. Now automatic power
and Vrms-measurements can be performed
on a specific, user identified portion of the
waveform using the cursors of the Fluke 190C
to define the time-window of interest. In this
way, the ScopeMeter 190C measures the
power within a specified time span, or the
rms-value of a voltage during a dedicated
period of time.
Automatic capture and replay
of 100 screens
Scope users know how frustrating it is
to see an one-time anomaly flash by never
to be seen again. Not with the ScopeMeter
190 Series! Now you can look back in time
with a touch of the replay button. In normal
use, the instrument continuously memorizes
the last 100 screens. Each time a new screen
is acquired, the oldest is discarded. At any
moment, you can “freeze” the last 100
screens and scroll through picture-by-picture
or replay as a “live” animation. Cursors can
be used for further analysis. You can even
use the advanced trigger capabilities to
capture up to 100 specific events. Two sets
of 100 captured screens with individual time
stamps can be stored for later recall or
download to a PC.
Pass/Fail testing of actual signal against a
reference template
Waveform Pass/Fail Testing
“Waveform reference” allows an acquired
trace to be stored and designated “reference
trace” for visual comparisons, or it can be
used as the reference for automatic
“Pass/Fail” testing (190C). Up to 100
individually matching (“Pass”) or nonmatching (“Fail”) waveforms can be stored
in the replay memory, allowing you to
monitor your system‘s behavior over a long
period of time, without having to be present!
4
Cursors and zoom featured by the 190 Series
help you to analyze the captured TrendPlot.
FlukeView for Windows®
helps you get more out of
your ScopeMeter ® by:
•
Documenting – transfer waveforms, screens and measurement
data from the ScopeMeter to a PC. Print or import the data into
your report.
•
Adding user text to individual ScopeMeter settings –
providing guidance to the operator when recalling a set-up.
•
Archiving – create a library of waveforms with your
comments for easy reference and comparison. Store
complete Replay cycles for analysis of waveform
changes. Store complete memory content of the
ScopeMeter on your PC for back-up purposes.
•
Waveform Compare – store reference waveforms,
add operator instructions, and send both to
the ScopeMeter for waveform comparison and
“Pass/Fail” testing.
•
Analysis – use cursors, perform spectrum analysis or
export data to other analysis programs.
•
Connection to a PC via an optically-isolated interface cable
– Software and cable come as separate items or as part of
a special value kit. This kit also includes a protective hard shell
carrying case for safe and convenient storage of instrument
and accessories.
Use the 27,500 points memory of ScopeRecord
and zoom in for maximum detail.
ScopeMeter
Special Value Kit
FlukeView Software and the optically
isolated interface cable come as separate
items, or as part of the special value
SCC-Kit. This kit contains:
• FlukeView Software (SW90W)
• Optically Isolated Interface Cable
(For USB)
• Protective Hard-Shell Carrying Case
(C190 or C120)
The SCC-kit can be ordered separately, or
with the main instrument by adding an “S”
to the main instrument type number, e.g.,
Fluke 199C/S (see Ordering Information on
back cover for more detailed information).
Deep memory for high-resolution
ScopeRecord™
The ScopeRecord memory stores 27,500
points per input or more, for high resolution
recording of events up to 48 hours, and
captures fast intermittents and glitches as
short as 50 ns. This continuous roll mode,
for example, stores events like motion
profiles, UPS, power supply and motor startups. All models also have a “Stop-on-Trigger”
in the ScopeRecord mode. This allows the
ScopeMeter to store waveform data until the
instrument is triggered or until a repetitive
trigger signal is interrupted. This way, the
instrument will, for example, automatically
recognize a power failure and store the
waveform data preceding it. And with 100 x
zoom, you can look at the smallest details,
like individual power cycles. Two of these
27,500 point recordings can be stored for
later analysis.
circuits. All inputs are safety certified for
measurements in 1000 V CAT II and 600 V
CAT III environments. And the standard
probes cover a wide application range from
mV to kV, making the 190C and 190B
ScopeMeter ideal for micro electronics to
electrical applications.
SCC120 Kit
Many more new functions
• Variable gain on channel A helps you
compare signals on the two inputs.
Vpwm measures effective voltage on motor
drive and frequency inverter outputs.
Measure from mV to kV –
fully isolated and safely!
The ScopeMeter 190C and 190B series have
three independently floating isolated inputs.
While conventional oscilloscopes can only
make measurements referenced to the line
power ground, measurements on each of the
Fluke ScopeMeter 190 series inputs can be
referenced to a different “low” level. This
enables measurements in mixed circuits
having different ground references, and also
eliminates the risk of accidental ground short
• The Vpwm measurement is for measuring
the effective rms output voltage of variable
speed motor drives and frequency
inverters.
SCC190 Kit
• The high-sensitivity setting of 2 mV/div
allows for measurements on low-level
signals, that are hard to make with the
average oscilloscope. (Fluke 190C)
• For medical imaging diagnostics or highresolution video applications, an optional
configuration is available with current
over time (mAs), high-resolution video
triggering (up to 2800 lines) and more.
5
As simple as one-two-three
In today’s complex systems, a meter
measurement just doesn’t give enough detail
to determine the cause of a fault. Signal
anomalies, dropouts and glitches that might
cause a machine to go down are best
displayed with an oscilloscope.
The ScopeMeter 124 and 123 meet
today’s need of simultaneously measuring
and checking waveforms. The unique
Connect-and-View™ triggering automatically
displays stable waveforms of virtually any
signal. It really is as easy as one-two-three!
Battery powered mobility
Up to seven hours of battery operation frees
you from mains outlets for true on-the-move
working. The handheld format and the
weight of just 1.2 kg make the instrument
easy to carry and to fit comfortably in your
hand. The rugged and drip proof case
assures long life and reliable operation in
the harshest industrial environments.
(See technical specifications for details on
battery life.)
The confidence to do a better job
Working under time pressure and in
cramped or difficult-to-reach locations
means you want to focus on the job at hand,
not on the test tool in your hand. That’s why
the ScopeMeter 120 Series has Connectand-View automatic triggering. You don’t
have to worry about triggering and
instrument settings and you have all the
information on screen to do the job right.
Check the starting capacitor of a motor
with the ScopeMeter 120 Series.
One test lead measures all
ScopeMeter ® 120 Series
High frequency waveform, meter,
capacitance and resistance measurements
as well as continuity checks are all covered
by the shielded test leads. No time wasted
finding or swapping leads. The included
accessories allow hook-up at test objects of
every dimension.
The compact ScopeMeter 120 Series is the rugged solution for industrial
troubleshooting and installation applications. It’s a truly integrated
test tool, with oscilloscope, multimeter and “paperless” recorder in one
affordable, easy-to-use instrument. Find answers fast to problems in
machinery, instrumentation, control and power systems.
•
•
•
•
•
Dual-input 40 MHz or 20 MHz digital oscilloscope
•
•
•
•
•
10:1 Voltage Probe included with Fluke 124 for reduced circuit loading
Two 5,000-count true-rms digital multimeters
A dual-input TrendPlot™ recorder
Connect-and-View™ trigger simplicity for hands-off operation
Shielded test leads for oscilloscope, resistance and continuity
measurements
Up to seven hours battery operation
600 V CAT III safety certified
Optically isolated interface
Rugged compact case
ScopeMeter 120 Series test
tools include innovative
shielded test leads covering
all scope and meter functions.
The bright display shows
scope waveforms and meter
readings in one screen. The
integrated holster stands up
to the roughest treatment.
6
Connect-and-View captures even
the most complex motor drive signals.
Dual-input measurement shows both
meter reading and waveform at the
same time.
A three-in-one tool
ScopeMeter 120 Series combines a
40 or 20 MHz dual input digital storage
oscilloscope, two true-rms digital
multimeters and a dual input TrendPlot™
recorder all in a compact, battery powered
instrument. Leave all other test tools behind
because the ScopeMeter 120 Series test tool
is the only one you’ll need.
Switch-on and open measure menu
to select from 26 scope and meter
measurements.
Floating measurements,
safety certified
While conventional oscilloscopes can only
make measurements referenced to power
line ground, the Fluke 120 Series makes
floating measurements so there’s no risk of
an accidental ground short circuit when
making a connection.
The Fluke ScopeMeter 120 Series test
tools and the included shielded test leads
are safety certified for measurements on 600
V CAT III industrial power systems. Using
the VPS40 probe, measurements up to 1000
V CAT II are fully supported. Via the optically
isolated interface, the ScopeMeter 120 can
be safely connected to a printer for direct
print-out or to a PC for later analysis and
documentation using FlukeView® Software
(for additional details about FlukeView
software see page 5).
Connect-and-View™ triggering
for an instant, stable display
Scope users know how difficult triggering
can be. Incorrect settings show unstable
and sometimes incorrect results. The unique
Connect-and-View function recognizes
signal patterns and automatically sets up
correct triggering. It provides a stable,
reliable and repeatable display of virtually
any signal, including motor drive and control
signals, without touching a button. Signal
changes are instantly recognized and
settings adjusted for a stable display. Benefit
from the speed and convenience when
measuring a number of test-points in quick
succession.
Cursors featured in the Fluke 124 can
help analyze the captured Trendplot.
Use TrendPlot™ to help find
intermittents, fast
The toughest faults to find are those
that happen only once in a while –
intermittents. They can be caused by bad
connections, dust, dirt, corrosion or simply
broken wiring or connectors. Other factors,
like line outages and sags or the starting
and stopping of a motor, can also cause a
machine to stop. You may not be around to
see it your Fluke ScopeMeter will. In this
“paperless recorder” mode, you can plot the
minimum and maximum peak values and
average over time up to 16 days. The two
inputs can plot any combination of volts,
amps, temperature, frequency and phase –
with time and date stamp – to help lead you
to the cause of those faults quickly.
7
Specifications – 120 and 190 Series ScopeMeter® Test Tools
190C ScopeMeter Series
190B ScopeMeter Series
120 ScopeMeter Series
Fluke 199C
Fluke 196C
Fluke 199B
Fluke 196B
Fluke 192B
Fluke 124
Bandwidth
200 MHz
100 MHz
200 MHz
100 MHz
60 MHz
40 MHz
20 MHz
Max real time sample rate
2.5 GS/s
1.0 GS/s
2.5 GS/s
1.0 GS/s
0.5 GS/s
25 MS/s
25 MS/s
Max record length (per input)
3000 Points
Number of Inputs
512 Points (min/max pairs)
2 Scope and 1 DMM (Isolated)
Input sensitivity
2 mV/div. to 100 V/div.
Fluke 123
2 Scope Or DMM
5 mV/div. to 100 V/div.
5 mV/div. to 500 V/div.
Independently isolated floating inputs
—
Display and Display Modes
Display
Color
Persistence
Monochrome
Monochrome
On/Off
—
Digital with variable decay
Envelope mode
Waveform compare
visual only
—
FFT
visual + automatic
—
—
Pass/fail testing
—
—
Triggering
Connect-and-View™ trigger
Edge, single, free run
Video
Video lines
Pulse width
—
External
With ITP 120 Option
Advanced Functions
Cursors
—
Zoom
—
Dual input Trendplot™
ScopeRecord™ mode
—
Automatic capture and replay last 100 screens
—
Waveform mathematics
—
Save setups and screens
10
True-rms multimeter
20
10
5000 Counts Volts, Amps, Ohms, Continuity, Diode, Temp
Safety, Power and Warranty
Safety (EN61010-1)
1000 V CAT II/600 V CAT III
Battery
Line power
7 hour NiMH
5 hour NiCd
Adapter/battery charger included
PC printer interface
Warranty
1
600 V CAT III1
4 hour Ni-MH
Using Optional Optically Isolated RS-232 adapter cable PM9080 or PAC91 printer adaptable cable
Three-year on main instrument/One-year on standard accessories
Max Input voltage 1000 V CAT II with VPS40, 40 MHz 10:1 Voltage probe.
Ordering Information
Fluke 199C
Fluke 199C/S
Fluke 196C
Fluke 196C/S
Fluke 199B
Fluke 199B/S
Fluke 196B
Fluke 196B/S
Fluke 192B
Fluke 192B/S
Fluke 124
Fluke 124/S
Fluke 123
Fluke 123/S
PM9080
SW90W
OC4USB
VPS40
BP120
BP130
BP190
SCC190
SCC120
Color ScopeMeter 200 MHz / 2.5 GS/s
Color ScopeMeter 200 MHz / 2.5 GS/s with SCC190
Color ScopeMeter 100 MHz / 1 GS/s
Color ScopeMeter 100 MHz / 1GS/s with SCC190
ScopeMeter 200 MHz / 2.5 GS/s
ScopeMeter 200 MHz / 2.5 GS/s with SCC190 kit
ScopeMeter 100 MHz / 1 GS/s
ScopeMeter 100 MHz / 1 GS/s with SCC190 kit
ScopeMeter 60 MHz / 500 MS/s
ScopeMeter 60 MHz / 500 MS/s with SCC190 kit
Industrial ScopeMeter, 40 MHz
Industrial ScopeMeter, 40 MHz, with SCC120 kit
Industrial ScopeMeter, 20 MHz
Industrial ScopeMeter, 20 MHz, with SCC120 kit
Optically Isolated adapter/cable
FlukeView ScopeMeter Software for Windows
Optically isolated interface cable for USB
40 MHz, 10:1 probe set for use with Fluke 120 Series
Rechargeable NiCd Battery for use with Fluke 120 Series
Rechargeable NiMH Battery for use with Fluke 120 Series
Rechargeable NiMH Battery for use with Fluke 190 Series
FlukeView Software + Cable + Case kit for Fluke 190 and 190C Series
Software - Cable - Case kit for Fluke 120 Series
•
ScopeMeter test tools come standard with a complete accessory package including line voltage adapter
and battery pack (installed), a set of voltage probes (one red and one grey) and test leads.
•
Optional accessories ordering information can be found in the technical datasheet or
on the Fluke web site.
Go to www.fluke.com/scopemeter for an on-line ScopeMeter
demonstration, or to see a fully functional software simulation, plus you
can download a specification sheet.
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa
Phone +31(0)40 2675 200
Fax +31 (0)40 2675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries
+1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2004 Fluke Corporation. Specifications
subject to change without notice.
All rights reserved. Printed in U.S.A.
12/2004 1629090 B-ENG-N Rev D
Non-contact Thermometers
from the #1 name in test tools
Industrial infrared thermometers for every application
62 Mini
576
574
572
You will find all the information you need in this
brochure to order and promote the newest
non-contact infrared thermometers from Fluke.
63
66
68
Professional non-contact
infrared thermometers
Just point and shoot.
Fluke offers a full line of industrial non-contact
infrared (IR) thermometers for a complete
range of applications. From quickly
identifying hot and cold spots for routine
troubleshooting to monitoring, logging, and
analyzing precise temperature as part of a
predictive maintenance program, Fluke has
the right tool for the job—even when the job
requires measuring the temperature of very
hot, very cold, hard-to-reach, moving, distant or
dangerous objects.
And Fluke backs its tools with the industry’s best
warranty and highest rated customer service.
When professional technicians need industrial
IR thermometers, they come to the number one
name in test tools.
Key markets:
• Predictive and preventive maintenance
Electrical and mechanical equipment
monitoring
• HVAC/R
Residential and commercial
troubleshooting
• Process monitoring
Product quality assurance
• Construction
Building inspections
• Petrochemical applications and
hazardous locations
Mechanically, thermally or chemically
hostile environments
Temperature measurement techniques:
• Spot: determine the absolute surface
temperature of a given spot on an object
• Temperature differential: compare two spot
measurements against each other
• Scanning: detect changes along a wide or
continuous target region
Fluke 62 Mini
For quick, basic temperature checks in applications
where the technician is close to the target, there’s
nothing simpler than using a Fluke 62 Mini—just aim
the laser sighting at the center of your target, pull the
trigger, and read the temperature on the large, backlit
LCD. Rugged enough for industrial environments with
its protective rubber “boot”, the 62 Mini also comes
with a handy storage pouch that can be snapped to
your belt, keeping quick temperature checks at your
fingertips.
Model
Temperature range
D:S (Distance to spot size) at 80 % energy
Laser sighting
Emissivity
Accuracy
(Assumes ambient operating temperature of 23 ºC [73 ºF])
Fluke 62 Mini
-30 to 500 ºC (–20 to 932 ºF)
10:1
Single point, offset
Preset 0.95
± 1 ºC (2 ºF) from 10 ºC to 30 ºC (50 ºF to 86 ºF),
± 1.5 % of reading or ± 1.5 ºC (3 ºF)
(whichever is greater over the balance of the range)
Response time
500 mSec
Nylon holster
•
Weight and dimensions
Power
Battery life (alkaline)
Display hold
LCD backlit
Warranty
200 g (7 oz) and 152 x 101 x 38 mm (6 x 4 x 1.5 in)
9 V alkaline or NiCD battery
12 hours
7 seconds
•
2 years, conditional
Included with the
62 Mini IR thermometer
The Fluke 62 Mini IR thermometer includes a 9 V
alkaline battery, illustrated user’s guide, protective
boot and convenient storage pouch.
Ordering information
To order Fluke products, contact your local Fluke representative.
Product ordering information for distributor purchasing agents.
Fluke
Model #
Fluke
Oracle #
UPC Code
Description
FLUKE-62
2433868
0 95969 29112 5 Infrared
Thermometer
Height
Length
Width
Weight
(Metric/English) (Metric/English) (Metric/English) (Metric/English)
Country
of origin
235 mm/
9.25 in
China
165 mm/
6.5 in
64 mm/
2.5 in
0.270 kg /
0.60 lb
Fluke 63, 66 and 68
Professional technicians select the rugged Fluke
63, 66 or 68 IR thermometers for maintenance
diagnostics in demanding environments. The
durability, optical resolution, accuracy and
extended temperature ranges make the Fluke 63,
66 and 68 the maintenance technician’s preferred
choice for daily MRO tasks. For special surfaces
such as concrete tiles or lead, the Fluke 66 and 68
offer adjustable emissivity.
Model
Temperature range
D:S (Distance to spot size)
at 90 % energy
Fluke 63
Fluke 66
Fluke 68
-32 to 535 ºC
(–25 to 999 ºF)
-32 to 600 ºC
(–25 to 1100 ºF)
-32 to 760 ºC
(–20 to 1400 ºF)
12:1
30:1
50:1
Laser sighting
Emissivity
Accuracy
(Assumes ambient
operating temperature
of 23 ºC [73 ºF])
Single point, offset
Preset 0.95
± 1 % of reading or ± 1 ºC (± 2 ºF), (whichever is greater over the balance of the range)
Response time
MAX, MIN, DIF and AVG
temperatures
Adjustable
500 mSec
MAX only
All
Recall last reading
HI/LO alarm
Protective hard case
Weight and dimensions
Power
Battery life (alkaline)
•
320 g (11 oz) and 200 x 160 x 55 mm (8 x 6 x 2 in)
9 V alkaline
20 hours with laser and backlight on 50% (Fluke 63) 40 hours with laser and backlight off (Fluke 66/68)
Display hold
7 seconds
LCD backlit
•
Warranty
•
•
2 years, conditional
Included with the
63, 66 and 68
IR thermometers
Accessories
80PR 60 RTD Temperature Probe
• Take both contact and non-contact readings at
the same time (thermometer displays results
concurrently)
• Temperature range:
-40 to 260 ºC
(-40 to 500 ºF);
accuracy ± 1 ºC
(± 2 ºF);
probe length:
9 cm (3.5 in);
probe diameter: 4.8 mm (.187 in);
cable length: 1 m (40 in)
The 63, 66 and 68 IR thermometers include 9 V
alkaline battery, operator’s guide, CD-ROM with
user’s manual and a durable hard case.
H6 Infrared Thermometer Holster
• Durable nylon holster specially designed
for Fluke 63, 66 or 68 units
• Snap-on loop attaches to belt
• Velcro closures
provide quick access
and secure storage
Ordering information
To order Fluke products, contact your local Fluke representative.
Product ordering information for distributor purchasing agents.
Fluke
Fluke
Model #
UPC Code
Oracle #
Description
Height
(Metric /
English)
Length
(Metric /
English)
Width
(Metric /
English)
Weight
(Metric /
English)
Country
of origin
Fluke-63
2148281
0 95969 26114 2
Infrared
Thermometer
25.4 cm/10 in
19.1 cm/7.5 in
6.9 cm/2.75 in
0.9370 kg/
2.06555 lb
China
Fluke-66
2148296
0 95969 26115 9
Adjustable
Infrared
Thermometer
25.4 cm/10 in
19.1 cm/7.5 in
6.9 cm/2.75 in
0.9370 kg/
2.06555 lb
China
Fluke-68
2148308
0 95969 26116 6
Adjustable
Infrared
Thermometer
25.4 cm/10 in
19.1 cm/7.5 in
6.9 cm/2.75 in
0.9370 kg/
2.06555 lb
China
80PR-60
2148313
0 95969 26117 3
RTD Probe
used on the
Fluke 66/68
30.2 cm/11.8 in
9.8 cm/3.8 in
2.9 cm/1.1 in
0.0528 kg/
0.1165 lb
China
H6
2152040
0 95969 26188 3
Holster used
on the Fluke
63/66/68
30.2 cm/11.8 in
5.7 cm/2.25 in
17.8 cm/7 in
0.1494 kg/
0.3295 lb
China
Fluke 572 and 574
More demanding applications require more precise
measurement and specialized features. That’s when
predictive maintenance professionals reach for the
Fluke 570 series. An even wider temperature range,
more powerful optics, a more precise sighting system,
faster response time and adjustable emissivity make
the 570 series the most accurate IR thermometer on
the market.
Advanced sighting
An extra bright coaxial three-dot laser sighting
highlights the center and diameter of the
measurement spot. The laser sighting appears twice
as bright to the human eye as a standard laser
sighting (while maintaining the same safety rating as
less bright lasers), making accurate sighting easier in
a variety of lighting conditions and distances.
Model
Fluke 572
Temperature Range
D:S (Distance to spot size)
at 90 % energy
Additional features of the 574
For maintenance professionals who need to monitor,
capture, analyze and report temperatures and
temperature trends, the 574 comes with 100-point
onboard data logging capabilities, customizable log
location names, programmable emissivity settings
and PC software for condition monitoring and process
control.
Fluke 574
Fluke 574-NI
-30 to 900 ºC (–25 to 1600 ºF)
60:1 [50:1 with close focus option (close focus not available with NI model)]
Laser sighting
extra bright* 3-dot, coaxial
(*twice as bright as perceived by the human eye, while maintaining the same safety rating as less bright lasers)
Emissivity
Accuracy
(Assumes ambient operating
temperature of 23 ºC [73 ºF])
Adjustable
± 0.75 % of reading or ± 0.75 ºC (± 1.5 ºF) (whichever is greater over the balance of the range)
Response time
Display hold (7 seconds)
LCD backlit
MAX, MIN temperatures
250 mSec
•
•
•
DIF, AVG temperatures
HI alarm
•
LO alarm
Bar graph display
•
100-point data logging
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Data graphing software
(Windows XP, NT, 2000
compatible, RS232 port required)
Protective hard case
Weight and dimensions
Power
Battery life (alkaline)
Warranty
•
472 g (1 lb 1 oz.) and
16.7 x 5 x 19.8 cm
(6.58 x 1.97 x 7.8 in)
480 g (1 lb 1 oz) and
16.7 x 5 x 19.8 cm
(6.58 x 1.97 x 7.8 in)
2 AA Batteries
2 AA Batteries/AC adapter
13 hours with laser and backlight on 50 %
2 years, conditional
Software for condition monitoring
and process control (574)
Options
• Graph measurements to visually review trends of
Nonincendive (574)
up to five log locations
• Tailor high/low alarms per inspection location
• Create and customize recognizable names and
emissivity values for each location
• Store up to 10,000 data points on a PC
• Export data for integration with
Maintenance, Repair and Operations (MRO) systems
Intended for use in harzardous locations, the
Fluke 574-NI unit does not release enough
electrical or thermal energy to ignite flammable
gasses or vapors under normal operational and
environmental conditions (Factory Mutual, a USA
organization, approved as Class I, Division 2
nonincendive device).
Close Focus
The 574-CF and 572-CF measure temperature
in very small areas (necessary in specialized
applications). [6 mm (.24 in) at 300 mm
(11.4 in)]. Close Focus 574-NI not available
Included with the
572 and 574
IR thermometers
NIST/DKD Traceable
Calibration Certificate
572 and 574 IR thermometers include 2 AA batteries,
user’s manual, and a durable hard case. The 574 also
includes AC power supply, thermocouple K,
RS 232 cable and condition monitoring software.
All models may be ordered with an optional
NIST traceable calibration certificate.
Accessories
Holster with Belt Clip
Durable padded holster
specially designed for Fluke 570
series IR thermometers
Analog Cable
Used for MV/degree output
(574)
Ordering information
To order Fluke products, contact your local Fluke representative.
Product ordering information for distributor purchasing agents.
Fluke
Fluke
Model #
UPC Code
Oracle #
Description
Height
(Metric/
English)
Length
(Metric/
English)
Width
(Metric /
English)
Weight
(Metric /
English)
Country
of origin
Fluke-572
2436583
0 95969 29157 6
Precision Infrared
Thermometer
22.9 cm/
9 in
27.7 cm/
10.4 in
8.4 cm/
3.3 in
1.1 kg/
2.43 lb
Germany
Fluke-572-CF
2436601
0 95969 29159 0
Precision Infrared
Thermometer
w/Close Focus
22.9 cm/
9 in
27.7 cm/
10.4 in
8.4 cm/
3.3 in
1.1 kg/
2.43 lb
Germany
Fluke-574
2436612
0 95969 29160 6
Precision Infrared
Thermometer
w/logging software
29.9 cm/
11.8 in
39.2 cm/
15.4 in
11 cm/
4.3 in
2.22 kg/
4.88 lb
Germany
Fluke-574-CF
2436647
0 95969 29163 7
Precision Infrared
Thermometer
w/Close Focus
29.9 cm/
11.8 in
39.2 cm/
15.4 in
11 cm/
4.3 in
2.22 kg/
4.88 lb
Germany
Fluke-574-NI
2436620
0 95969 29161 3
Precision Infrared
Thermometer
w/logging software
Nonincendive
29.9 cm/
11.8 in
39.2 cm/
15.4 in
11 cm/
4.3 in
2.22 kg/
4.88 lb
Germany
C570
2436565
0 95969 29155 2
Soft Case
25 cm/
10 in
17.8 cm/
7 in
6 cm/
2.3 in
.163 kg/
.36 lb
Poland
AN5
2437178
0 95969 29170 5
Cable Analog Output
2.5 cm/
.98 in
1.5 m/
5 ft
14 cm/
5.5 in
.055 kg/
.121 lb
Germany
Fluke 576
For the most complete temperature documentation
solution, predictive maintenance professionals use
the Fluke 576 photographic infrared thermometer. In
addition to all the features found in the 574 precision
IR thermometer, including advanced extra bright
coaxial three-dot laser sighting system; 100-point
data logging; customizable log names; programmable
emissivity values; and monitoring, analysis, and
reporting software, the Fluke 576 also integrates a
digital camera for photographic documentation.
Fluke 576 photo documentation
Simultaneously measure temperature and digitally
photograph the target and its surroundings. A wealth of
data is instantly captured in a digital photo: time
and date stamp, temperature data and location
name. Photos and data are easily downloaded
into the accompanying PC software. The addition
of the photos helps to enhance reports, to more
explicitly communicate problem areas with repair
personnel, and to ensure consistency when taking
repeated measurements over time when looking
for equipment condition trends.
Model
Temperature Range
D:S (Distance to spot size) at 90 % energy
Laser sighting
Emissivity
Accuracy
(Assumes ambient operating temperature of 23 ºC [73 ºF])
Response time
Display hold (7 seconds)
LCD backlit
MAX, MIN, DIF, AVG temperatures
HI/LO alarm
Bar graph display
100-points data logging
Fluke 576
-30 to 900 ºC (–25 to 1600 ºF)
60:1 (50:1 with Close Focus option)
3-dot, coaxial
Adjustable
± 0.75 % of reading or ± 0.75 ºC (± 1.5 ºF)
(whichever is greater over the balance of the range)
250 mSec
•
•
•
•
•
•
Maximum number of 640 x 480 pixel photos (VGA)
26
Maximum number of 320 x 240 pixel photos (VGA)
100
Data graphing & photo viewing software
(Windows XP and 2000 compatible) USB required
•
Image file format
Protective hard case
Weight and dimensions
Power
Battery life (alkaline)
.jpg files
•
580 g (1 lb 4 oz) and 16.7 x 5 x 23.8 cm (6.58 x 1.97 x 9.57 in)
2 AA Batteries / USB
8 hours (13 hours with photographic mode off)
50 photos w/flash; 200 photos without flash
Warranty
2 years, conditional
Software for condition monitoring and
process control
Options
• Scan thumbnails of measurement photos
• Paste .jpg files showing photo of each object
Close Focus
The Fluke 576 may be ordered in a close focus
model to measure very small areas (necessary in
specialized applications) [6 mm (.24 in) at
300 mm (11.4 in)].
measured with measurement data, date and time
into reports
• Continually monitor temperature, taking photos at
NIST/DKD Traceable
Calibration Certificate
alarm violations (while connected to PC)
All models may be ordered with an optional NIST
traceable calibration certificate.
Included with every
576 IR thermometer
Accessories
The 576 infrared thermometer includes 2 AA
batteries, a durable hard case, operator’s guide
on CD, thermocouple K probe, software and USB
computer cable.
Infrared Thermometer
Holster with Belt Clip
• Durable holster specially
designed for
Fluke 570 series
• Padded for increased
instrument protection
Analog Cable
For mv/degree
output
Ordering information
To order Fluke products, contact your local Fluke representative.
Product ordering information for distributor purchasing agents.
Fluke
Model #
Fluke
Oracle #
UPC Code
Description
Height
(Metric /
English)
Length
(Metric /
English)
Width
(Metric /
English)
Weight
(Metric /
English)
Country
of origin
Fluke-576
2436658
0 95969 29164 4
Precision
Photographic
Infrared Thermometer
w/logging software
29.9 cm/
11.8 in
39.2 cm/
15.4 in
11 cm/
4.3 in
2.07 kg/
4.57 lb
Germany
Fluke-576-CF
2436673
0 95969 29166 8
Precision
Photographic
Infrared Thermometer
w/logging software
29.9 cm/
11.8 in
39.2 cm/
15.4 in
11 cm/
4.3 in
2.07 kg/
4.57 lb
Germany
C570
2436565
0 95969 29155 2
Soft Case
25 cm/
10 in
17.8 cm/
7 in
6 cm/
2.3 in
.163 kg/
.36 lb
Poland
AN5
24327178
0 95969 29170 5
Cable Analog Output
2.5 cm/
.98 in
1.5 m
5 ft
14 cm/
5.5 in
.055 kg/
.121 lb
Germany
Get the information you need to
market these products instantly
from the Fluke Partner Portal
Download digital files and information to support
these products from the Fluke Partner Portal,
including:
• Product data sheets
• Press releases
• Photos
• Order status inquiry
If you have not already registered for access to the Fluke
Partner Portal, please go to https://support.fluke.com and
select Partner Portal: Fluke Industrial Tools from the pulldown menu, then click register. Complete the registration
form and submit it. Your submittal will be approved within
48 hours, at which time you will receive a confirming
e-mail with a reminder of the user name and password
you selected. Only Fluke distributors and sales staff, not
end-customers, may access the Fluke Partner Portal.
Promotional tools
To order, contact your local Fluke representative.
Description
Literature
Code
Fluke 62 Mini
Product Data Sheet
2437622
Fluke 63
Product Data Sheet
2150511
Fluke 66 and 68
Product Data Sheet
2153543
Fluke 572, 574
and 574-NI
Product Data Sheet
2437646
Fluke 576
Product Data Sheet
2437668
Infrared
Thermometry
Q and A
2437125
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090,
Everett, WA 98206-9090
USA
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116 or
Europe/M-East/Africa (31 40) 2675 200 or
Fax (31 40) 2 675 222 or
Canada (800) 36-FLUKE or
Fax (905) 890-6866
Other countries (425) 446-5500 or
Fax (425) 446-5116
Web access: http://www.fluke.com
©2005 Fluke Corporation. All rights reserved.
Specifications subject to change without notice.
Printed in U.S.A. 4/2005 2457141 B-US-N Rev A
Introducing the Fluke 971
Temperature Humidity Meter
The latest solution from Fluke
to meet the needs of your
HVAC and IAQ customers.
2509523 Rev B.indd 1
8/15/05 7:51:56 AM
New Fluke 971
Temperature
Humidity Meter:
Taking indoor
comfort to the
next degree
Assess thermal comfort conditions
quickly and accurately
•
•
•
Satisfy your customers with a solution that works. The
Fluke 971 provides the answers your customers need, with the
reliability and ruggedness that Fluke products are known for.
From the wet bulb and dew point calculations to the rugged
holster and belt clip, the Fluke 971 provides the features your
customers want with an eye towards protecting their investment
for some time to come.
Expand your existing Fluke HVAC / IAQ line. Be a single
source provider for Fluke HVAC / IAQ test and measurement
products, the preferred brand of HVAC and MRO professionals.
Partner with Fluke. The Fluke team will support you in
growing your IAQ business with extensive market initiatives
including lead generation and merchandising.
General specifications
Temperature range
Superior usability and
ergonomic design
•
•
•
•
Bright, backlit dual display of humidity
and temperature highlights readings
in less than ideal environments.
99 record storage capacity supports
data analysis across numerous
locations.
Durable, ergonomic holster with integrated belt clip allows for convenient
storage and retrieval in the field.
Wet bulb and dew point calculations
at the push of a button.
Customer market:
•
•
Operations and Maintenance and
HVAC Contractors will
respond to indoor climate complaints
and use the Fluke 971 to ensure
parameters remain within acceptable
ranges.
IAQ Specialists will monitor temperature and humidity conditions as part
of a comprehensive indoor air quality
investigation.
2509523 Rev B.indd 2
Temperature accuracy
0 °C to 45 °C
-20 °C to 0 °C and 45 °C to 60 °C
32 °F to 113 °F
-4 °F to 32 °F and 113 °F to 140 °F
Resolution
Response time (temperature)
Temperature sensor type
Relative humidity range
Relative humidity accuracy
(10 % to 90 % RH) @23 °C (73.4 °F)
(< 10 %, > 90 % RH) @23 °C (73.4 °F)
Humidity Sensor
Data Storage
Response time (humidity)
Operating temperature
Temperature
Humidity
Storage temperature
Weight
Dimensions
Battery Type
Battery Life
-20 °C to 60 °C
(-4 °F to 140 °F)
± 0.5 °C
± 1.0 °C
± 1.0 °F
± 2.0 °F
0.1 °C (0.1 °F)
500 ms
NTC
5 % to 95 % RH
± 2.5 %RH
± 5.0 %RH
Electronic capacitance
polymer film sensor.
99 points
For 90 % of total range
- 60 sec. with 1m/s air
movement
-20 °C to 60 °C
(-4 °F to 140 ° F)
0 °C to 55 °C
(32 °F to 131 °F)
-20 °C to 60 °C (-4 °F to
140 °F) at < 80 % R.H.
(with battery removed)
190 g (6.6 oz)
194 mm x 60 mm x 34 mm
(7.6 in x 2.4 in x 1.3 in)
4 x AAA alkaline batteries
200 hours
8/15/05 7:51:58 AM
Related tools and accessories
Fluke-983 Particle Counter
Lightweight and accurate in any position, the Fluke 983 has
a six-channel particle size display and extensive data-logging
capacity, making it the perfect tool for monitoring problem
areas. Use it to respond to building occupant complaints and
monitor air particle concentrations in sensitive areas such as
cleanrooms, hospitals, and food and beverage plants.
Fluke CO-220 Carbon Monoxide Meter
CO meter measures levels from 0 to 1000 ppm, with an
audible signal triggered more frequently as CO levels rise.
Used to detect dangerous CO leaks. CO-220 responds very
quickly to ambient changes in carbon monoxide concentration
without the use of a pump. Perfect for professionals who need
to measure CO levels where the accumulation of combustion
gas is possible.
Fluke CO-210 Carbon Monoxide Probe
Use as a standalone device or as an accessory to a digital
multimeter with DC millivolt inputs. The CO-210 displays CO
level readings from 0 to 999 ppm, with a resolution of 1 ppm.
VoltAlert™ – 1AC-II, 1LAC-II
The next generation voltage testers from
Fluke are easy to use—just touch the tip to
a terminal strip, outlet, or cord. When the
tip glows red and the unit beeps, you know
there’s voltage in the line. Electricians,
maintenance, service, safety personnel, and
homeowners can quickly test for energized
circuits and defective grounds on the factory
floor, in the shop, or at home.
•
•
•
•
The 1AC-II using Fluke Voltbeat™ technology continually tests its battery and
circuitry, so you know it’s working.
The VoltAlert™ is a Category IV – 1000 V
product, the highest rating of its kind and
important for improved user protection.
Voltage detection of 90 V to 1000 V ac,
plus a 20 V to 90 V ac low voltage model.
It is rugged, reliable, and has a two-year
warranty.
Ordering Information
Product ordering information for distributor purchasing agents
To order Fluke products, please contact your local Fluke representative.
Fluke
Fluke
Model # oracle #
UPC code
Description
Height
Metric (English)
Length
Metric (English)
Width
Metric (English)
Weight
Metric (English)
Country
of Origin
971
2418208
0 95969 28751 7
Temperature
Humidity Meter
6.1 cm
(2.4 in.)
31.5 cm
(12.4 in)
17.78 cm
(7.0 in)
0.32 kg
(0.7 lbs)
Taiwan
983
2414646
0 95969 28697 8
Particle Counter
31.75 cm
(12.5 in)
15.88 cm
(6.25 in)
34.93 cm
(13.75 in)
3.8 kg
(8.4 lbs)
USA
CO-210
664706
0 95969 06179 7
Carbon Monoxide
Probe
6.35 cm
(2.5 in)
21.59 cm
(8.5 in)
10.92 cm
(4.3 in)
0.45 kg
(1.0 lb)
Canada
CO-220
664711
0 95969 06180 3
Carbon Monoxide
Meter
6.35 cm
(2.5 in)
23.88 cm
(9.4 in)
10.92 cm
(4.3 in)
0.45 kg
(1.0 lb)
Canada
1AC-A1
-II
2432932
0 95969 29078 4
ACV Detector 90 25.4 cm
1000 V Eng, Frn, Spn (10 in)
3.92 cm
(1.54 in)
18.4 cm
(7.25 in)
0.15 kg
(0.34 lb)
China
1AC-A2
-II
2432944
0 95969 29079 1
ACV Detector 90 1000V Por, Jpn, TCh
25.4 cm
(10 in)
3.92 cm
(1.54 in)
18.4 cm
(7.25 in)
0.15 kg
(0.34 lb)
China
1AC-P1
-II
2433000
0 95969 29085 2
ACV Detector 200 1000V Eng, Thai, Ch
25.4 cm
(10 in)
3.92 cm
(1.54 in)
18.4 cm
(7.25 in)
0.15 kg
(0.34 lb)
China
1LAC-A1 2433021
-II
0 95969 29087 6
LowV Detector 20 90 V Eng, Frn, Spn
25.4 cm
(10 in)
3.92 cm
(1.54 in)
18.4 cm
(7.25 in)
0.15 kg
(0.34 lb)
China
2509523 Rev B.indd 3
8/15/05 7:52:07 AM
Get the information
you need to market
these products
instantly through
the Partner Portal.
Download digital files and information
to support these products from the Fluke
Products Portal, including
• Product data sheets
• Press releases
• Photos
If you have not already registered for
access to the Fluke Partner Portal, please
go to http://support.fluke.com and
select Partner Portal: Fluke Industrial Tools
from the pull down menu, then click “Register.” Complete the registration form and
submit it. Your submittal will be approved
within 48 hours, at which time you will
receive a confirmation e-mail with a
reminder of the user name and password
you selected. Only Fluke distributors and
sales staff, not end-user
customers,
may access
the Fluke
Partner Portal.
Promotional Tools
To order, contact your local Fluke representative.
Description
Literature Code
Fluke HVAC/IAQ
Selection Guide
2425959
Fluke 971 Data Sheet
2457037
Fluke 971 Introduction
CD-ROM (contains
images, press release
and literature)
2517561
Application note:
Managing air comfort
with relative humidity
tests
2522930
Case study: Specific
HVAC applications for
the Fluke 971 Relative
Humidity Meter
2524516
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116 or
Europe/M-East/Africa (31 40) 2675 200 or
Fax (31 40) 2 675 222 or
Canada (800) 36-FLUKE or
Fax (905) 890-6866
Other countries (425) 446-5500 or
Fax (425) 446-5116
Web access: http://www.fluke.com
©2005 Fluke Corporation. All rights reserved.
Specifications subject to change without notice.
Printed in U.S.A. 8/2005 2509523 B-EN-N Rev B
2509523 Rev B.indd 4
8/15/05 7:52:14 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement