Monitor Audio Radius HD R45HD, R90HD speakers stands Assembly Instructions
The Radius HD R45HD and Radius HD R90HD are speaker stands designed for use with the Radius HD range of speakers. They provide a stable platform for your speakers and help to improve sound quality by raising them to a more optimal height. The stands are easy to assemble and come with all the necessary hardware and instructions.
advertisement
Radius
45 HD
Radius
90 HD
Radius
Radius
180 HD
225 HD
Radius
Radius
250 HD
270 HD
Radius
370 HD
A s s e m b l y I n s t r u c t i o n s stands
Radius
HD one
Hard Floor
The stand base will come ready for use on hard floors, with the rubber feet pre-assembled into base.
Carpeted Floor
When using on carpeted floor, you will gain better stability and improved sound quality by using the spikes. To use these, simply remove the rubber feet and replace them with the spikes. To remove the rubber feet simultaneously twist and pull them. Then screw the spikes in their place.
Assembly
Place the pole into the aperture in the base and line up the screw holes, ensuring the terminals in the housing at the top are facing forward.. The screw holes are the ones that run from front to back. The cables also needs to be fed through the holes. They run from left to right.
Note: Cables not shown in these two images
Connecting The Cables
When the screws have been securely tightened, the cables should be connected to the spade terminals. The female terminals on the cables simply push onto the male terminals on the stand. The positive is marked with a red band.
Turn the stand over so that it is now the correct orientation. Remove the two button head screws (either side of the terminals) from the back of the R45 HD / R90 HD .
Line the R45 HD / R90 HD up to the terminals, and press into place. Fix in place using the two screws you have just removed.
Monitor Audio Ltd.
Unit 2, 24 Brook Road
Rayleigh, Essex
SS6 7XL
England
Tel: 01268 740580
Fax: 01268 740589
Email: [email protected]
monitoraudio.co.uk
Designed in the United Kingdom
© 2008. Version 2
advertisement
Key Features
- Easy to assemble
- Stable platform for the speakers
- Improved sound quality
- Comes with all the necessary hardware and instructions
- Designed for use with the Radius HD range of speakers
Frequently Answers and Questions
How do I assemble the speaker stands?
What are the stands made of?
What is the height of the stands?
Can I use the stands with other speakers?
Related manuals
advertisement