advertisement
MODEL
LC-26GA5X
LCD COLOUR TELEVISION
OPERATION MANUAL
MODEL
LC-26GA5X
LCD COLOUR TELEVISION
OPERATION MANUAL
Contents
Contents …………………………………………………… 1
Trademarks ………………………………………………… 2
Dear SHARP customer …………………………………… 3
Important Safety Precautions ………………………… 3
Supplied accessories …………………………………… 5
Preparation ………………………………………………… 6
Inserting the batteries ………………………………… 6
Using the remote control unit ………………………… 6
Cautions regarding remote control unit ……… 6
Setting the TV ………………………………………… 7
Basic connection ……………………………………… 8
Connecting to an antenna ……………………… 8
Connecting to the power outlet ………………… 8
Setting the TV on the wall …………………………… 9
Removing the stand …………………………………… 9
Part names ………………………………………………… 10
TV (Front) ……………………………………………… 10
TV (Rear) ……………………………………………… 11
Remote control unit …………………………………… 12
Watching TV ……………………………………………… 13
Turning on the power ………………………………… 13
Turning off the power ………………………………… 13
Simple button operations for changing channels … 14
Using Flashback (A) on the remote control unit … 14
Using MPX on the remote control unit ……………… 15
Simple button operation for changing volume/sound …………………………………… 16
Basic adjustment settings ……………………………… 17
Menu operation buttons ……………………………… 17
On-Screen Display …………………………………… 17
TV/AV input mode menu items ……………………… 18
Auto installation ……………………………………… 19
Programme setup ……………………………………… 19
Auto search ……………………………………… 19
Manual setting for each channel ……………… 20
Search tuning ………………………………… 20
Fine tuning …………………………………… 20
Colour system ……………………………… 21
Sound system (Broadcasting system) …… 21
Labelling channels ………………………… 21
Skipping channels ………………………… 22
Setting the child lock ……………………… 22
Password setting for child lock (for TV input mode) See page 40.
Setting the booster ………………………… 22
Sort ………………………………………………… 23
Erase Programme ………………………………… 23
Language setting for on-screen display …………… 24
OPC (Optical Picture Control) setting ……………… 24
Picture adjustments …………………………………… 25
C.M.S. (Colour Management System) ………… 26
Colour temperature ……………………………… 26
Black ……………………………………………… 26
3D-Y/C …………………………………………… 27
Monochrome ……………………………………… 27
Film mode ………………………………………… 27
I/P setting ………………………………………… 27
Audio adjustment ……………………………………… 28
Dolby Virtual ……………………………………… 28
Power control ………………………………………… 29
1
LC-26GA5X(E)-a 1 04.12.17, 8:19 AM
Contents
Using external equipment ……………………………… 30
Displaying an external equipment image ………… 30
Displaying a DVD image (Example) ………………… 30
Connecting a DVD player …………………………… 31
Connecting a VCR …………………………………… 31
Connecting a game console or camcorder ………… 32
Connecting an HDTV tuner ………………………… 32
Useful adjustment settings ……………………………… 33
Image position ………………………………………… 33
Audio Only ……………………………………………… 33
Input Select …………………………………………… 33
Input Label …………………………………………… 34
Colour system setting ………………………………… 34
AV mode selection …………………………………… 35
Wide screen signalling (WSS) ……………………… 35
Picture aspect ratio …………………………………… 35
WIDE mode …………………………………………… 36
DNR (Digital Noise Reduction) ……………………… 37
Quick Shoot …………………………………………… 37
Rotate …………………………………………………… 38
Audio Out ……………………………………………… 39
Sleep timer …………………………………………… 39
Password setting for child lock
(for TV input mode) ……………………………… 40
Useful features …………………………………………… 41
Dual screen functions ………………………………… 41
Teletext language setting …………………………… 42
Teletext function ……………………………………… 43
Appendix ………………………………………………… 45
Troubleshooting ……………………………………… 45
RS-232C port specifications ………………………… 46
Specifications ………………………………………… 48
Optional accessory …………………………………… 48
Dimensional drawings …………………………………… 49
Memo ……………………………………………………… 51
Trademarks
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
2
LC-26GA5X(E)-a 2 04.12.17, 8:19 AM
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD colour TV product, please read the following precautions carefully before using the product.
1.
Read instructions—All operating instructions must be read and understood before the product is operated.
2.
Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future reference.
3.
Observe warnings—All warnings on the product and in the instructions must be observed closely.
4.
Follow instructions—All operating instructions must be followed.
5.
Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.
6.
Power source—This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
7.
AC cord protection—The AC cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.
8.
Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
9.
Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
10. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing.
11. Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs.
a. When the AC cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing.
12. Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
13. Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.
3
LC-26GA5X(E)-a 3 04.12.17, 8:19 AM
4
LC-26GA5X(E)-a
Important Safety Precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
4
• The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
The LCD panel is a very high technology product with 3,147,264 thin film transistors, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two hands—one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
04.12.17, 8:19 AM
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit “AAA” size battery (g2) AC cord
Page 12
Cable clamp (g2)
Page 6
Antenna cable
Page 7
Operation manual
Page 7
NOTE
• Always use the AC cord supplied with the TV.
Page 8
LC-26GA5X(E)-a 5 04.12.17, 8:20 AM
5
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1
Open the battery cover.
2
Insert two supplied “AAA” size batteries.
3
Close the battery cover.
• Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the remote sensor window.
Objects between the remote control unit and sensor window may prevent proper operation.
6
LC-26GA5X(E)-a
30 °
7 m
30
°
Remote control sensor
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, or place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor window of the TV is under direct sunlight or strong lighting. In such case, change the angle of the lighting or TV, or operate the remote control unit closer to the remote sensor window.
6 04.12.17, 8:20 AM
Preparation
Setting the TV
Notes on setting location
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
1
Removing the terminal cover
TV (rear view)
Press down the hooks to remove the cover toward you.
2
Connecting the AC cord, antenna, and external equipment to the TV
AC cord
See pages 8, 31 and 32 for connecting antennas and external equipment, such as VCR and DVD player.
3
Bundling the cables and closing the terminal cover
Cable clamp
Insert the cable clamps in the holes on the TV as shown.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
CAUTION
Adjust the screen with both hands. Put one hand on the TV and tilt the screen while steadying the stand with your other hand.
To change the vertical angle of the TV, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV can also be rotated up to 25 degrees to the right or left.
7
LC-26GA5X(E)-a 7 04.12.17, 8:20 AM
Preparation
Simple operations for watching a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
Room antenna terminal
(75-ohm type)
To antenna terminal
Connecting to the power outlet
Rear view
NOTE
• Always turn off the power of the TV when connecting the AC cord.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
8
LC-26GA5X(E)-a 8 04.12.17, 8:20 AM
Preparation
Setting the TV on the wall
• You can mount the TV on the wall, using the optional AN-26AG1 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
<Example>
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Regarding the angle when mounting the TV on the wall
• The angle to which you can tilt the wallmounted TV is up to 20 degrees. Do not tilt it more than the maximum angle.
• Tilt the wall-mounted TV slowly when adjusting its angle.
Removing the stand
For wall mounting with the optional AN-26AG1 bracket, remove the stand.
Before attaching/detaching stand
• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1 2
Unfasten the four screws used to secure the stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the base area.)
NOTE
• To attach the stand, perform the above steps in reverse order.
LC-26GA5X(E)-a 9 04.12.17, 8:20 AM
9
Part names
TV (Front)
Channel up (r)/down (s) buttons
Volume up (+)/down (–) buttons
TV/VIDEO button
POWER (On/Off) button
10
LC-26GA5X(E)-a
Remote control sensor
OPC sensor
POWER indicator
10
Headphone jack
OPC indicator*
SLEEP timer indicator
*OPC: Optical Picture Control
(See page 24.)
04.12.17, 8:20 AM
Part names
TV (Rear)
AC INPUT terminal
AV OUTPUT terminals
INPUT 2 terminals
INPUT 1 terminals
INPUT 3 terminals
SYSTEM RESET**
RESET*
RS-232C terminal
Antenna input terminal
* Press RESET if the TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
• AV MODE resets to USER.
• Image position is initialised.
• TV channel resets to channel 1.
• Still image mode deactivates.
• Dual screen resets to normal.
• Teletext mode resets to normal.
• Audio setting initialises.
• Audio Out setting resets to Fixed.
• Dolby Virtual resets to Off.
• Audio Only setting resets to Off.
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 40 for resetting the password. See page 50 for initialising to the factory preset values in case you forget your password.
11
LC-26GA5X(E)-a 11 04.12.17, 8:20 AM
Part names
Remote control unit
3
4
5
6
7
8
9
10
11
12
13
14
15
1 2
16
17
18
19
20
21
22
23
24
25
26
27
28
NOTE
• When using the remote control unit, point it at the TV.
10
11
12
13
14
15
16
17
18
4
5
6
7
8
9
19
20
21
1
2
3
22
23
24
25
26
27
28
POWER (STANDBY/ON)
To switch the power on and off. (See page 13.)
OPC
To switch the Optical Picture Control on and off. (See page 24.)
P&P
Set the dual picture mode. Press P&P again to return to normal view.
(See page 41.)
SELECT
To select either screen to be active in Dual screen mode.
WIDE
Change the wide image mode. (See page 36.)
TELETEXT mode: Set the area of magnification. (full/upper half/lower half) (See page 43.)
ROTATE
Rotates the display in every direction. (See page 38.)
FREEZE
Change the still image mode. (See page 41.)
TELETEXT mode: Freeze a multi-page on screen while other pages are automatically updated. Press FREEZE again to return to the normal image. (See page 43.)
Virtual
Select Virtual Dolby Surround settings. (See page 28.)
0 – 9
Set the channel. (See page 14.)
TELETEXT mode: Set the page. (See page 43.)
A (Flashback)
Press to return to the previous image in normal viewing mode. (See page 14.)
[ (SUBTITLE for TELETEXT)
To turn the subtitles on and off. (See page 44.) k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 43.)
MPX
Select the sound multiplex mode. (See page 15.)
VOLl/VOLk
Set the volume. (See page 16.) e (MUTE)
Mute the sound. (See page 16.)
EXIT
Turn off the On Screen Display.
SLEEP
Set the Sleep timer. (See page 39.)
DISPLAY
Display the programme information.
AV MODE
Select a video setting: AV MODE (STANDARD, MOVIE, GAME, USER,
DYNAMIC) (See page 35.)
3D–Y/C
To switch the 3D–Y/C function on and off. (See page 27.) o (Digit for channel select)
Change the digits of the selected TV channel. (See page 14.) m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT image) (See pages 43 and 44.) l (TOP Overview for TELETEXT)
TELETEXT mode: Display an index page for CEEFAX/FLOF information. TOP Overview for TOP programme. (See page 44.)
CHr/CHs
TV input mode: Select the channel. (See page 14.)
TELETEXT mode: Select the page. (See page 43.)
TV/VIDEO (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3) (See pages
30, 33, 34 and 41.)
MENU
Display the menu screen. (See page 17.) a/b/c/d (Cursor)
Select a desired item on the setting screen. (See page 17.)
ENTER
Execute a command.
RETURN
MENU mode: Return to the previous menu screen. (See page 17.)
Colour (RED/GREEN/YELLOW/BLUE)
TELETEXT mode: Select a page. (See page 43.)
12
LC-26GA5X(E)-a 12 04.12.17, 8:20 AM
Watching TV
POWER indicator
POWER button
Turning on the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control.
POWER button
POWER indicator
Off Power off
Red The TV is in standby mode.
Green The TV is on.
Turning off the power
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen disappears.
• The POWER indicator on the TV changes from green to red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER, you cannot turn on the power by pressing POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when POWER is turned off.
LC-26GA5X(E)-b 13 04.12.17, 8:21 AM
13
Watching TV
Simple button operations for changing channels
You can change channels in several ways.
Using CHr/son the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
Channel display
Channel display changes approximately after 3 seconds as shown below.
SAT.1
12
PAL
B/G
(Example)
SAT.1
12
MONO
NOTE
• CHs/r on the TV operates the same as CHs/ron the remote control unit.
Using Flashback (A) on the remote control unit
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 2. If “2” is indicated and the picture does not change immediately, press o to switch over to the
1-digit select mode and press 2 again.
To select a 2-digit channel (e.g. channel 12):
• Press o to set the 2-digit select mode. Press 1, followed by 2.
NOTE
• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-digit channel mode.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
Press A to switch the currently tuned channel to the previously tuned channel.
Press A again to switch back to the currently tuned channel.
Press A to toggle between the currently selected input source and the previously selected one.
Press A to return to the previous page in TELETEXT mode.
14
LC-26GA5X(E)-b 14 04.12.17, 8:21 AM
Watching TV
Using MPX on the remote control unit
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
STEREO and MONO.
Stereo mode
BBC2
99
STEREO
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
NICAM STEREO and MONO.
Stereo mode
BBC2
99
NICAM
STEREO
BBC2
99
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
BBC2
99
CH A
BBC2
99
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
Bilingual mode
BBC2
99
NICAM
CH A
BBC2
99
NICAM
CH B
BBC2
99
NICAM
CH AB
BBC2
99
CH B
BBC2
99
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
BBC2
99
MONO
NOTE
• When no signal is input, the sound mode will display
“MONO”.
• “BBC2” and “99” are tentative network name and channel.
BBC2
99
MONO
When receiving a monaural signal
Each time you press MPX, the mode switches between
NICAM MONO and MONO.
Monaural mode
BBC2
99
NICAM
MONO
BBC2
99
MONO
15
LC-26GA5X(E)-b 15 04.12.17, 8:21 AM
Watching TV
Simple button operation for changing volume/sound
Changing the volume
You can change the volume on the TV or on the remote control unit.
Using e (Mute) on the remote control unit
e mutes the current sound output.
• To increase the volume, press VOL k
• To decrease the volume, press VOL l
1
Press e.
• The sound is silenced.
• “M” has been displayed on the screen for 30 minutes.
Mute
20
NOTE
• “TV”, “INPUT1”, “INPUT2” and “INPUT3” modes can store volume adjustment values separately.
When “Audio Out” is set to “Variable”, the indicator on the screen changes as shown below.
20
NOTE
• Within 30 minutes after pressing e, press one of the buttons below to cancel the mute.
—VOLf
—e
• Mute will be cancelled after 30 minutes. However, the
TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume
level by pressing VOLk.
2
Press e again within 30 minutes to cancel the mute.
• Before 30 minutes, the volume level returns to the previous setting.
Audio status
Output device
Speaker
AV OUTPUT
Fixed
Audio out
Variable
Variable sound Mute
Constant as specified
Variable sound
NOTE
• See page 39 for details on the audio out function.
16
LC-26GA5X(E)-b 16 04.12.17, 8:21 AM
Basic adjustment settings
Menu operation buttons
Use the following buttons on the remote control to operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen or adjust a selected item.
ENTER: Press to go to the next step or complete the setting.
RETURN: Press to return to the previous step.
On-Screen Display
Example
MENU [Option ... Quick Shoot]
Option
Audio Only
DNR
Input Select
Audio Out
Quick Shoot
Colour System
[Off]
[VIDEO]
[On]
[AUTO]
1
2
3
4
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates an item can be selected.
4 Item displayed in grey
• This indicates that the item cannot be selected.
*There are various reasons why items cannot be selected, but the main reasons are as follows:
1. Nothing is connected to the selected input terminal.
2. The function is not compatible with the current input signal.
NOTE
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
04.12.17, 8:22 AM
17
LC-26GA5X(E)-c 17
Basic adjustment settings
TV/AV input mode menu items
List of TV/AV menu items to help you with operations
Picture
OPC ................................................ Page 24
Backlight ........................................ Page 25
Contrast ......................................... Page 25
Brightness ..................................... Page 25
Colour ............................................ Page 25
Tint ................................................. Page 25
Sharpness ...................................... Page 25
Advanced
C.M.S. ................................... Page 26
Colour Temp. ....................... Page 26
Black .................................... Page 26
3D-Y/C .................................. Page 27
Monochrome ....................... Page 27
Film Mode ............................ Page 27
I/P Setting ............................ Page 27
Audio
Treble .............................................. Page 28
Bass ............................................... Page 28
Balance .......................................... Page 28
Dolby Virtual .................................. Page 28
Power Control
No Signal Off ................................. Page 29
No Operation Off ........................... Page 29
Setup
Auto Installation ............................ Page 19
Programme Setup .................. Pages 19-23
Child Lock ...................................... Page 40
Input Label ..................................... Page 34
Position .......................................... Page 33
WSS ................................................ Page 35
4:3 Mode ........................................ Page 35
Rotate ............................................. Page 38
Language ....................................... Page 24
Text Language ............................... Page 42
Option
Audio Only ..................................... Page 33
DNR ................................................ Page 37
Input Select .................................... Page 33
Audio Out ....................................... Page 39
Quick Shoot ................................... Page 37
Colour System ............................... Page 34
18
LC-26GA5X(E)-c 18 04.12.17, 8:22 AM
Basic adjustment settings
Auto installation
You can run auto installation again, even after setting up the preset channels.
1
Press MENU and the MENU screen displays.
Programme setup
You can run the auto installation procedure again at any time by accessing the Setup menu and
Programme Setup. Channels can be tuned automatically or manually.
Auto search
You can also automatically search and download TV channels by performing the procedure below. This is the same function as programme auto search in auto installation.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
2 Press c/d to select “Setup”.
3
Press a/b to select “Auto Installation”, and then press ENTER.
MENU [Setup ... Auto Installation]
Setup Option
Auto Installation
Programme Setup
Child Lock
Position
WSS
4:3 Mode
Rotate
Language
Text Language
[On]
[Panorama]
[Normal]
[English]
[West Europe]
3
Press a/b to select “Programme Setup”, and then press ENTER.
If you have already set the password, enter it here.
• See page 40 for setting password.
MENU [Setup ... Programme Setup]
Setup Option
Auto Installation
Programme Setup
Child Lock
Position
WSS
4:3 Mode
Rotate
Language
Text Language
[On]
[Panorama]
[Normal]
[English]
[West Europe]
4
If you already set the password, enter it here.
• See page 40 for setting password.
– – – –
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press a/b to select the desired language listed on the screen, and then press ENTER.
After this setting, auto search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
You do not need to do anything during the auto search.
NOTE
• After performing step 6, the menu screen shown in step 3 will reappear. Do not turn off the TV before then, because the TV is saving the data found.
4 Press a/b to select “Auto Search”, and then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
• Auto search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
NOTE
• After performing step 5, the menu screen shown in step 3 will reappear. Do not turn off the TV before then, because the TV is saving the data found.
19
LC-26GA5X(E)-c 19 04.12.17, 8:23 AM
Basic adjustment settings
Manual setting for each channel
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour sys., Sound sys.,
Label (Network name), Skip, Lock (Child Lock) and
Booster.
1
Press MENU and the MENU screen displays.
2 Press c/d to select “Setup”.
Search tuning
1
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Search”, and then press ENTER.
MENU [Setup ... Programme Setup ... Manual Adjust]
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
179.25
NEXT
STORE
CANCEL
MHz
3
Press a/b to select “Programme Setup”, and then press ENTER.
If you have already set the password, enter it here.
• See page 40 for setting password.
4
Press a/b to select “Manual Adjust”, and then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
Programme Setup “Manual Adjust” menu
3
Press a/b to select item and press ENTER.
• NEXT: Search the next channel.
• STORE: Memorise the current display channel.
• CANCEL: Returns to the previous screen. (The search result will not be stored.)
01 SAT.1
02 PR07 03 KABEL
Next
Fine tuning
1
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Fine”, and then press
ENTER.
3
Press c/d to adjust the frequency, and then press ENTER.
• Adjust while checking the background picture as a reference.
You can select one of the following settings.
1 Search (See page 20.)
2 Fine (See page 20.)
3 Colour system (See page 21.)
4 Sound system (See page 21.)
5 Label (See page 21.)
6 Skip (See page 22.)
7 Lock (See page 22.)
8
Booster (See page 22.)
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
179.25
MHz
• Instead of the method above, you can also set by directly entering the frequency number of the channel with 0 – 9.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
20
LC-26GA5X(E)-c 20 04.12.17, 8:23 AM
Basic adjustment settings
Manual setting for each channel (continued)
Colour system
1
2
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Colour sys.”, and then press ENTER.
• Receivable colour systems are listed.
Colour system menu
MENU [Setup ... Programme Setup ... Manual Adjust]
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
Labelling channels
When a TV channel sends its Network Name, the auto installation detects the information and assigns a name to it. However, you can change individual channel names.
1
2
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Label”, and then press
ENTER.
• Alphabets and numbers are listed.
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
Labelling menu
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
A B C D E F G H I
K L M N O P Q R S
U V W X Y Z + – .
J CLEAR
T BACK
_
0 1 2 3 4 5 6 7 8 9 END
3
Press a/b to select the optimum colour system, and then press ENTER.
3
Press a/b/c/d to select each character of the new name for the channel, and then press ENTER.
Sound system (Broadcasting system)
4
1
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information displays.
Repeat until the name is fully spelt out.
• The name can be 5 characters or less.
• When you want to set a channel name of less than 5 characters, select “END”, then press
ENTER to exit from the labelling menu.
2
Press a/b to select “Sound sys.”, and then press ENTER.
• Receivable sound systems (Broadcasting systems) are listed.
Sound system menu
Search
Fine
Colour sys.
Sound sys.
[179.25]
[AUTO]
[B/G]
B/G
D/K
I
M
Label
Skip
Lock
Booster
[SAT.1]
[Off]
[Off]
[Off]
3
Press a/b to select the optimum sound system, and then press ENTER.
NOTE
• Check the colour system (see above) if the sound output is not correct.
21
LC-26GA5X(E)-c 21 04.12.17, 8:23 AM
22
LC-26GA5X(E)-c
Basic adjustment settings
Manual setting for each channel (continued)
Skipping channels
Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.
1
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information will be displayed.
2
Press a/b to select “Skip”, and then press
ENTER.
• Skip menu displays.
Skip menu
MENU [Setup ... Programme Setup ... Manual Adjust]
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
Off
On
3
Press a/b to set “Skip” to “On”, and then press ENTER.
Setting the child lock
You can block the viewing of any channel.
1 Press a/b/c/d to select the channel you want to edit, and then press ENTER.
• The selected channel information will be displayed.
2
Press a/b to select “Lock”, and then press
ENTER.
• Child lock menu will be displayed.
Lock menu
Search
Fine [179.25]
Off
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
On
3 Press a/b to set “Lock” to “On”, and then press ENTER.
NOTE
• See page 40 for setting password.
• If “Lock” is set to “On” for a channel, “Child lock has been activated.” is displayed when you select the channel, and the image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been activated.” is displayed, password input menu will be displayed. Inputting the correct password lifts the child lock temporarily until the power is turned off.
Setting the booster
Picture quality may improve in regions with weak signal strength using this function.
1
2
Press a/b/c/d to select the channel you want to edit, and then press ENTER.
Press a/b to select “Booster”, and then press ENTER.
• Booster menu displays.
Booster Menu
Search
Fine
Colour sys.
Sound sys.
Label
Skip
Lock
Booster
[179.25]
[AUTO]
[B/G]
[SAT.1]
[Off]
[Off]
[Off]
Off
On
3
Press a/b to set “Booster” to “On”, and then press ENTER.
NOTE
• If signal strength is strong enough for the selected channel, the effect is negligible and may produce instability. In such case, select “Off”.
22 04.12.17, 8:23 AM
Basic adjustment settings
Sort
Channel positions can be sorted freely.
1
Press MENU and the MENU screen displays.
Erase Programme
The individual programme can be erased.
1
Repeat steps 1 to 3 in Sort.
5
6
7
8
2
3
4
Press c/d to select “Setup”.
Press a/b to select “Programme Setup”, and then press ENTER.
If you already set the password, enter it here.
• See page 40 for setting password.
Press a/b to select “Sort”, and then press
ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select the channel you want to move, and then press ENTER.
Move it to the desired position by pressing a/b/c/d, and then press ENTER.
Repeat the steps 6 and 7 until all desired channels are sorted.
Sort menus
01 SAT.1
01 SAT.1
06
02 KABEL 03 04 05
2
3
4
5
6
Press a/b to select “Erase Programme”, and then press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select the channel you want to erase, and then press ENTER.
• A message screen pops up.
Press c/d to select “Yes”, and then press ENTER to erase the selected programme. All the subsequent programmes move up.
Repeat the steps 4 and 5 until all desired channels are erased.
Erase programme menus
01 SAT.1
01 SAT.1
06
11
16
02 Pro7
07
12
17
03 KABEL 04
08
13
18
09
14
19
Next
05
10
15
20
Next
01 SAT.1
02 KABEL
01 SAT.1
02 KABEL
02 Pro7
11
16
01 SAT.1
06
12
17
02 Pro7
07
13
18
03 KABEL
08
04
09
14
19
Next
05
10
15
20
01 KABEL
01 KABEL 02 SAT.1
Next
02 KABEL
01 SAT.1
06
11
16
02 KABEL 03
07
12
17
08
13
18
Next
04
09
14
19
05
10
15
20
Next
23
LC-26GA5X(E)-c 23 04.12.17, 8:23 AM
Basic adjustment settings
Language setting for on-screen display
You can also select a language from setup menu.
Select from among 3 languages: English, Chinese and
Arabic.
OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.
Using OPC on the remote control unit
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
4
Press a/b to select “Language”, and then press ENTER.
Press a/b to select the desired language listed on the screen, and then press ENTER.
Press OPC to switch the OPC function on and off.
Selected item
Off
On
Description
The brightness is fixed at the value set in
“Backlight“ (See page 25).
Automatically adjusts
Using OPC on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
3
Press a/b to select “OPC”.
4
Press c/d to select “On”.
NOTE
• Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.
24
LC-26GA5X(E)-d 24 04.12.17, 8:27 AM
Basic adjustment settings
Picture adjustments
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
3
Press a/b to select a specific adjustment item.
4
Press c/d to adjust the item to your desired position.
NOTE
• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.
Adjustments items
MENU [Picture]
Picture Audio
USER [TV]
OPC Off
Backlight [+8] –8
Contrast
Brightness
[+30]
[0]
0
–30
Colour [0] –30
Tint
Sharpness
Advanced
Reset
[0]
[0]
–30
–10
On
+8
+40
+30
+30
+30
+10
Selected item
Backlight
Contrast cbutton
The screen dims
For less contrast d button
The screen brightens
For more contrast
Brightness
Colour
Tint
Sharpness
For less brightness For more brightness
For less colour intensity
Skin tones become purplish
For more colour intensity
Skin tones become greenish
For less sharpness For more sharpness
NOTE
• Select “Advanced” and then press ENTER to set “C.M.S-
Hue”, “C.M.S-Saturation”, “C.M.S-Value”, “Colour Temp.”,
“Black”, “3D-Y/C”, “Monochrome”, “Film Mode” or “I/P
Setting”. See pages 26 and 27.
LC-26GA5X(E)-d 25 04.12.17, 8:27 AM
25
Basic adjustment settings
C.M.S. (Colour Management System)
Colour tone is managed using the six-colour adjustment setting.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
Press a/b to select “Advanced”, and then press ENTER.
4
Press a/b to select “C.M.S.-Hue”, and then press ENTER.
5
Press a/b to select a specific adjustment item.
C. M. S-Hue
C. M. S-Saturation
C. M. S-Value
Changing reds closer to magenta or yellow.
R
Y
G
[ 0]
[ 0]
[ 0]
–30
–30
–30
C
B
[ 0]
[ 0]
–30
–30
M
Reset
[ 0] –30
+30
+30
+30
+30
+30
+30
Colour temperature
Adjusts the colour temperature to give the best white image.
1
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
2
Press a/b to select “Colour Temp.”, and then press ENTER.
3
Press a/b to select the desired level, and then press ENTER.
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with bluish tone
White with reddish tone
Black
For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image.
1
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
2
Press a/b to select “Black”, and then press
ENTER.
• You can select “C.M.S-Saturation” or “C.M.S-
Value” here instead of selecting “C.M.S-Hue”.
6
Press c/d to adjust the item to your desired position.
NOTE
• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press
ENTER.
Selected item
C.M.S-Hue
C.M.S-
Saturation
C.M.S-Value
Description
This is a standard to adjust the colour either more reddish or more bluish in tone.
Increases or decreases the saturation of a selected colour
A higher value makes the image brighter.
A lower value makes the image darker.
3
Press c/d to select “On”, and then press
ENTER.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp.
Black
3D – Y/C
Monochrome
Film Mode
I/P Setting
On Off
Selected item
Off
On
Description
No adjustment
For high detail in black portions
26
LC-26GA5X(E)-d 26 04.12.17, 8:27 AM
Basic adjustment settings
3D-Y/C
Provides high quality images with minimal dot crawl and cross colour noise.
Using 3D-Y/C on the remote control unit
Monochrome
For viewing a video in monochrome.
1
Repeat steps 1 to 3 in 3D-Y/C.
2
Press a/b to select “Monochrome”, and then press ENTER.
Press 3D-Y/C to switch the 3D-Y/C function on and off.
Using 3D-Y/C on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
3
Press c/d to select “On”, and then press
ENTER.
Film mode
Automatically detects a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality.
1
Repeat steps 1 to 3 in 3D-Y/C.
3
Press a/b to select “Advanced”, and then press ENTER.
2
Press a/b to select “Film Mode”, and then press ENTER.
4
Press a/b to select “3D-Y/C”, and then press ENTER.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp.
Black
3D – Y/C
Monochrome
Film Mode
I/P Setting
Standard
Fast
Slow
3
Press c/d to select “On”, and then press
ENTER.
I/P setting
Adjusting the image and input signal can give you a more beautiful picture.
1
Repeat steps 1 to 3 in 3D-Y/C.
5
Press a/b to select the desired level, and then press ENTER.
Selected item
Standard
Fast
Slow
Description
Normal adjustment
For movie image
For still image
NOTE
• “3D-Y/C” is not selectable depending on the input signal type.
• “3D-Y/C” is set to “On” when the TV is turned back on.
• 3D-Y/C may not operate depending on the input signal type or noisy input signal.
2
Press a/b to select “I/P Setting”, and then press ENTER.
3
Press c/d to select “Interlace” or
“Progressive”, and then press ENTER.
NOTE
• The picture is progressive scan when Film Mode is “On”.
27
LC-26GA5X(E)-d 27 04.12.17, 8:27 AM
28
LC-26GA5X(E)-e
Basic adjustment settings
Audio adjustment
You can adjust the sound quality to your preference with the following settings.
1
Press MENU and the MENU screen displays.
Dolby Virtual
When you set Dolby Virtual to On, you can enjoy virtual surround sound, the same as if you were in a movie theatre.
Using Virtual on the remote control unit
2
Press c/d to select “Audio”.
MENU [Audio]
Audio Power Control
USER [TV]
Treble [0] –15
Bass
Balance
Dolby Virtual
Reset
[0]
[0]
–15
L
+15
+15
R
[Off]
3
Press a/b to select a specific adjustment item.
4
Press c/d to adjust the item to your desired position.
Selected item cbutton d button
Treble For weaker treble For stronger treble
Press Virtual to switch the Dolby Virtual function on and off.
• On: Makes it possible to enjoy natural, realistic surround sound.
• Off: Outputs the normal sound.
Using Dolby Virtual on the menu screen
You can produce Dolby Virtual effects from the “Audio” setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Audio”.
Bass
Balance
For weaker bass For stronger bass
Decrease audio from the right speaker
Decrease audio from the left speaker
NOTE
• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.
• Audio menu items are greyed out when Audio output is variable or when headphones are in use.
• Balance is greyed out when Dolby Virtual is set to “On”.
3
Press a/b to select “Dolby Virtual”, and then press ENTER.
MENU [Audio ... Dolby Virtual]
Audio Power Control
USER [TV]
Treble [0] –15
Bass
Balance
Dolby Virtual
Reset
[0]
[0]
–15
L
+15
+15
R
[Off]
4
Press c/d to select “On”, and then press
ENTER.
NOTE
• Audio menu items are greyed out when Audio output is variable or when headphones are in use.
• Balance is greyed out when Dolby Virtual is set to “On”.
• For some discs, setup may be required on your DVD. In this case, refer to the operation manual of your DVD player.
• You may not get the Dolby Virtual Surround effect if you adjust “Treble” or “Bass” setting.
28 04.12.17, 8:28 AM
Basic adjustment settings
Power control
Power control setting allows you to save energy.
No Signal off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power control”.
• Power control menu displays.
3
Press a/b to select “No Signal Off”, and then press ENTER.
4
Press c/d to select “Enable”, and then press ENTER
• Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, this function may not operate.
No Operation off
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power control”.
• Power control menu displays.
3
Press a/b to select “No Operation Off”, and then press ENTER.
4
Press c/d to select “Enable”, and then press ENTER.
• Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
LC-26GA5X(E)-e 29 04.12.17, 8:28 AM
29
Using external equipment
You can connect many types of external equipment to your TV, like a VCR, DVD player, HDTV tuner, game console and camcorder. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
Displaying a DVD image (Example) Displaying an external equipment image
Explanation here is for the setting when connecting
DVD to INPUT1 terminal.
1
To watch a DVD image, select “INPUT1” from
“INPUT SOURCE” menu using TV/VIDEO on the remote control unit or TV/VIDEO on the
TV.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, DVD player, HDTV tuner, game console, camcorder or other external equipment.
NOTE
• See pages 31 and 32 for external equipment connection.
• Please refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
• Each time TV/VIDEO is pressed, the input source toggles.
• If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.
• Refer to your external equipment operation manual for the signal type.
2
Select the desired signal type on “Input
Select” in the “Option” menu. (See page 33.)
For INPUT1 signal
MENU [Option ... Input Select]
AUTO
COMPONENT
VIDEO
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
30
LC-26GA5X(E)-f 30 04.12.17, 8:29 AM
Using external equipment
Connecting a DVD player
You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
To watch an image from this input terminal, you need to select the input source (see page 30) and the input signal type (see page 33).
Component cable
(commercially available)
Audio cable
(commercially available)
When using component cable, select
“COMPONENT” for “Input select” in the menu.
DVD player
Connecting a VCR
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
To watch an image from this input terminal, you need to select the input source (see page 30) and the input signal type (see page 33).
S-video cable
(commercially available)
Composite cable
(commercially available)
VCR
LC-26GA5X(E)-f 31 04.12.17, 8:29 AM
31
Using external equipment
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the
INPUT 2 terminals.
NOTE
• The S-video terminal has priority over the video terminals.
• You can also connect the game console to INPUT 1 or 3 terminals to enjoy clearer picture.
To watch an image from this input terminal, you need to select the input source (see page 30) and the input signal type (see page 33).
S-video cable
(commercially available)
Composite cable
(commercially available)
Game console/Camcorder
Connecting an HDTV tuner
You can use the INPUT 3 terminal when connecting to an HDTV tuner and other audiovisual equipment.
To watch an image from this input terminal, you need to select the input source (see page 30) and the input signal type (see page 33).
32
LC-26GA5X(E)-f
Component cable
(commercially available)
Audio cable
(commercially available)
When using component cable, select
“COMPONENT” for “Input select” in the menu.
HDTV tuner
32 04.12.17, 8:29 AM
Useful adjustment settings
Image position
For adjusting a picture’s horizontal and vertical position.
1
Press MENU and the MENU screen displays.
Input Select
Selecting input source
Can use for selecting the input source.
2
Press c/d to select “Setup”.
3
Press a/b to select “Position”, and then
4 press ENTER.
Press a/b to select “H-Pos.” or “V-Pos.”.
H-Pos.
V-Pos.
Reset
[0]
[0]
–10
–20
+10
+20
1
Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
2
Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV to select the input source.
• An image from the selected source automatically displays.
• You can also select the input source by pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
5
Press c/d to adjust the item to your desired position.
NOTE
• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.
• Adjustments are stored separately according to input source.
Selected item Description
H-Pos.
V-Pos.
Audio Only
When listening to music from a music programme, you can set the display off and enjoy audio only.
1
Centres the image by moving it to the left or right.
Centres the image by moving it up or down.
Press MENU and the MENU screen displays.
2
3
4
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then press ENTER.
Press a/b/c/d to select a signal type you want to set, and then press ENTER.
Input type Selectable item
INPUT 1
INPUT 2
INPUT 3
AUTO, COMPONENT, VIDEO
AUTO, S-VIDEO, VIDEO
AUTO, COMPONENT, VIDEO
2
Press c/d to select “Option”.
3
Press a/b to select “Audio Only”, and then press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Selected item
On
Off
Description
Audio is output without screen image.
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the TV such as by changing the input source, the Audio
Only function is set to “Off”.
NOTE
• If no (colour) image displays, try to change the other signal type.
• Check the operation manual of the external equipment for the signal type.
33
LC-26GA5X(E)-g 33 04.12.17, 8:30 AM
Useful adjustment settings
Input Label
You can assign each input source a label you like.
Colour system setting
Yo u can change the colour system to one that is compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
1
Press TV/VIDEO to select the desired input source.
3
Press a/b to select “Colour System”, and then press ENTER.
2
Press MENU and the MENU screen displays.
3
Press c/d to select “Setup”.
4
Press a/b to select a compatible video signal system of your equipment, and then press ENTER.
4
Press a/b to select “Input Label”, and then press ENTER.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
5
Press a/b/c/d to select each character of the new name for the channel, and then press ENTER.
DVD
A
K
B
L
C
M
D
N
E
O
F
P
G
Q
H
R
I
S
U V W X Y Z + – .
0 1 2 3 4 5 6 7 8 9
J
T
_
CLEAR
BACK
END
(Example)
6 Repeat the above until the name is fully spelt out, and then press ENTER.
• The name can be 6 characters or less.
• When you want to set a channel name of less than 6 characters, select “END”, then press
ENTER to exit from the labelling menu.
INPUT SOURCE
TV
INPUT1
INPUT2
DVD
(Example)
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).
34
LC-26GA5X(E)-g 34 04.12.17, 8:31 AM
Useful adjustment settings
AV mode selection
AV mode gives you five viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.
Wide screen signalling (WSS)
WSS allows a television to switch automatically among the different screen formats.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
1
2
Press AV MODE.
• Present AV mode displays.
Press AV MODE again before the mode displayed on the screen disappears.
• The mode changes as shown below.
3
Press a/b to select “WSS”, and then press
ENTER.
4
Press c/d to select “On” or “Off”, and then press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled.
AV MODE: STANDARD AV MODE: MOVIE
Picture aspect ratio
The WSS signal has 4:3 auto-switching that allows you to select between Normal and Panorama.
1
Press MENU and the MENU screen displays.
AV MODE: DYNAMIC AV MODE: GAME
2
Press c/d to select “Setup”.
AV MODE: USER
Selected item
Description
STANDARD
MOVIE
GAME
USER
DYNAMIC
For a highly defined image in a normally bright room
For a movie
Lowers image brightness for easier viewing.
Allows the user to customise settings as desired. You can set the mode for each input source.
For a clear-cut image emphasising high contrast for sports viewing
3
Press a/b to select “4:3 Mode”, and then press ENTER.
4
Press c/d to select “Normal” or
“Panorama”, and then press ENTER.
WSS signal 4:3 screen
4:3 mode “Normal” 4:3 mode “Panorama”
NOTE
• You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
Selected item
Normal
Panorama
Description
Normal range keeping 4:3 or 16:9 aspect ratio
Wide image without side bars
35
LC-26GA5X(E)-g 35 04.12.17, 8:31 AM
Useful adjustment settings
WIDE mode
Manual Selection
1
Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for the type of video signal currently received.
WIDE MODE
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
4:3 Mode set to “Normal” 4:3 Mode set to “Panorama”
2
Press WIDE or a/b while the WIDE MODE menu displays on the screen.
• As you toggle down the options, each is immediately reflected on the TV. No need to press ENTER.
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu on page 35, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup menu to “On”. (See page 35.)
“4:3 Mode” menu
To set the type of the wide screen, select “Normal” or
“Panorama” in the 4:3 Mode menu. (See page 35.)
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is enabled.
Selected item
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
Description
For 4:3 “standard” pictures. A side bar appears on each side.
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.
In this mode the picture is progressively stretched toward each side of the screen.
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Normal Zoom 14:9 Panorama
36
LC-26GA5X(E)-h
Cinema 14:9 Cinema 16:9
36
Full
04.12.17, 9:53 AM
Useful adjustment settings
DNR (Digital Noise Reduction)
Produces a clearer video image.
1
Press MENU and the MENU screen displays.
Quick Shoot
Improves LCD response when viewing fast-moving images. The effect is greater at low room temperatures
(at or below 15˚C/59˚F).
2
Press c/d to select “Option”.
1
Press MENU and the MENU screen displays.
3
2
Press c/d to select “Option”.
4
Press a/b to select “DNR”, and then press
ENTER.
Press a/b to select the desired level, and then press ENTER.
3
4
Press a/b to select “Quick Shoot”, and then press ENTER.
Press c/d to select “On”, and then press
ENTER.
Off
High
Low
On Off
NOTE
• Quick Shoot may cause image noise. If this occurs, turn the function “Off”.
LC-26GA5X(E)-h 37 04.12.17, 9:53 AM
37
Useful adjustment settings
Rotate
You can set the image orientation to Mirror, Rotated or
Upside down image.
Using ROTATE on the remote control unit Using Rotate on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Rotate”, and then press
ENTER.
4
Press a/b to select the desired mode, and then press ENTER.
Each time you press ROTATE, the mode changes as shown below.
Normal Mirror
Rotate Upside down
[Normal]: normal image.
[Mirror]: mirror image.
Normal
Mirror
Upside Down
Rotate
ABC ABC
[Rotate]: rotated image.
ABC
[Upside Down]: upside down image.
ABC
38
LC-26GA5X(E)-h 38 04.12.17, 9:53 AM
Useful adjustment settings
Audio Out
Allows you to select what controls the audio output.
NOTE
• This setting is available only in TV input mode.
1
Press MENU and the MENU screen displays.
Sleep timer
Allows you to set a time when the TV automatically switches to standby.
2
Press c/d to select “Option”.
3
4
Press a/b to select “Audio Out”, and then press ENTER.
Press c/d to select “Fixed” or “Variable”, and then press ENTER.
1
Press SLEEP.
• Remaining time displays when sleep timer has been set.
Fixed Variable
Selected item
Fixed
Variable
Description
• Sound via speakers is adjusted with VOLl/ k on the remote control unit or the TV.
• Sound via the AV OUTPUT terminal is not adjustable and constantly outputs.
• Sound via the AV OUTPUT terminal is adjusted with VOLl/k on the remote control unit or the TV.
• Sound via speakers is muted.
Sleep Timer: Remain 2 hr. 00 min.
2
Each time you press SLEEP, the remaining time switches as shown below.
0 hr. 30 min.
1 hr. 00 min.
1 hr. 30 min.
Off 2 hr. 30 min.
2 hr. 00 min.
NOTE
• When the time has been set, countdown automatically starts.
• Five minutes before the preset of time expires, the remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
LC-26GA5X(E)-h 39 04.12.17, 9:53 AM
39
Useful adjustment settings
Password setting for child lock (for
TV input mode)
Allows you to use a password to protect certain settings from being accidentally changed.
7
Enter the same 4-digit number as in step 6 to confirm.
• “The new password is registered.” displays.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter a password. (See page 22.) When you select a locked channel, a password prompt message pops up. Press
ENTER to display the password input window.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
Resetting the password
Allows you to reset your password.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then press ENTER.
4
If you already set the password, enter it here.
– – – –
5
Press a/b to select “Change password”, and then press ENTER.
Change password
Reset
3
Press a/b to select “Child Lock”, and then press ENTER.
4
If you already set the password, enter it here.
– – – –
5
6
Press a/b to select “Reset”, and then press
ENTER.
Press c/d to select “Yes”, and then press
ENTER.
Change password
Reset
New Password
Reconfirm
– – – –
– – – –
Yes No
6
Enter the 4-digit number as a password using
0 – 9.
Change password
Reset
New Password
Reconfirm
– – – –
– – – –
NOTE
• As a precautionary measure, make a note of your password and keep it in a familiar place. If you lose or forget your password, initialise the TV to return all settings except for the TV channel settings to factory preset values. (See page 50.)
• This function is only available for TV input mode.
40
LC-26GA5X(E)-h 40 04.12.17, 9:53 AM
Useful features
Dual screen functions
Allows you to display two pictures on the screen at one time.
Dual screen
You can display two pictures.
Picture and still image
You can freeze a motion picture on the display.
1
Press P&P.
• Dual screen displays and a selected input source image displays.
z z
1
Press FREEZE.
• A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.
2
Press SELECT to set either screen to be active.
• “z” displays on the active screen, which has sound output.
3
Press TV/VIDEO to select another input source on the active screen.
• A selected image displays.
4
Press P&P to exit dual screen.
NOTE
• This function does not work under the following input conditions:
1Two pictures from the same source (e.g. INPUT 1 and
INPUT 1),
2Two pictures with different vertical frequency (e.g. PAL and PAL-60, PAL (50 Hz) and NTSC (60 Hz)),
3HDTV signal source (480P/1080i/720P) is input on the right side screen display.
• When you press P&P, the current input is moved to the left side screen display, and the previous input appears on the right side screen display. When the vertical frequencies of the two screens are different, such as in
2 above, you cannot acquire dual screen capability, even if you are pressing the button.
When you cannot acquire dual screen capability, perform one of the operations below.
— Select another input whose vertical frequency is same as one of the current inputs (e.g. PAL and PAL).
— Select a channel with no signal, then press P&P.
• When this function is not available, “No dual screen display available.” will display.
2
3
FREEZE
Update the still image by pressing ENTER.
• Each time you press ENTER, the image on the right screen updates.
Press FREEZE to exit still image.
NOTE
• When this function is not available, “No still image display available.” will display.
• The still image automatically goes out after 30 minutes.
41
LC-26GA5X(E)-i 41 04.12.17, 9:54 AM
Useful features
Teletext language setting
If Teletext information does not display correctly, perform the setting procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Turkish/Greek, Cyrillic.
Each table is compatible with the Teletext languages listed below.
1
Press MENU and the TV MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Text Language”, and then press ENTER.
4
Press a/b to select receivable teletext broadcasting language in your country.
MENU [Setup ... Text Language]
West Europe
East Europe
Greek/Turkish
Cyrillic
• West Europe - English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe - Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Turkish/Greek - English, French,
Scandinavian, Turkish, German, Spanish,
Italian, Greek
• Cyrillic - English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not used to convert between languages.
42
LC-26GA5X(E)-i 42 04.12.17, 9:54 AM
Useful features
Teletext function
What is Teletext?
Teletext broadcasts pages of information and entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather reports, sports information, stock exchange prices and programme previews are among the many services available.
Teletext mode
Teletext is turned on/off with m on the remote control unit. You can operate your TV in Teletext mode directly by inputting commands with the remote control unit.
TELETEXT
TELETEXT
When viewing the Teletext information
• Press CHr to increase the page number.
• Press CHs to decrease the page number.
Button functions
Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
TELETEXT
Turning on and off Teletext
1
2
3
RED GREEN YELLOW BLUE
0 – 9:
Directly select any page from 100 to 899 by using 0 – 9.
WIDE
:
Each time you press WIDE, the TELETEXT image switches as shown below.
Full
Select a TV channel or external input source providing the Teletext programme.
Upper half
Press m to display the Teletext.
Press m again to display the Teletext on the right screen and normal image on the left screen.
• Each time you press m, the screen switches as shown upper right.
• If you select a programme with no Teletext signal, “No Teletext available.” is displayed.
• The same message displays during dual screen or other modes if no Teletext signal is available.
Lower half k:
To reveal hidden information such as an answer to a quiz, press k.
• Press k again to hide the information.
FREEZE
:
To stop updating Teletext pages automatically, press
FREEZE.
• Press FREEZE again to release the hold mode.
43
LC-26GA5X(E)-i 43 04.12.17, 9:54 AM
Useful features
Displaying Subtitle
You can display several subtitles as they are transmitted.
Time display
You can display the time information included in the
Teletext broadcast.
1
2
Press [ to display the subtitle.
• Subtitle is updated by information sent by the broadcasting station.
• To stop updating subtitle automatically, press
FREEZE.
Press [ to exit the subtitle screen.
NOTE
• Subtitle will not be displayed when the service does not contain the subtitle information.
1
Select a TV channel providing Teletext information.
(The time information is automatically captured.)
2
Press DISPLAY. The channel display will appear on the display.
3
Press DISPLAY again within the threesecond interval the channel display is on the screen.
Time information will display on the lower left of the screen for about three seconds.
4
Even when you change the TV channel, you can display the time information with steps
2 – 3 above.
NOTE
• The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 –
4 again.
• If acquired successfully the time information will appear in the upper-right corner of the screen by pressing MENU.
Displaying TOP Overview
When receiving TOP Teletext, you can read a TOP text overview.
1
2
Press m to display Teletext.
Press l to display the TOP Overview as shown below.
TOP Overview screen
I N D E X
BLOCK PAGES
TV PROGRAMS
COLOR BAR
WEATHER
NEWS
MOVIE
LOCAL
SPORTS
BLOCK 1
BLOCK 2
BLOCK 3
GROUP PAGES
FOOT BALL
BASKETBALL
TENNIS
SKI
JUDO
SWIM
GROUP 1
GROUP 2
GROUP 3
GROUP 4
44
LC-26GA5X(E)-i
3
Select the desired block or group by using a/b/c/d.
4
Press ENTER to display the selected block or group pages.
5
Press l to exit the TOP Overview screen.
44 04.12.17, 9:54 AM
Appendix
Troubleshooting
• No power.
Problem Possible Solution
• Check if you pressed POWER on the remote control unit. (See page 13.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 7.)
• Has the power been turned on? (See page 13.)
• Unit cannot be operated.
• Picture is cut off.
• External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off the TV or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not operate.
• Are batteries inserted with polarity (e, f) aligned? (See page 6.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Is the image position correct? (See page 33.)
• Are screen mode adjustments such as picture size made correctly? (See pages
35 and 36.)
• Strange colour, light colour, or dark, or colour misalignment.
• Adjust the picture tone. (See pages 25 to 27 and 37.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 21 and 34.)
• Check the input signal setting. (See page 33.)
• Power is suddenly turned off.
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting. (See page 29.)
• Is sleep timer set? (See page 39.)
• No picture.
• No sound.
• Is connection to other components correct? (See pages 31 and 32)
• Has input signal setup been done correctly after connection? (See page 33.)
• Is the correct input selected? (See page 33.)
• Is picture adjustment correct? (See pages 25 to 27.)
• Is the antenna connected properly? (See page 8.)
• Is “On” selected in “Audio Only”? (See page 33.)
• Is the volume too low? (See page 16.)
• Is “Variable” selected in “Audio Out”? (See page 39.)
• Make sure that headphones are not connected. (See page 10.)
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C (–4°F to +140°F).
04.12.17, 9:55 AM
45
LC-26GA5X(E)-j 45
Appendix
RS-232C port specifications
PC Control of the TV
• When a program is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The communications settings of the TV are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
9,600 bps
8 bits
None
1 bit
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
Return code
Parameter
Input the parameter values, aligning left, and fill with space(s) for the remainder. (Be sure that four values are input for the parameter.)
When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)
0
0 0 0 9
– 3 0
1 0 0
0 0 5 5
When “?” is input for some commands, the present setting value responds.
?
?
?
?
?
46
LC-26GA5X(E)-j 46 04.12.17, 9:55 AM
Appendix
Response code format
Normal response
O K
Return code (0DH)
Problem response (communication error or incorrect command)
E R R
Return code (0DH)
Commands
CONTROL ITEM
POWER SETTING
INPUT SELECTION A
CHANNEL
INPUT SELECTION B
AV MODE
SELECTION
VOLUME
COMMAND PARAMETER
CONTROL
CONTENTS
P O W R 0
I
I
I T G D _
_
_
T V D _ _
A V D
D C C H
*
*
_
*
_
_
_
C
C
I
H
H
N
U
D
P
P
W
1
_
_
0
_
_
_
I
I
I
I N P 1 1 _
N
N
N
P
P
P
1
2
2
2
0
1
_
_
_
I
I
I
I N P 2 2 _
A V M D 0 _
A V M D 1 _
A
A V M D 3 _
A
N
N
N
V
V
P
P
P
3
3
3
M D
M D
0
1
2
2
4
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
POWER OFF (STANDBY)
INPUT SWITCHING (TOGGLE)
TV (CHANNEL FIXED)
INPUT1 – 3 (1 – 3)
_
_
_
_
TV DIRECT CHANNEL (1 – 99)
CHANNEL UP
CHANNEL DOWN
INPUT1 (AUTO)
_
_
_
_
INPUT1 (COMPONENT)
INPUT1 (VIDEO)
INPUT2 (AUTO)
INPUT2 (S-VIDEO)
_
_
INPUT2 (VIDEO)
INPUT3 (AUTO)
INPUT3 (COMPONENT)
INPUT3 (VIDEO)
_ TOGGLE
_
_
_
_
STANDARD
MOVIE
GAME
USER
A V M D 5
V O L M
*
_
*
_
_
_
_
DYNAMIC
VOLUME (0 – 60)
CONTROL ITEM
POSITION
WIDE MODE
MUTE
DOLBY VIRTUAL
DUAL SCREEN
AUDIO CHANGE
SLEEP TIMER
TEXT
COMMAND PARAMETER
H P O S
V P O S
W
W
W
W
W
W
W
M
M
M
A
A
A
T
T
I
I
I
I
I
I
I
U
U
U
C
C
C
W
W
D
D
D
D
D
D
D
T
T
T
D
D
D
I
I
E
E
E
E
E
E
E
E
E
E
V
V
V
N
N
*
*
0
1
2
3
4
5
6
0
1
2
0
1
2
0
1
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
_
_
_
_
_
_
_
_
_
_ _
_
_ _
_
_ _
_
_ _
_
_
_
_
_
_
_
_
_
_
_
_
CONTROL
CONTENTS
H-POSITION ( ⳮ10 – Ⳮ10)
V-POSITION ( ⳮ20 – Ⳮ20)
TOGGLE
NORMAL
ZOOM 14:9
PANORAMA
FULL
CINEMA 16:9
CINEMA 14:9
TOGGLE
MUTE
MUTE OFF
TOGGLE
ON
OFF
DUAL SCREEN OFF
DUAL SCREEN ON
A C H A _ _ _ _
O F T M 0 _ _ _
O
O
O
O
O
F T
F T
F T
F T
F T
T E
M 1
M 2
M 3
M 4
M 5
X T 0
_
_
_
_
_
_
_
_
_ _
_ _
_
_
_
_
_
_
TOGGLE
OFF
SLEEP TIMER 30 MIN
SLEEP TIMER 1 HOUR
SLEEP TIMER 1 HOUR 30 MIN
SLEEP TIMER 2 HOUR
SLEEP TIMER 2 HOUR 30 MIN
TEXT OFF
T E X T 1 _
D C P G * *
_ _
*
TEXT ON (TOGGLE)
DIRECT PAGE JUMP (100 – 899)
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
LC-26GA5X(E)-j 47 04.12.17, 9:55 AM
47
Appendix
Specifications
Item
LCD panel
Model
Number of dots
Video Colour System
TV
Function
TV-Standard (CCIR)
Receiving
Channel
VHF/UHF
CATV
TV-Tuning System
STEREO/BILINGUAL
Brightness
Backlight life
Viewing angles
Audio amplifier
Speakers
Terminals Rear
OSD language
Power Requirement
Power Consumption
Weight
Accessories
Front
LC-26GA5X
26o (65 cm) Advanced Super View & BLACK TFT LCD
3,147,264 dots (1366 g 768 g 3 dots)
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
PAL: B/G, D/K, I, PAL-60 SECAM: B/G, D/K, K/K
44.25-863.25 MHz
Hyper-band, S1–S41ch
Auto Preset 99 ch, Auto Label, Auto Sort
NICAM: B/G, I, D/K A2 stereo: B/G
450 cd/m 2
60,000 hours (at Backlight Standard position)
H : 170° V : 170°
10W g 2
Ø 8 cm 2pcs, Ø 2.5 cm 2pcs
ANTENNA IN
INPUT 1
UHF/VHF 75 q Din type
VIDEO in, AUDIO in, COMPONENT in
INPUT 2
INPUT 3
VIDEO in, AUDIO in, S-VIDEO in
VIDEO in, AUDIO in, COMPONENT in
AV OUTPUT S-VIDEO out, VIDEO out, AUDIO out (Variable, Fixed)
RS-232C D-sub 9pin male connector
Headphones Ø 3.5mm jack (Audio output)
English/Chinese/Arabic
AC 110–240 V, 50 Hz
112 W (0.6 W Standby) (Method IEC60107)
13.0 kg (without stand)
16.5 kg (with stand)
1
NTSC: M
Remote control unit, “AAA” size battery (g2), AC cord, Cable clamp (g2), Antenna cable, Operation manual
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the LCD colour TV.
Please purchase it at your nearest shop.
• Additional optional accessories may be available in near future.
When purchasing, please read the newest catalogue for compatibility and check the availability.
No.
1
Part name
Wall mount bracket
Part number
AN-26AG1
48
LC-26GA5X(E)-j 48 04.12.17, 9:55 AM
Dimensional drawings
568
517
663
100
64 99
278
Unit: mm
LC-26GA5X(E)-j 49 04.12.17, 9:55 AM
49
HOW TO SET THE FACTORY PRESETS
Turn off the TV by pressing POWER on the TV.
After waiting for about 1 minute, press and hold down RESET and press POWER on the TV to turn on the TV.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Password will be cleared after running the factory presetting operation.
You can run the Auto Installation again by using the following steps.
1
Turn on the power of the TV.
2
Press MENU. (Make sure the menu screen displays.)
3
Press c/d to select “Setup”.
4
Press a/b to select “Auto Installation”, and then press ENTER.
5
Press c/d to select “Yes”, and then press ENTER.
The Password is .
NOTE
• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar place.
50
LC-26GA5X(E)-j 50 04.12.17, 9:55 AM
Memo
LC-26GA5X(E)-j 51 04.12.17, 9:55 AM
51
Memo
52
LC-26GA5X(E)-j 52 04.12.17, 9:55 AM
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1 300 135 022
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12)* months from the data of original purchase.
If service is required during the warranty period, please contact your nearest Sharp
Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and remedies under any relevant legislation in the country of sale.
*48 months further parts only warranty for compressors on refrigerators and air conditioners.
IMPORTANT
DO NOT RETURN THIS DOCUMENT TO SHARP
For your reference, please enter the particulars of your purchase below and retain, with your purchase documentation.
TION OF ive
Model No.
Serial No.
Date of Purchase
Retailer
TION OF
. LIMITED ive
SHARP CORPORA uc kland
NEW ZEALAND LIMITED
59 Hugo Johnston Dr
Penrose
SHARP CORPORA
AUSTRALIA PTY ood Dr
ABN 40 003 039 405
1 Huntingw
Huntingw ood NSW2148
SPf or m014 (FEB 2002)
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
Printed on 100% post-consumer recycled paper.
SHARP CORPORATION
Printed in Japan
TINS-B746WJZZ
05P02-JA-KG
A
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Contents
- 3 Trademarks
- 4 Dear SHARP customer
- 6 Supplied accessories
- 7 Preparation
- 7 Inserting the batteries
- 7 Using the remote control unit
- 8 Setting the TV
- 9 Basic connection
- 9 Connecting to an antenna
- 9 Connecting to the power outlet
- 10 Setting the TV on the wall
- 10 Removing the stand
- 11 Part names
- 11 TV (Front)
- 12 TV (Rear)
- 13 Remote control unit
- 14 Turning on the power
- 14 Turning off the power
- 16 Using MPX on the remote control unit
- 18 Basic adjustment settings
- 18 Menu operation buttons
- 18 On-Screen Display
- 19 TV/AV input mode menu items
- 20 Programme setup
- 20 Auto search
- 21 Manual setting for each channel
- 21 Search tuning
- 21 Fine tuning
- 22 Labelling channels
- 23 Setting the booster
- 24 Erase Programme
- 25 Language setting for on-screen display
- 25 OPC (Optical Picture Control) setting
- 26 Picture adjustments
- 27 C.M.S. (Colour Management System)
- 27 Colour temperature
- 27 Black
- 28 Monochrome
- 28 Film mode
- 28 I/P setting
- 29 Audio adjustment
- 29 Dolby Virtual
- 31 Using external equipment
- 31 Displaying a DVD image (Example)
- 32 Connecting a DVD player
- 32 Connecting a VCR
- 33 Connecting a game console or camcorder
- 34 Useful adjustment settings
- 34 Image position
- 34 Audio Only
- 34 Input Select
- 35 Colour system setting
- 36 AV mode selection
- 36 Wide screen signalling (WSS)
- 36 Picture aspect ratio
- 37 WIDE mode
- 38 DNR (Digital Noise Reduction)
- 38 Quick Shoot
- 39 Rotate
- 40 Audio Out
- 41 (for TV input mode)
- 42 Useful features
- 42 Dual screen functions
- 44 Teletext function
- 47 RS-232C port specifications
- 49 Specifications
- 49 Optional accessory
- 50 Dimensional drawings