SF IP Based Fingerprint Access Control & Time Attendance

SF IP Based Fingerprint Access Control & Time Attendance
IP Based Fingerprint
Access Control &
Time Attendance
The SF100 is an IP based fingerprint terminal works both in network and standalone
modes. In network mode, it can connect with ZKAccess3.5 software for access
control and time attendance management.
Wiegand output makes SF100 flexible to connect with ZK or any 3rd party
controllers as a slave reader. Additionally wiegand input allows two units of SF100
to configure with each other and utilize Master & Slave solution, which requires user
verification at both entrance and exit. Meanwhile, anti-passback function can be
used to maximize the security.
Auxiliary input interface allows SF100 to connect with an external source, for
instance, a smoke detector or emergency switch. Once the linkage function is
enabled through the machine menu, the device would generate an alarm signal
and open the door in case of emergency.
• 2.4-inch color display with graphical UI
for easy operation
• Built-in auxiliary input with enhanced flexibility to
link with wired detector or emergency switch
• Up to 24 user-defined schedules that can be
activated on a daily bell alert (optional)
• Up to 15 multi-verification methods to
enhance security level
• Prompt audio acceptance or rejection
signals for valid or invalid fingers
• Standard access control features such as Time zone,
Holiday, A&C Group, Unlock combination etc.
• Compact and lightweight, small size for
86mm (L) x 86mm (H) socket installation
• Duress Alarm offers effective protection
against duress by threats
• TCP/IP or RS485 communication for various
networking environments
• Tamper proof switch and multiple alarm outputs
• Supports USB flash drive for offline
data management
• Multi-languages customizable
2.4-inch TFT (320 x 240) Color Screen
Fingerprint Sensor
ZK Optical Sensor (500DPI)
Algorithm Version
ZKFinger VX10.0
TCP/IP, RS485, USB Host
Fingerprint Capacity
Card Capacity
Records Capacity
Access Control Interface
Wiegand Signal
Aux. Input
Power Supply
Operating Temperature
Operating Humidity
Dimension(W x L x H)
Electric lock, Door sensor, Alarm, Exit button, Doorbell
Wiegand input & output
1ea for linkage function
DC 12V/3A
0 ~ 45°C (32°~113°F)
20 ~ 80%
90 x 90 x 34.5mm
Dimensions (mm)
ZKAccess 3.5
Door Sensor
Electric Lock
ZKTeco (PTY) Ltd
Tel: +27 259 1047
E-mail: [email protected]
Door Bell
Global Offices:
USA: + 1 732-412-6007
EU: +34 916532891
Brazil: +55 31 2515-8326
Thailand: +66-027199154
Mexico: +52-55-52928418
South Africa: +27 12 259 1047
Egypt: +201110444134
Dubai: +971 4 6091 310
India: +91 8123536788
Indonesia: +62 21 2921 8949
© Copyright 2014. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for
identification purposes only and may be the trademarks of their respective owners. All specifications are subject to change without notice. All rights reserved.
Vietnam : +84-0169-5813007
Philippines: +63 9084118832
Russia: +8 915 178-46-81
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF