Cres Cor H137WSUA 12D, 5D, 6D, 12D208, 5D208, 6D208, 12D240, 5D240, 6D240, H138WS18 5D, 34D, 16D, 5D208, 34D208, 16D208, 5D240, 34D240, 16D240 Hot Cabinet Operating and Maintenance Instructions
The Cres Cor 1000-CH-AL Heated Holding Cabinet offers various features to keep food warm and ready to serve. Equipped with a digital control panel, it allows precise temperature adjustment and displays the current temperature inside the cabinet. The unit's insulated walls and doors help retain heat efficiently, reducing energy consumption. Its stainless steel construction ensures durability and easy cleaning. The cabinet's adjustable shelves accommodate different size pans and containers, providing flexible storage options.
advertisement
Insulated
Hot Cabinets
Rev. 0 (7/11)
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
ELECTRICAL SPECIFICATIONS:
Model No.
Volts
H137WSUA12D
H137WSUA5D
H137WSUA6D
H138WS185D
H138WS1834D
H138WS1816D
120
Watts
2000
Amps
16.7
Hertz
60
Phase NEMA
1 5-20P
FL-2355
Page 1 of 6
H137WSUA12D208
H137WSUA5D208
H137WSUA6D208
H138WS185D208
H138WS1834D208
H138WS1816D208
208 2000 9.6
60
H137WSUA12D240
H137WSUA5D240
H137WSUA6D240
H138WS185D240
H138WS1834D240
H138WS1816D240
240 2000 8.3
60
NOTE: The above model numbers are basic models.
They may be followed by letters: M, L, E or ending with S, Z U, and/or HT.
1
1
6-15P
6-15P
HOW TO INSTALL UNIT:
1. Place cabinet on level floor, in a well ventilated area.
2. Unpack and install inner pan slides parts.
3. Plug cord end into proper wall outlet.
FIRST TIME OPERATION:
NOTE: A new oven needs to “burn off” manufacturing oils and excess adhesive before its first use.
Do NOT load food into oven until this has been done!
1. Push the switch on; the light will come on.
NOTE: The letters “LOTPR” (Low Temperature) will show on the control panel until it reaches 140°F (60°C).
WARNING
Air is VERY HOT when door is opened.
2. Turn the control knob to show 220°F. Push the knob to set the temperature. Run the unit for one
(1) hour.
3. Push the switch off the unit off and let cool.
4. Wipe the inside clean with detergent and hot water.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Insulated
Hot Cabinets
Rev. 0 (7/11)
FL-2355
Page 2 of 6
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
"ON-OFF" SWITCH
"HOT HOLDING"
DIGITAL CONTROL
"AQUATEMP"
DIGITAL CONTROL
ACTUAL CABINET
TEMPERATURE
ON-OFF
LOW WATER LIGHT
HUMIDITY READING
HOW TO HOLD:
No water is needed in pan.
1. Push the switch on; the light will come on.
DIGITAL CONTROL NOTES
*Press the “display” button to see the actual temperature inside the cabinet (press again to shut off).
NOTE: The letters “LOTPR” will show on the control panel until it reaches 140°F (60°C).
*Press the “display actual” button to see the approximate relative humidity (press again to shut off).
2. Turn the “Hot Holding” control knob to a temperature between 140°F (60°C) to 220°F (104°C).
Push the knob to set the temperature.
3. Preheat the cabinet for 30 minutes.
temperature inside the cabinet.
HOW TO HOLD WITH HUMIDITY:
Fill water pan with 4 gallons (15 liters) of HOT water.
*Small letters in upper right corners of the displays are:
Hot Holding control: “S” = setpoint temperature
“A” = actual temperature
X:\ENGINEER\FLSHEETS\FL2355 CONTROL PANEL
(in increments of 5)
“A” = approximate relative humidity reading
1. Push the switch on; the light will come on.
NOTE: When the low water light is on, the “A” numbers will not be close to an accurate reading.
NOTE: The letters “LOTPR” will show on the control panel until it reaches 140°F (60°C).
2. Turn the “Hot Holding” control knob to show 140°F.
(60°C.). Push the knob to set the temperature.
3. Turn the “AquaTemp” knob to “95” setting. Push the knob to set the temperature.
4. Preheat the cabinet for 1/2 hour (30 minutes).
NOTE: These settings are based on laboratory conditions and may differ from conditions at the point of use. Experiment with the settings to determine what is best for your application.
HOW TO TURN UNIT OFF:
Push switch off; light will go out.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Insulated
Hot Cabinets
Rev. 0 (7/11)
FL-2355
Page 3 of 6
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
DAILY MAINTENANCE:
WATER PAN
Drain, wipe and fill water pan daily. (Clear vinyl drain hose is provided.)
1. Push hose onto drain nozzle under the cabinet base.
2. Turn knob to open the drain.
CABINET
1. Wipe the inside of the cabinet after daily use.
2. LEAVE DOORS SLIGHTLY OPEN TO FULLY
DRY INTERIOR.
Delime or descale water pan parts as required, to prevent damaging buildup. WARRANTY COVERAGE MAY
BE AFFECTED WITHOUT PROPER
CLEANING.
WARNING
BEFORE CLEANING CABINET:
1. Allow cabinet to cool.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh chemicals.
Cleaning hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
3. Make a test spot with cleaner.
4. Follow manufacturer’s directions on cleaner.
5. Do not mix cleaners.
6. Avoid drips and splashes.
7. Do not use “Cres Clean” on plastic parts or labels.
HOW TO CLEAN THE UNIT:
CABINET
Inside and
Outside
(Stainless Steel)
Soil
ROUTINE CLEANING
STUBBORN SPOTS AND
STAINS
BURNT-ON FOODS OR
GREASE
Cleaner
Soap, Ammonia, or mild
*detergent and water.
Mild abrasive made for stainless steel.
Chemical oven cleaner for stainless steel.
Method
1. Sponge on with cloth.
2. Rinse with water.
3. Wipe dry.
1. Apply with damp sponge or cloth.
2. Rub lightly.
Follow oven cleaner manufacturer’s directions.
HARD WATER SPOTS and SCALE
Vinegar
1. Swab or wipe with cloth.
2. Rinse and dry.
*Mild detergents include soaps and non-abrasive cleaners.
NOTE: Gaskets are removable for cleaning.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Insulated
Hot Cabinets
Rev. 0 (7/11)
FL-2355
Page 4 of 6
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY
TROUBLE-SHOOTING CHART:
FAILURE:
1. Switch light or control display does NOT light up.
2. Unit gets too hot or won’t shut off.
3. Unit does not heat.
4. No humidity
POSSIBLE CAUSE:
1a. Circuit breaker/fuse to wall outlet is blown
1b. Cord is unplugged from wall outlet.
1c. Switch is “OFF.”
1d. Switch or control defective.
2a. Relay or control defective.
UNPLUG UNIT FROM WALL OUTLET
3. Defective heater, relay, blower or control.
4a. Low water
4b. Air temperature set too high.
4c, Defective heater, relay or control.
Controller (Thermostats) Error codes: err 00 - Temperature probe defective err 01 - Water fill time out
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Insulated
Hot Cabinets
Rev. 0 (7/11)
FL-2355
Page 5 of 6
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
REPLACEMENT PARTS:
Blower Kit
Heater Kit, Air
Heater Kit, Water
High Limit (water pan)
High Limit - 400°F
Power Cord
Relay, Solid State
Switch, Power
Thermostat Control (Hot)
Thermostat Control (Humidity)
Thermostat Probe
Terminal Block
Transformer
Vent Fan
2000W
1000W
1850W
2000W
1000W
120V
0769-180-K
0811-022
0811-297
0811-271
0848-060
0848-033
0810-065-12
0810-029-06
0857-136
0808-125
0848-092-01-K
0848-092-02-K
0848-091-K
0852-119
0769-197
0769-165
208V
0769-182-K
0811-185
0811-298
0811-271
0848-060
0848-033
0810-039-07
0810-039-07
0857-136
0808-125
0848-092-01-K
0848-092-02-K
0848-091-K
0852-119
0769-197
0769-174
240V
0769-182-K
0811-023
0811-299
0811-271
0848-060
0848-033
0810-039-07
0810-039-07
0857-136
0808-125
0848-092-01-K
0848-092-02-K
0848-091-K
0852-119
0769-197
0769-174
Door, Complete
(Stainless Steel)
Door, Gasket
(Stainless Steel)
Door Hinge
Door Latch
Door Handle
Handle, Side Pull
Casters, 5”
Casters, 5” w/brake
UA12/UA6/1834/1816
UA5
UA12/UA6/1834/1816
UA5
1221-579
1221-
0861-185
0861-250
0519-074-K
1006-122-01-K
0911-111
0911-087
0569-306
0569-306-B
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Insulated
Hot Cabinets
Rev. 0 (7/11)
FL-2355
Page 6 of 6
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H137WS18...D Series
Humidity Holding Hot Cabinet
WIRING DIAGRAM: 120V
WIRES 1 AND 2. REPLA WITH WIRES 41, 42, 43, 44 AND WIRE AS SHOWN: POWER SWIT
VENT FA VENT FA
AIR PR
L1 T1
A2(-)
A1(+)
UPPER FL
LOWER FL
L1 T1
A2(-)
A1(+)
DOWN OPPOSITE SIDE FR
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
advertisement
Key Features
- Digital temperature control
- Humidity control system
- Stainless steel construction
- Easy to clean
- Durable and reliable
Frequently Answers and Questions
How do I set the temperature on the hot cabinet?
How do I clean the hot cabinet?
What are the different model numbers?
Related manuals
advertisement