Genesis LER800 Series Die-Cast Aluminum Exit Sign FEATURES

Project/Location:
Contractor:
Date:
Genesis LER800 Series
™
Prepared by:
Die-Cast Aluminum Exit Sign
FEATURES
TYPICAL SPECIFICATIONS
•Durable, powder-coated Die-Cast construction
•Slim contoured body design with brushed aluminum faceplate
(single or double face option)
•Diagnostic/self-test feature comes standard on all Self-Powered units
•Universal mounting – wall, end or ceiling mounting
•100% bright, even illumination in both normal and emergency operation
•Long-life, energy-efficient, ALINGAP technology LED light source
reduces maintenance and energy costs
•Energy efficient – consumes less than 3W
•Maintenance-free, long-life sealed Nickel-Cadmium battery
•Normal AC and emergency DC operation – 120 to 347V universal AC
input; 6 to 48V universal DC input
•NEXUS® compatible (for more information on NEXUS®, please consult
your sales representative)
•CSA certified, meets or exceeds C860 requirements
DIMENSIONS
Supply and install the Lumacell® LER800 Series LED Exit Signs. The
equipment shall operate with universal two-wire AC input voltage from 120VAC
to 347VAC at less than 3W and universal two-wire DC input voltage from
6VDC to 48VDC at less than 1.5W for single and double face signs. The
faceplate(s) and the back plate shall snap together and shall be made of die
cast aluminum. The light source shall be light emitting diodes (LED). The LED
lamps shall provide illumination in normal and emergency operation and shall
be mounted inside the exit on a plastic frame/reflector.
Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be
mounted behind the legend to provide the 6” high by 3/4” stroke letters with
even illumination.
The Self-Powered model shall stay illuminated during emergency operation
for at least 90 minutes (red) and at least 60 minutes (green) upon AC failure.
The selfpowered model shall include self-testing and self-diagnostic functions:
the equipment shall automatically test itself for 5 minutes every 30 days, 30
minutes every 60 days and 90 minutes annually. A “Service Required” lamp
shall be located near the test switch and flash in the case of a fault detection.
A two-LED diagnostic display shall be located inside the equipment and shall
be capable of identifying the source of failure that may occur (battery, charger
circuitry, or LED lamp failure).
The Exit Sign shall be CSA-C860 approved.
The equipment shall be Lumacell® Model:
.
WIRE GUARDS
Dimensions are approximate and subject to change.
460.0079-L
87/8” [23 cm]
93/4” [24.8 cm]
45/8” [11.8 cm]
61/4” [16 cm]
Lumacell Model:
131/8” [33 cm]
13/4” [4.3 cm]
14” [35 cm]
Wall Mount
460.0027-L
End Mount
460.0028-L
Ceiling Mount
POWER CONSUMPTION
MODEL
AC SPECS
AC/DC red
120/347VAC
Less than 3W
DC SPECS
6 to 48VDC
Less than 1.5W
AC/DC green
120/347VAC
Less than 3W
6 to 48VDC
Less than 1.5W
Self-Powered red
120/347VAC
Less than 3W
Ni-Cd Battery
Min. 90 minutes
Self-Powered green
120/347VAC
Less than 3W
Ni-Cd Battery
Min. 60 minutes
ORDERING INFORMATION
SERIES
LER= EXIT
FACEPLATES
850U= single face,
universal mount
860U= double face,
universal mount
EXAMPLE: LER850WH
26
www.lumacell.com
HOUSING
FACEPLATES COLOURS
VOLTAGE
OPTIONS
WH= factory white
B= black
BA= brushed aluminum
CH= all chrome
PB= all polished brass
BZ= bronze
BBA= black/brushed aluminum
WBA= white/brushed aluminum
Blank= 120VAC to 347VAC,
6VDC to 48VDC
SPD= 120VAC to 347VAC, Self-Powered
c/w auto diagnostics
NEX= NEXUS® system interface*
TP= tamper proof screws
VRTP= polycarbonate shield with tamper-proof screws*
GN= green legend
990.0119-L= tamper proof bit**
Other colours available.
Consult your sales representative.
*Consult your sales representative for options
available with NEXUS® System.
*Indicate single or double face.
**One bit needed per order.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project