datasheet for GS102301 by Cherry

datasheet for GS102301 by Cherry
GEARTOOTH SPEED SENSOR
GS102301
Threaded, straight connector gear speed
Sensor rated to 140°C
Features and Benefits
 Capable of operating up to 140°C
 Sealed design meets IEC60529 IP68 standard for
immersion
 Resistant to fuels, solvents and lubricants associated with





Applications




Transmission Speed
Wheel Speed
Engine Speed
Anti-lock braking systems
Dimensions mm
engines, transmissions, brakes and chassis systems.
ESD resistant to 15kV (contact discharge)
Operates at near zero speed
Supplied with installed Viton o-ring
Installs into a standard M20 x 1.5 o-ring port
Mating connector: Packard sealed female connector
assembly 3F
GEARTOOTH SPEED SENSOR
GS102301
Mechanical Specifications
Maximum Air Gap
Maximum Installation Torque
2.0 mm (With Cherry Test Gear)
15*ft lbs
Electrical Specifications
Operating Voltage Range
Supply Current
Output Saturation Voltage
Output Current
Operating Temperature Range
Storage Temperature Range
Ouput Risetime
Output Falltime
Bulk Current Injection
Conduction and Coupling
Electronic Discharge
Radiated Immunity
Immunity to Magnetic Fields
Radiated Emissions
Immunity to AC Fields
Radiated Emissions
9 to 16 volts
6 mA max
600 mV mx
25 mA max
-40° to 140°C
-40° to 150°C
10 µS
10 µS
SAE J1113-4 (250klHz to 500MHz; 100mA/m)
SAE J1113-12 (200V)
SAE J1113-13 (15 kV)
SAE J1113-21 (10kHz to 18GHz; 200 V/m)
SAE J1113-22 (600µT AC Field; 5Hz to 2kHz; 0.2mT & 1mT DC field)
SAE J1113-23
SAE J1113-25 (15kV/m)
SAE J1113-41 (Class 4)
Environmental Specifications
Water Immersion
Dust, Sand and Gravel Bombardment
Vibration
Mechanical Shock
IEC 60529 IP68
SAE J400 JUN80
Sinusoidal vibration max 15g’s from 40 to 2000Hz
18 shocks at 50g’s for 11ms per Mil Std 202F
Mating Connector Information
Connector: Packard MetriPack part number 12162279 or 12162280
Terminals: Packard MetriPack part number 12124075 or 12124076
For best results we recommend targets made
from low carbon cold rolled steel. Other factors
that influence sensor performance include
geartooth height and width, space between teeth,
shape of the teeth and thickness of the target. As
a general guideline consider a target with the
following minimum parameters
Tooth
Height
.200”
Specifications subject to change without notice.
Tooth
Width
.100”
Distance
Between
Teeth
.400”
Target
Thickness
.250”
Contact
Call, fax or visit our website
For more information.
ZF Electronics Corporation
11200 88th Avenue
Pleasant Prairie, WI 53158
Phone:
Web:
262.942.6500
www.cherrycorp.com
E-Mail:
Fax:
[email protected]
262.942.6566
© 2010 ZF Electronics Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement