luxCONTROL lighting control system comfortDIM DALI TOUCHPANEL 02 Operating and control unit Product description •Control panels and controllers for DALI systems •For controlling multiple luminaire groups and calling up preset lighting scenes •Flexible design: individual design can be used •Multi-master compatible: Multiple control modules are possible in a DALI system •Power supply via DALI line •Individual adjustment of the control panel and button assignments with configuration software •Setting group addresses or “broadcast” •Tunable white (colour converter) control (colour temperature along ø6 •Setting scenes 3,1 60 94 111,5 12,5 the Planckian Locus) •5-year guarantee Supply via DALI cable Current draw 6 mA Output DALI Ambient temperature ta 0 ... +50 °C Storage temperature ts 0 ... +50 °C Humidity 5 % ... max. 85 % (non-condensing) Type of protection IP20 Casing material ABS Casing colour RAL 9010 49,5 Technical data 60 64,5 82,5 9,5 8 17 Ordering data Type Article number Packaging, carton Weight per pc. DALI TOUCHPANEL 02 white 28000022 1 pc(s). 0.115 kg È Wiring diagrams and installation examples, page 2 Data sheet 10/15-CO018-6 Subject to change without notice. www.tridonic.com 1 luxCONTROL lighting control system comfortDIM The DALI TOUCHPANEL 02 is a multifunctional device for the DALI circuit. It combines the functions of DALI-GC and DALI-SC in a single module and has six freely definable buttons. The six buttons are configured using the masterCONFIGURATOR (since V2.6). The following configurations are possible: • On/off switching of individual addresses, groups or broadcast • Up/down fading of individual addresses, groups or broadcast • Scene selections Via the software masterCONFIGURATOR (since V2.60) it is possible to configure the panel for tunable white applications. The layout is configurable to control individual addresses, groups or broadcast. For further information please refer to the DALI TOUCHPANEL 02 manual on www.tridonic.com. The DALI TOUCHPANEL 02 offers a high degree of design flexibility. The user interface can be customised with interchangeable layout cards. The DALI TOUCHPANEL 02 is multi-master-compatible, which means that several control modules can be installed in parallel in a DALI system. Standards EN 61347-2-11 EN 61547 EN 55015 Wiring Wiring type and cross section wire preparation: 1.0 – 2.5 mm² L N DALI PS PCA EXCEL one4all PCA EXCEL one4all 8 – 9 mm DALI DALI GC DALI GC The wiring can be solid wire or stranded wire with a cross-section of 1.0 to 2.5 mm². DALI SC Installation: • The DALI TOUCHPANEL 02 can be mounted on the mounting box. • The DALI TOUCHPANEL 02 must not be connected to the mains. It is supplied directly via the DALI signal line. • DALI signals are not SELV. Therefore the same procedures should be applied as working with mains voltage. • The DALI TOUCHPANEL 02 allows multi master operation. Multiple control modules can be used on the same comfortDIM system. Glow wire test according to IEC 60598-1 650 °C passed. DALI standard DALI TOUCHPANEL 02 is designed to control control gear with DALI standard IEC 60929 (DALI V0) and IEC 62386 (DALI V1). General settings Button Button 1 Button 2 Button 3 Button 4 Button 5 Button 6 Default values Scene 1 Switch on; dim brighter Scene 2 Dim darker Scene 3 Switch off Operating area Broadcast Data sheet 10/15-CO018-6 Subject to change without notice. www.tridonic.com 2
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021