Current Cost NetSmart Energy Monitor Instructions

Below you will find brief information for Energy Monitor NetSmart. The NetSmart allows you to send your real time data of energy usage to the Current Cost online dashboard by connecting your monitor to your modem or broadband connection. With this device you no longer have to have your current Cost display connected to your PC or laptop to send real time data information. This device also features a 4P4C serial port to connect to a Current Cost monitor, a RJ45 Ethernet port, and a Link/Act LED to indicate network activity.

PDF Download

Document

Current Cost NetSmart
Thank you for purchasing a Current Cost NetSmart. This device allows you to send your real time data of energy
usage to the Current Cost online dashboard by connecting your monitor to your modem or broadband connection.
With this device you no longer have to have your current Cost display connected to your PC or laptop to send real
time data information.
How it works
Installation Instructions – It is very important you follow these instructions in this order
1) Disconnect the power supply from your monitor. The monitor will be powered by the NetSmarts’ power adaptor.
DO NOT power the NetSmart with the monitors’ power adaptor. Please retain your monitors’ power adaptor
for future use without the NetSmart device. If you do decide to dispose of your monitors’ power adaptor, please
do so in an environmentally friendly manner.
2) Connect the short cable from the NetSmart to the Current Cost monitor.
3) Connect the network cable from the NetSmart to your network or broadband router.
4) Connect the power supply to the NetSmart.
5) Go to the following web address and register: http://my.currentcost.com
6) Once registered, login to your account.
7) Enter the NetSmart serial number found on the reverse of the device and click Activate.
8) All done! Your energy usage is posted every 5 minutes
Technical Information
Model: NetSmart
Product Size: 65mm x 65mm x 28mm
Operating voltage: 5v
Compatible with: ENVI, EnviR &amp; Classic monitors
Power Adapter: 5VDC, 500mA, 2.1mm center positive.
4P4C Serial Port: Connects the NetSmart to a Current Cost monitor
RJ45 Ethernet Port: The RJ45 Ethernet port has two LEDs: Link/Act and 10/100.
The Link/Act LED should be on when connected. If the Link/Act LED is not ON, this usually means
there is a bad network connection or bad cable.
LED Link Activity (LINK/ACT): GREEN = link active BLINK = network activity OFF = link inactive
LED 10/100: Baud Rate / Network Speed AMBER = 100Mb OFF = 10Mb
For more details or support, please visit http://my.currentcost.com
CC Bridge data sheet.indd 1
14/07/2011 18:21
">

Hello! I am an AI chatbot specifically trained to assist you with the Current Cost NetSmart Energy Monitor Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Hide related prompts

Assistant typing

Assistant terminated